AE Error message: Unable to locate plugin "Boris Red 3.0 FCP Filter"

I have edited a project in FCS HD and went back to make some changes and now when I open the project I get an error message that says "Unable to locate plugin "Boris Red 3.0 FCP Filter."
I used the Boris Red application to make some effects and had no problem with this before. I have located the filter in the users library/Application support files but I can't get Final Cut Pro to accept it. I went to the Boris Red website and found no help there, nor have they responded to my requests for assistance so I thought I would look here.
Another user posted this same problem at another website and the responses he got were not useful either. Can anyone help?

I re-installed the program and nothing changed. How do I retro FCP?
The older version I used does not work on Intel Mac Pros and the graphics card it requires is also obsolete. (Actually, it died and couldn't be replaced which forced me to drop my G5 and get a new MAc Pro which started this whole nightmare in the first place!)
So am I screwed? There really is no way to fix this and save all that work now? I have the After Effects program so would it be better to just forget about Boris altogether and redo the entire project in After Effects?
If so, I can't believe what a waste of time and money Boris is. All because FCP cannot locate ONE filter? When the filter is sitting right where it is supposed to be?

Similar Messages

  • HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

    Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • While running an update in Itunes i received an error message - Unable to locate component because AVFoundationCF.dll was not found. Then Itunes was not installed correctly. Error 7 (windows error 126) Do I have to reinstall and will I loose all my music?

    While running an update in itunes (not installing), it stopped in the middle of the update and i receceived the following messages:
    Application failed to start because AVFoundationCF.dll was not found. Reinstalling itunes may fix the problem. Then "itunes was installed incorrectly. Please reinstall itunes Error 7 (Windows error 126)".  If i uninstall and reinstall itunes will I lose all of my music, etc.?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

    I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open.  First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Error message "Unable to load plug-in type"

    Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
    post create and update but we are getting this error on any entity updates and creates..
    Any help on how to resolve this issue with be deeply appreciated.
    thanks in advance,
    Future MVP

    While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
    What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
    The solution I have is:
    a. Import just the plugin assembly without the new plugin steps, and publish.
    b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
    c. The solution should now be imported successfully.
    What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
    By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
    HTH anyone else experiencing the same issue.
    Henri

  • ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

    Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3.  I tried ADE 4 but no better.  I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient.  Does anybody know what's wrong?  Thanks.

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • Using Bridge CS5 exporting to flickr get error message "Unable to connect to Flickr, please check your internet connection and try again."?

    using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again."  please help?

    I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
    Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014!

  • I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization.  Please try again after some time."

    I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization. Please try again after some time."

    ok, please try below steps,
    1. Quit ADE.
    2. Choose Start > Run.
    3. In the Open text box, type regedit and then press Enter. The Registry Editor opens.
    4. In the left pane of the Registry Editor, locate the following registry key:
         HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Right-click the Adept key and choose Delete.
    6. In the Confirm Key Delete dialog, click OK.
    Your authorization will be deleted.
    ADE will be deauthorized now.
    Now Authorize ADE again.

  • Error Message " Unable to start Intel My WiFi Technology"

    Setup: Lenovo W520 on Windows 7 Pro
    After Lenovo Software Update, the Intel WiDi was updated.  
    Then I run the program " Intel WiDi". I received an Error Message " Unable to start Intel My WiFi Technology"
    I try to troubleshoot and did the following
    1. Uninstall WiDi in the "Control Panel". However, i received an error message from Windows Installer --"Error opening installation log file. Verify that the specified log file location exists and is writable"
    Any suggestions on how to reinstall the Intel WiDi

    Did resolve it also! But NOT with the LENOVO UPDATE!!!
    Take a look at this Intel webpage:
    http://www.intel.com/support/wireless/wtech/iwd/sb/CS-031109.htm
    it describes what we must do to get it running!
    1. I did download the new PROSET WiFi and the WiDi driver
    2. deinstall the WIDI and PROSET Wireless drivers from LENOVO
    3. then intall the new drivers from INTEL in the order described above!

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

    I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen :  root. ChangeLocation.ChangeLocationStart".   I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
    btw, I have plenty of free space on my device.  HELP!!!
    I tried Handmark support several times, to no avail.  Thanks very much.  mike

    I'm having the same problem.  Have tried uninstalling, reloading, nothing.  Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option.  Help please!

  • Error Message:  Unable to load Acrobat Reader control

    Error Message:  Unable to load Acrobat Reader control.  Please make sure it is correctly installed. The user I am dealing with has Adobe_Reader_9.4.4 & AdobeAcrobatStd911-L.  Can you give me some assistance as to why she is unable to open her file.

    That file only? And before version X, Adobe did not recommend having Acrobat and Reader installed in the same Win computer...

  • N79 (Error message :Unable to open .File type not ...

    Dear nokia service manager,,
    Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
    hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
    pls reply me..its very urgent...thanku..

    You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

  • Error message - Unable to find proxy server - how can I solve this problem

    When I try to enter some sites I get the error message: Unable to find the proxy server, Firefox is configured to use a proxy server that can't be found. This happened suddenly and I'm not sure why or how I can fix it, it doesn't help that most help site are blocked. Im using a Mac 10.5.8 and Firefox 15.

    You can check the connection settings.
    *Firefox > Preferences > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Maybe you are looking for

  • Recovery mode is not work

    Hi, I'm trying to go to the recovery mode of my Muvo TX usb 2.0, but it is not working. Is de procedure for the Muvo TX the same as the Muvo 2? I read the topic about the recovery mode, but?I can't succeed. Or does someone has another solution for my

  • Problem in Dequeuing from AQ Adapter

    I Have Problem in Dequeuing my BPEL Process is able enqueue the message to B2B but it is not able to Dequeue the same message from the Queue. Interesting point some times My process is able to Dequeue the message and some time it is not able to Deque

  • ISE blacklist

    Wondering if I could have a group of black listed devices point to a web page that says "contact Helpdesk" or something like that. Rather than the user not connecting and complain that wireless sucks. Not knowing their devices was blacklisted. Any id

  • Email messages won't download on Mac Pro but do download on iPhone.

    Email messages won't download to Mac Pro but do download on iPhone 5. I've made no changes in the settings on added any updates, etc. When I "check for new mail" I hear an ping - a tone I normally don't get but no messages appear. Thanks in advance f

  • MS office outlook 2013 issue

    we are using the outlook 2013.we are facing some option in hide mode like FROM,SUBJECT ETC.it is hide when i click on search tab.how to unhide please explain.