AE is not using more than half the CPU power for rendering

hi,
Excuse my ignorance, but I really can't understand why this is happening:
Multiprocessing is on.
CPU: FX 8350
RAM: 16GB
Any advice will be much appreciated. I'm really frustrated as I think 5 hours render time for my 10 minute footage is way too long...

Sometimes, CPU processing is not the bottleneck.
5 hours is not at all an unusual amount of rendering time for 10 minutes of video when using heavy effects, 3D, etc.
See this page for resources about making Adobe Premiere Pro and After Effects work faster: http://adobe.ly/eV2zE7

Similar Messages

  • How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

    How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
    This is only 8.3% of the available disk drive space!
    http://digital.ni.com/public.nsf/allkb/E7E2F5657B6​026358625750B007201A6?OpenDocument
    National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
    Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
    http://upload.wikimedia.org/wikipedia/commons/9/90​/Hard_drive_capacity_over_time.svg
    Drives as large as 126GB or more have been around since about mid 2002.  That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB!  Please NI.  Do something.
    We deserve fixes to the old versions of LabVIEW RT.  How about updates to LabVIEW RT.  Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
    We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions. 
    Kevin. 
    Message Edited by kmcdevitt on 05-29-2009 03:39 PM
    Solved!
    Go to Solution.

    Coq rouge wrote:
    NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future 
    Coq Rouge (formerly t06afre),
    The RealTime OS is an NI Product that is purchased from NI.
    NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
    For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States. 
    Yes, 126GB is some space.  I see that there are now 2TB drives available.  126GB would be 6.3% of a new 2TB drive.  Should we all be happy with being able to use 6.3% of the available drive space.  Moore's Law seams to be alive and well.  Drives larger than 126GB have been readily available for 5 or 6 Years.  This should not be a surprise to NI.  Why don't they do something about it.
    Thanks for the trivia on Bill Gates.  I must have missed that one since I don't try to keep up with Microsoft.  I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement".   The world needs more like him.
    What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
    McKevin.  

  • Using more than one PU and PC for the same database

    I have a scenario described here: [http://www.seamframework.org/Community/UsingTwoParallelNestedConversationsWithParentAtomicConversation|http://www.seamframework.org/Community/UsingTwoParallelNestedConversationsWithParentAtomicConversation]
    which uses Seam, EJB3, JPA, Hibernate, Richfaces (modalPanel) and JSF.
    The question I have is the following:
    is there any negative consequence (memory consumption, performance hit, etc.) of using more than one persistence unit in the persistence.xml that points to the same EntityManagerFactory? I was thinking of having one PersistenceContext (Seam-managed PC - an extended PC which is conversation-scoped) which uses one PU and reserving the other PC for the modalPanel forms and backing beans (SFSBs).
    The reason I needed to use this solution/approach is so that when using Hibernate MANUAL flush with SMPC, I can achieve isolated synchronization of the PersistenceContext without updating values in the modalPanel forms and vice versa.
    Any tips on best practices or alternative solutions? thx.
    persistence.xml snippet:
       <persistence-unit name="boBETS">
          <provider>org.hibernate.ejb.HibernatePersistence</provider>
          <jta-data-source>java:/boBETSDatasource</jta-data-source>
          <properties>
             <property name="hibernate.dialect" value="org.hibernate.dialect.SQLServerDialect"/>
             <!-- <property name="hibernate.hbm2ddl.auto" value="validate"/>   -->
             <property name="hibernate.show_sql" value="true"/>
             <property name="hibernate.format_sql" value="true"/>
             <property name="hibernate.generate_statistics" value="true"/>
             <property name="jboss.entity.manager.factory.jndi.name" value="java:/boBETSEntityManagerFactory"/>
             <property name="hibernate.default_catalog" value="boBETS"/>
             <property name="hibernate.default_schema" value="dbo"/>
          </properties>
       </persistence-unit>
       <!-- using boBETS2 for ListValueParamAction for now! trying to isolate the em.flush() such that we can achieve atomic conversations for the
       base form as well as the popup form! -->   
       <persistence-unit name="boBETS2">
          <provider>org.hibernate.ejb.HibernatePersistence</provider>
          <jta-data-source>java:/boBETSDatasource</jta-data-source>
          <properties>
             <property name="hibernate.dialect" value="org.hibernate.dialect.SQLServerDialect"/>
             <!-- <property name="hibernate.hbm2ddl.auto" value="validate"/>   -->
             <property name="hibernate.show_sql" value="true"/>
             <property name="hibernate.format_sql" value="true"/>
             <property name="hibernate.generate_statistics" value="true"/>
             <property name="jboss.entity.manager.factory.jndi.name" value="java:/boBETS2EntityManagerFactory"/>
             <property name="hibernate.default_catalog" value="boBETS"/>
             <property name="hibernate.default_schema" value="dbo"/>
          </properties>
       </persistence-unit>What happens if I were to have 10 PUs and 10 PCs in the same app? Whether they're all pointing to same DB or not. What's the consequence of using "too many"?

    Yes, you can use multiple iCloud accounts in multiple User Accounts on one computer, but, as you know not multiple iTunes Match accounts. Keep in mind that the two services are not the same.
    Since you've posted your question to the iTunes Match forum, which it really doesn't pertain to, you might want to also post it to the iCloud on my Mac forum.

  • HD-DVD created with DVDSP will not use more than one subtitle track

    I have made an HD-DVD with DVD Studio Pro 4.1.2, and added 4 subtitle tracks. When I play the dvd on a Toshiba A1, Apples DVD player and in the emulator I can change the subtitle track in the way that I can see the country code is changing, but no matter what it will only show me the subtitles from the first subtitle track. If I try to change the subtitle track using the remote, I can only turn the first subtitle track on and of, not switch between the different subtitle tracks. I'm a skilled dvd author, and have had several other authors look into the project finding no errors in my programming, so could this be a bug in DVD SP? Does it not allow more than one subtitle track?

    Could be a bug in DVDSP. Also could be a bug in the players firmware. DVDSP never really made it has a fully functional HD DVD authoring tool.

  • Kernel_task is using more than 250% of CPU and My Macbook Pro (13 inch i7 8gb Ram Mid 2012) is getting heated, when ever running Facetime or Games.

    When ever i try to use FaceTime or Counter Strike GO my CPU gets more than 250% usage and my mac gets really slow.. This is the same when ever i try to run any middle end applications not extreme ones. Tried googling and apple support communities uninstalled all my 3rd party softwares. any help??

    The kernel is using excessive processor cycles. Below is a partial list of causes for this condition.
    Thermal overload
    This can be due to accumulation of dust, high ambient temperature, or to the malfunction of a cooling fan or temperature sensor. The kernel tries to compensate by throttling back the CPU's. You might see messages like the following in the Console window:
    SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
    The timestamps of those messages (if any) indicate the times, since the log was last cleared, when a processor was being throttled because of high temperature.
    Note that if the problem is caused by a faulty sensor that reads too high, there may be no actual overheating.
    The Apple Hardware Test, though not very reliable, is sometimes able to detect a bad fan or temperature sensor.
    Using Apple Hardware Test
    Encryption
    Transferring large amounts of data to or from an encrypted disk image or FileVault volume puts an extra load on the kernel. If both the source and the destination are encrypted, the load may be doubled. If you transfer data from an encrypted disk image on an encrypted partition to another such image on another encrypted partition, the load may be quadrupled.
    This issue probably doesn't affect late-model Macs with an Intel i-series, recent Xeon, or later processor. Those processors support hardware-accelerated encryption. You can determine what kind of processor you have by selectingAbout This Mac from the Apple menu in the menu bar.
    Installed software
    User-installed software that includes a device driver or other kernel code may thrash the kernel. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility bycompletely disabling or removing the software according to the developer's instructions, or booting in safe mode (with the shift key held down at the startup chime.) Note, however, that disabling a system modification without removing it or booting in safe mode may not be as easy as you think it is.
    Corrupt NVRAM or SMC data
    In some cases the issue has reportedly been resolved by resetting the NVRAM or the SMC.

  • Using more than 4 quadrature encoder input for MyRIO

    Hello,
    I am doing a project where I need to drive 6 motors, each with quadrature encoder feedback to control position. 
    Currently, I've been using the MyRIO Encoder VI's, but there's a limit to 4 encoders. What is the best way of reading 6 encoders simultaneously with the MyRIO?
    Thanks,
    Timothy
    Solved!
    Go to Solution.

    If you need to modify the myRIO FPGA personality you have a few options.
    The best option is to start with the myRIO FPGA sample project, add and remove components as needed and then build your bitfile.  Any registers (LV FPGA controls / indicators) you don't modify will still work with the Advanced IO VIs and Express VIs.  In order to use the new bitfile (FPGA Personality) you'll need to update the Open FPGA VI Reference in myRIO v1.1 Open.vi (LabVIEW 2013\vi.lib\myRIO\Common\Instrument Driver Framework\myRIO v1.0\myRIO v1.1 Open.vi).
    After doing this any time you use a myRIO Express VI or Advanced IO VI it will use your custom bitfile.  Any peripheral channels you've left in place will continue to work.  Any channels you've removed will still show up in the VIs, but will not work (they will probably throw errors at runtime) and any new channels you added will not show up in the VIs.  For new channels you'll need to use the FPGA Read / Write nodes to read and write the configuration and data register you created in the FPGA personality.  These changes will persist on that computer until you change the Open FPGA VI Reference back to the original bitfile.
    Let us know if you have questions about any of this.
    Thanks!
    -Sam K
    LabVIEW Hacker
    Join / Follow the LabVIEW Hacker Group on google+

  • HT4623 hello, my iphone 4s is stuck in recovery mode, i tried to restore it using itunes but when it reach more than half the restore point it stops and restart and go back to coonect to itunes. please help me

    please note that my ios is 6.0.1

    http://support.apple.com/kb/TS5314?viewlocale=en_US&locale=en_US
    https://discussions.apple.com/message/23941722
    more
    iphone ERROR 4013

  • Can you not use more than one instance of Safari at a time

    I can't use my IE browser because of problems in my other post.
    I also need to have multiple windows or browser sessions open at once and Safari will only seem to open one session at a time.
    Is this the case?
    How do I get around it?
    If I open Safari, and click the Safari icon again it just sits there and won't open another session.
    Thanks,
    Tom

    Between "New window" and "New Tab," the tab is the way to go for the needs I believe you are expressing. However, tabbed browsing may not be enabled by default.
    To make the tab bar always visible--and therefore easily make new tabs by control-clicking the tab bar--open Safari Preferences. Select "Tabs" and, in that pref pane, select "Enable Tabbed Browsing" and "Always show tab bar." There are also some keyboard shortcuts shown there.

  • My ipod was stuck on shuffle and a new battery will not register more than half charged.

    another forum suggested I  reset the ipod and it might fix both problems,
    Knowing I had the entire 6 gigs of my library in itunes I, though the reset will
    clear my ipod  but I would restore from I tunes, after the reset all but a few songs
    were gone...i've searched my drive with no success where is my music?

    i had a similar problem with some songs... one thing i notices is that if you are using "priated" mp3's that have a bit rate anylower then 220kbps and dont have the Attributes listed as A (rightclick on mp3->properties->details)wont work on the ipods.. they will read but only up to a point an then they stop or skip to the next song... if you really like the song i would just pay the $1 for it on itunes...or try downloading from sites like Filestube.com where it takes it links to sites that have good quailty file onsite...
    i know its not very techy and probilly not much of help but its a way around the issue......

  • How to use more than one indirect valuation module for the same wage type

    Is it possible and how to use the u201CIndirect valuation based on master data: ICOMPu201D configuration to default the NUMBER and at the SAME TIME to use u201CDefine valuation of base wage types usingu201D to default the AMOUNT from one/two WTs ?

    You can use the the same wage type for both number and amount but you can't assign 2 indirect valuation method for the same wage type at 1 time. I would rather suggest you to go for some customer specific indirect valuation instead of the standard one. You can use BAdI HR_INDVAL for the same.

  • "Other" taking up more than half the space?

    I suppose this has already been asked.
    O have no pics, no music, just a few reading apps and books on my 16GB ipad. Up to 7.4!!! GB is taken up by "Other"
    What is this and how do I get rid of it?
    Thanks
    J

    Basically, "other" is any non media content on your iPad .... App data, notes, Safari Bookmarks and history, calendar entries, text messages, contacts, and so on. It is content associated with apps but not the media itself.
    You may have had a corrupt sync or have a corrupt file on the iPad and you may find out that you will ultimately need to restore the device to factory settings and rebuild the iPad in order to get rid of the bloated "other".
    But before you do that, try restoring from a backup, if you have one.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    If that doesn't work, try the first two fixes in this article, and you can try the third if you like, but you can make that assessment on your own.
    http://appchronicles.com/04/too-much-valuable-space-taken-up-by-other-category-h eres-how-to-fix-that/
    If none of that works, you may may have to restore the iPad to factory settings and start all over again and add all of your content back after restoring.

  • Iphone 5 , more than half the apps are sitting as 'waiting' permanently

    Hi,
    I got a new iphone5 on Thursday, 70% of my apps are appearing as normal, the others are appearing as if updating. They are shaded over like i was doing an app update of information, it says  "waiting" - its been 4 days...............  obviously a bug??
    Next, my facebook, comes up with an "unable to connect, put in your password in setting.  If I press cancel - it takes me straight to my facebook open page, if I go to settings and put in the password like it asks, its says incorrect.  I am pretty sure its the right password.
    Help me please ....

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Can not use more than 1 stick of ram ?

    msi k8n neo, athlon 3200+ co stepping. msi,rx9800 pro,kingston kvr333x64c25-512.enermax,eg485p-vhb 480 watt. system runs flawlessly with one stick in slot 1. if i try to run 2 sticks of ram system crashes or locks up .talked to tech support on the phone.they said to increase ram voltage to 2.6 volts i did this and system ran longer before locking up again .3 sticks of ram wont even boot up ! all memory works great in my nforce2 board .all memory works in slot 1 ,but if i add 2 or 3 sticks it flat doesnt like it at all.if anyone could please help me with this i would greatly appreciate it. ps im goin to buy some better memory if anyone has some suggetions on what to buy that will work properly ,please let me know,  ty. also all my settings are stock .except i did set memory to 166 mhz thats it .everthing else is on auto .bios is at 1.2 have all the newest drivers installed.4.7 catalyst .5.03 nforce 3 driver.power supply specs 3.3v-34a  5v-40a. 12v-16a.  480 watts. 1x maxtor 80 gig sata 1 master. sony 52x32x52 cdrw master. pioneer dvr106 slave. sony floppy.1.44 mb. thermaltake venus 12 cpu cooler.windows xp sp1a home edition. cpu ia a clawhammer core. sh7-co.

    thanks for the links bud. im a newbie for sure. i still havent found the answer yet  but i think after looking at what works well in the ram that works well with this board im going to purchase some corsair twinx xms 3200c2pt 2x512mb. if this dont work, im gonna give this pos to my brother. lol  if there is any other info i need to post let me know. ty

  • Premiere Pro CS5 never uses more than 15% of CPU, so, performs much slower than premiere 6.5!

    Hello.
    I'm doing wedding videos for quite a while. My hardware included DV500DVD card and premiere 6.5, CPU is Core 2 Duo E8400, 2GB of RAM, Windows XP SP1 (DV500 can't work with SP2 or SP3).
    The above mentioned system is quite old, and absolutely not usable for HD videos. So, I've decided to build another machine. The configuration is as follows:
    OS: Windows 7 Professional 64 bit.
    M/B: Asus LGA 1155, H67 chipset.
    CPU: Intel Core i7-2600K
    RAM: 4GB DDR3
    HDD: 2x 64GB SSD, 4 x 2TB SATA (RAID) (All HDDs connected to separate PCI-E controller, so intel chipset flaw is not an issue here)
    I've recently downloaded and installed the trial version of Premiere Pro CS5, to see, how it suits to my needs. And I'm very dissapointed. I've started premiere, selected DV-widescreen preset, inserted two static pictures on timeline, and did an alpha blend between them. Then put movie to export. Not only it took way too long time to render, but it only used single core, and cpu usage is only 15% ! Just for curiosity, I've installed premiere 6.5 on same system, and it did that task about 10 times faster!
    What is this, limitation of trial version, or just Premiere Pro CS5 can't be used with this modern CPU ?
    Thanks in advance,
    Alex

    First off 4GB of ram is really to low for CS5. CS5 is 64 bit for a reason and requires far more ram. 2nd, what video card are you using?
    As for the opteron system the other poster listed, you could get the lower end Intel platform and easily out perform that opteron system. A Geforce 450GTS video card would out perform that Quadro by 2 or 3 times and that card is barely over $100.
    No offence but you can't run CS5 on minimal or very old specifications and expect the same results as everyone else or older software. If you can't upgrade the hardware then I suggest staying with the previous version until you can. The MPE engine requires allot of resources to function especially ram and your lower spec or older system will just bottleneck the pipeline rather than speed things up.
    Eric
    ADK

  • HT4859 More than doubling the required space for iCloud

    Hi
    I have only about 500 photos and a couple of videos on my camera roll I have roughly 200 contacts all my apps not saving I am only saving camera roll and contacts iCloud was only using 3gb of storage 3 hours later it needed 7.8gb any one know why
    Cheers
    Paul

    Not if you are using a different Apple ID. You would need to purchase the app using your Apple ID.

Maybe you are looking for