AE2050 - problems to open case all-in-one pc

Hi everyone, I'm trying to open my AE2050.
Even if I remove all the screws I can not remove the rear black cover. I can not even remove the stand. Any of you have a technical document or some guide pictures?
I would like to upgrade the RAM...but it is a little bit difficult if I can't open my AE2050!! 
Thanks in advance...

First remove the screws from the stand and then remove the top plastic cover of the stand.
Then you'll be able to access the screws and remove the stand from the chassis. Then you can take of the back cover.
http://www.msi.com/service/faq/365.html

Similar Messages

  • Having problem with HP Deskjet All-in-One 3050

    I am trying to help someone who was given a Compaq Presario C700 (running Vista) and a HP All-in-One 3050 by her son.  She doesn't understand how to use her computer, and it contains the remnants of things people have done to it trying to help her.
    I believe her son set her up to use gmail by logging in the the gmail site and reading/writing her mail there.   She would like to print her mail on the printer, and we managed to do that, even printing attached photos,  but now printing doesn't work.   It prints a Gmail header and her email address in color, but the text of the message, which is in b/w doesn't get printed.  Print preview shows it as it should be.    I created a simple document in wordpad and tried to print it and the same thing happened, except in this case the page was completely blank.
    On the other hand, when I printed her inbox at gmail.com using File>Print, it did print the titles of messages listed.
    The printer is connected to the computer over the local wireless network. 
    Could this have something to do with the cartridge being used up?   Also, were that the case, wouldn't the printer  indicate that somehow.
    Any suggestions about how to proceed would be helpful.

    Hello, 
    If you want to have the printer hooked up with a USB cable with printing option, then please try the below steps..
    1.Click Start button on the Computer .
    2.then click on Control Panel .
    3.then Printers and Faxes
    4.On top-left, click on Add a Printer
    5.Click on Add a Local Printer
    6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
    7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
    Now try printing . It should work.
    If you want to try using wireless installation then please visit www.hp.com/go/wirelessprinting
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Blasted printer problems - HP Photosmart C6180 All-in-One

    Bought a spanking new HP Photosmart C6180 All-in-One and installed the drivers. When running the HP Setup Assistant it had a blank list to select from.
    I came across this tip from macosxhints.com
    "If your system drive was set up with a case-sensitive HFS file system, HP's All-in-One installer will fail when it gets to the HP Setup Assistant -- it will ask you to "Select Device" and give you an empty list. To get the installer to work, you have to install it on a case-insensitive file system. I've confirmed this with version 7.9.1 of the PhotoSmart C6100 series and version 7.9 of the Officejet 7310 series drivers.
    The solution? The only one I've found is to re-format and install on a file system that is not case sensitive. After hearing back from HP's tech support, they confirmed the problem and the solution:
    Thank you for contacting HP Total Care.
    The software for the Photosmart C6180 is not supported on a case sensitive partition. You will have to install the drivers on a case-insensitive partition.
    I only wish they had mentioned that anywhere in the online troubleshooting section. Sigh." http://www.macosxhints.com/article.php?story=20070623004646642
    Can someone point me in the direction of:
    "Setting up a case-insensitive partition"
    thanks!

    post not answered

  • Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

    I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!

    Hi,
    I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
    Will be helpful to know the exact router brand and model.
    As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
    Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
    Enter System Preferences > Print & Scan.
    Click the plus sign.
    Click the IP icon.
    Select the HP Jetdirect Socket protocol.
    Enter the printer IP address into the Address field
    Now try printing using the newly created print queue, listed as the printer IP address.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can anyone help; re: Faxing problems with my 6200 all in one

    Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
    when a fax is being received or when we are sending one.  When the fax fails and we stop the blinking lights, it self tests then turns off.  Sometimes when it does this we get an error message printed that says "Power Failure."  The party being faxed gets 1/2 a fax or 1 page out of 5.  I'll unplug it from the electric and plug it back in and then it will work fine for a day or two.  We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't.  We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
    Any ideas???  The machine is 5 years old and has never given us any trouble until now.  Is it time to upgrade?
    Thanks so very much!!!!
    Joanne

    I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA,  using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

  • Ink Cartridge problem with the 7525 all in one printer

    I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged.  also the ink levels on the new cartridges are not appearing full.  they are all  new HP cartridges.

    The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Power problem with my 4620 all in one printer / scanner / fax

    Hi,
    My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
    Scenario:
    The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
    My solution, I have to disconnect the power supply from the printer,  then reconnect and then press the Power On button.
    This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
    Any ideas?
    Thank you in advance!!

    maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
    found doing a quick search of the forum
    all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
    JGG

  • Problem adding HP J6400 all-in-one printer

    We have an HP Officejet J6400 all-in-one printer here at work, and all of our computers have had no problem adding this printer except one: an older iMac, PowerMac 6.1 (with the white domed base). The driver is installed, and the computer sees the driver, but when I click to add it eventually it gives me this error:
    "An error occurred while trying to add the selected printer. client-error-not-authorized"
    I was on the phone with HP for an hour and they couldn't figure it out on their end. Has anyone had a similar problem, or have a solution?

    Hi,
    I request you to try the following:
    For network connection:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
     For USB:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say thanks by clicking the "
    Kudos! Thumps Up" which is on the right
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
    Regards,
    Ray

  • Airport Extreme printing problem w/ HP7 410 all-in-one

    I just purchased a HP officejet 7410 all-in-one.
    I can print using USB cable connected to printer.
    However, I CANNOT print connecting the USB cable from printer to Airport Extreme and using Bonjour printing? The print job spools than just stops?
    Any help would be appreciated....
    macbook pro   Mac OS X (10.4.8)  

    Hello HevnLgh,
    Thank you for your input. I tried to follow your instructions but had trouble right from the start. I got to HP uninstaller and clicked continue but there was no printer listed. It just said "device" and uninstall was greyed out. I decided to just continue so I reset the printing system and repaired the  disk permissions. 
    It took me a couple of tries to reinstall the printer from the Apple website because at first it couldn't find the device to add so I tried using the IP address on the next tab and that seemed to do something but it still wouldn't print. The printer was found after I  went back and tried again and everything seemed to work this time (whew).
    I tried the update procedure on the printer itself and it still can't connect with the server, but the original problem with the duplicate copy on shut down seems to have resolved itself.
    The bottom line is my printer is working like it's supposed to (for now anyway)  and I didn't get two copies of my printout so thank you again for your help.  It's good to know I can go somewhere for help when I have a problem.

  • Problem installing Photosmart C6180 All-In-One software

    I've "googled" and found several similar installation issues but none quite match mine.   When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified."   The file that it is attempting to find is found in the Dialog window heading:
    c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
    Using %temp% I am able to verify that the 7zS52C3 folder structure exists.  However the ",sourcepath.setup" folder shown above is incorrect.  it should be just "setup".  
    I've ran this install several times under  different accounts, including creating a new admin account.
    I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue.  I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
    I am running Windows Professional x64,  My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer.  I need the software primarily for "scanning to computer" functionality.
    Any help is appreciated.

    Hello @DirkPittP,
    Welcome to the HP Support Forums!
    I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,so​urcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
    Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
    Step 1: Uninstall Drivers:
    First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
    Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
    This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
    Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
    Step 2: Clear the Temp Files:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
    Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
    Once the Temp folder is emptied, close the window
    Right click on your Recycling Bin and select Empty Recycling Bin
    Step 3: Download Drivers:
    Please click here to download the latest drivers for your printer.
    Once the website opens select the Download button on the top left
    Allow the download to Run
    Once the download has completed the installer will automatically extract
    After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . .  number sequence it refers to this time around.
    Step 4: Rename Temp 7z Installer package:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder locate the 7z . . . folder that shows in there
    Right click on the 7z folder and left click on 'rename'
    Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
    NOTE:  Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any  'sourcepath.setup' folders at all.
    Step 5: Install Printer:
    Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
    Scroll down to the bottom of the installer files
    Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
    An installer window should pop open
    Follow through the with the onscreen instructions to reinstall your printer
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!  
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • I can't open the all-in-one sidebar

    my sidebar was working just fine. Now today I can't open it. I usually just left-click on the left side of the screen, but that doesn't work any more.

    Hi,
    If the sidebar came with an extension, you can Reset Firefox, install the extension first before installing others, and check. This would also hopefully help with the normal sidebar.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Printing problem with HP F380 All-in One printer.

    My HP F380 All-in One has stopped printing in colour. Don't know if I've accidentally changed a setting but I've unchecked 'Print in grayscale' and no difference.  Can anyone please advise.

    Hi there,
    Welcome to the HP Forums!
    I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
    For further assistance, I will need to know the following:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printer: Driver Update Problem with HP 6700 All In One Printer

    My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

    Hi,
    I request you to try the following:
    For network connection:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
     For USB:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say thanks by clicking the "
    Kudos! Thumps Up" which is on the right
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
    Regards,
    Ray

  • Firefow will not open at all on one computer and on the other it opens but will not load. I just added a new wireless router, could this have anything to do with it, it had been working fine up until I installed it Tuesday night. Internet explorer won't

    I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)

    Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
    Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual.

  • How to open OMNI all in one to upgrade memory

    Would like to upgrade memory to 8 mb.  How does one open the case?

    Perfect.  thanks so much.  Upgrade went smoothly from this.

Maybe you are looking for