AE Request Deletion
Hi Experts,
I have a question..
How to delete the requests from Access Eenforcer...i am trying to delete some test work flows.
Please advice
Hi,
for Audit reasons Access Enforcer by default does not allow Requests or Paths (as soon as any Requests are tied to this) to be deleted.
There would be only one way: deleting the Requests on Database level - emptying the tables that contain the Request data.
This is not recommended on production servers and not supported by SAP (so no liability for any data loss).
Regards,
Daniela
Similar Messages
-
Data request deletion problem from remote system.
Hi experts.
Now i am facing one critical problem . The description is as following:
we design the edw level in one phsical BW machine(A) which contains only dso infoprovider. This machine(A) works as datasource to provide data to another physical BW machine(B).
The dso in A system is exported as datasource , Cubes in B system load data through this datasource .
We first do the initialization with data contained on B system and then load delta data from A system. But if we want to delete some request in system A ,the system indicate this request can not be deleted unless the initialization in system B is deleted( this will lead to all the data missing in system B).
Can anyone explain this mechanism to me , please help me suggesting some kind of methods to delete the request in system A without deleting the initialization information in system B.
Thanks in advance.
Waiting online for your kindly reply.1. Ask your Basis to look into it.
2. try analyse your Baqckground Process in SM51.
3. Is your Deletion Job started immediately or any Delay?
4. If That cube or ODS has only this request which you are deleting, go with Context Menu Cube or ODS (by right click) --> Delete Contents.
Delete Contents will improve performence compare to Request Deletion..
If you have request more than this, you should not go for this.
Nagesh Ganisetti.
Assign points if it helps. -
InfoPackage with overlapping requests deletion
Hi,
what is an InfoPackage with overlapping requests deletion? Where is it used?
Regardshi,
check out the below link it answers your query in detail.
Re: Delete overlapping request
hope it helps.
regards,
AL -
Hey all,
how are you!
I have a little glitch in my Processchain and since I can not seem to find an answer myself I was wondering if any of you might give me some feedback
In a processchain I created, I wanted to delete the PSA-table contents and I added this process called "Deletion of requests from PSA".
But whenever I check my daily run, I have to get back (due to its "red" nature) and do manually 'rightclick>repeat' and then all seems well.
The 'red' condition upon monitoring gives me the message "no sub-request for this request"...
well...anyone?Hey Olivier,
It is a transactional load from an R/3 ODS.
In the processchain first we load an ODS and then we start with a request-deletion on the PSA.
Options:
- older then...zero days
the others are not used.
Nothing fancy
Just following
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
Edited by: richard boom on Jan 17, 2008 2:29 PM -
I lost my Ipad 5 and requested delete all from find my phone, they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?
The iPad should be asking you for the Apple ID and Password when you turn it on.
-
Hi all,
still we are facing spool over flow issue, even though we installed kernel level-236/64bit.
We had scheduled a batch job to convert spool request deletion date with the report-RSPO2010, and it is running fine.(it run daily before spool reorg job run). SPOOL_REORG job also finishing with out errors but still spool numbers volume is very high.
SAP_BASIS level is 18.
Any idea to over come this issue. Please guide me.Hi Nani,
Please refer to the following post:
Re: Database error: TemSe->XRTAB(3)->1 for table TST01 key
This over flow may occur due to lot of spool requests being generated as a result of certain background jobs or manual requests from users while generating some reports. During busy time of business this happens.
To know which job is responsible to genereate more number of spool request please do following:
T-Code: SM37
Job name: "*"
User name: "*"
Select "FINISHED" check box.
Job Start Condition:
From date: Past 10 days to cureent day (date) and click execute button.
In the resulting window within "Ln" column you will see a mat like symbol representing the job generated spools. Select that particualr job and right click and select "Spool List" which will display number of spools generated by the job. You can contact the owner of the job and communicate with him if the number is too big.
Please let the community know if more information is required.
Regards,
Nani Chowdary. -
Requested deleted in Transport Organizer
Hi,
How can we find out request deleted in Transport Organizer (SE10). Is there any table or log which possess the request and the person who deleted the request.
Thanks.Dear Rakesh,
We just can find only modified ,released ,released from starting requests in Transport organiser,
I suppose we cant find the deleted requests and person responsible in BW side.
The Basis people may help u in this issue as they maintain dumps of what has been loaded and deleted on a timely basis..Please do contact basis People.
Assign points if needful.
Best Regards,
VVenkat. -
BADI/BAPI/... for request deletion required
Hello,
Does anyone know if there is any BADI, BAPI or recommendable standard programme that I could use to have a request deleted (result should be the same like deleting the request in RSA1) based on the request number ?
Thanks for any advice.
Klemens G.Hello Kishore,
Thanks for the 2 tips.
The BAPI you are mentioning will still keep the request entry visible in the administration tab of the infocube. Can I get it out of there as well like highlighting the request and clicking the "Delete"-button (which will remove the request and delete its associated data from the cube)?
Kind regards,
Klemens G. -
Cube Request Deletion - Other loads possible or LOCK problems
Hi Folks,
can somebody tell me if there could be a lock situation if I have in one process chain the cube request deletion step running (cleaning out some request) and at the same time another load is running into the cube? We would not drop/re-create the index in load situation so no lock by the index operation.
Any experience?
From what I have seen there shouldn'T be a problem as the request deletion will be "scheduled" and simply execute if lock is release (if there is any) and the deletion it self places only a quick lock to determine the request ID but doesn't much impact other loads.
Is this all correct? Or any other views?
Thanks,
AxelHi,
While Loading
It is not possible to:
· Delete data
· Archive data
· Delete indexes and reconstruct them
· Reconstruct statistics
For more information:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/bb/bdd69f856a67418962d74bfd7bd8af/frameset.htm
Regards,
Anil Kumar Sharma .P -
Can any one explain how the Requests deletion in an ODS & Cube works?
Can any one explain how the Requests deletion in an ODS & Cube works & differs?
It works in the normal way as you delete a request but following are the differences between them
1) If you try to delete a request from the ODS, all the requests which are loaded after this request also get deleted, and in the cube its not.
2) You cannot delete a request from the ODS once its change log has been deleted, similary you cannot delete a request from the cube that has been compressed.
3) you can delete overlapping requests from a Cube. but in ODS its not possible.
Regards,
Bharat -
Hi All,
The request is supposed to be deleted by the system automatically as and when there is a new request is loaded. But the job is cancelled and the requset was not deleted.
The Job Log contains the following information.If any one has seen this error please do let me know whats the solution for this.
Job log
Job started
Lock NOT set for: Deleting transaction data one request at a time
Job cancelled after system exception ERROR_MESSAGE
If you have any ideas how to resolve this do let me know.
Regards
vijay thammineniI think are you loading and deleting parallel activities to the same cube or ODS? ..
So for deletions, it tried to lock the object.. but since it was already locked by other process it failed..
Also check in SM12 to see any locks ( remained ) on the cube?
regards,
Hari -
Transport request deleted - how can I delete the link in CharM ticket?
Hi everyone,
yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
How can I get rid of the broken link in the CharM ticket?
Thanks in advance,
Benhi
Please check if you can decouple transport request using charm
also if you can let us know what kind of error in charm ticket will be helpful
Saravana -
Bad request deletion at a time from multiple cubes?
How do we delete a bad request or reconstruct from cube at a time which is loading from single info source to multiple cubes?
hi Bharath,
try these links.
http://help.sap.com/saphelp_nw04s/helpdata/en/ca/5c7b3cbd556915e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/maintenance%2brequest
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65a8e07211d2acb80000e829fbfe/frameset.htm
hope it helps. -
Hi All,
I have a problem for which i am not able to get the proper solution from the threads.
Can anyone help me to solve this.
I am getting this error "" RSDU_TABLE_DROP_PARTITION_MSS Error while creating the clone table /BIC/B0000183000"
while deleting request from the psa.
This error i am getting because i have deleted the data from the psa table from the tcode se14, but the requests are still there in the request. There is no data in the psa but the request exists.
Now i want to delete the empty request, because i am scheduling the process chain to delete all request older than 3 days. But because of this empty request, i am getting the error while scheduling the process chain.
I also tried to delete the psa data from rsa1old but to no sucess.
Can anyone help me to solve this issue.Hi ,
For your issue you can try these steps : -
1 - Run the report - SAP_DROP_TMPTABLES.
2 - Run the report - RSAR_PSA_CLEANUP_DIRECTORY_MS.
You can Check details for the report execution from the note : 1063105 - Program "RSAR_PSA_CLEANUP_DIRECTORY /_MS"
3. You can also check the note - 1299865 - DB Shadow tables with '@k' name (e.g /BIC/B0000201@k0).
Regards,
Lokesh -
Request Deletion from Write-optimized DSO
Hello,
With the new Write-optimized technology, it is possible to delete manually "older" requests from the W-O DSO.
Could anyone of you think of an automated process to delete "old" requests from a W-O DSO (not the entire content , the most recent should still be available.
For instance : delete everyday the request older than 7 days.
Already checked solutions :
- Selective deletion at the administration level of the DSO -> cannot be repeatedly scheduled
- Copying the Selective Deletion generated program to make one's own program and schedule it (system cannot "remember" the generated program)
- Diverse SAP Function Module -> do not work for this scenario (like RSSM_DELETE_REQUEST, only for cubes, RSSM_PROCESS_REQUDEL_ODSO or RSSM_DELETE_REQUEST, where you need to specify the Request number
- We do not want to include a delete job in a routine at the Transformation level.
- We do not want to complicate the Data Model by creating a new intermediate DSO allowing to flush the DSO at each load..
Any other ideas??
We are on Version 7.0, SP 13.
Many thanks!
amandaHi ,
We have worked on similar business requirement .We wrote a report program in SE38 and running it via a process chain .
If you want i can help you to write code for same .
It will be a two step process :
1.deleting request from RSICCONT so that it get deleted from manage tab.
2.deleting data from active table of that WDSO .
Code for Program :
data :v_time type c length 17,
v_date like sy-datum .
( N) = 7 put no of days here before which you want to delete records
v_date = sy-datum.
subtract 7 from v_date.
concatenate v_date sy-uzeit into v_time.
delete from rsiccont where icube = wdso_name and timestamp LT v_time .
delete from wdso_active_table_name where rstt_tsmp LT v_time.
It will do your work .
Regards ,
Jaya -
Need to make Leave request delete a single step process on Leave Overview..
<h5> Hi Guru's, </h5>
<p>
My clients requirement is to add a coulumn to the standard LeaveOverview application under SAP ESS Leave application.This coulumn should have a "Delete" button for each row while showing the LeaveOverview records.
<p>
On Click of the Delete button the client wants the Leave request to be deleted,without carrying out any further steps as they appear in the standard scenario.
<p>
I could add the coulumn by using the provided hidden cutomer field, and added the button as well. Only thing remaining is now the deletion part of it. I am new to WebDynpro java so please help me.
<p>
Thanks in advance!
<p>
Samir Kulkarni
9922111479Hi Siddharth,
Thanx for a quick reply!
I know it can be done with wd java, but I would like a step by step process as being a amature in this domain. I tried few things on standard but in the end it will take me to the review screen only.
It will really be helpful if you let me know the note number cause I have been searching for the same for long and could only get a note for skipping review screen in the Leave Request process not in the deletion's case from leave overview screen.
Thanks in advance!
Regards,
Samir
9922111479
Maybe you are looking for
-
Move full SSD / Drive from busted Macbook Pro 2010 to older model
Hi, I have a 13" Macbook Pro 2010 model whose logic board has failed. I want to take the SSD (installed with Snow Leopard and full of files and folder structures I want to keep) out of this busted computer and move it over to a Late 2007 Macbook Pro
-
Friends, Getting below error when i restart the server. <Dec 31, 2014 5:33:58 AM EST> <Warning> <Management> <BEA-141274> <Production mode has specified at the command line via the weblogic.ProductionModeEnabled system property. This system property
-
Data source and origin of ELM&status profile means
Hi SAP gurus Data source and origin of ELM&status profile means ..
-
User decision on partial stock
Hi Gurus, I've seen some postings in regard to partial GR and early inspection in PP but not specific to this issue. The user process goods receipt for a PO from external vendor for QM stock, let's say for 20 quantities. The QM user wants to make the
-
WDRuntimeException: Instance of view controller SystemView does not exist
Hi there, I'm working with SAP NetWeaver v7.0, NWDS 7.0.19 and IE v8 on Windows Platform. And have started with my first steps in front of Web Dynpro. The scenario is: I have three Web Dynpro views with tables (not embedded). All tables are setted wi