AEBS Port configuration for Bittorrent in Windows XP

So I've been using my AirPort Extreme Base station for a while now, and am really enjoying it. I have a Windows XP PC hooked up to it via a LAN and am using a MacBook Pro to connect to the internet wirelessly through the AEBS. I'd like to start using Bittorrent on my PC but, since it goes through the AEBS there are firewall issues and I need some information as to how to configure the ports on the AEBS to allow Bt through my firewall. Anyone have any suggestions? Thanks,
Scott
Desktop PC   Windows XP  

Scott,
You need to set up something called Port Forwarding, Port Mapping, as it's called in the AirPort Admin Utility.
Fire up the AAU (in Applications/Utilities) on the MacBook Pro, select the AEBS, click Configure and click the Port Mapping tab. Then you need to Add a configuration, specifying the public port (BT default is 6881, but you can specify something different in your BT client), an IP address to forward it to (the IP address of your XP box), and a private port, using the same as for the public port is a good idea as your BT client will publish this and listen on this port.

Similar Messages

  • Switch port configuration for 3500i AP

    Hi,
    We are due to install a brand new enterprise WLAN based on the WiSM2 platform, 3502i AP and WCS. The APs will be plugged into the 2960S-24TPS-L.
    I have scanned over all documentation and cannot for the life of me find a recommended switch port configuration for connecting the AP to the switch in terms of speed / duplex etc. For example, should I just configure the port to auto detect, or is forcing the speed / duplex the way to go. I could also do with knowing other best practice configurations for AP connectivity.
    Any help would be greatly appreciated.
    Chris.

    The AP comes online with just auto detect, but I want to know if there are any benefits to forcing this to 1Gbps / Full duplex, or even if this is the right way to go. I suspect auto detect is the best method.

  • While installation, Apache listener configuration for 9ias at window screen

    Hi,
    I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
    While installing 9IAS Minimal edition , the problem i get is that
    apache listener configuration for 9ias at windows screen doesnt splashes..
    However , complete successfully message coming ...
    But there is no Http Server or any 9ias product installed actually
    What is wrong here ?
    thanks in advance
    Regards,
    Defne

    Hi,
    I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
    While installing 9IAS Minimal edition , the problem i get is that
    apache listener configuration for 9ias at windows screen doesnt splashes..
    However , complete successfully message coming ...
    But there is no Http Server or any 9ias product installed actually
    What is wrong here ?
    thanks in advance
    Regards,
    Defne

  • Dynamic port configured for FILE adapter is not working

    Hi,
    I have a simple dynamic port in an orchestration that writes a file to a file location. Here is the configuration
    ================
    FilePort(Microsoft.XLANGs.BaseTypes.Address) = "FILE://c:\\TestFolder\\Out";
    FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "FILE";
    ================
    When I run this orchestration, the dynamic port does not write the file to the folder, however I does not show any error either. It is always in "Ready to Run" state where the message is "Queued Awaiting".
    I tried all sorts of combinations like FILE:// FILE:\\ File: file:// file:\\ etc... and also without the moniker, just c:\.... I get the same problem.
    when I use a static port(subscribed to the same message) it works fine. When I use a static port ALONGWITH this dynamic port then both works fine !!! I receive 2 files.
    but when I use only dynamic port it does not work!!
    Anybody knows how to solve it.
    THANKS IN AVANCE
    PLEASE HELP
    Surya

    It could be becasue you 're not passing in the file name, Try something like this..
    SndPort_Dynamic(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\Test1.xml";
    But even when you don't pass the file name, i was expecting the erro to be like:
    The FILE send adapter cannot open file C:\TestFolder\Out\ for writing.
    Details: The system cannot find the path specified.
    But try with File Name and restart the host instance after the change.
    Or use somehting like this:
    FilePort(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\\%MessageID%.xml";
    FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "File";
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Alternative VIs for In Port.vi and Out Port.vi for 64 bit Windows 7 platform

    Hi Need to use the printer port for my application. In Port and Out Port VIs was the simplest option in 32 bit Windows XP machine. Now I hear In Port and Out Port VIs are not supported in 64 bit Windows ( VISTA/7) machine. Is there any working alternative to In/Out Port.vi ??
    Thanks in Advance
    RKB
    Solved!
    Go to Solution.

    VISA can easily be used to solve your problem. If using a USB -> Serial adapter it's almost too easy.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • Advice about FXS Port configuration for connecting to modems

    Hello all,
    We have not confirm the problem, but we are having reports that analog devices like USR V.92 Modems and Power meters are not connecting or dropping the connection.  We have an ISR 2911 with the 4-port FXS-DID WIC (VIC3-4FXS/DID), configure to an internet SIP truck provider.  The Router is running IOS 15.3(3)M2.  If we connect an analog phone to the FXS port and call, voice is clear.  So the question is what configuration settings should we have for FXS ports and/or dialpeers for connections to modems?  Attached is the current configuration of the router.  
    Do we have to be worried about Codec?  If so which Codec should we configure?
    Any Physical FXS settings should be set?
    Are my DSP setup correctly?  
    Again, I'm at a loss, as voice sounds good and my searches for modem connections to FXS Ports on CUCME is coming up dry.  Any help would be great.  
    As far as the "Power Meters", we are talking substation power meters.  
    Thanks for any advice you can spare and your time,
    Nick

    Hi Amit,
    No problem on the delay.  Your help is very much appreciated.  
    You're losing me a bit.  Because I don't know if your giving me dial-peer 1 as an example.  1 being just a random number.  Or your telling me to change my current dial-peer 1 configuration.  Which is currently a pots dial-peer:
    dial-peer voice 1 pots
    description POTS port 0/1/0
    destination-pattern 111111111
    port 0/1/0
    dial-peer 1000 voip is our outbound call leg.  Sorry call legs are not exactly clear to me yet.  In fact they haven't been in years.  :)  So change my dial-peer to dial-peer voice 1 voip?  
    My other question still unknown to me is should we use:
    fax protocol pass-through g711ulaw
    Even though we are trying to use a modem and not a fax?  Also this command is a dial-peer command and not a global command.  So what global command should i be using?
    Again thank you for your time and help,
    Nick

  • WRT54GSV4 port foward for bittorrent?

    hi, i have a WRT54GSV4 but am currently having problems fowarding ports in my router. even if i port fowarded the ports in "gaming and applications", it says closed on the utorrent reader. i dont quite understand about static ip thing. on the main page it says "automatically configuration DHCP" any help would be greatly appreciated
    Message Edited by KamikazeD on 12-16-2007 06:29 PM

    For a checklist see here.
    Otherwise, please post the exact settings you use on the router for port forwarding, triggering and DMZ at the moment. Also check the status page on the router and make sure the router has a public IP address and not an address like 192.168.*.* or similiar (see the "Make sure the router has a direct connection to the internet" in the checklist above).

  • Port configuration for OAS 10.1.3.4

    Hi Gurus,
       We have installed the Oracle Application Server 10.1.3.4 and deployed custom applications.  The Application server is listening on default port 7777 and we want to configure the port as 80 instead of 7777.  Can you please let me know the steps how to configure the port 80 with OAS 10.1.3.4?  The application server is installed on OEL 5.4 32 bit.
    Thanks
    Samar

    Why dont you try CentOs, this is a free Linux based on RedHat, is the same thing only that is free you can get it in the page of CentOs, I've used before and it works nicely well, and you dont have problems with updates or packages.
    Greetings.

  • Port configuration for servlet

    I am new to servlet. i am using tomcat 4.0 as a server. i need to run servlet on the server. do i need to have servlet server (JSDK 2.X) for that? n i came to know that servlet also works on port 8080 same as tomcat. can i change the port of a servlet? if yes then how?

    hi,
    if u r using tomcat as standalone for ur development u can change the port number. this variable can be changed in installed_dir/conf/server.xml.
    the element looks like this
    <Connector
    className="org.apache.c............"
    port="8080"
    ..../>
    change the port="whatevernumberuwant"
    but see that there is no process on that port before changing.

  • Port Configuration EDI/IDoc

    Please anybody can explain me in detail Port Configuration for EDI/IDoc(T Code WE21).
    please explain how can i create new port.
    it's urgent please.
    thanks
    RP

    rp
    check the following links
    http://help.sap.com/saphelp_47x200/helpdata/en/af/7e844367c24d4a950df3205052769d/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm

  • CATALYST 2820, console port config for modem

    Hi,
    I’m a 2nd semester CCNA student, and I purchased a old CATALYST 2820 switch for training purposes. I do not know the password and the console port has been configured for a modem. I thought that it would be easy to reset the password—but cannot find any way to do it with the 2820, and the console port configured for a modem.
    Does anyone know what the default factory password is? If the password has been changed (from the factory default), how can I reset the system?
    Thanks!

    I appreciate your help!
    I did look at that link several times—my 2820 has a mfg. date of Sept 97. I held in the Mode button, but the LED above port 1x does not come on (held it in for over a minute). I never see any info. using the console port.
    I did try attaching a modem to the console port—it works—I get a login prompt. I don’t know if it is the factory default password. I know that the rollover cable is working—tried a 827-4v.
    Am I doing something wrong???
    Thanks, David

  • How to recover from network port configuration deletion (airport)

    a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

    Thanks Rob,
    Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • Needs to be configured for Windows... but it already is!

    I just bought a brand new 80GB iPod Classic today. I hooked it up to my laptop's USB port, and the first time it showed up in my iTunes directory. Unfortunately iTunes informed that my iPod was corrupted, so I restored it. This happened TWICE.
    The third time I hooked it up, the iPod didn't show up in the directory, but a pop-box appeared telling me that the iPod needed to be configured for Windows, and would I like to configure now? I clicked yes, and nothing happened. Once I checked the iPod, I saw that the Version was 1.0.2. PC.
    Any ideas how to get my iPod up and running? Thanks in advance.
    iTunes version: 7.4.3.1.
    iPod version: 1.0.2. PC

    You need to connect your phone to iTunes on your COMPUTER, not on your phone.

  • AEBS (4g)  WD my passport work as NAS/FTP step by step configuration for novice in AirPort Utility Win Xp/iOS.

    AEBS (4g)  WD my passport work as NAS/FTP step by step configuration for novice in AirPort Utility Win Xp/iOS.
    First off all, is this possible to configure this to work over net? Next i need help in configurating ports, etc. I don't find solution in other topics. Sorry for my English!

Maybe you are looking for