AEBS Connection Time Out - No Connection

OS 10.5.4 or 10.5.5 tried both:
Within the past couple of days my MacBook can no longer make a reliable connection to my AEBS. The MacBook sees about 8 other wireless networks in my neighborhood but at time, my AEBS is not even on the list of available networks. When it does appear, I can't connect it using the correct password. MacBook scans persistently, the number of networks change. I'd suspect my internal card but it's the AEBS that seems to be the most illusive for it find and hang onto. When I do connect, the transport rate is very sluggish and at times stalls out.
Clean install twice yesterday.

I appreciate the suggestions.
In some ways, the problem began with the installation of OS 10.5.0 some time ago. It cleared up in 10.5.1.
The base station has not changed in location for 4 years and no new wireless devices have been added in the house.
It's one of those intermittent problems that has worsened. Often my AEBS is not even on the list of available networks. I CAN see the networks of what is probably my nearest neighbors. That list is not always the same either.
When my AEBS shows up, I often cannot connect with it. When I do, transport is slow - if not non existent. Just now, I was able to both see it and connect. To see if I get transport, I'll have to send this message as I am in the "bridged" mode with a CAT5 cable running to the base station which is psychically connected to the hardwired router.
It's an issue between my Intel Macbook and the AEBS circa 2004. Older iBook hanging around - no problems in finding or connecting.
I've been traveling. Sometimes but not always logging into free WiFi at airports. This happened the same way last month after going across the US. Similar issue after returning from another cross country trip. I've deleted all but a couple of familiar networks. All the ones from airports are at least out of the list. If some public Wi-Fi drops a cookie on me and it takes some time to expire - my only guess.
On return, things seem fine for a day or two - then the problem occurs.

Similar Messages

HT4628 my powerbook g4 os x 10.5.8 leopard is showing-Connection time out while connecting to the wifi.however it showing all available wifi connections around but not connecting it..however ethernet is working

Problem while connecting with Wi-Fi,
When i am connecting my powerbook g4 leopard to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.

It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
One last thing to try before going with another Wi-Fi solutions is to the following:
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
3. Run the Disk Utility to repair Disk Permissions.
Restart or log out then back in.
4. Turn off the Mac OS X Firewall
System Preferences > Sharing > Firewall
Click the "Stop" button.
5. Create a New User Account
System Preferences > Accounts
Click "+" to add a new account
Log off, then log back on with the new user account.
Try connecting with the AirPort.
If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC).

Getting Connection Time out while connecting and with tnsping

Hello Experts,
I am new to Oracle world, so please go easy on me.
I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
I am able to login to database through sqlplus and able to run sql queries.
Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
Below are the tnsnames.ora and listener.ora file content
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
bash-4.1$ lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date                10-JUN-2013 19:39:03
Uptime                    0 days 6 hr. 21 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
bash-4.1$ tnsping xe
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
I am stuck and don't know where else to check.
Could you guys please help me out here?
Thanks.

That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
ifconfig -a
<interface>: flags=...
inet n.n.n.n
# in sqlnet.ora:
xe2 = ... host=n.n.n.n ...
tnsping xe2
... ok? ...

Network connection time out when connecting to Itunes store

When I try to connect to Itunes store i get this message:
"Itunes could not connect to iTuens sore network connection has times out Make sure your network connection is active and your network setting are correct"
Can some one walk me through or link me to a site or discussion so i can get this fixed

I had the same problem several days with the AppStore. Software-downloads did not proceed, i tryed everything, shut down firewalls, change the host-file, disable proxy-server - no success.
I have Kaspersky-Suite as firewall and anti-virus-software.
Accidentially I find a solution:
- select in iTunes at downloads "Proceed" of a download-entry . iTunes then connect with the server, so it is enough time to:
- right-click on the windows-tray-symbol of Kaspersky and select "stop service" (something like that, i work with the german version).
Now, surprise, the download proceed and starts working again. In case the download is freezing again:
- Reactivea Kaspersky-service with right-click as described above, then deactive the serve again as i described.
Seems this "Workaround" opens a door to an network-connection Kaspersky usually block by itself.
Shutdown the firewall and finishing the Firewall-Software is a good idea, but you never know, which process is running in the background despite you shutdown everything possible...
Hope the "solution" is working for you!

Connection time out issue with wep security

Does anyone know what is causing connection time out when connecting to WEP network.
Password is correct.
$ and x0 in front don't work.
A solution would be great.
Thanks

Hello freestyleadamski. Welcome to the Apple Discussions!
o The MacBooks back until late 2006 can handle 802.11n/a/b/g
o The late 2006 MacBooks will require the "n"-enabler to support the same.
o The mid-2006 MacBooks will only support 802.11b/g
o The iPod Touch will only support 802.11b/g
Which radio mode should I be using so I can connect my macbooks (I have one and my wife, hers is slightly older) and our ipod touch?
In order of most to least recommended: 802.11n (802.11b/g compatible), 802.11g only, 802.11b/g compatible, & 802.11b only.

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

ITunes wont connect to iStore - network connection time out message

Been trying to connect to iTunes since I downloaded the newest version onto my new laptop this morning. But without success.
Run diagnostics as follows. Can anyone help? Thanks
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
Dell Inc. Inspiron 1545
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.0.31
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 06303A390F254549
Current user is not an administrator.
The current local date and time is 2009-06-03 13:44:56.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {6CB7CABB-B89E-4874-8225-C44D995C9A7A}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.2.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Wed Jun 03 08:51:06 2009
Lease Expires: Wed Jun 03 08:51:05 2009
DNS Servers: 192.168.2.1
192.168.2.1
Adapter Name: {1FAEDA91-E6CB-4732-97D7-A60F6CE53A02}
Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
iTunes has never successfully accessed iTunes store.

After an upgrade, that profile is commonly du to firewall blocking.
Do you have any other firewalls even if you are not using them?
Have you ever had Norton even if you have uninstalled it? Norton is commonly preloaded on new PCs.
An old Norton can block iTunes if it has been uninstalled.
Are you using an administrator account? iTunes doesn't seem to think you are. It should not be a problem running from a limited user account. That is what I do except when I am installing programs.
Normally TLS 1.0 would be enabled, but I don't think this is the cause of the problem. It can be enabled from Internet Options>>Advanced tab.

Message Mapping - connection time out

Hi ,
I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
What could be wrong ? Mapping involves an XML to IDOC .
Cheers,

Hello,
I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
or
b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
or
c.) Test at runtime
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM

Ping time out, server connection is lost in visual administrator after java

Dear all,
Recently I have done system copy for XI system. I have imported the java import after importing the abap stack into the target system as java add in abap.The import phase finished successfully and java engine is also working well.
I have confirmed this by moving to the browser page " http://hostname:50000/ and XI system http://hostname:50000/rep ". Everything is working fine and in MMC console as well.
But while trying to log in to visual administrator i am getting the error message as " ping time out,connection to server is lost "
std_serverout.log
unrecoverable stack overflow has occurred.
An unexpected error has been detected by HotSpot Virtual Machine:
EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x00000000080e3c66, pid=2940, tid=928
Java VM: Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode)
Problematic frame:
V [jvm.dll+0xe3c66]
An error report file with more information is saved as hs_err_pid2940.log
stdout/stderr redirect
node name   : server0
pid         : 3060
system name : XIT
system nr. : 03
started at : Tue Feb 17 18:42:50 2009
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is starting...
Loading: LogManager ... 453 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 219 ms.
Loading: LockingManager ... 93 ms.
Loading: ConfigurationManager ... 1502 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
6.226: [GC 6.226: [ParNew: 87040K->8544K(130560K), 0.0628724 secs] 87040K->8544K(1005056K), 0.0629982 secs]
Loading services.:
Service memory started. (16 ms).
Service cross started. (15 ms).
Service file started. (78 ms).
Service timeout started. (32 ms).
Service runtimeinfo started. (15 ms).
Service userstore started. (63 ms).
Service trex.service started. (94 ms).
Service jmx_notification started. (63 ms).
Service p4 started. (235 ms).
Service classpath_resolver started. (15 ms).
10.537: [GC 10.537: [ParNew: 95584K->16246K(130560K), 0.0776272 secs] 95584K->16246K(1005056K), 0.0777727 secs]
Service deploy started. (3926 ms).
Service log_configurator started. (4363 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (203 ms).
Service failover started. (78 ms).
Service appclient started. (110 ms).
Service javamail started. (140 ms).
Service jmsconnector started. (140 ms).
Service ts started. (125 ms).
Service licensing started. (16 ms).
Service connector started. (188 ms).
Service configuration started. (31 ms).
service MobileSetupGeneration ================= ERROR =================
Service MobileArchiveContainer started. (78 ms).
Service webservices started. (470 ms).
Service dbpool started. (1172 ms).
13.195: [GC 13.196: [ParNew: 103286K->20423K(130560K), 0.0478316 secs] 103286K->20423K(1005056K), 0.0489244 secs]
Service com.sap.security.core.ume.service started. (2596 ms).
Service security started. (2471 ms).
Service classload started. (78 ms).
Service applocking started. (141 ms).
Service shell started. (188 ms).
Service tceCATTPingservice started. (32 ms).
Service telnet started. (63 ms).
18.218: [GC 18.218: [ParNew: 107463K->25937K(130560K), 0.0545612 secs] 107463K->25937K(1005056K), 0.0546428 secs]
Service webdynpro started. (203 ms).
Service ejb started. (532 ms).
Service dsr started. (172 ms).
Service keystore started. (485 ms).
Service ssl started. (16 ms).
Service servlet_jsp started. (704 ms).
Service tcsecsecurestorage~service started. (63 ms).
Service jmx started. (391 ms).
Service tclmctcculculservice_sda started. (0 ms).
Service rfcengine started. (656 ms).
Service tcsecwssec~service started. (469 ms).
Service apptracing started. (360 ms).
19.355: [GC 19.355: [ParNew: 112977K->42681K(130560K), 0.0844669 secs] 112977K->47563K(1005056K), 0.0845476 secs]
Service tcsecdestinations~service started. (907 ms).
Service basicadmin started. (860 ms).
Service adminadapter started. (297 ms).
Service pmi started. (312 ms).
Service tclmctcculservice_sda started. (1251 ms).
Service tcsecvsi~service started. (438 ms).
Service monitor started. (407 ms).
Service sld started. (1721 ms).
20.296: [GC 20.296: [ParNew: 129721K->39952K(130560K), 0.1028212 secs] 134603K->50894K(1005056K), 0.1028881 secs]
Service tc.monitoring.logviewer started. (1704 ms).
21.584: [GC 21.584: [ParNew: 126992K->40823K(130560K), 0.0664458 secs] 137934K->58110K(1005056K), 0.0665026 secs]
Service jms_provider started. (3518 ms).
Service com.sap.aii.af.cpa.svc started. (2033 ms).
Service com.sap.aii.af.security.service started. (16 ms).
Service com.sap.aii.af.svc started. (157 ms).
22.873: [GC 22.873: [ParNew: 127863K->43238K(130560K), 0.0574693 secs] 145150K->65266K(1005056K), 0.0575210 secs]
Service com.sap.aii.af.ms.svc started. (407 ms).
Service com.sap.aii.adapter.marketplace.svc started. (47 ms).
Service com.sap.aii.adapter.bc.svc started. (47 ms).
Service com.sap.aii.adapter.xi.svc started. (47 ms).
Service com.sap.aii.adapter.jms.svc started. (79 ms).
Service com.sap.aii.adapter.mail.svc started. (63 ms).
Service com.sap.aii.adapter.jdbc.svc started. (156 ms).
Service com.sap.aii.adapter.rfc.svc started. (219 ms).
Service com.sap.aii.af.ispeak.svc started. (313 ms).
Service com.sap.aii.adapter.file.svc started. (2315 ms).
ServiceManager started for 22082 ms.
Framework started for 24772 ms.
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is running!
PatchLevel 100627.313 December 14, 2005 20:06 GMT
>26.086: [GC 26.086: [ParNew: 130278K->23111K(130560K), 0.0693509 secs] 152306K->68371K(1005056K), 0.0694372 secs]
32.059: [GC 32.059: [ParNew: 110151K->34716K(130560K), 0.0419854 secs] 155411K->79975K(1005056K), 0.0420301 secs]
32.608: [GC 32.608: [ParNew: 121756K->43497K(130560K), 0.0827214 secs] 167015K->105659K(1005056K), 0.0827638 secs]
38.688: [GC 38.688: [ParNew: 130537K->39986K(130560K), 0.0525517 secs] 192699K->106409K(1005056K), 0.0526114 secs]
41.615: [GC 41.615: [ParNew: 127026K->32598K(130560K), 0.0467433 secs] 193449K->103188K(1005056K), 0.0467930 secs]
44.298: [GC 44.298: [ParNew: 119638K->34820K(130560K), 0.0430069 secs] 190228K->105410K(1005056K), 0.0432422 secs]
46.443: [GC 46.443: [ParNew: 121860K->39729K(130560K), 0.0498349 secs] 192450K->110319K(1005056K), 0.0499023 secs]
48.656: [GC 48.656: [ParNew: 126769K->36669K(130560K), 0.0625983 secs] 197359K->112667K(1005056K), 0.0626567 secs]
52.243: [GC 52.243: [ParNew: 123709K->39589K(130560K), 0.0477260 secs] 199707K->115587K(1005056K), 0.0477793 secs]
115.241: [GC 115.241: [ParNew: 126629K->37429K(130560K), 0.0553704 secs] 202627K->118544K(1005056K), 0.0554346 secs]
118.096: [GC 118.096: [ParNew: 124469K->40865K(130560K), 0.0504829 secs] 205584K->121980K(1005056K), 0.0505322 secs]
120.589: [GC 120.589: [ParNew: 127905K->37247K(130560K), 0.0578313 secs] 209020K->123954K(1005056K), 0.0578734 secs]
122.573: [GC 122.573: [ParNew: 124287K->39626K(130560K), 0.0534208 secs] 210994K->126333K(1005056K), 0.0534640 secs]
124.070: [GC 124.077: [ParNew: 126666K->35377K(130560K), 0.0626490 secs] 213373K->128235K(1005056K), 0.0627628 secs]
126.103: [GC 126.103: [ParNew: 122417K->37886K(130560K), 0.0485833 secs] 215275K->130744K(1005056K), 0.0486433 secs]
128.251: [GC 128.251: [ParNew: 124926K->41258K(130560K), 0.0482213 secs] 217784K->134115K(1005056K), 0.0482675 secs]
130.792: [GC 130.792: [ParNew:
Due to this i am not able to log in visual adminsitrator.Kindly advice me for the same.
Thanks in advance
Vijay

Hello vamshi,
As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-Djava.awt.headless=true
-XX:SoftRefLRUPolicyMSPerMB=1
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Xss2m
-Xms2048M
-Xmx2048M
-XX:MaxNewSize=320M
-XX:NewSize=320M
-XX:MaxPermSize=512M
-XX:PermSize=512M
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:+UseParNewGC
-XX:+UseTLAB
-XX:+HeapDumpOnCtrlBreak
The heap size for java is 2048
But still i am getting the ping time out. Connection to server is lost.
Kindly let me know,
Regards
Vijay

Connection time out error in server proxy

Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
Divia

To increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found.

Connection time out error in HTTP

Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmad

Also, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin

Connection time out

Hello everyone,
I'm using modem PK5000 from Century Link. My other two desktops are using Window and in the same room w my modem.
I got connection time out every time my computer started playing the screen saver.
All I have to do is restarting my modem but it's so unconvinience.
I called Century Link customer service and all they told me is changing the channel but it didn't solve the problem.
At school and other people's places, my wifi works just fine.
I used cleanmymac about a month ago and this problem started a week ago.
Can cleanmymac cause the problem? If so, how can I check and fix it?
I check the apple store to update my software but everything is up to date.
Can it be the firmware of my modem? My brother who uses the two desktops (and they connect to the modem with LAN cables) upgraded firmware last week and it seems like when the problem started.
And when my Mac loses the wifi signal, my printer still has the signal, but my desktop cannot log-in to page 192.168.0.1 which manages the modem and wifi even though the desktop connects w my modem by LAN cable and it still connects to the internet.
If you have any clue, please help!
Thank you so much!

Thanks Todd, Wayne,
this network timeout sure seems to be the guilty one!
I've changed it, lets see if it's fixed but sure looks like it.
The thing is that I was looking for GWWS tuning here :
http://edocs.bea.com/salt/docs20/ref/comref.html#wp1117652
but should have looked here
http://edocs.bea.com/salt/docs20/admin/config.html#wp1056667
Thanks,
Gary

Connection time out error

Hello sir,
Whenever i install addon on SAP B1 i get connection time out error can anyone help me

Manish,
it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
then change it to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
and give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
regards,
Binita

Connection time-out issues each first try of pacman

Hi,
I am new to arch. I keep getting a connection time-out each time I use pacman for the first time. I have to do a ctrl+z to stop the command and then delete the db.lck file and then when I run pacman again, any operation on pacman that I had tried works flawlessly.
Do I need to do something to fix this? I check there was a similar thread in 2012, but it ended without any results.
Cheers,
Prashanth

geekoo wrote:@WonderWoofy: The second time on it works with the same mirrors. I am using the Indian http mirror at the top of the list. US mirror follows. When it fails, it takes a sweet 30 odd minutes to run through all of the mirrors and fails.
I'm pretty sure you can disable all the mirrors you don't want to use, try lowering the list to only those in Asia to minize your waiting time atleast. I get a time-out occasionally on the first run, but running anything inside China's GFW is a roll of the dice.

"connection time-out occurred" when my mac goes to sleep.

When My macbook goes to sleep I get a "connection time-out occurred" when I try to connect to the internet. and I have to restart my mac and restart the router. The is always a BT hotspot page displayed on the screen.
I have a 2011 macbook pro. This happens on my son's as well. he has the same model. he recently got a new retina display macbook and there hasn't been any problems. this doesn't happen on our phones either.
-Thanks for any help

I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck

AEBS Connection Time Out - No Connection

Similar Messages

Maybe you are looking for