AE seems to work, no config errors but it does not work
I have configured an AE to work as a network extender (implemented with an AEX that is properly working). The Airport Utility configures it correctly and I have the AE with the green LED lighting.
When I connect my Macbook to ethernet through the AE and I make a ping to an external server in terminal, for some servers I get an answer (so I am connected to ethernet) and for others I do not (why?). The rest of the internet programs are not working (Safary is not working even with the servers I got response with the ping).
Could anybody give me a hint?
Thanks a lot!!!
Jose
So you configured the AEX to create a wireless network and the AE to extend that network:
Open AirPort Utility and select the base station or the Time Capsule that will connect to the Internet.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the device that will extend this network, and then click Manual Setup. Enter the password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the network and device password if necessary.
Is the AEX acting as router - serving DHCP and providing NAT? Is the AE picking up an appropriate IP address from the AEX?
How are the macs configured in the Network preferences pane of System Preferences? Since you're connecting via ethernet, choose "built-in ethernet" from the "show" drop-down and look at the settings under TCP/IP.
I'm not sure what would cause such an odd pattern. Are you running any firewall software? (Except the built-in firewall configured through the standard Sharing preference pane which should be OK unless, maybe, you've used some of the advanced options which are not default.)
- cfr
Similar Messages
-
i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out. What step have I missed to clear out my icloud storage? Thank you.
How long was it in storage & what battery percentage was it originally stored with? You can kill Lithium batteries if they are not stored properly is why I ask.
-
Flash 8 encoder, No errors, but video does not play.
Hi I really hope I can get some advice on this situation I
have already wasted hours of time by encoding this project twice.
This is a 2 hour long wmv file. I am encoding it and can see the
video the entire time it encodes. Afterwards though if I load it
into VLC player or into flash and export, It doesnt play. I have
done another 2 hour file right before this one and it worked
perfectly. I tried re encoding the file and had the same outcome.
Can anyone offer any advice?Not only is this problem (blank video on ALL encoded FLVs and
many downloaded FLVs) still unresolved, but the online tech support
makes it impossible to submit a support claim.
The CS3 Premium support link takes you to a page that only
has CS1 and CS2 listed.
Since those versions of CS didn't include Flash, you can't
pick Flash as the sub-product. So there's no correct way to submit
a query to tech support.
I keep trying, hoping someone will direct me to a useful
resource, but for the last 7 weeks I've gotten nowhere. I was
really hoping someone on this forum would have some suggestions,
but all the replies have been from other people with the same or
similar problem.
Unfortunately, this problem makes Flash Professional
completely useless for me, so I'm getting really desperate. -
What can I do to solve an issue with my iPod touch gen. 5 32 gb on connecting to iTunes on my computer? iTunes says there is an error with my iPod touch, which this was a result of deleting my songs and videos. I was only transferring more songs, videos and editing my playlists. I don't have that much of the songs left. What is the best solution?
And what is the wording of the error message?
-
I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie. -
I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.
bump? Is bumping allowed? Lol.
I just really need some help here. -
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?
As Roger said, iCloud does not support external POP accounts.
However, you can configure your Max to directly receive your Yahoo! email by following these instructions:
http://hints.macworld.com/article.php?story=20110208153256491
Note that this works (for me) without a Yahoo Plus! account - and make sure that you scroll down to the comment at the end of the article which has all of the correct settings in one place.
Cheers,
Rodney -
I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks
I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found? -
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.
Hi,
I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though. Toggling the wifi setting clears
the issue temporarily but it occurs again. Running iOS 8.3 now. This was the case on iOS 8.1 and 8.2 as well.
I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
My router is an EA9200 router with 2.4 Ghz and 5 Ghz. It is configured with all bands with the same name.
All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
My thought is that iphone 6 cannot handle well the moving around between bands.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
DavidHave you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on? This seems to solve a lot of problems.
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595> -
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys
Maybe you are looking for
-
Is there anyway to highlight text of emails I receive? I would like to be able to highlight the important sections in some the very wordy emails I get, so I go back to read them, I don't have to reread the whole thing! Thanks for your help! Message w
-
Is there a way to create new 'To Do List' items?
My team is making a Help File for our software and it would be very helpful if the To Do List within RoboHelp 6 would allow us to customize it in such a way as to make it more suited for our needs. Thanks.
-
I'm getting totally hopeless setting up my router :(
My dad and I are trying to get a A/V for about a month now without any success at all. I have already previously sent a post on this forum and Ed have helped me a very, very long way. Thanks to him so much!! The good thing is we could have a A/V toge
-
Using Bridge CS4, I like to create files within which I store images that I duplicate from the originals. After doing this quite successfully, I can no longer duplicate images. I get an error message " an error has occured while duplicating images d
-
Dear BI Experts, I have created a custom variable (single entry, optional) that looks similar to 0S_FPER. I am trying to use it with an offset -1 in 2 columns with Restricted key Figures (RKF's) and trying to save the query, I am getting "Terminate: