AE works, modem works, but can't get online

This problem is driving me batty! I recently purchased a new G4 Powerbook (running Tiger 10.4.2) and Airport Express directly from Apple. At the time I didn't have internet access at my house yet but was planning on getting it within a few weeks. I was ecstatic that in the meantime I was able to take my brand spanking new computer and AE to a friend's house and get online wirelessly from there quite easily by connecting the AE to their home router. I later had Adelphia come out to my house and install cable internet. The cable tech didn't know beans about routers but he did get my internet working pretty quickly through a direct ethernet connection from the RCA DCM425 modem to my laptop. After he left I surfed online for a bit and then decided to try hooking up the AE, expecting it to work as simply as it had at my friend's house.
Ha!
I have been messing with this thing for nearly a week now and have not been able to figure out what in the world is the problem. It works beautifully at my friend's house and not at all at mine. AE has a green light, the modem lights look right and it works when connected directly to my computer, I have a full signal and airport is on and the checkmark is on next to my network and interference robustness is on and Internet Connect says I'm connected via ethernet and all systems are go.......but when I try to open a webpage (any page), Safari sits and thinks for the longest time before telling me I'm not connected to the ethernet. Power cycling everything and exhaustively searching all the settings hasn't helped.
It can't be the AE because it works at my friend's house, it can't be the modem because it works when I'm hooked in directly, so it has to be some setting somewhere in my laptop, right? I know I'm supposed to be on DHCP, not PPPoE, I've tried it with and without distributed IP addresses, I've gone through Network Diagnostics, Airport setup, Admin Utility, network preferences, Safari preferences....I've tried resetting everything to the defaults, I've downloaded the latest Airport updates, I've tried using a different browser, I've tried holding my breath and crossing my fingers and turning blue, but nothing works. Airport Express is supposed to behave as a wireless router...but instead it's behaving like a mute piece of pretty plastic and I'm losing sleep at night because I can't stand being beaten by a machine. Please help - I'm losing my mind!! Thank you o angels of the discussion boards...
Powerbook G4   Mac OS X (10.4.2)  

Danae leFae
DHCP and PPPoE and where they apply (i.e. at the internet or wireless side of the AX and in the Powerbook OS) can be confusing.
The AX configuration may not be what your cable modem needs, although it may have been fine with your friends internet connection (was it a cable modem like yours or a DSL modem router?).
Can you check your laptop Network Preferences settings for the successful ethernet wired connection to your cable modem - ( but make sure it is connected up and working for the internet first). Then check what it shows for the Built-in Ethernet configuration TCP and PPPoE tabs.
This should clarify what is needed for the AX configuration and the Powerbook when using the AX, and maybe put you on the right track.
G5PMac,G4iBook   Mac OS X (10.4.2)   Airport, MTD12/36

Similar Messages

  • Connected to the network but can't get online

    Hi there- I have a WRT54G router that is wirelessly connected to an ibook. There are times that there is an additional dell laptop that i need to get online with and although the dell says it is connected to the network (with excellent strength) it can't get online i get the 'problem loading page'. I have used more than one computer with this router before, although in a different apt with a different provider (if that matters). Anyway, this is truly annoying so if anyone has any insight that would be great! I did read in the forums that its possible there is only one IP address, and admittedly my knowledge of networking is basic at best, i know that more than one computer has been connected in the past. I did try turning off the mac then connecting the Dell and it still didn't work. Thanks in advance for ANY advice! Sara

    Hi . go through this link for reference . Here , under the "basic wireless settings" subtab , you need to change the wireless network name to any non-linksys name and change the channel to either 1 or 11 .

  • Keyboard found/working - but can't get into setup in system preferences

    Hi,
    I've had the Apple Wireless Bluetooth Keyboard (the flat aluminum one) for about a year. It works great, but recently want to see if I could modify some keys.
    Wen into System Preferences, clicked "Set Up Bluetooth Keyboard" and it just searches for the keyboard forever, but never finds it.
    Weird thing is if I go into bluetooth pref pane keyboard is there and paired, and as I say works fine. I don't know if I can re-map any soft keys / function keys with this keyboard (because I can't get into prefs) but I would like to find out!
    TIA...Larry

    Hello Larry:
    What are you trying to do? You can change KB shortcuts, but you cannot make a "K" key become a "Y" key.
    Barry

  • TS2634 My Ipod Touch fell and cracked. It works but, can I get it fixed?

    My Ipod Touch fell on cement and now, It is not looking in good shape..It cracked. So, i was wondering if i could find some answers. Can i get it fixed or do i need to buy a new one and lose all my progress?

    If it works, make a backup. Go to Settings > iCloud > Storage & Backup > Back Up Now (assuming you have iOS 5.0 or later; if not, let us know).
    Technically, you don't need to buy a new one. You get a discounted rate for an out-of-warranty replacement iPod since this type of damage is not covered under the warranty. For exact pricing, see: http://www.apple.com/support/ipod/service/prices/
    You do not lose your progress if you have a backup.

  • HT201263 I am confused if my daughters i pod is blocked. Everything works except safari. I did block it when we thought we'd lost it but when we found everything seemed to work but can not go online

    I need to know please when you request a block what it does to the i pod touch. We thought we'd lost it..., blocked it and then found it again. Most things appeared to work but cant seem to go online. I have done a full system restore on it and updated to ios6, but still no internet. Please help!!!!!

    Restore to factory setting/new iPod if you have not done so already
    Does the iPod connect to other networks?
    Does the iPod see the network?
    Do other devices connect to the network?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Connected to WIFI but can't get online

    I am one of the many it seems.. but nothing works
    Yhis happened suddenly:
    iPod says I am connected to my home network but I get a not connected error message when I try to get online.
    Did the reboot routine.. forget site and re connect..
    2 PC's on the network are doing fine.
    One PC got a message that there is a device on the network causing a problem.
    HELP

    Oscarl,
    You are on a iMac forum. There are forums for iPods. I would recommend starting here then reposting so you can get the assistance you need. Look on the left hand column and you will see all the different models of iPods. Choose yours and then you will be on the right path.
    Also if the iPod is new you can call AppleCare or you can visit an Apple Store for help.
    Roger

  • Airort Card Works, Airport Extreme Works, but can't get to Internet

    I have a friend's MacBook (white, 2GB RAM) that he needed the OS upgraded on. Before upgrading the OS (Tiger) the machine would not connect to the internet through Safari or though any of the OS components like System Update, etc (even though the Airport Card showed full signal). I upgraded his machine all the way to OS X Snow Leopard and it's still the same. You can log into the Network panel, the Airport Card sees the network but Safari and any other OS components that need the internet cannot connect.
    What's the problem and solution?

    I have a friend's MacBook (white, 2GB RAM) that he needed the OS upgraded on. Before upgrading the OS (Tiger) the machine would not connect to the internet through Safari or though any of the OS components like System Update, etc (even though the Airport Card showed full signal). I upgraded his machine all the way to OS X Snow Leopard and it's still the same. You can log into the Network panel, the Airport Card sees the network but Safari and any other OS components that need the internet cannot connect.
    What's the problem and solution?

  • I'm connected to my airport network but can't get online

    2 days ago, i was online and everything was working fine.
    Yesterday, i tried going online and i was told that i was not connected to the internet even though i had full signal bars from my airport. I've restarted my computer a dozen times, checked all my internet connection settings, but nothing worked, i'm still being told that i'm not connected to the internet although internet connect says i am. contrarily, network diagnostics says i am not connected.
    this happened to me once before over the summer. i gave up and didn't use my computer for about a week. when i tried using it again, the internet was just fine. however, i do not have the luxury of waiting a week because my school curriculum requires the use of the internet.
    what's wrong with my computer and how is it that i connected just fine 2 days ago, but cannot since then? please help!
    Message was edited by: kukumuzu
    if relevant, my software versions are as follows:
    Safari 3.1.1
    Internet Connect 1.4.3
    Network Diagnostics 1.0.2

    You might want to update Safari to 3.12. I would empty the safari cache. (Safari>Empty Cache). Then quit Safari. System Preferences>Network>Show:Airport>TCP/IP. Insert the following into the DNS Servers box;
    208.67.222.222
    208.67.220.220
    then hit apply. Now launch Safari. You should also try powering down modem, router and Mac and power up in 2 minute sequence; modem, router, Mac.

  • HT4628 Connected but can't get online.

    On my iMac, I keep getting the msg "This webpage is not available" even though I'm definitely connected through my wifi. My ipad is working fine. Any ideas? This happened overnight. Thanks people. I really want to avoid having to spend $$ on this if possible.

    When you switch device connections to the cable router, you must cut the power on the cable modem (and remove the battery if there is one) for a few minutes before reconnecting it. Otherwise, the cable modem will only connect to the MAC address of the device that it was last successfully connected to.

  • On the network but can't get online

    I am a teacher on a school wireless network and I can’t seem to connect to the internet. My problem has baffled the tech guys here so I was hoping you might have a suggestion.
    I have put the proper password and code in and my signal icon at the top says I am connected to the school wireless network but when I actually try and go online the web browser is blank and eventually times out.
    Other laptops have no problem connecting and as far as I can tell, mine is set up exactly the same as theirs. Can anyone think of any reason for this or have any suggestion of how I could fix it?
    Thanks

    In case you are wondering what this TCP/IP business is. Getting connected requires two separate steps. The first is hooking up with a wireless router, which is equivalent to plugging in an ethernet cable; this is where the WEP password comes in. After that is done, though, your laptop still has to be set up to communicate properly with other computers on the network. Typically, this is done by something called DHCP that gives your laptop a temporary IP address for proper routing of data packet. Your IT spec should have told you how to configure iBook to do this; does he or she know anything about Macs? One would think that a school network would have plenty of Macs.

  • What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2  modem and I can't get the configuration working. What modem does Apple recommend?

    I am having problems setting up airport extreme.
    What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+  modem and I can't get the configuration working. What modem does Apple recommend?

    Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
    http://www.actiontec.com/support/product_details.php?pid=41#q27
    Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
    The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
    The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
    If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
    So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

  • Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • Help please - have a Nano and a Shuffle and neither are working! The Nano wheel appears to have stopped working - I can't get it to do anything. I've done the reset,it worked the first time but not since. And the shuffle won't sync with my library!

    Hi,
    I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
    So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
    Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
    Thanks

    Hi Bblairjones,
    If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
    Apple Support: iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Regards,
    - Brenden

Maybe you are looking for

  • Authorize 2 Apple IDs in 1 mac

    Hello, we have a Mac at home, and each member of the family has a different user in it. I downloaded my past purchases with my Apple ID, but when my father tried to download his past purchases (with a different Apple ID) the message "This computer is

  • Daylight Savings Time and Time Zone Issue:

    Howdy!  Many of us woke up this morning to be dismayed to find that our iPhone was TWO hours behind instead of falling back one for the Daylight Savings Time adjustment, and were late for church.  I have an iPhone 4S, with iOS 5... I was working at t

  • High Availabilty with BPEL

    Hi, if i want to install BPEL in HA-mode, do i have to install the MIDTier (OC4J-Containers) in active-active and then install the bpel PM? Or can i install the OC4J-Containers on both machines without the Cluster Topology option and use this option

  • Attribute containing DN link is deleted when DN of linked obj is modified

    ODS is configured to support moddn / modrdn Some attributes contain DN link to other object (linked object, aka source object). For example the "manager" attribute on a normal user object and the "direct reports" attribute on the manager user object.

  • FPN - NetWeaver Content Producers Folder is empty

    Hi, I am trying to implement RRA scenario in the FPN. I am able to register consumer portal in Producer and the connection test was successful. I am able to see the consumer portal entry in Producer portal. Both the portals are in same domain and hai