AE wired to wi-fi modem/router

I have a wi-fi network using a Netgear modem/router already and I want to add Airport Express to it to stream music to my hi-fi.
Now I know I can add AE as a client to my wi-fi network but am worred about poor signal strength and bandwidth issues.
So can I wire my AE via ethernet into my modem/router for better streaming?
I'm hoping that a wired connection to the router is better than wi-fi to router then wi-fi to AE.
Any ideas?

Dazza,
Perfect. Exactly what I do.
With poor signal strength, and especially if you were
wanting to transmit the music from a wireless device
to the Netgear, and then have the Netgear re-transmit
it to the AE, the transmission rate drops
significantly.
Assuming you have AirPort Extreme at a logical
maximum of 54Mbps, AirPort drops the transmission
rate to reflect the actual amount of good data
received. Goes from 54 to 48 to 22 to 11 to 5.5 to 4
to 2 to 1 Mbps. These are still only logical maximums
and don't account for any device having to
re-transmit any wireless signal it receives. It
doesn't take long for the rate to 2Mbps, then you're
hoping for throughput of 1Mbps. In reality, you'll
get perhaps 600kbps pushing your network to the limit
playing simple mp3s, with no internet browsing.
Ethernet between Netgear and AE can remove the poor
signal strength and double the throughput of the
Netgear, not having to re-transmit any wireless
traffic.
You may also want to set up the AE to be it's own
network, but turning off DHCP. Give it the same name
and password as your Netgear, tell the AE that the
WAN is on Ethernet and you have a roaming network,
extending the range of your existing network.
Dazza,
I have the same issue. Can you help?
Trying to have my AE wired to my AEBS via a switch. The ethernet cable has signal because I can hook my PBG4 to the ethernet cabel and get out to the internet. However, when I plug the same ethernet cable into the AE, I cannot get out to the internet wirelessly thru the AE. But, I do have connection to the AE and can stream music.
Can you tell me what I am doing wrong with my setup?
Thanks
DE
PWBK G4 15" Mac OS X (10.4.6)

Similar Messages

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

Hooking up/configuring a WRT54G2 wireless router to my wired modem/router.

Problem description: I have bought a wireless router (Linksys WRT54G2) in order to connect it to my ADSL2+ modem/router (a TP-Link TD8840) to provide wireless internet access to my iPhone and laptop. I only intend to power on the wireless router when I need it, not have it on all the time wasting electricity.
Attempted fixes: Configuring the WRT54G2 per the install CD, but this appears to mean I must have my wireless router always powered on in order to access the internet even when I'm not using the wireless. Ideally I just want to turn on the wireless router as and when I need it.
Operating system: Windows XP Pro (32-bit) SP3.
So, as my description says, I bought a WRT54G2 so I can browse the web on my iPhone using my DSL connection rather than the cellular (3G) network. I currently have the WRT54G2 plugged in from one of its four ethernet ports to an ethernet port on my wired modem/router. The IP of my modem/router is 192.168.1.1, which also appears to be the default ip for the WRT54G2 So I can't access my WRT54G2's admin screen to properly set up the network.
At this point I feel as if I should reset the WRT54G2 to factory settings and start from scratch, but I lack a coherent set of instructions to point me on my way. It's a bit frustrating because I'm pretty good with computers generally, but networking obviously is not my thing. Can anyone please help

Hi modeski,
To setup your WRT54G2 router and make it work with your modem/router there, chnage first the IP of the WRT54G2 from 192.168.1.1 to 192.168.2.1 before you connect it to the modem/router.
In other words, you are cascading two routers.
Hope this help!

X3500 to be connected via a wired VDSL modem/router

Hey, I just got myself the X3500 ADSL2 modem/router just to use it as a wireless router (got it 2nd hand, good price).In order to use the bandwidth I have, I got myself a separate Huawei wired modem/router just to use it as a VDSL2 modem.The thing is that I'm having a hard time to configure this simple setup.After using the live chat, I have just figured out that the X3500 router capabilities can not handle the VDSL2 bandwidth, is that so?What I did was setting the Huawei modem/router to be the only DHCP, plugged one of the the Huawei LAN ports to the Cable (WAN) port in the X3500 router and set the DHCP service in the X3500 to disabled.I have tried to set the X3500 to a briged mode only, didn't help much.Any idea about this simple but yet so annoying setup? Thanks!

It looks good and the WAN Subnet mask is fine too. From a computer (Mac or PC) connected to the X3500 via Ethernet run the below command prompt\terminal commands and post the results: PC:ipconfig /allping www.yahoo.com -n 40tracert www.yahoo.com Mac:ifconfigping -c 40 www.yahoo.comtraceroute www.yahoo.com

I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

Accessing wireless router thru wired modem/router

I am running XP Home with DSL connection to the internet. I have a ZyXEL Prestige 600 modem/router. Notice that it is a modem/router all in one, not two different items. Someone gave me a used Linksys WRT55AG wireless router that I am trying to setup for use with my daughter's laptop. I have the phone line hooked to the wired modem/router and then the modem/router connected to a hub. From the hub I go to my two desktop computers. I can come off the hub and connect to the wireless router. Then I open my browser (firefox) and type in 192.168.1.1 and can access my ZyXEL modem/router. I have tried 192.168.1.2, 192.168.2.1, and several other combinations for the last two numbers. My default gateway is 192.168.1.1. My IP address is dynamic but is listed as 192.168.1.33. How do I get to the wireless router to re-do the setup?
thanks,
Harold

Hookup one computer to the router all by itself via cable to one of the lan ports in back. Push and hold the reset button in back for 30 seconds, release. Now power cycle the router. Connect to 192.168.1.1 with username blank, passwork admin. Reconfigure the router to the IP you need.

Wired Cable Modem Router Suggestions?

I need a new wired cable modem router for my house (not really interested in going wireless); my Belkin has failed finally. I don't need more than 4 ports necessarily, and it doesn't need to be gigabit. I'd like to spend less than $100 if I can, preferably closer to $50-ish, but reliability and a quality product is key.

While product ratings are certainly subjective for many reasons, I see *a lot* of routers that are either badly rated or are split between bad and good. The couple I've found that are well-rated are either at least $125 or no longer sold. It's shocking to me that there's such a wide variance of router ratings with such a small number of units with consistently good ratings. A factor that I never thought about that I discovered during research is that there are even some routers that don't perform above 6Mbps, leaving those with turbo connections crippled. It seems to be quite the router jungle out there!

Installation Question--Wiring for Internet Modem/Router? Help please

Hi all, I am scheduled to have the FIOS TV, internet, and phone installed at the end of this month. I currently have DirecTV HD. I have searched the boards and haven't found a clean answer...wondering if you experts have any advice. My questions are:
1. I do not have a Cable or Cat5 (have telephone line) line run to my office where my computer and current Verizon DSL are.
     ---When the installer comes, will he run a cable line/Cat5 to the office?
     ---Do you need both cable line and Cat5 for the modem/router?
     ---If so, will he fish down the wall (above attic)?
2. Since I currently have DirecTV, I have a multiswitch that distributes all the cable lines throughout the house. The multiswith, however, is in the crawlspace and a good distance from where the current outdoor telephone box is. I don't even have a cable box at the house. So, my questions for this are:
     ---When the installer comes, will he run a cable line from the ONT to the location in the crawspace where all the cable lines converge?
     ---If so, the installer uses a splitter, right?
THANK YOU all so much for any insight. My big concern is that in the office there is not a cable line run, and I don't want the installer to drill through the wall to come to the inside. If I have to fish the wire down the wall from the attic, I want to do so before the install date.
Thanks again for your time.
Solved!
Go to Solution.

Arun covered most of this quite nicely...
1. I do not have a Cable or Cat5 (have telephone line) line run to my office where my computer and current Verizon DSL are.
     ---When the installer comes, will he run a cable line/Cat5 to the office? Yes
     ---Do you need both cable line and Cat5 for the modem/router? No, one or the other works just fine...However if you decide to have the router fed by cat5, then a coax is necessary also to feed ip addresses to the set top boxes...
     ---If so, will he fish down the wall (above attic)?   Maybe, no guarentee's there. If there is an existing Coax in the room already, he may just use that
2. Since I currently have DirecTV, I have a multiswitch that distributes all the cable lines throughout the house. The multiswith, however, is in the crawlspace and a good distance from where the current outdoor telephone box is. I don't even have a cable box at the house. So, my questions for this are:
     ---When the installer comes, will he run a cable line from the ONT to the location in the crawspace where all the cable lines converge? Correct
     ---If so, the installer uses a splitter, right? Correct again. More than likely he shouldn't have to change out any of the coax cables as satellite usually uses the better grade coax.
. My big concern is that in the office there is not a cable line run, and I don't want the installer to drill through the wall to come to the inside. If I have to fish the wire down the wall from the attic, I want to do so before the install date. I would suggest this. That way your guarenteed to have the wires run in the wall.

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here. Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here. Forgive me if there is “too much information”. I have to make a trip to the US to buy new networking equipment, so I very much want to get this right. Once I return here, I’ll be pretty much stuck with whatever I get in the US.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us. Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t. But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit. I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted. In any case, we are replacing it since it may be about 4 or 5 years old.
7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL. Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.” I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise. (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
Connection Type: PPPoE
Currently, the router is configured to use WPA-PSK security.
Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
(The following information may be unimportant at this time.)
Broadband Link Diagnostics:
DSL Synchronization: UP
G.DMT Signal: UP
PVC Connection: UP
PPPoE Service: UP
PPP Authentication: UP
IP Connection: UP
DNS Communication: UP
9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models. I will have to buy the new equipment in the US this year. At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products. So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple. Apple can rest assured that I will buy other things from them!
In that case, I’d likely buy a second TP-Link device to create a second network:
TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
Thank you in advance. Long live Apple!
Message was edited by: Jess1911

I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
In your case it should be whatever the IP of the 2wire is, followed by /mdc
Give it a try.
As you can see it shows vendor and loads of info about the line.
I rate it the best domestic modem for line info.
A good modem actually albeit a lousy router.
MDC is the diagnostics and Management Console.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).
Apple router is fine for this. Easy to configure out of the box.
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
The problem arises when you try and interconnect using wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
Absolutely best.. only decent method.
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
The passwords on the TC are for its Admin, wireless and disk access.
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
For ADSL you must have the PPPoE authentication username and password.
So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
hmmm.. I am biased because I see the issues not all the good stories..
The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
See reviews here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
One thing you do need to check.
Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
You cannot change it to Nepal.
To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
If only the whole world would just bow to America.. we could all follow the FCC regs..
http://en.wikipedia.org/wiki/List_of_WLAN_channels
This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Do you have to set up AE inBridge mode with existing wireless modem router?

Hi
I've just bought the AE and Apple TV. My plan was to basically use my existing Netgear wireless modem router for the internet only and set up the AE as the wireless router. I also bought the AE to boost the strength, print wirelessly and I thought it might work better with the Apple TV. The other things I use on my home network are ipad, iphone 4, HP DV6 Notebook, Toshiba Notebook and PS3.
I've plugged the Netgear into the AE with an Ethernet cable. I initially started with the "replace existing access point with AE", as I thought I was replacing the Netgear with the AE. This option left me with internet working and a blinking amber light on the AE.
I then did a hard reset and started again. I diabled the wireless on my old modem/router and chose the "create wireless network" option in airport utility. I think it worked because I have internet and a green light but to be honest I have no idea what I did. I know it's in bridge mode but only because I didn't know how to set up the other options.
Also, I've ended up with three networks out of this process. The default network for the AE (but it has one of those yellow error icons next to it in the available network list), the one I set up and a 5ghz of the one I set up. Neither the default network of the 5ghz network show up in the Internet and Networking control panel, which is where I delete them. I just thought this was odd.
What I'd like to know:
Do you have to set it up in bridge mode when you have an existing wireless modem/router?
If not, is there any benefit to setting the AE up as the router instead of using the Netgear?
If I create a new network should the default network still be showing up in my list of available networks or have I done something wrong?
If I have a 5ghz network, does that mean that the other network I created is only 2.4ghz or is it still dual band?
Considering the devices I have would it be beneficial for me to have a 5ghz network for certain devices only like the Apple TV?
As you can probably tell I have no idea what I am doing. I'm basically just clicking stuff and seeing if it works.
Any help/advice is much appreciated
Thanks
Jo

Hello Jo Sugden. Welcome to the Apple Discussions!
Do you have to set it up in bridge mode when you have an existing wireless modem/router?
You don't have to but, most likely, it will be the best configuration choice when you have the 802.11n AirPort Extreme Base Station (AEBSn) connected to your main Internet router by Ethernet. In this configuration, all NAT & DHCP services will continue to be provided by the Netgear router. This will allow all wired or wireless clients connected to the AEBSn to get their IP address (and be on the same subnet) from the Netgear ... and this would allow clients connected to either router to "see" each other.
If not, is there any benefit to setting the AE up as the router instead of using the Netgear?
If, for some reason, you wanted to create a separate subnet, configuring the AEBSn as a router would allow for this.
If I create a new network should the default network still be showing up in my list of available networks or have I done something wrong?
By default, your AEBSn will create two wireless networks with the same Network Name; one broadcasting in the 5 GHz band, and the other in the 2.4 GHz band. The default name for both of these will be Apple Network NNNNNN. You have the option, within the AirPort Utility, to change the names of each network.
When connected by Ethernet, and in bridge mode, it would be beneficial to name your AEBSn's networks the same as that provided by the Netgear. This would create what is called a "roaming" network ... where you literally can roam with a laptop from one router to the other and still be on the "same" network. This also is a way to extend the wireless range of the Netgear.
If I have a 5ghz network, does that mean that the other network I created is only 2.4ghz or is it still dual band?
As a minimum, you will have three wireless networks: one provided by the Netgear and two provided by the AEBSn. By giving them all the same Network Name, they will appear as one to any wireless client. However, they will all show up in a utility like iStumbler or AirRadar.
Considering the devices I have would it be beneficial for me to have a 5ghz network for certain devices only like the Apple TV?
Yes. Operating a wireless network in the 802.11n Radio Mode in the 5 GHz Radio Band offers the best potential bandwidth ... around 300+ Mbps. The only real drawback of the higher frequency band is that the signal strength drops off more rapidly with distance than in the lower frequency band. Also higher frequencies cannot penetrate objects (like walls) as well.
Ideally, you would want to place your Apple TV or other streaming devices in the same room as the 5 GHz network ... or connect them to the router by Ethernet.

How to configure WRT350N as a router in a network wih a DSL modem/router

Hi,
I'll really appreciate if somebody please could give me some help.
The problem is that I have a Dlink DSL-2640B modem/router AND a Linksys WRT350N router, what I want to do is how to configure them so they both are in the same network, and the WRT350N has access to internet and the computers connected to the DSL-2640B.
Is that possible?....OR...the other option I was thinking was leave the DSL-2640B as a modem only, and have the WRT350 make all the routing wired and wireless.
I'll really appreciate your comments.
Regards.

As per my knowledge it is better to use the wireless router to provide connection to wired & wireless computers. Leave the DSL2640B as a modem, connected to internet port on wireless router.

Jumping gun? Netgear N300 Wireless ADSL2+ modem/router

Hi,
I'm probably jumping the gun here but I've got a Verizon Actiontec GT704WG modem/router and have been disapointed in the last few months by spotty wireless and internet connectivity when nothing else in my house has changed. In addition, I need to make a non-network-ready external HD a network drive so either have to have a NAS adapter (incredibly difficult to find at a local store) and I'm awaiting information on whether or not I have to format (again) my already FAT32 file system drive for an adapter to recognize the drive or whether or not the adapter will work without re-formatting my drive. The work around is the Netgear N300 Wireless ADSL2+ modem router because it will allow me to attach the non-network ready drive without an additional NAS adapter.
However, after reading all the problems that people have with third-party modem/routers and Verizon DSL I'm a little concerned about trying to hook this up as a solution. So I have some questions:
1. Do I have to put the Actiontec GT704WG into bridge mode as Verizon recommends or can I get rid of the Actiontec altogether and just use the new modem/router?
2. I have no idea if I have ADSL+ service with Verizon. Assume I can call and find out or get the info from my account page. But if I do not have that service, will the new modem/router work with basic ADSL service that Verizon provides (ok, that's my really dumb question)?
3. If it's better to just stick with the Verizon modem/router and get a NAS adapter does anyone have a recommendation on a reasonably priced adapter? I don't want a NAS enclosure as I'm not really interested in breaking my external drive and removing the guts so I'd prefer a stand-alone adapter.
4. If I can get rid of the Actiontec altogether, can someone provide some assistance for the proper settings to get me setup without too much fiddling? I'm so sick of spending hours trying to troubleshoot computer issues!
I have an older PC wired into the Actiontec, a network printer attached to the Actiontec, and am running windows XP pro on the PC and have a laptop that is running windows 7. Evil Empire Microsoft has made the lovely choice to make it difficult sometimes for the two OS to communicate and I'm tired of leaving the PC on all the time so that I can use my external drive (if Win7 cooperates) as a network drive through the PC. I'd rather have it as a real network drive operating independently of the PC and point my iTunes, word processing, and database programs to the network drive rather than trying to get them to run through the PC into the external drive.
I wish Verizon would offer more choices on modem/routers, especially ones that offer you the option to add a usb storage device as a network asset!
Thanks for any help! I know I'm jumping the gun a bit, but I'd like to return the new modem/router ASAP if it's not going to do what I need without tons of hassle.
Solved!
Go to Solution.

Since the Netgear you have is a DSL modem, there is no need to use the ActionTec. Disconnect it from the line and keep it around as a spare modem should you ever need it for troubleshooting purposes. Also, even though the modem you are buying is marketed as an ADSL2+ modem, the technology is specced to be backwards compatible with traditional ADSL. The ActionTec you currently have is an ADSL2+ modem itself, so that should back up that statement enough. The only thing you need to make sure you verify before switching the ActionTec out for the Netgear is what authentication mode the ActionTec is using. This can be set to either PPPoE or DHCP (shows as Routed Bridge mode) and should show up on the main status page when you visit the ActionTec's web inteface. If you're using PPPoE, you should have no issues getting the Netgear to work. If you're using DHCP, you will need to either close the MAC address of the ActionTec into the Netgear, or leave the modem overnight before you are able to obtain an IP address.
Otherwise the Netgear depends on how you decide to set it up. If you set it up through the Web Interface (http://192.168.1.1/ for Netgears, normally), you need to make sure the DSL Virtual Circuit is set to use 0/35, VPI of 0, VCI of 35. The modem should auto-detect this on first boot. Additionally, if you're using PPPoE you'd need to use your Verizon Username and Password to connect the modem. If you set it up using the Setup CD, it should do all of that heavy lifting.
ReadySHARE (what you're looking to set up with the External Hard Drive) uses the same Windows File and Sharing setup, however it does it using Samba shares, FTP and HTTP since the router runs Linux. The reliability you see might remain the same, but I suppose it's one of those things you need to wait and see how it works once the router is set up. Just remember, the speeds to the drive will not be as fast as going through a PC with better hardware under the hood.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Connecting HP 6980 to Brighthouse Modem/Router

After installing Maverick OS 10.9 (with update to 10.9.1) I have not been able to connect my printer to the network. I cannot get it to connect to get an IP address. I am using a Brighthouse AARIS modem/router. It was working fine before update of Mac OS. Now no IP in printer setup. Have had Brighthouse tech out 2 times and they tell me it is working fine when they hook their laptop up to test the unit. I still believe it is the AARIS unit as I have seen a difference in the lights on the Modem. The lights on the printer are soldi blue (wireless indicator) and the wired light blinks when I hook up to the modem via a patch cable. Printer works fine with a USB cable direct. Suggestions?

GPaw wrote:
After installing Maverick OS 10.9 (with update to 10.9.1) I have not been able to connect my printer to the network. I cannot get it to connect to get an IP address. I am using a Brighthouse AARIS modem/router. It was working fine before update of Mac OS. Now no IP in printer setup. Have had Brighthouse tech out 2 times and they tell me it is working fine when they hook their laptop up to test the unit. I still believe it is the AARIS unit as I have seen a difference in the lights on the Modem. The lights on the printer are soldi blue (wireless indicator) and the wired light blinks when I hook up to the modem via a patch cable. Printer works fine with a USB cable direct. Suggestions?
Hello,
I am the Forums Manager for Bright House Networks. There should be no reason why this doesn't work. Reach out to me at [Personal Information Removed] or here in IM and I will get this taken care of for you.
Gary

Best modem/router for a Mac / PC Combo

Hey guys
I've got a mac pro and macbook pro hooked up to an aging Netgear modem/router - the former via ethernet, the latter via wireless. I also use it for a wired connection to my playstation 3 and a Windows PC
I basically need a new, faster modem/router that works well with both mac and PC. One day I'll bin the PC, but for the moment, it's part of the equation
I need at least 3 ethernet connections (high speed if poss), and support for 108 / wimax / mimo / N / whatever protocol happens to be out there
I know I won't get the 'perfect' router but am prepared to compromise in certain areas.
Price is a factor, but I'll spend more on something robust
Any help appreciated - sorry if my explanation if oversimplistic, but that's how I like it
Cheers, L

faganel wrote:
Hi,
I have similar to this one ( http://www.asus.com/products.aspx?l1=29&l2=172&l3=743&l4=60&model=1277&modelmenu =1 ), but a one or two years older and till now I haven’t lose a connection.
I’m accessing to this with iMac, Win (HP, IBM) laptops, iPhone… one of the best investments (beside iMac and iPhone.. )
I have a PC with an ASUS MB (see my profile), and have great respect for ASUS products. I was not even aware that they made routers.
Thanks for the information.

AE wired to wi-fi modem/router

Similar Messages

Maybe you are looking for