AE CS6 Windows 8 it's progressively slow in rendering

Hi.
I'm working with AE CS6, Windows 8, intel Core i7-2600, 8Gb RAM, NVIDIA GeForce GTX 550 Ti (1 GB).
My problem is that I'm rendering a lot of comps in HDTV, the only two effects applied to each clip in are Selective Color and Keylight. When I start the queue, takes about 20 minutes to render one clip, then 1 hour for the second one, then 3 hours for the third one, then EIGHT HOURS for the fourth one. For comps of the same duration and effects (about to 4 minutes each comp).
If I stop the queue and restart my computer, render takes again 20 minutes, 1 hour, and so on.
I've try to clean system cache, copy files to an internal hard disk (before I was working with an USB hardisk), simplify the adresses. But I still don't know what to do.
I have to render close to 50 comps, if them takes about 8 hours, the render will finish never! I'm desperate.
THANKS A LOT, and sorry for my poor english.
Hope you have the answer or the solution...

What are your Memory & Multiprocessing settings?
See this page for information about memory and improving performance in After Effects: http://adobe.ly/dC0MdR
Make sure that you've installed the latest updates ( http://adobe.ly/lsrkmJ ). They fix a lot of problems, including some memory management issues.

Similar Messages

Dreamweaver CS6 and CC both very slow page rendering under Mavericks

Dreamweaver CS6 and CC both very slow page rendering under Mavericks compared to 10.8.5
Any ideas?

One other thing I am seeing:
When I open any document (html, javascript) inside DWCC now, then close it without any changes, DW asks if I want to save changes.
I just tested this under 10.8.5 and there is no lag there, nor are documents mysteriously modified when opened.
Note: I have tested this both with and without other Apps or extensions running in Mavericks and 10.8.5

Adobe Photoshop CS6 Very Slow On Rendering Type

I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P
2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
Windows 7 Ultimate x64
AMD Radeon HD 7690 2GB
8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
The file size when blank is about 56.1 GB.
The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
Could you give me some tips to solve my problem?
Thanks

300 ppi for a banner that size is categorically not normal. Guaranteed.
Get specific instructions from the shop that is going to print it.
You keep confusing ppi with dpi. The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch. The precise terminology is as follows:
DPI = Dots per inch = units used to measure the resolution of a printer
LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
Here's a link to a discussion that may interest you:
http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
It includes the following chart and subsequent comments :
"The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
"Viewing Distance   Present Study
20 feet    greater than 10 LPI
18 feet    18.75 LPI or greater
16 feet    18.75 LPI or greater
14 feet    37.5 LPI or greater
12 feet    37.5 LPI or greater
10 feet    50 LPI or greater
8 feet     65 LPI or greater
6 feet     85 LPI or greater
4 feet     100 LPI or greater
2 feet     133 LPI or greater
1 foot     150 LPI or greater
6 inches   150 LPI or greater
"Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
Talk to your printer. I suspect they will want a file at under 75 ppi, or even much less. Follow the printer's advice/request.

Photoshop CS6 pentool reaction rate was slower than the first use of Photoshop CS6 pentool. I wonder the fundamental cause and solution rather than optimization.

Photoshop CS6 pentool reaction rate was slower than the first use of Photoshop CS6 pentool. I wonder the fundamental cause and solution rather than optimization.

I have no problem with CS6 Pen tool performance. Its instantaneous. I'm using Windows 7 Pro and CS6 version 13.1.2. on a Dell workstation PC.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Use illustrator CS6 Windows in a Mac ? I've got a pc and want to work on an imac, but is there no way to use my softwares adobe windows ?

Hi.
All is in the title.
If anyone could answer me.
I've got a licence illustrator CS6 windows, and It would sound me incredible, not to be possible use it on mac.
Thanks a lot.
Aurélien

Thanks a lot Mylenium.
Another question, please : I still have a little doubt with terms (I'm french and my english is not perfect). If I request a platform swap for Illustrator CS6, the new platform product still will be a CS6 ? Because switch to the new version CC would be as if I hadn't yet bought a licence (a subscription would mean pay twice...).
Thank you for your answer.
Aurélien

Since download of Firefox Hello desktop & laptop both on Windows 7 are very slow even after refresh, download history removed and anti virus software turned off

Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?

Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?

Problem resizing PS CS6 window in Mountain Lion

I recently migrated my data and software from a 27" iMac to a new 13" MacBook Air. I found that my CS6 window is sized beyond the boundaries of the 13" screen. I was able to drag the window sideways far enough to pull the right side within the 13" destop, but the bottom of the window is still below the bottom of my desktop and I cannot grab it or grab the corner to pull it up.
I imagine that resetting CS6 to original defaults would fix the problem, but I have lots of saved actions and other settings that I do not want to loose.
Any ideas?

gener7 wrote:
Clicking the green button in the upper left part of the CS6 app frame and/or doucument window…
Thank you for at least selecting an icon with a plus sign in it. I'm often baffled by advice referencing just a green, red or amber/yellow button, as I haven't seen one of those obnoxious color candy buttons in years, since I use the Graphite look on my Mac. I know many other folks do too.
I can't begin to understand how some other users go for the so-called "Blue" appearance that generates the colored buttons. I find them very distracting in Photoshop and feel they interfere with my perception of color in my images.
My point is just to politely and respectfully request that posters helping others refer to the buttons either by position or function rather than color, so one can immediately know which of the three buttons is meant.
</ off the soapbox >

Adobe photoshop cs6 windows on mac book pro

i have purcheased the adobe photoshop cs6 windows for my new mac book pro....not realizing that this would not work. i cannot return the software. is there a way to install onto my mac without using an external drive? thank you

you need a cross-grade: http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Hide document window and set progress bar window in front...

Hi everyone,
We have created the batch script to generate artlink reports from multiple inx files and writing it into a text file.
Our script will open each document from the selected folder and generating the art link reports. From starting to end of the process the progress bar window will takes place to show the status of the process. The concern is, the progress bar window has been sent to back after opening of each document. Is it possbile to minimize the documents window, so the progress bar window alone displayed in the screen as front most window.
Can anyone look into this and help me out. Thanks in advance.
Thiyagu

Hi Thomas,
Thanks for your kind help. Its working greatly. Sorry, past two days i was outstation so i am unable to reply you.
Once again thanking you.
Regards
Thiyagu

Bookmark menu becomes progressively slower

When first starting Firefox accessing the bookmark menu is fine and highlighting an item by mouse over is almost instantaneous (although not as instantaneous as either Opera or IE8).
After Firefox has been open for a while >1hour the menus and mouse over responses becomes progressively slower to respond until it becomes almost unusable, each mouse over taking nearly four seconds to highlight a bookmark. It is about this time that I have to close firefox and use Opera or IE8 which is a bind if the bookmark is not known to these clients.

You're welcome

Where is Dreamweaver CS6 Windows 7 64bit Installer

I have a new PC and I wanted to transfer my Dreamweaver CS6 license into it.
I've been googling around the web for Dreamweaver CS6 windows installer but I cant seem to find.
This link is not even working also
http://prodesigntools.com/adobe-cs6-direct-download-links.html
and this
http://prodesigntools.com/trials2/AdobeProducts/DRWV/12/win32/Dreamweaver_12_LS16.exe
Please help

When using the prodesign site you need to follow the Note: Very Important Instructions section verbatim in order for the download to work properly. Those steps essentially set you up as signed in to the Adobe site so that the files can be downloaded.

Cannot move photoshop CS6 window around on screen, it is stuck in one spot

cannot move photoshop CS6 window around on screen, it is stuck in one spot

Hi there,
Thanks for your response. I have since fixed the problem by unplugging my
external monitor and restarting my computer.
Best,
-Jake
On Fri, Jun 13, 2014 at 3:21 AM, c.pfaffenbichler <[email protected]>

Need help for school! Imported images suddenly pixelated (CS6, Windows)

Hi guys,
Adobe InDesign CS6 Windows I'm a frequent user of InDesign, but I now suddenly am facing problems. Note: I use InDesign not only for print material, but also for creating PDF. I therefore do not necessarily need 300 dpi. Before: copy + paste from Photoshop or even web images into InDesign used to work. The images looked fine on screen and while printing. Now, when I import or copy + paste, all images look pixelated at 100%, high quality and overprint preview. It looks like InDesign is importing images 25% larger than their original size. If I resize the imported image to 75%, the image looks normal. 100% is always pixelated now! Did I mess up some sort op setting? I never had this problem before. Please help me, need this for school assignment!
Thanks in advance,
Justin

First of all, thank you for your reply. I just checked an example image and both are 72 dpi, in InDesign as well as in Photoshop. I even created a document for web in InDesign, using the 'web' & digital publishing option (which is 72 dpi) and placed the same image. At 100% pixelated, when resizing to 75% crisp. I don't know what to do..
The thing is.. I've never had this problem for years.. with importing images. Did I change settings or?
First one is Photoshop, second in InDesign (top left is import at 100%, bottom right is import resized to 75%). In case images are too small to see, full size: http://justinwust.com/photoshop.jpg & http://justinwust.com/indesign.jpg

I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?

I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?

If you are talking about the serial number, as far as I know serial numbers are entirely numeric so there is no need to enter letters. Maybe you are using the incorrect code.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

(Photoshop CS6 Windows)UIが全体的に崩れている

Photoshop CS6 の Windows 版を利用しています。
UI が突然崩れて表示されるようになってしまいました。
直前に行った操作は Windows Update ぐらいしか思い当たることがありません。
Windows 自体の再起動をしても改善されません。
Photoshop の再インストールぐらいしか手がないのでしょうか？

ご回答ありがとうございます。
ご指摘いただいた通り、MacType を使用しておりますが、除外設定や無効にしても解消しませんでした。
また、スプラッシュ画面が下記のようになっており、フォントの読み込みがほとんど行われなかったため、フォントキャッシュの再構築を試みましたがこれも解決には至りませんでした。
本体画面の方は下記のようになっています。
オプションバーのあたりがつぶれていますが、一方でメニューは問題なく表示されています。
Photoshop 側で、自動でサイズ調整される文字列が正しくサイズ取得されていない、またはサイズ設定されていないように見えます。

AE CS6 Windows 8 it's progressively slow in rendering

Similar Messages

Maybe you are looking for