AE not visible in Airport list/No wireless connection

Hi
I've been using an AE for the last few months to create a wireless network with a Pirelli Tiscali modem. It worked fine until about 2 weeks ago when it dropped out and became unusable. I've done many factory resets as well as others. Occasionally Airport picks it up and lets me configure the AE but then it disappears immediately. Basically it's just not visible in the Airport list. I've updated the firmware on the AE and have got iTunes 8. Any ideas? I want my wireless back!!

Hi everyone
i ran a disk permissions check and repair and got the following readout -
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
I guess it's bugged itself out but i have no idea how to 'fix' the problem.

Similar Messages

  • ESS job created not visible in the list of 'Scheduled Process'

    As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
    I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
    All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
    Thanks,
    Ajin

    I'm facing the same issue.
    Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
    Any help will be appreciated.
    Thanks,
    Sangita.

  • I use Time Capsule and Airport for my wireless connection and my speeds stink!

    I am getting horrible speeds (250K downloads) any suggestions. I have the time capsule and the Airport for my wireless connection and I have a new MacBook Pro. My download speeds are about 250K. I have turned off my wireless and plugged into my network with a physical connection and I get great speeds so something is wrong wiht my wireless connection /setup......any suggestions?

    Yep much better.
    I recommend the following ..
    Set wireless and TC names to SMB standard.. short, no spaces.. pure alphanumeric.
    Lock the wireless channels and set a different name for 5ghz and also lock its channel.
    Use only WPA2 Personal security with a decent passkey.. generally 8-12 characters is plenty. Still follow the rules.. pure alphanumeric mix of upper lower case and numerals..
    If that does not improve things.. how old is the TC.. the wireless output does seem to slide as they age.
    A simple WAP connected to the TC can provide far superior wireless for very little money.

  • Could not send email while in MX, wireless connection

    Last week I could not send email while in MX, wireless connection, using an SMTP server I usually use, and had used from Europe months before - only difference was that I did not turn on AT&T's international access feature. I wish now that I had thought to turn off localization. Email went out when I returned to the USA with no other change. Is this a known "feature"?

    Bring the Mail browser window forward, then select Enter Time Machine from the Time Machine menu, which is represented by a clock icon in the menu bar. If you don't have that menu, select
     ▹ System Preferences ▹ Time Machine ▹ Show Time Machine in menu bar
    Scroll back in the time-travel view to the most recent snapshot containing the messages you want to restore. Select the messages, then click Restore. The messages will be restored to a new mailbox. From there you can move them wherever you like.

  • Canon Pixma IP8500 not visible in printer list

    When trying to install my Canon Pixma IP8500 printer (wireless connected) for the first time on my new iMac I found this particular printer was missing from the printer list, although in the OS X documentation it was stated that this printer would be supported. Although somewhat surprised I downloaded the latest driver from Canon. Surprise, surprise, after installing this driver (an action which was 'succesfully completed') it still was not visible in the printer list !?
    Has anyone had a similar experience and/or does anyone know how to tackle this problem ?
    themoose

    Hi Greg,
    Thanks for your fast response!
    I downloaded a trial from the PrintFab site and installed the driver, unfortunately with the following results:
    Installing Prinfab
    Language=en
    Installing program files... mkdir: /Library/Printers/PPD Plugins: No such file or directory
    cp: /Library/Printers/PPD Plugins/PrintFabPDE2.plugin: No such file or directory
    cp: gui/PrintFabPDE.plugin/Contents: unable to copy extended attributes to /Library/Printers/PPD Plugins/PrintFabPDE2.plugin: No such file or directory
    cp: /Library/Printers/PPD Plugins/PrintFabPDE2.plugin/MacOS: No such file or directory
    cp: gui/PrintFabPDE.plugin/Contents/MacOS: unable to copy extended attributes to /Library/Printers/PPD Plugins/PrintFabPDE2.plugin/MacOS: No such file or directory
    cp: /Library/Printers/PPD Plugins/PrintFabPDE2.plugin/MacOS/PrintFabPDE: No such file or directory
    cp: /Library/Printers/PPD Plugins/PrintFabPDE2.plugin/Resources: No such file or directory
    cp: gui/PrintFabPDE.plugin/Contents/Resources: unable to copy extended attributes to /Library/Printers/PPD Plugins/PrintFabPDE2.plugin/Resources: No such file or directory
    cp: ...
    I have no clue as to what is going on here, perhaps I should leave the PrintFab guys a note....

  • Workflow is not visible for a list in an app in SharePoint 2013

    Hello All,
    I have created an app in SharePoint 2013 and added a basic workflow in this app.
    Though the solution gets deployed successfully, workflow is not visible in list --> Workflow Settings.
    Has anyone faced this kind of issue in SP 2013 App ? Please provide your inputs to resolve this issue.
    Thanks.

    Hi Supratim,
    I would suggest you that you try to analyze the workflow log and see where the workitem goes exactly.
    See if the workflow goes into error or if the workflow gets routed to the wrong agent.
    Also let us know how the agent determination is being done?
    Is it been done using rule or is it static agent assignment?
    Regards,
    Raj

  • Airport Utility Disables Wireless Connection - No Connectivity Error

    In setting up an AX to stream iTunes to my stereo over my existing wireless network (Netgear access point), it appears that the Airport Utility has somehow disabled wireless access for my laptop, as I now get a "limited or no connectivity" error message and cannot connect to the internet.
    Airport Utility detected the AX, I set a password for it, directed it to join my wireless network, selected WPA2 encryption and entered the 26-character key to the network. AU then said the AX couldn't join the network, and wireless connectivity for the whole PC disappeared and I haven't been able to get it back.
    It appears that Airport Utility somehow altered some of the network settings on my PC but I can't figure out what. I spent hours trying to figure this out last night and am at a loss. Help!

    Welcome to the discussion area, mrdowntown!
    When you are setting up the AirPort Express, you are using a default network provided by the Express with a name like +Apple Network xxxxxx+. You need to be on this network to be able to configure the device. Your computer was on this network.
    Chances are, your PC may still be trying to access that network, and not the network that you normally use. See if that might be the case.
    WPA2 Security would be used on the AirPort Express if that is exactly the setting the Netgear router is using. If the Netgear is using WPA type encryption, try the WPA/WPA Personal setting on the AirPort Express.
    Unless the security settings match up exactly, the Express will not be able to join the Netgear wireless network correctly. See if you can find the settings page for the Netgear to see exactly what type of security it is using.
    You'll need to "hard reset" the Express by holding in the reset button until you see the amber light begin to flash more quickly. Then try to reconfigure the Express. Unfortunately, if you don't have the right settings entered on the Express, you'll have to start all over again.

  • I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

    I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Airport Extreme working but not visible in Airport Admin Utility

    Recently my Airport Extreme (spaceship version) stopped showing up in the Airport Admin Utility v4.2.
    The internet works fine computers can connect wirelessly or wired to the Airport Extreme and use the internet. AppleTV isn't visible in iTunes anymore either so it can't sync but can connect to the internet to see previews, YouTube, etc.
    I have tried removing Airport Admin Utility and reinstalling, checked permissions, all okay.
    Any ideas?

    Ah - more clues always help!
    In that case, I tend to agree with your assessment. For some reason, the Bonjour automatic network device discovery process seems not to be working properly on this Mac. I'm not going to be of much help in troubleshooting that problem.
    The only other issue I have encountered is with the installation of excessively robust firewall software on the Mac blocking Bonjour's ability to discover network devices. VPN client software is sometimes also a culprit, for the same reasons. You have already indicated this could not possibly be the cause of your problems.

  • Home network not displayed in AirPort list

    My home wireless network suddenly won't show up on my 1st-gen MacBook. It is showing up on other computers, and other networks are showing up on my MacBook - it's only the combination of the two that isn't working.
    I have tried basically svery solution I can find on these and other forums, including restarting the Macbook, turning AirPort off and on, rebooting the router, and reinstalling AirPort Update 2007-002. Nothing has worked. I can't run network diagnostics because I can't select the network in the list - it's like the network doesn't exist to the MacBook.
    The router is a SMC Barricade-G. I've never had a problem like this before.
    MacBook Core Duo   Mac OS X (10.4.9)  

    Resetting and renaming the router didn't help. I have a feeling that I may just have to get a new one. Any other suggestions would still be appreciated, though.
    Also, I can connect to the router through Ethernet.

  • Airport Express B/G not visible on Airport Utility / Airtunes not working

    Hi Everybody,
    I'm just experiencing a Airport Express/Airtunes Problem! Everything was working fine. I setted up this 1/2 year old Airport Express B/G as the only device via ethernet cable next to my FritzBox DSL Modem to have a wireless network. I use it for Airtunes / Printer Sharing & Wireless Networking. 1 Week ago I visited my friend, who has a new Airport Express N and we tried to extend his my network thru My AX. As I got back home, I wasn't able to find my airport via airport utility, so i hard reseted it and reconfigured it as I told above. Everything was working fine for about one hour until the music stopped and until then this device could not be found via Airport Utility and iTunes doesn't offer me an option to play music via Airtunes anymore.
    But the crazy thing is: I have Internet, Printer Sharing is possible & my roommate can play music via Airtunes using his Windows XP PC and even see the device via the utility.
    I tried some settings with the networking security, but there appears no difference neither in iTunes than in the Utility.
    Help much appreciated!
    Cheers

    This morning a firewall security message showed up: Allow connections of myDNSresponder and Config...? I allowed all connections, it worked for maybe one hour and disappeared again. So I decided to set my firewall settings to "allow all incoming connections" which was set to "set access for specific services and applications.
    Now everything works really fine with the airport express!
    Have A Nice Day

  • My xbox 360 will not see my AirPort Extreme basestation wirelessly.

    I just bought a new AirPort Extreme from my local Apple store last night.  All devices work great (iPad, iPhone, MacBook Air, Win7 Laptop) all exept my Xbox 360.  My Xbox will not even see the AirPort base station via the older white Xbox wireless adapter.  I am at a loss here because I thought the SSID was broadcasting since my other devices found it no problem.  Anyone else have or solved this issue?

    Microsoft offered two versions of the "white" USB Wi-Fi adapter for the original XBox 360; one for 802.11b/g and the other included 802.11n. Both only support the 2.4 GHz radio band. Which do you have?
    By default, your new 802.11n AirPort Extreme Base Station (AEBSn) provides support on both the 2.4 & 5 GHz radio bands and for all of the current radio modes (802.11) ... so, by theory, the XBox should be able to find and connect to its wireless network. However, I have noted that original XBox did have some issues connecting with these default settings.
    You can change the default radio mode setting to a number of other choices. Note that you will need to hold down the Option key (for the Mac) before making a redio mode selection from the AirPort Utility to "see" the additional options. I would suggest the following to see if the XBox can connect: 802.11n only (5 GHz) - 802.11b/g.
    If that radio mode still doesn't solve the connection problem, try temporarily disabling wireless security on the AEBSn. Please post back your results.

  • Time Machine not visible in Airport utility

    Hi,
    When I try to set up my Time Machine on opening Airport utility, the message is 'Discovering Apple Wireless devices' and then I get the following message
    Airport Utility was unable to find any Apple wireless devices. Make sure the Apple wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again.
    This happened suddenly. Initially the TM was not working, there was no green light. Now the green light on the TM is glowing continuously but my emac and my Macbook is not able to recognise the TM.
    Can any one suggest some possible solutions?

    hi
    i think you mean AU can't find your +time capsule+. *time machine* is the name for apple's backup solution.
    have you been able to successfully backup your machine(s) to your TC prior to installing 10.6 ?
    hold on - your profile in the initial post says you're on 10.6.1 but in your subsequent post it is 10.4 ? which is it, then ?
    Message was edited by: Jolly Giant

  • Time Capsule switches on, but not visible in AirPort Utility

    I have just moved house.
    New ADSL modem/router, no problem setting up network. Trying to 'extend' network with Time Capsule (and wireless backing up) as I had in the previous house without a problem. When I use AirPort Utility to scan for wireless devices (eg AirPorts), with the TC switched on, it doesnt appear in AirPort Utility.
    The light is flashing amber, but it alweays did that.

    Philippe Platon1 wrote:
    My Time Capsule is visible in the finder windows as a drive, I am connected to it, and it is my link to Internet, it is visible from my wife's iMac in the next room, but it won't appear in the Airport utility (I can see only the two Air Port Extreme that are in other parts of the house for remote speakers).
    If you can temporarily connect your computer to the Time Capsule with an Ethernet cable, you should be able to see it in AirPort Utility.
    In fact I want to access my TC configuration in order to get back the password needed for my wife to connect to it.
    Until you can resolve the AirPort Utility issue, you may be able to recover that password with the Keychain Access utility.

  • BEx: How to change a Query Variable that is not visible in Filters List?

    Hello Experts,
    Good day, I'm currently editing an old query, I am changing the Query Variables with new ones, but I found one variable that I cannot replace.
    Please see the screenshot below, in the Query Properties Window [Variable Sequence Tab (right side of picture)] the Variable that I am trying to replace (Unit) is visible. But when I look for the variable in the "Filter Tab" (left side of picture) under Characteristic Restrictions, it doesn't exist in the list.
    How can I find this Variable and replace it with a new one?
    Other reports are still using this variable so it will impact the other reports if I simply edit the variable. So I need to replace it with a new variable instead.
    Thank you for your time.

    Hi,
            SInce you are searching for a variable for Unit, look into below screenshot and navigate to the variables.
    First click on drop down and select 'Entry for variable' then you will get lisl (after you click on drop down in 'Target Unit' drop down option.
    Normally these type of variable called 'Formula Variable' try editing any of the formula and locate the option as shown below,
    Hope it helps! don't forget to update the final solution and mark the correct/helpful answers.
    Remember it will help others to find the solution and motivate the members to answer your question.
    Thanks,
    Umashankar

Maybe you are looking for