AE doesn't see my video card anymore...

I am not sure what happened. A week or two ago, I checked and AE (CS3) saw and was using my openGL video card (Nvidia Quadro FX 570) but today, I checked and openGL is not an option anymore ("no compatible openGL card can be found"). It is not listed in preferences/previews, and is not an option under my comp window. But the card is evident and working when I check under Device Manager. I have the latest drivers for the video card. Any ideas?
--Dell Precision Workstation w/dual quad core
--4 GB of RAM w/ 3GB switch enabled
--Plenty of HD space

ooops. This is kind of embarrassing to admit...I had removed the openGL plugin last week because AE was crashing and I thought it might help. DOH!!! Sorry to waste people's time. :o(

Similar Messages

  • Any fix for "CS5 doesn't see my video card"?

    I know there have been threads about CS5 not recognizing video cards on Windows 7 64-bit machines.  I was looking to see if any progress has been made in solving that problem.  My searches don't turn up anything.
    I'm running CS5 on a Dell 1645 with Core i7 820 and an ATI Mobility Radeon 4670 1GB.  The card has the latest drivers, is functioning properly, and is one of the cards Adobe lists as "supported" for OpenGL.  However, CS5 does not detect the card, and Enable OpenGL is grayed-out.
    I tried the workaround suggested in another thread, adding an "enable old GPUs" line to the registry, but that didn't work.  Is there any other fix?
    Doc_Pit

    Out of curiosity, do you have any "mirror" driver installed - i.e., something like PC Anywhere or RAdmin or other package designed to allow someone else to control your user interface?  These are known to get in the way sometimes.
    There is a registry tweak to force Photoshop to use the OpenGL features of your video driver.  It's for diagnostic use only, but it could serve as a workaround until you can get to the bottom of the driver problem (perhaps it will be solved in an upcoming release of the ATI drivers).
    Some of the information in this thread might help you:  http://forums.adobe.com/message/2954477
    Note that the registry tweak is good for diagnostic purposes, and enabling GPU acceleration where Photoshop does not believe the driver can support it can lead to instability and crashes, with loss of data.  It will be interesting to know whether the ATI mobility drivers can support proper OpenGL operation on your system.
    -Noel

  • My macbook pro doesn't communicate with video projectors anymore

    Since a while, I cannot use my macbook for video presentations anymore.
    The video beamer doesn't "see" my laptop, and in the display screen, no other screens are indicated.
    Anybody out there who can help?

    Make sure the discs are free of finger prints. The optical drive cannot read a disc with smudges and dust.
    Check Finder > Preferences > General
    Make sure:  CDs, DVDs, and iPods, is selected.

  • Won't really see a video card in the PCI slots

    I have a G4 MDD 1.23 GHz. I have a 32 MB video card in the AGP slot, but I also have 2 PCI 128 MB video cards lying around.
    Every time I try to throw a PCI video card in, though, I have problems. The image is only 640 x 480 grayscale, nothing else. I tried to change the settings, but those are the only options.
    I have a 3DFX Voodoo 2 and a TwinTurbo 128. Do I need drivers? Does the MDD not support video cards in the PCI slots? What's wrong with this picture?

    For what it's worth, here's a few quotes:
    [IX Micro Twin Turbo 128 video card, and I understand that OS X does not like that particular card|http://www.mail-archive.com/[email protected]/msg43189.html]
    [The TwinTurbo cards are no longer supported by OS X (10.3).|http://forums.macosxhints.com/archive/index.php/t-30258.html]
    [Just think of this along the lines of 3dfx's unsupport for the Voodoo3 on Macs.|http://www.insidemacgames.com/news/story.php?ArticleID=4213]
    [Voodoo is not supported with OSX...but forget it for Jaguar and most other versions|http://www.mail-archive.com/[email protected]/msg02720 .html]

  • AIM(PC) doesn't see the video in a one-way video conference from me iChat

    I'm using an iMac running iChat v 3.1.5. The other end is using a PC running AIM v 5.5, with the ports opened on the windows firewall, but she cannot see the video coming from me. We both get audio, just no video for her. She gets a black screen. How do we fix this?

    Hi TonyBar3,
    Even though she has not got a camera has she tuned the app for A/V chats
    6:53 PM Tuesday; June 20, 2006

  • MacBook pro doesn't see camera memory card

    I have a problem with my new MacBook Pro and my Konica Minolta Dynax 7d. When I connect the camera to the MacBook with USB cable, I can't read the memory card, che doesn't appear on the desktop.
    When I am on windows 7 on Bootcamp, it work well, but when I am on windows 7 whith parralel Desktop, it doesn't work.
    What would be the problem ?
    Thank you.

    Hi James Cook2,
    If you are having issues with an external USB card reader when used with your MacBook Pro (but that works with other computers), you may find the troubleshooting steps outlined in the following article helpful, in particular the portion about checking with the manufacturer to verify compatibility and any updated drivers:
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    Regards,
    - Brenden

  • New osx mavericks doesn't see my sd card

    Hi All
    I downloaded the new OS X Mavericks and I want to download a tune from Itunes onto my sd card .
    when I load the card into the computer it always showed on my desktop.  but not now?
    When i go to remove it a little box pops on screen warning me that the sd card hasnt been properly adjected.
    But how do I find it on my desktop to start with?
    Thanks
    Tricia

    I have already used this sd card on my imac, it's not a new card.
    The only thing thats changed is I downloaded the new maverick.
    Obviously it's having a hissy fit and doesnt like it!!!
    I dont really want to lose all the info and photo's etc if I can avoid it. but, if there is no other way, that's what i'll have to do.
    Alternatively I'll buy a new card and start again.
    Thank you very much for your help. I much appreciate it .
    Tricia

  • I have a iPhone 4s that doesn't have a sim card anymore, how can I facetime just by using wifi on the phone?

    I need to use my iPhone for Facetime, without the phone having cellular service. How can I do so?

    Is the phone activated?  If so you can activate facetime and use it with wifi.  If the phone is not activated you need to activate it using a SIM (the sime doe snot need to be an active sim) and hten turn on facetime in settings/facetime

  • HOW COME QT PRO DOESN'T SEE MY CANON XL2 ANYMORE?

    repeating my question a little louder.

    I did reply yesterday, but the moderator removed my post (for expressing an opinion, politely!), the third time this has happened.
    Basically your problem is likely to be QT 7.3. Do and archive / install, and get back to QT 7.2x as soon as you can.

  • Apple TV 1G doesn't see my AirPort network anymore

    I have an 1st-gen Apple TV with a 160 GB drive, which started having trouble connecting to the master iTunes library. I reset it to factory conditions using its menus.
    After rebooting from that it failed to connect to my home network. It neither discovers it, nor can it connect to the network, when I spell out the SSID explicitly.
    Probably this failure to get on the wireless network was the problem in the first place. Does this problem mean that my Apple TV is broken?

    I thought that it might have something to do with the Timed Access Control in my AirPort Extreme base station, which only lets clients onto the network that have a MAC address already in a whitelist on the AirPort Extreme. Turning that feature off on the AirPort Extreme didn't change anything in terms of allowing my Apple TV onto the network. Plus, the Apple TV's MAC address had been programmed into that whitelist all along.

  • Z97 Gaming 9 AC not registering Video Card

    Motherboard doesn't see the video card, I've updated Bios twice, board had ver 1.0 installed then upgraded to 1.7 and now to 1.7B1, replaced the video card with others 780i, 680, 580 they all work on other motherboards including the 980. 
    Have cleared CMOS a few times.  Only video output is coming from the cpu itself.  Have tried different power supplies, changed wiring, different memory sticks, single stick etc.  Board Explorer in bios doesn't show any of the video cards since first boot-up thru my changing all the parts I could think of, they all work in other rigs.  Can't think of anything else to troubleshoot. 
    Took it out of case and did the bare stuff, keyboard, mouse, boot drive and video card and still no dice.  Anything I might be missing?

    >>Posting Guide<< Also useful piece of info 

  • Itunes doesn't play the video anymore

    Help! ITunes doesn't play the video clips anymore just the sound works.
    I've restarted, quit the other applications but no result.
    What can I do ?
    Thank you for your suggestions.
    ITunes 8.1
    QuickTime 7.6
    Mac OS 10.5.6
    Mac Pro 2x3 GHz
    RAM 8 Go

    If you are playing through remote speakers, iTunes 8.1 will not play the video. Previous versions would play fine using only the computer's speakers, but 8.1 requires the remote airtunes speakers be deselected.

  • Flash Media Encoder Doesn't display my video input from my All-in-Wonder 2006 AGP card

    I have a All-in-Wonder 2006 AGP video card that has multiple video inputs. I got Flash Media Live Encoder to see my video card but when I connected one of the many video inputs it would not display in Flash encoder video preview. The audio did not come through either. I'm running in Win XP and the video card model number I believe is All in Wonder 2006 AGP 256M NA.

    What is the output format of this card? Is it encoded such as mpeg-2 or raw?

  • Windows 8.1 not recognizing my video card

    I found this link of something similar to a forum thread that was never completed! I have the same problem this guy had last year, but he never responded if their fixes worked for him. So far, I've tried both boot camp 5.1 driver versions and neither has worked for me. The version for the older macs didn't allow me internet access, so I realized something was wrong, then switched to this newer model bootcamp 5.1 and am not seeing my video card at all!
    My system is a mid 2014 MacBook pro
    16gb Ram
    512gb Flash drive
    intel i7 quad core 2.5ghz
    graphics card (unknown!) I think it is supposed to be a GeForce 750m or 850m or something like that... but I can't find it while in boot camp.
    I've tried every fix I can think of, from searching for drivers on the internet (which doesn't really work when bootcamp doesn't even recognize the hardware in the first place), to reinstalling the bootcamp drivers... again. Someone please help!

    Wow, nevermind. Trying the 5.1.5 for a second time fixed my problem. It is now registering my GeForce 750m and my Archeage game is running beautifully on very high settings! Why oh why didn't it work the first two times...

  • Video card for capturing HD

    I had problems capturing HD footage using Canon GL camera and it had something to do with the HD device on my mac.
    *Do I need a different video card to capture HD?*

    Hi(Bonjour)!
    What is the exact model of your camcorder? a GL1 or GL2 ? Those models do not do HD.
    See FCE HD 3.5 user's manual (help menu) from page 207 to see how to capture HDV from HDV camcorders.
    FCE HD doesn't support capture cards, and the capturing process doesn't involve specific video card requirements.
    Michel Boissonneault

Maybe you are looking for

  • How do I set up a mixer with a reverb bus and send to it?

    I'm just starting with STP so forgive me if this is a stupid question, okay? I'm using Soundtrack Pro exclusively for multitrack audio. I will typically have 8 audio tracks I import into STP, each of which has its own channel strip in the mixer. I ha

  • Calculation of basic date and schedule date

    I update material master from routing with CA97 to material master work scheduling data with base quantity 1000 When MRP running, planned order for 54000 PCS is schedule with work scheduling data. when i schedule planned order (change) the calculatio

  • Mouse click to open and click and drug does't work

    Having problem click to open and click to drag with my mouse. I try to many things to change but nothing works. And my Mozilla is too slow

  • How do I get my contacts off of my old BB and onto my new iPhone?

    Alright I have a new iPhone finally. I have an old BB curve that has all my contacts. These contacts are not saved to the sim card. I was told you can do something with outlook or something else that will take all of my contacts names, numbers emails

  • Why is CD / DVD Sharing so incredibly limited

    Take a look at this technote: http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US I am refering in particular to: Note: These types of discs or activities are not supported by DVD or CD sharing: DVD movies. Audio CDs. Copy protected disc