AE7 license configuration data no longer usable

I own a copy of AE7 running on power mac G5. Now I am getting the following message:
"the license configuration data for adobe photoshop is no longer usable"
Any help is much appreciated.

Error: Activation Server Unavailable | CS2 or older products, Acrobat 7
Mylenium

Similar Messages

  • The license configuration data for adobe no longer usable

    What more can I do with: The license configuration data for adobe (Photoshop, Illustrator etc) is no longer usable. I have tried the License recovery download all 3 times...

    Without system and version information nobody can help you. and instead of muddling around with teh license recovery tool simply reinstall.
    Mylenium

  • Photoshop CS, lost "license configuration data"

    Photoshop CS question. Has anyone ever suddenly lost their "license configuration data"?
    I get this error when I start up Photoshop: "The license configuration data for Adobe Photoshop is no longer usable".
    I click "OK" and it takes me to the activation screen with the serial number already entered. Activate it on line and I get an error so I go to phone activate... the guy I talk to says the serial number (the one that is automatically entered by my copy of Photoshop) is not valid. I've had this copy of Photoshop on my PC for about 5 years and it has always worked fine. Any help would be greatly appreciated.

    Is that photoshop cs (photoshop 8)?
    If so, then your running into the fact that adobe took the activation servers offline.
    more info:
    (even though it says cs2, it also applies to cs)
    http://forums.adobe.com/thread/1114930?tstart=30

  • CS2 license config data not usable after upgrade to Tiger

    When I upgraded to Tiger from 10.3.9, I did an archive and install. Now I can't run any CS2 apps...I get the error "The license configuration data for Adobe Creative Suite is no longer usable.", then it wants to activate.
    Any thoughts?

    Hi, Scott.
    See "Troubleshoot activation problems (Acrobat 7.0, Adobe Creative Suite 2.0 on Mac OS X)."
    FYI: I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
    For example, in the case of your problem, the item above was found with one search of the Adobe Support knowledge base for "license configuration data" with product Photoshop.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • HT1386 My itunes account was set up on an old computer which is no longer usable.  I would like to sync my phone before I lose my data. Can I do it on another laptop?

    My old computer on which I set up my itunes account and used for backing up my iPhone 3GS is no longer usable.  Can I sync my phone and back up on another computer?  How do I go ahead and do this.
    Thanks

    See https://discussions.apple.com/docs/DOC-3141.

  • SQL Server 2008 Express - timeout issues, "This SqlTransaction has completed; it is no longer usable."

    Good morning all!   I work for a small business that uses a robust Accounting/Inventory database called Traverse (or Open Systems) and is run on a desktop computer using SQL Server 2008 Express.
    We don't have an IT department, but I have a bit of knowledge, so I've been the go-to person to handle any tech support issues in our tiny 5 person office.  I've been reading up on SQL Server 2008 Express, but am completely stumped on this issue.
    Our database would work consistently well for quite a while - sometimes getting disconnected from the server and requiring a restart of either the SQL Server itself or the Traverse License Server.
    About two weeks ago, I noticed that nobody had ever run Windows Update on the desktop that we have SQL Server on, so I spent the better part of a day updating everything, hoping it would help some of the little buggy issues we've been having.   Unfortunately,
    by applying the updates, I think it may have altered settings - or updated appropriately and our functionality is diminished.
    Basically, we have 3 users connecting into the server to use the database at any time.  Sometimes we might not be accessing information constantly, and it appears we're getting a timeout message in the SQL Server Log - stating the system was awoken
    by user activity after around 25-30 minutes.  When this happens, the system is painfully slow and locks up, giving SQL Server Connection errors, or the "This SqlTransaction has completed; it is no longer usable." message.   I noticed that
    there is a connection timeout of 15 seconds set for our SQL Server, but it's greyed out in the dialog box I saw it in, and am not sure if that's even a culprit.
    I'd just like to get this working again to where we can continue to use the database throughout the day without waiting for it to seemingly load all of the data after "waking up".  It's to a point that one of my employees is coming into my
    office every 5 minutes complaining that she can't do anything in Traverse.  I'm about to lose my mind!  
    If anyone has any clue what could be the issue, I'd be so grateful for help.  If you need any logs, messages, etc.. please let me know which and I will share them.  Thank you again!

    This is known as the Zombie Check exception. It is generally caused by trying to commit a transaction twice or trying to roll back a committed transaction. It can also be caused by a connection closing before the transaction is complete. In you case I would
    suspect the latter.
    See this article on setting the default timeout.
    Andy Tauber
    Data Architect
    The Vancouver Clinic
    Website | LinkedIn
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • TS4009 Is there anyway to establish when my phone last backed up on iCloud if the phone in question is no longer usable?

    Is there anyway to establish when my phone last backed up on iCloud if the phone in question is no longer usable?
    My wife's phone was dropped down the loo just a day after returning from holiday with all our holiday snaps/vids on it. The phone is dead and only showing on iTunes as in recovery mode. No problem I replied, as it should have backed up on iCloud, however she then advised that the iCloud storage full message had been showing recently but was not sure for how long it had been there. Is there anyway to tell when the last back up occurred or do we have to wait for a new device to be be restored?

    In 3 years I never synched my calendar to iCloud for fear I would lose my data. I explained all of this (and the fact that my phone had never been backed up to iCloud or iTunes to the tech at the Genius Bar (I was having wifi issues with my phone which is why I was there so I COULD START BACKING UP) and he assured me synching / merging to iCloud would not delete my calendar events: well, it did. Yes! I have spent hours with apple tech support and had my iTunes account in "troubleshoot " status so the engineers could go into iCloud to see if they could retrieve events. They found nothing. I just don't understand where it goes if it's on the phone? I know there are ways forensic engineers retrieve "lost " data on cell phones. I just thought it might be worth it to post on here and see if there is any hope   .

  • "error in accessing Star office configuration data"

    Hi I'm posting this on behalf of someone who has Star Office 7 pre-installed on their PC. They are no longer able to open Star Office and are getting the message in the title above. Their message to me is below:
    the exact message is Star office cannot be started due to
    an error in accessing Star office configuration data
    It is not a trial version it was with the comuter when I bought it from Aldi.
    It is Version 7 Star Office. I have not recently added any more programs, or changed the way i am running the computer.
    I cannot find this issue reported in the forum. i have found a similar open office issue in the faq.
    OpenOffice.org fails to start, and the following error message appears:
    OpenOffice can not be started due to an error in accessing the OpenOffice.org configuration data.
    Please contact your system administrator.
    The following internal error has occurred: Get Storage: "No Content".
    The message often occurs because a file named Common.xcu becomes corrupted. In most cases, this file becomes filled with 0s. The problem seems to occur most often in Windows, possibly as a result of a crash or an improper exit while OpenOffice.org was open.
    http://documentation.openoffice.org/faqs/various_topics/019.html
    are they comparable? if so, could someone advise on transfering the recommended action to Star Office 7? Thanks! Nick

    Thursday 15 February 2007
    I am assuming that you are referring to a Windows system.
    SO7 and OOo1.1.x are based on the same OOo build series - 645. Most of the time comments about one apply to the other, except in the case of SO7 commercial addons. (SO8 is 680).
    The error message indicates that their is corruption in some kind in the User data found in
    \StarOffice7\User.
    The easy way to fix it is to back up the User folder, then delete it and let SO7 rebuild the user data.
    You can try backing up and deleting Common.xcu only--it's found in two places, in both the Share and User folders.
    \registry\data\org\openoffice\Office
    I suspect the one in Share is used for the creation of the one in User, but I am not sure.
    Phil

  • 6.40 J2EE Engine Configuration Data

    How can 6.40 J2EE Engine Configuration be accessed externally by 3rd party software?
    The 6.20 J2EE engine allowed all configuration data, cluster setup, servers, dispatchers etc. to be exported as an XML file. With the 6.40 J2EE Engine all data is stored in the database. In the configtool, there is an option to export unsaved changes to XML, but this only appears to export Secure Store Data. Can this secure store data be used to connect directly to the database from external application in order to read configuration setup.
    Many thanks.

    Thanks for the reply.
    Basically, I just want to able to read the j2EE Engine configuration, i.e. how many instances, what are they called, how they are configured, how many dispatchers, servers etc.... The config.xml file that could be generated from the configtool of the 6.20 J2ee engine contained all the information that I needed, but this xml file is now no longer available with 6.40.
    Best regards,
    Eoin

  • Save configuration data inside order processing

    Hi all,
    does anyone know how to save configuration data during the order processing but outside the configuration itself?
    Problem:
    - we cannot use the BAPI_CREATE_SALES_ORDER because we are inside the order processing which locks the order for the use of the BAPI.
    - we recieve information after the configuration is finished that has to be saved in the configuration, too. At this point we can no longer use the user-exits of the configuration.
    Do you have an idea whether there is a function module that could be used, or is there any sample coding out there?
    Any help apreachiated.
    Best regards.
    Norman

    you can chnage the variant configuration data using below bapi with strcture    order_cfgs_value      =
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument        
          order_header_in       =
          order_header_inx      =
           TABLES
          return                = return_lt
          order_item_in         =
          order_item_inx        =
          partners              =
          partnerchanges        =
          partneraddresses      =
          order_cfgs_ref        =
          order_cfgs_inst       =
          order_cfgs_part_of    =
          order_cfgs_value      =

  • RSYST-CODE-input data too long

    we have implemented ESS on EP 7..when we try to naviagte through my workspace and if select any services such as Performance Mangement , Leraning and development it will take us to a screen where prompt us to log for Production system ,,...
    Service :WEBGUI
    RSYST-CODE-input data too long
    if i give necessary acces it will connects to the R/3 ..
    is there any coonection based configuration to be check in order to by pass getting this screen..
    regards
    Buddhike

    Hi Lynton,
    As mentioned in the thread you listed, it is possible that this error is being caused by using certain characters, such as ü, á, $, &, -. In order to check if any catalog has strange characters, please check in transaction SPRO -> Supplier Relationship Management -> SRM Server -> Master Data -> Define External Web Services. Check in "Web Service ID" if any catalogs contain strange characters.If so, remove them and retest the issue.
    Kind Regards,
    Conor Harkin

  • Data no longer available when SALV_WD_TABLE GET_MODEL called

    Hello
    I created a view that retrieves data from one table to select a row in the table and proceed to the second view but I get an error like this:
    Data no longer available when SALV_WD_TABLE GET_MODEL called
    I did check the mapping between my view and the componentcontroller
    thank you

    There are several possiblities for this error.
    1) In your table, is there any field name starts with Number?
    2) Is your application 2 level process?( i mean two views? based on alv another alv)
    and Please check the below note.
    1528254
    and below
    Data no longer available when SALV_WD_TABLE GET_MODEL called
    error while testing a sample web dynpro
    If youare binding dynamically check this thread
    Assigning data to Dynamic ALV
    Regards
    Srinivas
    Edited by: sanasrinivas on Dec 14, 2011 11:51 AM

  • Client copy with configuration data in R/3. Is there any effect on EBP sys

    Hi all,
    We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
    In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
    My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
    Can you please reply immediately. It is very urgent.
    Thanks in advance

    waiting online

  • PI 7.3 - AEX "unable to read configuration data" and login problems

    Hello Friends,
    after installation of AEX, i'm facing some problems.
    1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
    2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
    Can somebody help me?
    I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
    Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
    Message
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Stacktrace
    Thrown:
    com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
    at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
    at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
    at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
    at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
    at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
    at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
    Please let me know if I am not clear.
    Edited by: Clarence on Feb 6, 2012 3:28 PM
    Edited by: Clarence on Feb 6, 2012 3:28 PM

    hi,
    >>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    if you have java stack only there is no exchange profile anymore...
    https://weblogs.sdn.sap.com/pub/wlg/28334
    Regards,
    Michal Krawczyk

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for