AEBS and AExpress N ethernet bridge disconnects when I sleep MBP??

Hi all this is my first post but im a long time mac user having grown up in a mac house.
anyways im an it guy by profession and ive been working at this issue to no avail so I figured I might come on there and see if any of you have experienced this issue
the issue I get is that when I close/sleep my MBP it disconnects the Airport Express ethernet bridge clients
NETWORK Info
I run a small business from my home thus I have FiOS (yay 20/20) with a block of 13 static ips that i distribute via DHCP and MAC reservation to allow remote access to my network as well as keep things consistent.
I currently run cat6 from my FiOS ONT to my Airport Extreme Base Station, which i use on a strict N only in 5ghz range as my area is flooded with b/g networks but no n networks (yay again).
I recently acquired an N Airport Express to provide a wireless to ethernet bridge thus extending my network to my entertainment center (ps3 xbox etc)
(extra info: im using n here because i found that b/g limits my internet connection speeds to 7-9 mbps where as my connection is capable of 20. On my n speed network I can get my full bandwidth wirelessly, yes I know there is obviously some bandwidth and throughput loss by going wireless but not as much as a b/g network was giving me)
NETWORK SETTINGS
On my n network I distribute a range of IP addresses from my static block. I have tried a few different dhcp lease times which definitely improved my initial problem which seemed that it would log me out when the key rotated every 20 min. Currently ive bumped that up to 1 day (i know not as secure id like to set it back to 20min but it seems that when it rotates that it logs me out) and haven't had that specific issue revolving around key rotation again. ive tried the WDS, Extend a network and join a network options with no real difference in behavior when I shut my laptop and for example my GF is playing rock-band online she gets disconnected also worth noting that it seems there is an intermittent DNS issue on the express ie cant find time server even though at that time ethernet clients are able to connect and get dns response
Below is my log from my express base station when the disconnect occurs
Feb 05 06:23:29 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Feb 05 07:23:29 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Feb 05 08:23:29 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Feb 05 09:23:30 Severity:5 Clock synchronized to network time server time.apple.com (adjusted -1 seconds).
Feb 05 09:28:36 Severity:5 Joined BSS 00:1e:52:78:bc:48
Feb 05 09:28:36 Severity:5 Installed unicast CCMP key for authenticator ******:bc:48
Feb 05 10:24:05 Severity:3 No Address for NTP server time.apple.com.
Feb 05 11:24:35 Severity:3 No Address for NTP server time.apple.com.
Feb 05 12:25:05 Severity:3 No Address for NTP server time.apple.com.
Feb 05 13:25:35 Severity:3 No Address for NTP server time.apple.com.
Feb 05 14:26:05 Severity:3 No Address for NTP server time.apple.com.
Feb 05 15:26:35 Severity:3 No Address for NTP server time.apple.com.
Feb 05 15:44:34 Severity:5 Disconnected from network.
Feb 05 15:44:42 Severity:5 Joined BSS **********bc:48
Feb 05 15:44:42 Severity:5 Installed unicast CCMP key for authenticator ********bc:48
Feb 05 15:53:26 Severity:5 Connection accepted from [************:6baf%bridge0]:51073.
Feb 05 15:53:28 Severity:5 Connection accepted from [************:6baf%bridge0]:51075.
Feb 05 15:53:28 Severity:5 Connection accepted from [************6baf%bridge0]:51076.
Feb 05 16:09:13 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
and my log from my AEBS
Feb 05 09:09:08 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
Feb 05 09:28:37 Severity:5 Associated with station ******:91:07
Feb 05 09:28:37 Severity:5 Installed unicast CCMP key for supplicant **********:91:07
Feb 05 10:09:09 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
Feb 05 11:09:10 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted -1 seconds).
Feb 05 12:09:10 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
Feb 05 13:09:11 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted -1 seconds).
Feb 05 14:09:11 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
Feb 05 14:15:28 Severity:5 Associated with station ******:6b:af
Feb 05 14:15:28 Severity:5 Installed unicast CCMP key for supplicant ******6b:af
Feb 05 15:09:13 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted -2 seconds).
Feb 05 15:44:32 Severity:5 Disassociated with station ******6b:af
Feb 05 15:44:35 Severity:5 Rotated CCMP group key.
Feb 05 15:44:35 Severity:5 Deauthenticating with station ******cc:e5 (reserved 2).
Feb 05 15:44:35 Severity:5 Disassociated with station ******:cc:e5
Feb 05 15:44:35 Severity:5 Disassociated with station ******91:07
Feb 05 15:44:36 Severity:5 Rotated CCMP group key.
Feb 05 15:44:43 Severity:5 Associated with station ******:cc:e5
Feb 05 15:44:43 Severity:5 Installed unicast CCMP key for supplicant ******cc:e5
Feb 05 15:44:44 Severity:5 Associated with station ******91:07
Feb 05 15:44:44 Severity:5 Installed unicast CCMP key for supplicant ******91:07
Feb 05 15:53:01 Severity:5 Associated with station ******6b:af
Feb 05 15:53:01 Severity:5 Installed unicast CCMP key for supplicant ******:6b:af
Feb 05 15:53:15 Severity:5 Connection accepted from [******:6baf%bridge0]:51048.
Feb 05 15:53:16 Severity:5 Connection accepted from [******6baf%bridge0]:51049.
Feb 05 15:53:16 Severity:5 Connection accepted from [******:6baf%bridge0]:51050.
Feb 05 16:09:13 Severity:5 Clock synchronized to network time server time.nist.gov (adjusted +0 seconds).
THANKS FOR YOUR INPUT AND SUGGESTIONS

i decided to also add my log from the mbp (dont think it matters but its an early 2008 model mbp)
as you can see i put my computer to sleep at the exact same time that the airport express lost connection iI
2/5/09 3:44:31 PM kernel hibernate image path: /var/vm/sleepimage
2/5/09 3:44:31 PM kernel sizeof(IOHibernateImageHeader) == 512
2/5/09 3:44:31 PM kernel Opened file /var/vm/sleepimage, size 4294967296, partition base 0xc805000, maxio 400000
2/5/09 3:44:31 PM kernel hibernate image major 14, minor 2, blocksize 512, pollers 4
2/5/09 3:44:31 PM kernel hibernateallocpages flags 00000000, gobbling 0 pages
2/5/09 3:44:32 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=4 stateNumber=2
2/5/09 3:44:32 PM configd[36] AppleTalk shutdown
2/5/09 3:52:59 PM kernel /drv/ MacModule.cpp:266 powerStateWillChangeTo: found flag=kIOPMSleepCapability (4)
2/5/09 3:44:32 PM configd[36] AppleTalk shutdown complete
2/5/09 3:52:59 PM kernel AirPort: Link Down on en1
2/5/09 3:52:59 PM aosnotifyd[278] Stream:streamCallback - an error occurred on CFReadStream: Operation could not be completed. Socket is not connected
2/5/09 3:52:59 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=4 stateNumber=2
2/5/09 3:52:59 PM kernel /drv/ MacModule.cpp:266 powerStateDidChangeTo: found flag=kIOPMSleepCapability (4)
2/5/09 3:52:58 PM configd[36] setting hostname to "Comp.local"
2/5/09 3:44:34 PM kernel System SafeSleep
2/5/09 3:52:59 PM kernel hibernatepage_listsetall start
2/5/09 3:52:59 PM kernel hibernatepage_listsetall time: 180 ms
2/5/09 3:52:59 PM kernel pages 635428, wire 220619, act 232958, inact 31, zf 59, throt 1114, could discard act 55989 inact 111080 purgeable 13578
2/5/09 3:52:59 PM kernel hibernatepage_listsetall found pageCount 454781
2/5/09 3:52:59 PM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
2/5/09 3:52:59 PM kernel IOHibernatePollerOpen(0)
2/5/09 3:52:59 PM kernel writing 454552 pages
2/5/09 3:52:59 PM kernel image1Size 636423168
2/5/09 3:52:59 PM kernel all time: 21548 ms, comp time: 2872 ms, deco time: 0 ms,
2/5/09 3:52:59 PM kernel image 1120299008, uncompressed 1861844992 (454552), compressed 1116586684 (59%), sum1 5d386928, sum2 eeca85bd
2/5/09 3:52:59 PM kernel hibernatewriteimage done(0)
2/5/09 3:52:59 PM kernel sleep
2/5/09 3:52:59 PM kernel Wake reason = EC LID0
2/5/09 3:52:59 PM kernel System Wake

Similar Messages

PPPoE Still Disconnects When Computer Sleeps

With 10.9.2 and again with 10.9.3, PPPoE disconnects when computer sleeps. This didn't happen with OS 8.x, OS 9.x, OS X 10.2, 10.8.x, 10.9.0, or 10.9.1. System Preferences>Energy Saver is set for display and computer to sleep after about 12 minutes. I'd rather not set computer to never sleep. Please advise and correct for 10.9.4. Thank you.

I have the same issue. Also after wake-up connecting to PPPoE is a challenge, because it establishes only after 5-7 attemps (Authentication failed). I guess 10.9.3 update causes this.

Conecting AEBS and AExpress to a Verizon wireless router to extend network

I have Verizon Fios and with that I have the wireless router that Verizon provides. The signal is great as long as I am in my office. However, in other rooms in the house the performance is decreased significantly. Before having this router I was set up with an AEBS and the performance was great.
My question is, "how can I extend my network by linking the AEBS and/or the Express with the Verizon router?" I have to have their router so I would be using the AEBS or Express to boost the signal through my 2 story brick home.
Please help if you can...thanks

I'm not familiar with the Verizon FiOS-supplied routers, but you should be able to connect an AirPort Extreme Base Station to the FiOS router via Ethernet cable and create your own wireless network with all Apple devices set up in bridge mode.
Turn off the wireless network on the FiOS router, if possible. The idea is that all wireless clients will receive IP addresses from the FiOS router but will connect to it wirelessly via the Apple devices.

Network disconnect when in sleep mode

Hi all.
Since I've installed Mountain Lion, any time the computer goes into sleep mode, networking do the same: I cannot download files, when the computer wakeup I have to wait the reconnection before being able to use mail, safari or ather network stuff.
I did not find any option to set, telling the computer waht to do when in sleep mode.
WIth Lion and preceding OsX this was not an issue.
Is there anything I can do?
Thanks.
Federico.

Hi,
Yes, clear "Allow the computer to turn off this device to save power" in the properties of network adapter\Power management as mentioned in the link provided by arnavsharma, and check if the issue persists.
Yolanda Zhu
TechNet Community Support

Ethernet disconnects when imac sleeps

When i put my imac to sleep, it seems to disconnect from the ethernet that is plugged into the back.
When i wake it up and log it back in, any applications that was signed in, like lync messenger are logged out and it takes a good 10 seconds to be able to browse the internet.
I'd love to just put my display to sleep and not the computer itself, however I work in an office and need to be able to lock my machine when i walk away.
I use CMD ALT EJECT to put my imac to sleep. And i am using the latest OS.
Please help

Try the following suggestions:
http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC)
Require a password after waking your Mac
How to lock your screen in OS X
=============
And i am using the latest OS.
Which is Yosemite. According to your profile you show--> OS X Mavericks (10.9.1)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Disconnecting when computer sleeps- will not reconnect

My grandfathers MacBook disconnects from wireless network whenever the computer goes to sleep/is temporarily shut. When it is opened back up, says it is not connected to the internet even though the Network is reading as working. Mail will not send either. The only way I can get it back in gear is running the Network diagnostics or simply restarting the computer.
Please Help.
OH- "Disconnect from wireless network when logged out" is NOT checked in system preferences

Hello candace171. Welcome to the Apple Discussions!
If he's using Preferred Networks, try the following ...
1. Delete Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
o Launch the "Keychain Access" application located in Applications/Utilties.
o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
o Restart, or log out then back in.
3. Add Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Add the preferred network(s) using the "+" button.
o Restart or log out then back in.

Wifi disconnect when sleep or locked! useless iPhone!

apple is very good product, but if they are like this and told us that wifi disconnect when on sleep mode or even locked, that is totally ******* useless! im a diehard fans of apple, but if this like this tmie to switch to other smart phone, apple is *****!

really? mine is also iPhone 5 black 16 gb, when my phone is locked, i try to call it through viber but it does not notified, the viber is on on notification, wifi also turn on, i observe it, when phone is locked, then i immidiately click the home button, i think 0.5 sec wifi icon will appear,
it is not all about the internet cause my cousin is having iPhone 4, and he receives notification oh his apps during phone is lock, and i also observe, i will not turn off the wifi, but upon waking up in the morning my phone doesnt have wifi, when i go to settings then click wifi, the is notification Log in then it would say success www.apple.com,
this is very dissapointing, my phone is useless without being notified

Adobe bridge crashes when saving illustrator files

Hi there,
We are developing custom connector using Adobe Drive SDK for our DAM system, the integration with CS was working fine, we recently updated Adobe Drive to 4.2, and we are encountering bridge crashes when saving illustrator file. It didn't happen with older version(4.0.2) of Adobe Drive, not sure why. I pin point the part that causing the issue: in our custom connector, we have READ_XMP_METADATA capability which we need to display the thumbnails and previews, and in the ftp sample connector, this capablity is not included originally, so the issue does not happen, but if I add this capabilty, the crash issue happens as well. If we exclude this capablity from our connector, this crash issue doesn't happen.
We noticed this only happens when saving illustrator file, not photoshop or indesign, and it seems that only in illustrator, when save, and the bridge has the current file folder showing, we are seeing there are twice folder refreshes, and usually it will crash after the second time. In photoshop and indesign, we don't see folder refreshes. If switch to other folder, the crash won't happen. We tested on both windows and Mac, on Mac, this seems happen less often. Another thing we noticed is in debug mode, or we have many debug logging turned on, the crash happens less often, if it is deployed with no debug logging, the crash happens almost everytime. So we are guessing it might be some synchronization problem.
Could you please advice what's the cause of this issue?
Thanks,
Katherine

Has it ever worked?
What kind of files are they and where do you save them?
Is a printer connected, set up and turned ON?
Have you already tried resetting the preferences?
Generally it's not a good idea to just save old files, because then some artwork may be automatically flattened. Illustrator will save the file to the old version file-format and if you used new features in-between, those cannot stay live in the old version file format.

WLC ethernet bridge

Hi,
I've a WLC 2106 and it is running IOS version 7.0.240. I am trying to setup a wireless mesh and used the ethernet bridge port on the MAP to extend the network. The wireless mesh works fine but I can not get the switch to work that is connected to the ethernet port on the MAP.
I'm using two different Access points. I'm using a Air Cap 3502i as the RAP and a Air Lap1142N as the MAP.
The switch port that is connected to the RAP and MAP is configured as the following:
switchport mode trunk
switchport trunk native vlan 2
switchport trunk allowed vlan 10,20,30,40
The RAP etherbridge port is enable and set to: normal
The MAP etherbridge port is enable and set to: Trunk,
native vlan is set to: 2
Vlan id 10
Vlan id 20
The wireless mesh between the RAP and MAP works fine. I can connect a device to the MAP wirelessly and access the network with no problem but I can not get anything to work that connects to the switch that is connected to the MAP ethernet port.
Could someone please tell me what I'm doing wrong?
　

I would open a TAC case as this is a bug. I don't recall what code it stopped working but I know it doesn't work also in the v7.3 & v7.4
Sent from Cisco Technical Support iPhone App

BT Infinity Lag and Disconnections when another co...

Hello, I have had BT infinity since the 28th of January and love the new found speeds I now have. However whenever my sister uses the internet for Netflix and other on-demand streaming services my connection on both my laptop and more importantly my Xbox drops out and I get disconnected.
This to me shouldn't happen especially on an infinity line. I am on Unlimited Infinity 1 + Calls as the maximum speed for my line would be just over 40Mbps so going onto Infinity 2 would have been pointless.
Information on my home setup:
All devices are connected wirelessly - NOTE - I know that a wired connection would help but this is not possible due to distance between the router and my room. Also I think this is just a cop-out answer, it shouldn't just disconnect when another person uses it even on wireless.
There is a total of 4 devices that can connect at any one time but usually only three - The Xbox, My laptop and my sister's laptop.
The disconnections happen whenever my sister uses streaming services even at 2:00am like today which is what has brought me to this forum.
Any advice and answers would be greatly appreciated.

jonny3 wrote:
I don't think it is just my sister's laptop causing it I think its the fact she is using things like Netflix at the same time as me playing xbox. I had thought about those Powerline Adaptor's if thats what you mean by "homeplugs", but it would require me to put an long ethernet cable through the ceiling into the room above and do it from there as there would be no other way due to the location of my router.
Would that be okay?
Do these Powerline Adaptors give the same speed and reliability as a wired connection?
There is no need to install ethernet cable with homeplugs, as that's the point of them.
The major benefit of powerline networking is that users can easily establish a network using a home's existing electrical wiring as the communication medium. There is no need to drill holes in walls or ceilings to route new wiring and, as a result, installation is quick, easy and relatively inexpensive. Powerline networking is an easily accomplished networking method for AC-powered devices, which by necessity must already be near power outlets.

AEBS as Ethernet Bridge

This is what I want to do:
I have a Draytek 2600VGi ADSL router with the wireless enabled and a block of 16 static ip's.
I have a non-wireless but ethernet equipped machine (Sun E450) which I want to connect to the Draytek wirelessly with a static IP.
Can I set up the AEBS to act as a transparent bridge or adapter to the ethernet port of the E450 and make is 'pass' it's static IP to the AEBS which will appear to have that IP, and for the AEBS to join the wireless LAN created on the Draytek?
Ste

stek1961, Welcome to the discussion area!
Can I set up the AEBS to act as a transparent bridge or adapter to the ethernet port of the E450...
Not in coordination with the Draytek.
The only way to do this is if you are using Apple's WDS between AirPort Extreme base station (AEBS) and AirPort Express devices. See KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations.

Labview 2011 always disconnecting over wireless Ethernet bridge!

Hello, we recently upgraded from labview 2009 to labview 2011. We use a Labview cRio-9014 and FPGA backplane 9114. For connecting the cRio to our laptop we use Digi XPress Ethernet Bridge: Multipoint 900MHz industrial wireless part# XEB09. This program worked over our wireless link running labview 2009 with the old cRio software.
After upgrading the desktop, upgrading the cRio's software and recompiling the FPGA code we tested our setup via a wired ethernet connection and ran it all day with no problems. However once we switched to using our wireless ethernet bridges the cRio disconnects always 2-3 minutes after starting. It also does not allow us to reconnect without powercycling the cRio. The radio modems show a solid connect and no problems the whole time. Now I've searched through known issues and all over the forums without finding anyone having a similar issue so I hope someone can chime in and let me know if something else in LV2011 changed or what.
My current hypothesis is that labview 2011 uses UDP packets for status/keep-alive and our radio modems are not guaranteed to recieve all UDP packets. Please correct me since this is only a guess and I don't know what's going on under the hood on the cRio side.
P.S. I've captured the packet data using WireShark on the laptops side from deployment until disconnection but can't find any obvious problems. It's a fairly large file so let me know if it's needed and I'll try to find a way to upload it.
Hopefully someone can help.
Best Regards,
Sam Bingham
Great Lakes WATER Institute

Our host OS is WIn7-64Bit, and XP-32bit but they all display the same behavior.
cRIO hardware: cRio-9014 and FPGA backplane 9114
Our system is has 4 modules installed NI-9205, NI-9401, NI-9401, NI-9870, although we are only using the serial ports on NI-9870.
I looked for the NI TimeSync to remove but it isn't listed in our installation
Contents of current installation:
CompactRIO Support 4.0.0
DataSocket for LabVIEW Real-Time 4.9.0
HTTP Client 1.2.0
HTTP Client with SSL Support 1.2.0
I/O Variable Remote Configuration Web Service 1.0
LabVIEW 2011 Adaptive Filter Toolkit 11.0.0
LabVIEW PID and Fuzzy Logic Toolkit 11.0.0
LabVIEW Real-Time 11.0
Language Support for LabVIEW RT 1.0.0.4
NI Application Web Server 2.0
NI System Configuration 5.0.0
NI System Configuration Network Support 5.0.0
NI Web-based Configuration and Monitoring 2.0.0
NI-RIO 4.0.0
NI-Serial RT 3.8.0
NI-VISA 5.1
NI-VISA ENET Passport 5.1
NI-VISA ENET-ASRL Passport 5.1
NI-VISA Remote Passport 5.1
NI-VISA Server 5.1
NI-VISA USB Passport 5.1
Network Streams 1.1
Network Variable Engine 1.8.0
Remote Panel Server for LabVIEW RT 4.0.0
Run-Time Engine for Web Services 4.0.0
SSL Support for LabVIEW RT 4.0.0
System State Publisher 2.0.0
Variable Client Support for LabVIEW RT 1.8.0

HT1595 I have hooked up a second apple TV in another room and neither can see my computer when both connected. When i disconnect 1 box it works fine?

I have hooked up a second apple TV in another room and neither can see my computer when both connected. When i disconnect 1 box it works fine?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Bridge CC when copying resizes window to both monitors and enlarges all images to maximum size

Bridge CC when copying an image resizes window to both monitors and enlarges all images to maximum size.

Details, please.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

AEBS and AExpress N ethernet bridge disconnects when I sleep MBP??

Similar Messages

Maybe you are looking for