AEBS does not recognize Ethernet connected PC

I have successfully replaced my DLink wireless router with the AirPort Extreme. I have 2 wireless connections to Macs and two Ethernet connections to two other Macs. A PC is attached by Ethernet to the AEBS but it will not connect to the internet through the AEBS. It worked fine on the DLink. What suggestions do you have for me? Thanks in advance.
Slater.

figured it out myself. Darn complicated PCs.

Similar Messages

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

Ovi Suite/PC Suite does not recognize the connecte...

Error message: "Ovi Suite/PC Suite does not recognize the connected phone.Ovi Suite/Pc Suite cannot read the required information from the phone.Check that the connected phone is supported by Ovi Suite/PC Suite".
You can try this which can solve your problem.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

@ Omarbooyaka,
Welcome to the forum! You should use Nokia Suite to update your device to Belle. If still the same, please go to control panel > printer and devices > right click the phone icon > remove the device. Then try to connet again. Also try all the steps provided by magovoru. Could you also report the issue here if connection still does not work.
Hope this helps!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

My N8 does not recognize or connect to unsecured w...

My N8 does not recognize or connect to unsecured wifi network. I don't know why but even my old N82 picks up unsecured wifi networks without a problem.
Does anyone know why? I need help please.

I cehcked both settings and none picks up unsecured wifi. It only picks up 2 or 3 wifi networks in a range of about 14 wifi networks.
Tekky wrote:
cjlim wrote:
There is no reason why your N8 won't connect to unsecured wifi. I do all the time with mine.
Have you actually tested it out with an unsecured access point where your N82 sees it but not the N8.
The only setting I can think of that could possibly cause this is Settings>Connectivity>Settings>Switch to WLAN, if you set this to Known Wlan's only, you need to first add this wifi as a new access point before you can use it with most apps.
Yes, I have tested it with my N82 and my laptop also. Both the N82 and the laptop pick up the unsecured wifi network but not the N8. I checked the settings and even called for tech support but they couldn't even help me. I was told that I they are going to look into it. I might have to have to send the phone in for a replacement.

Nokia Updater does not recognize N91 connected via...

My fone has gone loco on me of late.. freezes about 3ce a day, and after deleting EVERY thing on my phone memory without any improvements, i decided to get an update on the software. problem is, the new updater 1.02.03 or sumn.. does not recognize that my phone is connected, even though the new pc suite does when i try it out.. what could i be doing wrong? (yes, i checked, there is an update for the code my phone carries) thanks for the help (i hope i get..)

Hi,
I faced this problem, make sure you have the latest updater and the PC suite installed. The best would be to remove both from your computer and fresh download and install.
Once you have installed it on the PC, now connect the phone (a PC suite is also installed on ur phone during the PC suite installation on the computer). I STRONGLY RECOMMEND THAT YOU USE THE CABLE THAT CAME WITH UR PHONE.
Select PC suite from the phone.
Start the updater as it is starting, u will see the prompt "Phone Disconnected from the PC suite" on your computer.
Now it should (ideally) start the process.
Cheers
NOTE: YOU WILL LOSE ALL DATA.. and FW should be 2.10.xxx (as i think this is the lates one yet)
Cheers
Nokia 8800e-1 (ARTE), V 05.21, 30-11-2007, RM-233
Phones used: Nokia 3600, 6110, 6600, 8210, 8910i, 9500, N70, N91, 8800 SIROCCO
Sony Erricsson: K900, T610
Motorola, V3, L7

Desktop Manager does not recognize USB Connection

I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'. I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
file:///Users/Nigel/Desktop/WaitingForUSB.jpg

I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8. It recently stopped recognizing the USB connection as well. I was able to sync my BB with the MAC but can no longer do so. The MAC mounts the BB and I can access the SD card. What gives here?

WRT150N v1.1 does not recognize internet connection

I have had this router stored since I have never been able to get it working, but today I want to try everything possible, and I have, i upgraded the firmware, i backed up the the configurations, restored the configurations, i power cycled, everything that those pages from linksys support show you, but still easylink advisor does not recognize my internet connection, i am obviously online since i am on this page, so I don't know what it is.
Solved!
Go to Solution.

There is nothing wrong with your router, you should Update Linksys Easylink Advisor

MacBook Pro does not recognize Ethernet cable or connect to wireless

Today when I turned on my computer, it suddenly would not recognize any kind of Internet connection. The Ethernet cable that I use every day now shows up as 'unplugged' even though it is plugged in. I have tried using a different cable, and it still shows up as unplugged. When I try to connect to the Internet wirelessly, there is always a connection timeout and I can't connect. I use a self-assigned IP address and I've never had this problem before. I've also reset my PRAM, but it hasn't helped. Any suggestions?

try suggestion by "KYLEWONT". If you are still unable to connect to internet then issue is either with n/w settings on comp or h/w. You can drag & drop systemconfig folder in MacHD/Library to desktop which contains all settings for network. Restart comp & that should fix problem related to s/w.

Disk Utility does not recognize ethernet external drive

I recently purchased a lacie ethernet external drive 1.5Tb to use with time machine and need to partition it. I mount the drive and open up disk utility, but it does not show up there. Any suggestions?

You cannot partition and format a drive over the network. You will need to connect the drives directly to your computer first in order to partition and format them (unless that's already been done at the factory.) Read the documentation that came with them product or contact LaCie's tech support.

Computer Does Not Recognize Ethernet at All

I directly connect to the internet on my MacBook using an ethernet cord. For the past two weeks, the computer hasn't recognized it, including when I run Network Diagnostics. We have still been able to connect to the internet on our PlayStation 3 using all the same tools (modem, cords everything), so I know for sure that the problem is not the internet service provider, or the cords or modems themselves. I have read other forums about internet problems but none of the solutions has fixed my problem yet. Even Apple Care is having a hard time helping me fix this.
Does anyone have any ideas?
Thank you!

Hi,
Please try:
(a) Click network connection (icon at the bottom right corner),
(b) Click "Local Area Connection"
(c) Click Properties
(d) Click Configure
(e) Click Advanced
(f) Under Link Speed & Duplex select Auto Negitiation
(g) Click OK, Apply ....
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Aperture does not recognize Internet connection with SmugMug

When I try to add an account for SmugMug, the Accounts dialog box shows, "Your computer is not connected to the Internet. Aperture needs an Internet connection to login to SmugMug."
I added a Flickr account with no problems. How can I get Aperture to recognize that I have an Internet connection for SmugMug?

jscorbin wrote:
** Workaround **
The problem appears to be with some routers in the network -- for example my Netgear R6300. When I hooked my iMac (running Mavericks) directly to the cable modem with an Ethernet cable, Aperture was able to authenticate with the SmugMug service (using Safari). The Apple Professional Applications technician suggested trying that, and it worked.
After replacing the original network configuration, where the iMac is connected through the Netgear router, Aperture maintained the SmugMug shared service, and I was able to upload and download photos with SmugMug.
Confirmed that this insane workaround did work. ***, Apple and/or SmugMug? This should be fixed. It doesn't jive with Apple's "ease of use" software mantras.
BTW -- I have a Netgear WNDR4500 v1 in between the world and my Mac.
IronChefMoto
Message was edited by: IronChefMoto

Airport Express does not allow ethernet connection to internet

I use my Airport Express to stream music to my speakers from iTunes, but I find that I cannot access the Internet via the ethernet modem connection. What is the deal?

Hello Stonegroove. Welcome to the Apple Discussions!
In order to use the Ethernet port on the AirPort Express Base Station (AX) to access the Internet, the AX would have to be configured as part of a Wireless Distribution System (WDS).

Does not recognize Internet connection for 1.2.1 update

After updating iTunes to 7.0.2, information tells me there is an iPod update 1.2.1. After I hit either "download and install" or "download only" it informas the of error:
iTunes could not contact the iPod software update server because you are not connected to the internet. Make sure you are connected to the internet"
I am connected! what is the deal?

http://docs.info.apple.com/article.html?artnum=304468

HP8570W with HP230W enhanced docking station does not recognize DMI connections

Hi,
I have an HP 8570W workstation with the HP230W enhanced docking station. I have three monitors plugged in - one VGA, and two DMI. Everything has been working for about a year. Suddenly today the desktop started jumping around and then the DMI monitors went dark. I checked in resolution and they do not show up anymore. I rebooted. I took laptop off docking station and retarted and plugged back in. I unplugged and replugged the DMI cable. Nothing helped.
Any idea what to try next?
Thanks,
SamBilbrey

Hi SamBilbrey,
Your Elitebook 8570w is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Initial sync between Desktop Manager and 8320 does not recognize internet connection

Am unable to do an initial sync between Desktop Manager and BB Curve 8320. Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again. Tried with version 4.3 and 4.6.0.12. I have a broadband connection that is always on and have also tried wirelessly. Any suggestions are appreciated.

Hi,
First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
After you are down download DM 4.5 with NO MEDIA MANAGER from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Just for trouble shooting purpose, turn off firewall and virus checkers,
Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

AEBS does not recognize Ethernet connected PC

Similar Messages

Maybe you are looking for