AEBS Airport Extreme Printer connected by USB not recognized

My in-laws literally just bought a brand new AEBS yesterday. Plugged it in, the the Canon MX7600 multifunction printer into the AEBS usb port. My in-laws old Windows PC is connected to the internet via an ethernet connection to the AEBS.
1. PC can see printer and prints fine, no problem
2. AEBS cannot see printer using Aiport Utility v5.4.2 and the AEBS firmware version 7.5 when using in-laws brand new MacBook Pro which is connected wirelessly to AEBS.
Can anyone out there help?

Have you tried the steps in "Printer troubleshooting for AirPort Base Stations and Time Capsule".
And you are aware that you will only be able to print... right? The USB port on the AEBS does not support FAXing nor scanning.

Similar Messages

AirPort Extreme (n) connecting Internet, but not Printer or AirTunes

I have had a new AirPort Extreme (n) network for about 6 months, installed with the newer utility etc. Connected was ADSL Internet and a printer. Also a previous-gen AirPort Express/HiFi playing AirTunes, all on the single network, "hosted" by the Extreme. All working well.
Suddenly, the computer won't recognize the printer connected to the Extreme, yet the ADSL wireless internet still works! The Network also doesn't recognize the Express connecting AirTunes either!
Going into the utility, a scan for local AirPort Base Stations reveals NONE, not even the Extreme which is clearly transmitting my ADSL! How can this be???
The computer recognises the printer normally when connected via USB.

Are you sure that you are connected to your wireless network or are you perhaps connected to a neighbor's wireless network?

Airport Extreme issue connecting through usb to freeagent external hdd

I have a brand new 15"MacBook Pro and am using an Airport Extreme for wireless internet throughout my house. That part of the system seems to work fine. My problem is that I want to connect both my printer and FreeAgent hdd to be accesses through my wireless network. When I plug in a 4 port hub everything seems fine (green light). When I plug in the Free Agent hdd the light immediately turns to blinking amber. In airport utility the hdd does not show up but I get a message which says "disk needs repair". If I plug the hdd directly into my MacBook I can can see it, read from it and write to it fine. I can't find anything that indicates that the hdd wouldn't be compatible with the Airport Extreme. Help!

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

Airport Extreme loses connection to USB disk

Recently I upgraded my Airport extreme to 7.4.2 software. Since that time AE I keep losing connection to the disk when copying large files or after browsing on it for a while.
The drive is simply gone (no share advertised)
The only way to get it accessible again is by resetting the AE (soft reset via airport utility)
Is there a way to revert to the previous software (there appears to be no newer SW or fix at the moment)?
My config is as follows:
Airport Extreme 802.1n operating a 5GHz wireless N network, 1TB Seagate (Seagate FreeAgent 102D) external USB drive attached to it (formatted with MAC filesystem)
on the ethernet port is a linksys router acting as a Wireless G Accesspoint (for my wife's Windows laptop)

Toryn Farr wrote:
I've been having exactly the same problem. The Macs on my LAN will all continue to have Internet access. On any of them, the base station still shows up in a Finder window under "shared"... but if I click on it, it will think for a moment and then say "Connection Failed" where it normally says "Connected As: USER NAME". And then none of my computers can access the shared volumes until I reboot the router.
I'm having exactly this same problem.
Not sure where the problem comes from, but here is my environment:
Airport Express (older model) Version 6.3 as WDS remote
Airport Extreme (version 7.4.2) as WDS base station
Powerbook G4 (1.33 Ghz)
PowerMac G4 (Mirror Drive Door)
iTunes 9.0
I've had problems with my Hard Disk access from the Airport Extreme. I have Time Machine running automatically from two different machines to the same plugged in HD on the Airport Extreme. I get messages indicating that the backup can't be mounted. Once that occurs, I have to reboot the Airport.
Just like Toryn says, once you get Connection Failed, you must reboot the router.

Airport extreme printer connection

I have 2 macs and to pc's running XP connected with airport extreme. 2 hp printers also connected. the internet connection works fine for all. macs can print with no problem. the XP's are connected but the printers work sometimes and then do not work. I am able to get them re connected eventually but that is not a long term solution. Why do the printer connections keep fAILING???

Check out http://discussions.apple.com/message.jspa?messageID=8883084#8883084
It describes a Vista/AirPortExpress installation, but should be relevant to XP.

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

Printing from Windows XP via AirPort to printer connected via USB to iMac

Hello. I have an iMac (with Leopard, MacOS 10.5) and a Windows XP notebook, both connected to the internet wirelessly via an AirPort Express unit. Do you know if I could connect physically (via a USB cable) a regular laser printer to the iMac and be able to print wirelessly from the Windows XP notebook via AirPort?

It should work. Enable Printer Sharing via System Preferences -> Sharing. The Mac does need to be turned on.
P.S. Try to just post one thread on your question instead of crossposting over several forums.

Airport Extreme Bases Station serial number not recognized

I bought this today and tried to register it. Registration rejects my serial number. I checked carefully, both on the back of the base station and on the box, and I'm sure I got it right. Eventually it allowed me to register, but with the Part Number (MA073LL/A), not the serial number.
Does this matter? Can I still get support if I need it?

resetting has worked for months with no return of the problem.

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Devices not connecting through Airport extreme wired connection

Hi
I just got an Airport extreme to use as an extention of my existing network, and to plug some devices in so that they can connect to the internet for updates (Sony Blu-ray player, dish network receiver, slingbox)...
my wireless is from a linksys/cisco wireless router (4-port) wrt310n, that is connected to my cable modem. The airport is set and has the green light showing. The blu-ray player and dishnetwork receiver are plugged into two of the ports. The blu-ray player says it can't connect to the internet. The dish network receiver says it is connected, giving ip address/submask, etc.
If I take my macbook pro and turn off wireless and plug into the airport it will not connect to the internet.
What have I not done to allow wired connection to the airport extreme to connect to the net?
thanks
David

Thanks for the clarification of your setup.
Unfortunately, the bottom line here is that this is not going to work.
The ethernet ports on the Extreme will only be active if you configure the AirPort Extreme to "extend a wireless network". But, it can only "extend" a wireless network from another Apple router. It's not compatible for this purpose with your Cisco router or any other manufacturer's router.
If you are unable to connect the AirPort Extreme to your router using an ethernet cable, you might want to take a look at a pair of ethernet powerline adapters to accomplish the same task by using the wiring in your home to transmit the ethernet signal.
I should clarify that if you connect the Cisco and AirPort Extreme using ethernet, you would not use the "extend" setting on the AirPort Extreme. This is only used if the device is connecting to another Apple router.
Message was edited by: Bob Timmons

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

Airport Extreme printing problem w/ HP7 410 all-in-one

I just purchased a HP officejet 7410 all-in-one.
I can print using USB cable connected to printer.
However, I CANNOT print connecting the USB cable from printer to Airport Extreme and using Bonjour printing? The print job spools than just stops?
Any help would be appreciated....
macbook pro Mac OS X (10.4.8)

Hello HevnLgh,
Thank you for your input. I tried to follow your instructions but had trouble right from the start. I got to HP uninstaller and clicked continue but there was no printer listed. It just said "device" and uninstall was greyed out. I decided to just continue so I reset the printing system and repaired the disk permissions.
It took me a couple of tries to reinstall the printer from the Apple website because at first it couldn't find the device to add so I tried using the IP address on the next tab and that seemed to do something but it still wouldn't print. The printer was found after I went back and tried again and everything seemed to work this time (whew).
I tried the update procedure on the printer itself and it still can't connect with the server, but the original problem with the duplicate copy on shut down seems to have resolved itself.
The bottom line is my printer is working like it's supposed to (for now anyway) and I didn't get two copies of my printout so thank you again for your help. It's good to know I can go somewhere for help when I have a problem.

Sent wake-on-lan command will reset airport extreme internet connection?

hi,
I have a problem with my airport extreme.
1, My airport extreme is set always stay connected to internet. If I reboot my airport extreme, it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
2, if I sent a wol command to my NAS, airport extreme internet connection will be reset. it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
zhi

Derek-
Since I could not find an answer on the support site. I contacted Apple Support. Once I explained the symptoms the tech seemed to know exactly how to address my issue. I will explain what happened in hopes that it will assist you. It seems that the issue has to do with the type of wireless network security set up in the Airport Extreme that conflicted with the Vista notebook's wireless adapter.
The tech had me launch Airport Utility, log into the Airport and Click on the Wireless. First he had me change the Radio Channel Selection from Automatic to Manual and changed the 2.4 GHz channel to 9 (from default 11) and the 5 Ghz channel to 157. The wireless security was set to WPA/WPA2 and he had me change it to WEP (Transitional Security Network) and I entered a 13 character key.
This resolved the internet connection issue with the Vista laptop immediately, but now I cannot print to my wireless Lexmark printer. I have a support email to Lexmark. It seems that the Lexmark driver/software only lists WPA in the install dialog and does not include WEP. My guess is that this is the source of the problem.
I hope this helps.
-Eye

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

AEBS Airport Extreme Printer connected by USB not recognized

Similar Messages

Maybe you are looking for