AE Errors - Memory

Hi,
I have been experiencing some seriously annoying AE problems.
I'm experiencing these exact same issues on both:
- iMac osx 10.9.4 3.2GHz Intel Core i5 processor - 8GB 1600 MHz DDR3 memory
- Macbook Pro osx 10.9.4 2GHz Intel Core i& processor - 16GB 1600 MHz DDR3 memory
It all starts with the error when trying to RAM preview:
Which occurs between the 2nd or 3rd time I try to RAM Preview (Resolution set to Third) after opening my file.
After getting this note I notice that on my activity monitor AE is consuming about 4.67GB of memory
After pressing OK and scrub through the timeline I get this error right away:
After pressing OK this one follows:
After pressing OK this one follows:
After pressing OK this one follows:
I press OK and wither I get the following and AE crashes:
Or I get back to the second error and this Errors Spam loops over and over again until I panic, try to save the file and get this one again
I have no way to either save my work, nor even work! It's like this ae file is completely drown in AE errors.
No matter what machine I work on I will get the same errors over and over again.
1 - I tried to purge Memory and Disk Cache - Problem remains
2 - I tried to work in Quarter resolution - Problem remains
3 - Switching Multiprocessing On or Off - Problem remains
The only thing that fixes it is actually forcing quit on AE and opening again. But after my second or third RAM Preview it gets the same errors over and over again.
I am out of ideas, does anyone knows how to fix this?

Hi Mylenium,
thanks for your reply,
Not so sure about the plugins as I do not have any external plugins installed.
As for the Codec, I have no idea how it would influence the workflow.
This problem does not occur while working on lighter AE files.
I've experienced the "RAM preview needs 2 or more frames to playback" error quite often in the past but I can say it could be related to the low RAM on my old mac but I've never experienced such a persistent problem like this one, even our new Mac Pro can't handle it.

Similar Messages

Internal error: "memory.cpp", line 593 with PXI 8175

Hi,
I have created a program with Labview RT 7.0 which makes acquisition, storage and display of data with PXI controllers 8175.
I used Datasocket for the data display on a deported computer.
Because of the number of the Datasocket tags used, instead of sending values all the time, I'm sending value for the deported computer only if the user needs to see it.
For example : if the user needs to see data, so only Datasocket tags for data display will be active, and if the user needs to see parameters values, so only parameters datasockets tags will be active. And, if the display program is in "standby" mode, almost all datasocket aren't active.
So when the user needs to see data values, he opens the data values window of the display program, and then, the datasockets tags for data value are now active, but : sometimes at this moment, the PXI stops with an "internal error "memory.cpp" line 593"!
The only solution is to manually reboot the PXI, the programmatically reboot doesn't work in this case of error. But it is far away from the displaying computer.
The error happens regularly after a 2 weeks period of standby. So I though about a memory overflow, I checked all the arrays, and none of them is growing to the infinity.
If someone knows about this problem, I will be very happy to learn about how to get rid of it!!!
Best Regards,
G Liagre
Best regards,
G Liagre

Hi Rob, Hi Matthieu,
Thank you for your reply.
I found in the database many reply about this error, but none of them were helpfull for me.
I tryed your link to the knowledge data base, but the error described there is for dll association in LabView and interface nodes.
I didn't used any interface node in my code.
The problem is that I cannot test my program on the PXI because I don't have access to it rightnow (only by remote desktop, and with a 56k modem..)
Let me give you a part of this huge code.
I suspect this part of the code to be the one which create the problem, but it's not sure.
If you find something obviously wrong, tell me!
Best regards,
G Liagre
Best regards,
G Liagre
Attachments:
Communication.zip ‏931 KB

Error "memory could not be read" running some Crystal XI reports

I have a few crystal reports that work some times on a PC then after being run a few times get the following message. The report doesnt load and get a microsoft error:
"memory could not be read"
This happens on all spec of PC from low memory PCs to high memory PCs.

Reboot the computer. I have this issue occasionally with a high-mem computer.

Adobe form Error "Memory protection fault in OLE container control"

Hi,
I am getting the error "Memory protection fault in OLE container control" while trying to open the layout tab of adobe forms.
I am getting this error for all the adobe forms.Please let me know the solution.
Thanks in advance.
Thanks,
Nuthan.

I can reproduce this error consistently.. This is how: Install Microsoft SQL Server 2008.
As soon as I remove SQL 2008 the error went away. Adobe LiveCycle Designer was invoked via OLE2 interface. Apparently SQL Server 2008 (as in my case or some other applications in your case) modified the way OLE2 behaves and therefore causes this error.

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command R) for rendering, cordially

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command + R) for rendering, cordially

Do you use still images in your edit? Make sure all your images are RGB (not CMYK etc).
Hope it helps
Andy

Fatal Internal Error: "Memory Manager.cpp", line 547

Hello,
I am using LV 2009 and I am also getting an error as follows:
=======================================================
Fatal Internal Error: "Memory Manager.cpp", line 547
LabVIEW version 9.0.1
You will lose any unsaved work. For assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
=======================================================
I get this error when I start executing steps on TS 4.2.1 as well as when I do "Unload All Modules" in TS. Please find the attched logs. Further, I could not run anything in TS and need to restart the PC to re-run the sequence after everytime this error occurs.
We have transited through LV 8.0, 8.2, 8.5 and now 2009 over past 4 years for our project and this is the first time I could see this error.
Please help.
Thanks.
Attachments:
lvlog2010-06-09-10-06-07.txt ‏2 KB
lvlog2010-06-09-18-52-36.txt ‏1 KB
lvlog2010-06-09-19-16-20.txt ‏2 KB

Adding on to Pritam's post:
For the earlier "Fatal Internal Error: "Memory Manager.cpp", line 547" , we found that a couple of our dll's which were developed in LV 8.5.1 had not been recompiled in LV2009. After recompiling each of them in LV2009, and then running the same sequences in TestStand,this error vanished.
But now again we're seeing this error, and that too only on 3 PCs systems out of 5 PCs!
The same installer has been installed on all 5 sytems (after removing the earlier installers and running MSI Blast.exe them).
The error now appears again, only when we try to exit TestExec.exe and another tool built in LabVIEW.
So everything works fine and tasks are performed,etc, but when we close the window or try the exit that program, the "Fatal Internal Error: "Memory Manager.cpp", line 547" pops up.
If we say "OK" to it, the window closes, but the Task is seen still running in the Task Manager and has to be manually terminated (End Task).
Does anyone know what could be going wrong?

"Fatal internal error:"memory.cpp",line 593"

I need some help.
Can some please explain what i am doing wrong here. i have created a Dll from a LV 7.0 vi. The header file looks something like this:
typedef struct {
long dimSize;
double elt[1];
} TD2;
typedef TD2 **TD2Hdl;
typedef struct {
double f0;
double df;
TD2Hdl magnitude;
} TD1;
void __cdecl Spectrum(double freq, double amp, TD1 *Spec);
And i have the following code where i allocate memory and attempt to call 'Spectrum':-
TD1 *Power;
double frequency=10, amplitude=1;
Power = (TD1 *) malloc(sizeof(TD1));
(*Power).magnitude = (TD2**)malloc(sizeof(TD2));
*(*Power).magnitude = (TD2*)malloc(5000*sizeof(TD2));
(*Power->magnitude)->dimSize = 5000;
for (i=0; i<500;
i++) {
(*Power->magnitude)->elt[i] = 0;
Spectrum(frequency, amplitude, Power);
I keep getting Fatal internal error: "memory.cpp", line 593" when it tries to call Spectrum. I believe i have allocated memory correctly although i may be wrong. (I was getting 'exception' errors before). The VI i used to create the Dll contains a basic 'Function Generator' (sine wave) and a 'Power Spectrum'.
I have looked at the Knowledge base and dll examples that come with LV 7.0 and have tried setCINArray and NumericArrayResize but have not had any luck. It seems like the documentation is for LV 6.0 and 6.1.
Has anybody seen this or have any idea why i am getting this?
Thanks

> Can some please explain what i am doing wrong here. i have created a
> Dll from a LV 7.0 vi. The header file looks something like this:
>
> double frequency=10, amplitude=1;
> Power = (TD1 *) malloc(sizeof(TD1));
> (*Power).magnitude = (TD2**)malloc(sizeof(TD2));
> *(*Power).magnitude = (TD2*)malloc(5000*sizeof(TD2));
>
> (*Power->magnitude)->dimSize = 5000;
>
> for (i=0; i<500; i++) {
> (*Power->magnitude)->elt[i] = 0;
> }
>
> Spectrum(frequency, amplitude, Power);
>
> I keep getting Fatal internal error: "memory.cpp", line 593" when it
> tries to call Spectrum. I believe i have allocated memory correctly
> although i may be wrong. (I was getting 'exception' errors before).
> The VI i used to create the Dll contains a basic
'Function Generator'
> (sine wave) and a 'Power Spectrum'.
> I have looked at the Knowledge base and dll examples that come with LV
> 7.0 and have tried setCINArray and NumericArrayResize but have not had
> any luck. It seems like the documentation is for LV 6.0 and 6.1.
>
It looks to me like you are constructing arrays to pass to LV using
malloc, instead of the labview.lib functions for creating or resizing LV
array handles.
You should refer to the manual on Calling External code for details on
the construction of an array.
Greg McKaskle

Profile error: Memory access violation (data fetch)

Hello,
I have VI with a lot of mathematic Nodes. When I try to profile it, I allways get this error: "Memory access violation (data fetch)".
Keil uVision shows this error:
"Memory write not possible (Real-Time Agent)
Memory read not possible (Real-Time Agent)"
Without profiling the VI works on the MCB2400. And profiling also works if I try very simple examples.
bye & thanks
amin

Hi Amin, Alex,
I noticed this issue had been open for some time, so I decided to post directly to save time.
Thanks,
Jaidev Amrite
LabVIEW Embedded PSE
Diagnosis: So apparently, this behavior has nothing to do with the profiler. The culprit is the Advanced Analysis SubVI call (Mean.vi) in BB.vi.
Mean.vi has a call library function node inside it and this CLN is configured to run in its own thread (labVIEW spawns a new thread for each call). Probably due to bad thread management on the ARM (in this case), this call causes a memory violation.
Solution:Turn off the "Run in any thread" setting on the CLN as shown in the attached screenshot - change it to "Run in UI Thread". For good measure also turn off reentrancy on Mean.vi (second screenshot)
National Instruments
LabVIEW Embedded Product Support Engineer

Error memory magenta print cartridge CP1215

Hello. I ask for help.
On the printer, hp Laserjet CP1215 there is an error: "Error memory magenta print cartridge"
Cartridge a new, out of the packaging, as well as all the rest.
What advise?
p.s.: It is possible will help initializing NVRAM. How to do this?
Thank's.

Прийдется избавиться от принтера.... печально

Import terminates with error Memory fault(coredump)

Hello All,
I am trying to import the data from 9.2.0.8 to 10.2.0.4 on HP UX 11i.
After some times i get error
Memory fault(coredump)
and import job gets disconnected. There are no other logs/ errors reported even at the db level nor at import job.
Request to help if some body knows about the cause.
Thank you,
Anil

Hi,
I'm also experiencing this error.
Some info on my databases
[EXP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[IMP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[Common]
Machine Type: HP-UX B.11.11
The import job terminates and leave a file named core which is sized to the amount i placed in the buffer. How do i proceed on this one? Thanks.

Generating error - memory to low

Hi all
plz check the followig code this i m using for finding the trial balance in FI module..
but this code is generating error - memory to low ,
and generating short dump at run time with msg the memory space is not enough for an internal table
we have 1 GB RAM ...
can anyone suggest some tips for fine tuning of this code
start-of-selection.
select * from bkpf into table itab_bkpf
 where bukrs = p_bukrs
 and gjahr = p_gjahr
 and budat in s_budat.
if sy-subrc = 0.
select * from bseg into table itab_bseg
 for all entries in itab_bkpf
 where bukrs = p_bukrs
 and belnr = itab_bkpf-belnr
 and gjahr = p_gjahr
 and gsber = p_gsber
 and hkont in s_hkont.
thanks and regards
jitendra

u used a bseg table( cluster table) it has huge amount of data......
declare internal table as occurs 0.
only selet those field which are required.
start-of-selection.
select * from bkpf into table itab_bkpf
where bukrs = p_bukrs
and gjahr = p_gjahr
and budat in s_budat.
if not itab_bkpf[] is initial.
select * from bseg into table itab_bseg
for all entries in itab_bkpf
where bukrs = p_bukrs
and belnr = itab_bkpf-belnr
and gjahr = p_gjahr
and gsber = p_gsber
and hkont in s_hkont.
endif.

Nokia C5-03 Error: Memory full. Close some applica...

Hi,
I purchased this phone mainly to use for Navigation and phone, but disappointed by the error shows up every time when you are in need while using Map.
I do not have any extra applications running other than it came with. I have closed all the running application which running map. Phone software and Map is upto date with version (V22.0.007 and 2.45 on map) Earlier versions also same problem. Currently the available memory shows 27.2 MB)
I tried all the solutions given in /t5/Hardware-Codes-and-Operator/Nokia-C5-03-SIM-memory-full-but-NO-SIM-MESSAGES/m-p/1260683#M25236, but no use. Same error.
Is there any way out other than choosing another phone and brand?
Regards
Simon
Moderator's notes: Post moved into it's own thread.

I am completely frustrated with this phone (Nokia C5-03). I originally wanted a smartphone but didn't want to buy the brand leader like everyone else so I thought I could rely on a Nokia. I have had this phone for less than 12 months now and I have already done a full reset TWICE and have lost all of my information. On both occasions when the memory problems starting occurring with the phone I tried to back up my info to my PC but the phone told me that I had "not enough memory to perform operation"!!!! I am now getting memory full messages every 10 minutes and the phone will do nothing for me.
There is nothing left on the phone to delete. I had my email synched to the phone originally for about two weeks but had to get rid of it as it was slowing the phone down. I never connect to the internet with the phone - I mean NEVER. In browsing the web for solutions I am constantly finding varied and interesting comments about clearing the cache via the web app (I cannot connect to the web on the phone now - NOT ENOUGH MEMORY TO PERFORM OPERATION) and connecting my phone to a PC and browsing the memory to find out what the "other files" are (NOT ENOUGH MEMORY TO PERFORM OPERATION) or even downloading software onto the computer, running this in the background as I connect phone to PC in order to clear the memory (NOT ENOUGH MEMORY TO PERFORM OPERATION).
I reiterate that I use the phone for nothing other than SMS and calls. I had images on the phone but they are long gone. I have done two full resets to factory default settings and I'm facing another one and I am beyond frustrated. Please dont tell me to connect to my PC (see above) dont tell me to connect to web via phone (see above). My phone memory is showing 22MB SIS applications (which I understand I cannot get rid off) and 46MB other files (WHY????) I reiterate that I do not (and now cannot) browse the web on the phone, I don't use e-mail on the phone, all I do is sms and calls. WHY WHY WHY is my phone not working? Is there anything to be done with this phone or do I put it out of its misery?

Upon exiting LV7: Application Error-Memory could not be read.

Upon terminating my application, I get the following error:
"LavVIEW: LabVIEW.exe - Application Error
The instruction at referenced memory at . The memory could not be 'read'."
So far the error seems non-critical. It does not appear to affect the performance of the program in any way. However, it is certainly unnerving for my end users (not to mention me)!
The error occurs in both the executable and the debugging mode. I have traced it to the VERY END of my application, which runs flawlessly until the very moment when I use the Exit instruction. I have also tried using Close FP with Abort VI, as well as Close FP with Exit. All threads in my application have successful
ly terminated, so aborting does not stop any action in mid-execution, as far as I am aware.
Searching for others in the forum who have had similar problems has turned up little useful help. Could this be a bug in the (god forbid!) runtime engine?!
Here's a link to a discussion of the closest thing I could find to my problem.
Thanks for any help you can give. Any whatsoever.
-Nick
"You keep using that word. I do not think it means what you think it means." - Inigo Montoya

> Hmmm... I'll look into it. Many or all of the DLLs that I call were
> written in Delphi, which has at least three string types that come
> into play: regular Pascal String, PChar (Delphi's re-creation of the C
> string type), and the ShortString type, which is sized to 256 bytes
> (if memory serves). From your response, it sounds as if I should
> search for those DLLs that use the ShortString type.
>
> Also, I encode many complex data forms and pass them into the DLLs as
> array pointers. These also sound like places to start looking.
>
> Thanks for the input. If I ever track down the problem, I'll update
> this discussion for posterity. In the meantime, if anyone else out
> there has any more thoughts, I'd sure appreciate them.
To h
elp track it down, if you can build a debugging version of the
Delphi DLLs, especially something that will validate memory references.
One of the great tools for tracking down memory overwrites is a well
implemented debugging memory library. Also, if you have some notion of
DLL calls that write to the string and return it to LV, that would be
the first place to look. And in the end, the solution is usually to
look at the assumption of the DLL and send in a larger preallocated
string. So in some cases it is easiest to look for the strings and
arrays going into DLL node calls and one at a time give them large input
sizes looking for the closing crash to go away. Then when the symptom
goes away, look at the code for that DLL.
Greg McKaskle

Application Error - memory could not be read

Hello all,
we are having a problem with certain users of Manager Self Service (MSS) that have a large number of staff available to report upon.
This problem occurs whenever these managers run any report for more than 63 employees. The IE error is:
iexplorer.exe - Application error
The instruction at xxxxxxxxx referenced memory at yyyyyyyyyy. The memory could not be "read".
OK to terminate.
CANCEL to debug.
The session closes whichever button is clicked so we can't view any expanded error help.
Could anyone please tell me where to look to determine the reason for this error - for example, would it be in the portal error logs or should I run an R3 trace?
Has anyone encountered this error before?
Many thanks in advance,
Keiron.

Hi Dion,
Check the Product Availiblity Matrix in Service Market Place and check the IE compatablity with your portal and business package version.
Note : If this is not working then mention your portal, business pacakge and IE version.
Reagrds,

When trying to save photos get error (memory RAM, CS6)

After working on the photo, if you try to keep getting the error
could not save as ***.jpg because there is not enough memory ram. try saving without optimization or as baseline jpeg
My notebook config:
core i3 M380. 2.53 GHz
memory 2gb
hdd ~ 40gb free disk C.
graphic integrated
Adobe Photoshop CS 6 13.0.1.1
Windows 7 32bit
PS Preferences:
     Memory used
     Available RAM: 1531 Mb
     Let Photoshop Use: 995 Mb (65%)
Scratch Disks:
     C:\ 42.59 Gb Free Space
     D:\ 41.23 Gb Free Space

You have the bare minimum RAM for the program to launch. Running it well is a different matter.
You don't have nearly enough available drive space on that C drive to accomodate both the swap files of the OS and a Photoshop scratch disk. Your D drive is woefully short on space too.
My system is bare bones minimal and I have a dedicated 250 GB hard drive as my primary Photoshop scratch drive.
The error message you are getting means exactly what it says.

Flash Player Install Error: Memory can not be "written"

Actual error (with fake addresses because I get a different address each time it fails this way) is
CAPTION: iexplore.exe - Application error
TEXT: "The instruction at "0x99999999" referenced memory at "0x99999999". The memory could not be "written".
So far I have used the uninstall_flash_player.exe and tried the reset_fp10.cmd with the MS subinacl.exe tool. I have used a registry
scrubber (RegScrubXP) and re-tried all of the above. I still can not get the flash player to load and I still get the error each time I try. I have run IE8 manage add-ons and the flash player is not listed. I am at my wit's end, I have searched everywhere and tried everything. This is a brand new computer with very little other than MS products loaded. Nothing is loaded that is not loaded on my other 3 computers that run flash player 10 just fine. I have run complete diagnostics on mt Thinkpad t500 and all checks out.
Machine: Lenovo ThinkPad model 2242CTO
Processor: Intel Core 2 DUO @ 2.53 Ghz
Operating System: Windows XP Professional SP 3
Browser: Microsoft IE 8

I had the same problem as previous described. Some how I lost Flash Player. The first indication I got was when I went to Utube site and tried to view aa clip. It came back with an error saying I had java turned off or Flash Player was not installed. It gave me link to install flash player and tried to install it and failed with memory written error. The error message also said it was coming from Abode DLM. I was also at the point that a banner appeared that said an Adove system was trying to install and add on DLM. This also caused IE to hang and it took quite sometime to close the IE to get out this hang condition with a bunch of error reports being sent to MIcrosoft. After going to Sun System and testing my Java which it said was ok, I tried to install flash player. Same thing happen.again. I download Flash Player uninstall and ran it. Tried install again. Same results. I found Adobe tech note how to uninstalled DLM. I found none of the modules that it indicated should be deleted. I tried installing Acrobat Reader which I already have on the system same error. I found this forum and tried manual loading of Flash Player and that worked. Now things are working ok except that if I try to download Flash player It still fails but the error has changed a little. I hear the beep to approve the install of DLM addon but IE fails cleanly and when I close the window said had the following error. I think the problem is DLM add on related.
I am running IE V 8.0.6.001.18702
Internet Explorer has closed this webpage to help protect your computer
A malfunctioning or malicious add-on has caused Internet Explorer to close this webpage.
What you can do:
Go to your home page
Try to return to adobe.com
More information

AE Errors - Memory

Similar Messages

Maybe you are looking for