AE Setup for printer and Airtunes ONLY?

If I set up a wireless network on my AE for printing and Airtunes, but my laptop accesses the internet via ethernet, does the AE allow access to that connection backwards through the laptop? (I don't want it to).

dasharst, Welcome to the discussion area!
Yes that is possible.
If your Linksys is a wireless router, simply configure the AirPort Express (AX) to join the wireless network created by the Linksys.
If your Linksys isn't wireless, simply connect the AX via Ethernet to one of the Linksys LAN ports. Configure the AX to act as a bridge (not sharing a single IP address).

Similar Messages

Use TC for Wireless Printing and Backups Only on Existing Wireless Network

I am fairly clueless about this whole issue. I set up my current Belkin wireless router several years ago, and haven't had to fool with it once. I don't want to have to touch it--if it ain't broke............ However, I would like to use my Time Capsule I just purchased to backup via Time Machine wirelessly and attach a USB printer and print wirelessly. So the TC will not be used for internet, just want a separate wireless point for printing and backing up. Is this possible? I am not sure which choice to choose in Airport utility. I tried a couple different ways, and it didn't work. Can't honestly tell you what I tried, am a bit confused at this point!

If you have not already done so, I suggest that your start over on the AirPort Expess "from scratch" by performing a Factory Default Reset and then attempt to configure it to join the network again.
Resetting an AirPort Base Station or Time Capsule FAQ
If you have an older Express, make sure that you are not trying to configure it to connect to the 5 GHz network, as it is unable to do so.
Assuming that the name of the wireless network, wireless security setting and password on the Express match up with the AirPort Extreme, the Express should "join" the network if it is working correctly.
If you are still having problems, all that you really can do is try the default reset a few more times. If still no luck, the Express....which is at least 5-6 years old or older, may likely need to be replaced with a new model.

Keyboard shortcut for printing _current page_ only in Reader 8?

Hi there,
I'm working through a large PDF-file, and need to print individual pages while reading through the whole of this PDF file. I don't think that there is a keyboard shortcut for printing _current page_ only.
I'm aware that CTRL-P gets you to the print menu, but then I always have to opt for clicking on "current page" AND "ok"... With about 50 pages out of a 100-page document this is cumbersome.
If there isn't such a keyboard shortcut, could Adobe consider giving its users the option to customised shortcuts, and implement this option of printing a current page only?
Many thanks,
Pli

no it doesn't
it just changes font size

Firewall Rules for Printing and Scanning through Windows Firewall

Hello,
I am having trouble determining the Ports, Programs, and Services required for printing and scanning with my AIO.
I am using Windows Firewall in Windows 7, and am only allowing certain rules in and out.
I know the firewall is the problem, for when I disable it, everything works fine.
Which rules are required for printing and scanning through the firewall?

4th Bump,
Is there anyone who can help me with this?
As I said before, other printer manufacturers such as Lexmark and Brother provide this exact information.
Why doesn't hp have a document for this? Does everyone just disable their firewall or open every port?

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Hi there
You would need to purchase a seat for each user.
What you currently have is 1 seat = 1 user.
Kind regards
Bev

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

I want to create a document in Illustrator that i can use for Print and Web - using 2 different colourspaces.

Is it possible to do this? I need to create a document so that I can export as a high quality CMYK for print and export the same file as RGB jpeg / pdf for web and email use. Do I have to create the document with 2 different colourspaces, or can I change / convert the colourspace after I have created and finished the document? or is there some simple way to select an RGB / CMYK option when saving/exporting?
look forward to your reply!
Tom

Tom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller.

IPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?

iPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?

While we all have MacBooks in this forum not all of us use iPhoto. There's an iPhoto Support Community where everybody uses iPhoto. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/iphoto

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

I am having trouble printing and am only getting part of the document which i have no margins set any help??

i am having trouble printing and am only getting part of the document i have no margins set any help??

What version of Pages?
What Printer?
If it is Pages '09, turn Comments off.
Peter

I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!!

InCopy/Indesign workflow for printed and folio mags?

We have a printed magazine that we also produce as folios for a DPS app. We produce the mag by using InCopy for text within the InDesign workflow. No problems there.
When finished (all edits completed) we produce the folio files but adding in all the links to twitter handles, URL's etc is proving tedious and timeconsuming for the editors and the designer. The editors (who use the print files and InCopy) produce a list in excel of the additions - they reference columns and paragraphs - which we don't use in the folio version. The designer then finds the spot after a lot of searching and then copies and pastes. All very tedious and a backward step in workflow.
Is there a way to include the "links" in an InCopy file that doesn't appear on the print PDF's yet apply correctly in the folios?

Use conditional text.
All interactive elements should be inline objects or simple hyperlinks that are tagged with a condition, then either showing or hidden depending on the article. Hide the interactive content when you create the PDF for print, and show the condition when adding or updating the article.
Anything you want to show/hide has to be part of a story — so text, inline objects, and anchored objects can all be used this way.
InCopy can see and apply conditional text, but cannot edit DPS-centric content such as an anchored MSO.
As always, using matching versions of ID/IC is important.

I have elements 9 for mac, and I only "seem" to get 2 guidelines.

I have elements 9 for mac, and I only "seem" to get 2 guidelines. Is there a way to get more? Or is that all?
Hmmm as I work with it I seem to get more but only if I enter distances correctly. It defaults to the upper left of the image ok, but then How do I measure the outside of the image correctly?
Should I just use the image size as my guide?
That seems to work. Thanks anyway :-)

If you have the Rulers showing, then you can drag out your guides from the rulers.

AE Setup for printer and Airtunes ONLY?

Similar Messages

Maybe you are looking for