AE isn't working with new Actiontec c1000a

I've seen a few other posts regarding this issue of connecting an AE to a Actiontec c1000a from CenturyLink, and I've been having similar issues. Hoping someone can assist in getting this figured out.
I have an existing ZyXEL Q1000Z from CL, but it's been hit or miss in the last few months, so CL's solution was to send me a new Actiontec modem. With the ZyXEL, I'm using an AE to generate my wireless network and I'd like to maintain the same set up with the Actiontec. When I set up the Actiontec in Bridge mode and run an ethernet cable from the modem to the AE, AE Utility doesn't recognize the router. The light on the router continues to flash yellow. CL has been absolutely NO help at all, only suggesting that I call Apple, insisting the problem is theirs. It very well could be, but before going that route, I figured I'd see if I could get some help here first? When I return to the set up I have with the ZyXEL, everything, including the AE, works just fine.
Does the AE need to be reset to factory settings before trying to set it up with the new Actiontec? I'm afraid if I do that, I can't just plug my old modem (ZyXEL) back in and get my connection back in case something doesn't work right. Is there another way to use my AE with my Actiontec, without putting it in bridge mode?
Thanks for the help!

This may help
https://discussions.apple.com/thread/3379399
Andrew

Similar Messages

ITunes match isn't working with new Macbook Pro

Hello everyone,
I have had iTunes Match for years with no problems on any device mobile or otherwise. I just purchased a new Macbook Pro w/Retina. I unboxed, powered up, and updated all software. I set up the Macbook with my one and only apple ID and logged into iTunes with the same ID. All of my purchased music is available, however when I go to turn on iTunes match I get this error: "THIS COMPUTER IS ALREADY ASSOCIATED WITH AN APPLE ID. You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.". After this I have no other option but to close the window. I have tried logging in and out and restarting the computer but have had no success. Any help would be appreciated.
Thanks

Hi
i ii suugest you contact Apple support Contact Apple for support and service - Apple Support
JIm

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

You don't need a serial number for the latest version of Photoshop, just sign in with your Adobe ID

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Logitech Pro 4000 not working with new Imac 24"

Just migrated from a G4 to the new Imac 24"
Cannot get the Logitech Pro 4000 to work with new mac.
Contacted Logitech and they said
"please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
However,the cam DID work ,even under 10.4.8 with the old G4...
Any ideas people..
Thanks!

Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
<http://www.ioxperts.com/products/webcamx.html>

SessionManager doesn't work with new xerceimpl.jar?

Hi,
Does anybody know the solution to the problem below?
The toplink sessionmanager, which loads sessions.xml for database session pooling, doesn't work with new xerce parser(xerceimpl.jar). It is tieing to old xerces.jar parser, which has been upgraded to have more functions.
Thank you in advance.
Praveen

Hi Raanan,
It works with old xerces.jar. But in-order to get new functions from new xerces jars from apache, I got xml-apis.jar, xercesImp.jar. They got modified from old ones. So this is breaking toplink sessions.xml load to work.
Did you face this problem?
Thanks
Praveen

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

FaceTime camera isn't working with yosemite 10.10

Today i update My MacBook Pro 13'' (2013) ! FaceTime camera isn't working with yosemite 10.10 !
Anyone Can help me?PLEASE!!!!!!
When i log in , it get me a message ,FaceTime Want use my Key , and than SHOW me Want use my Key( ***** ) Yes or No ?
no matter i Choice any answer , THE FaceTime WII all log on.......,and Show me other message , Please Call Apple , And give me a service code : ******.
<edited by host>

Just got this problem fixed.
This is what customer support instructed me to do for my iMac:
Rest 1.
Shut down computer and unplug power; wait 15 secs.
Turn on computer.
Shut down computer.
Reset 2.
Turn on computer.
Before gray screen comes up, so almost immediately, press Option-Command-P-R at the same time.
Hold down until you hear the turn-on noise, let go and let the system start up.
This fixed my camera problem.

Elements 13 won't work with new camera, it won't update to raw 8.7.1

Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

I upgraded my iphone to ios 6 but now it isn't working with itunes

I upgraded my iphone to ios 6 but now it isn't working with itunes and my itunes will not upgrade. It is stuck at 10.6.1 and my macbook is not compatible with 10.7

A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

AE isn't working with new Actiontec c1000a

Similar Messages

Maybe you are looking for