AEBS/relay/remote flashes WDS Errors

I am trying to set up a remote connection from the office to the gym using 3 Airport Extreme Base Stations. I currently have all 3 in a room the main connected to the DSL modem, and the remote connected to the main via ethernet.
The problem is that the main keeps flashing WDS Errors, then goes back to a Normal status. The relay would flash, then the remote. I removed the relay, and the remote seems to keep it Normal status better even as the main changes to WDS Error - it shows an error it is just for a blink. WDS Error is "This Apple wireless device is set up as part of a WDS network but no other Apple wireless devices were found." When ever the main changes status it drops it wireless clients.
If I use the main in "Create wireless network" it seems to work fine.
Anyone know why this might be happening? Can I just click ignore it since the remote is Normal most of the time?
I have set up the network following Apples Designing AirPort networks guide available online http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf . I have entered the airport id in the proper place and set the WDS Mode to the proper mode for each device.
I have tried checking and unchecking the use interference robustness (makes no difference). I have checked and unchecked "Allow this network to be extended" and found there to be no difference. All three are set at Participate in a WDS network.
I have tried every channel and there is no difference.
Should the Wireless Mode on the relay/remote be Extend a wireless network? Should allow this network to be extended be checked or unchecked?
Any more ideas will be appreciated. Time to enjoy the 4th!

I have set on AEBS in the hall about 100 feet from the first. I am going though 2 steel framed drywalls and one block&brick wall. Still have about 1650kbps using iNetwork test. The problem has been getting into the gym. I can get from the hall through a glass window, courtyard, steel covered wooded door and into the kitchen. But the wall between the kitchen and gym is double thick with steel rods. I changed the location of the remote from the kitchen to the storage room, which houses the water heaters. The signal goes through the courtyard and a brick&block wall. The reading was about 400kbps and I am able to get through the wooden doors into the gym area with one bar showing on my Macbook.
I guess I will have to try something different.

Similar Messages

Cant extend range on TC or set up WDS relay/remote

I previously was running 3 x AE's (g) in a WDS configuration base, relay, remote to extend my network through my entire apartment. I was also using airtunes to stream music to 3 separate zones. It worked fantastic asides from having a slower internet connection speeds.
I recently just bought a TC 1TB and used it to replace the main base station in my wireless network. Setting it up wasnt a problem however, the range by itself wont cover my living space entirely. I tried setting up my (g) AE's as WDS clients as in my previous set up and it doesnt seem to work. I have clicked the tickbox on the TC to allow other clients to join. Once the AE updates I receive errors on the time capsule that says it cannot find other clients to join.
Is this possible to extend the network of my TC with older g AE's? Am i doing something wrong or is this simply a compatibility issue?
Can anyone offer some help?
Message was edited by: jatizado

Dear Akahan
Actually i was trying using the Quick VPN with the RV042 but i was using for the RV042 WAN Interface Virtual IP Address + Dynamic DNS Feature , but i failed to get the Quick VPN Client to establish a connection to the RV042 . I was wondering if you have any idea if the Quick VPN Client ( or any IPSEC VPN Client ) have an issue with using the DDNS Feature ?
Note : I tried to creat a PPTP Account over the RV042 and it worked with the DDNS with No Problems. Of course i did not use the Quick VPN Client , i used the Simple Windows XP VPN Connection and it was able to establish a Conenction to the RV042 ( I believe , Windows VPN Connection uses PPTP Not IPSEC ).
Regards
M.Tag

Remote and Relay in a WDS

What is the exact difference between remote a relay in a WDS. Also I don't really know what bridge mode is.
I have an airport extreme and want to increase the range with an airport express, what is the best way to do this?
Thanks for any help out there.

bogiegolfer, Welcome to the discussion area!
The best way is to connect the AirPort Express (AX) via Ethernet to one of the LAN ports on the AirPort Extreme base station (AEBS). Then you would configure the AX to act as a bridge (not distributing IP addresses). You would also configure the AX to use the same SSID, wireless encryption type/level/password, and a different channel (as far from the one used by the AEBS as possible).
A "remote" base station does not allow signals to be passed to another base station, only to wireless clients.
A "relay" base station can pass signals along wirelessly to another base station as well as wireless clients.
When a base station is operating in bridge mode it is not acting as a router. It is not handing out IP addresses and it is not doing DHCP.
Be aware that iIf you use WDS your wireless bandwidth will be cut in half.

Getting WDS Error

Hi, I've been having a problem with my wireless network the past couple of weeks. I have an AEBSn set up as a base station and an AEBSg and Airport Express set up as remote units in different parts of the house. This configuration worked great until about 2 weeks ago. Someone uplugged the Airport Express and after it was plugged back in I have been getting an amber flashing light indicating a WDS error on the AEBSn unit.
I look into Airport Utility and it sees all three units with the remote units coded green. At times, it seems to resolve itself and the status light goes green but after a few minutes it begins flashing amber again.
I'm getting a good signal throughout the house, it just is annoying to see the amber flashing light.
Thanks for any suggestions or hints.
Bob

There is no reason to suspect a "settings" problem here. My guess is that this error is being caused by an occasional drop in the wireless communication between the main and remote base stations.
For a start, you might try pulling power to all base stations, then plug the main base station into power and waiting for it to reboot, followed by both remote base stations. That might force the entire network to work on a different channel with a better connection than current.

Remote Flash no results

Problem:
I call a function "getContactInfo" in a CFC on the server
using Flash Remote, but I get no response back.
I don't get any error messages.
Platiform:
Fedora Linux
ColdFusion 8.01 Developer's Edition 32-bit
Design:
When a user selects an item in a "tree" the selected item's
data is sent to the server for a query.
The query is sent back to Browser to fill in a series of text
boxes.
Questions:
1) Is there any configuration in the ColdFusion Administrator
to enable Remote Flash?
2) Where should I be looking for a error messages?
(other than flash.log)
3) What am I doing wrong?
I have gone through the various tutorials on Flash Remote.
Code snippet:
<cfform name='MailingList' format="flash"
onload="formOnLoad()" >
<cfformitem type="script">
public function formOnLoad():Void{
setUpRemoting();
public function setUpRemoting():Void
<cfoutput>
var connection:mx.remoting.Connection =
mx.remoting.NetServices.createGatewayConnection("
http://#cgi.HTTP_HOST#/services/");
var componentPath:String = "services.Sample";
var listingService:mx.remoting.NetServiceProxy;
</cfoutput>
var responseHandler:Object = {};

var contactList:mx.controls.Tree = contactList;
responseHandler.onResult = function( results: Object ):Void
alert("Got Here");
responseHandler.create_Result = function( results: Object
):Void
alert("Got Here");
responseHandler.update_Result = function( results: Object
):Void
alert("Got Here");
responseHandler.remove_Result = function( results: Object
):Void
alert("Got Here");
responseHandler.onStatus = function( stat: Object ):Void
alert("Got Here");
MailingList.listingService =
connection.getService(componentPath, responseHandler );
public function listingTreeChanged():Void
var sSelected:String;
sSelected =
contactList.selectedNode.getProperty('data').value;
MailingList.listingService.getContactInfo(sSelected);
alert(sSelected);
contactList.setFocus();
</cfformitem>
<cftree name="contactList" lookAndFeel="motif"
onchange="listingTreeChanged()">
<cftreeitem value="Test" display="Test" expand="no">
</cftree>

I modified msgdb/l_en/customMessages/viewmessages.xml in the following lines's text:
<WebMessage name="kmsgEVCNoRows"><HTML>Sorry. No data found.</HTML></WebMessage>
<WebMessage name="kmsgEVCNoRowsFilters"><HTML>The specified criteria didn't result in any data. This is often caused by applying filters that are too
restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below.<span s
tyle="font-size: 4pt;">
</span><sawm:param insert="1"/></HTML></WebMessage>
I restart both server and presentation server, but I saw no effect on report page.
I tried to put the file under msgdb/customMessages/ but still no change.

Flash Player error messages from browser?

Hello.
So a client I'm building assorted things for gets these annoying error dialog boxes popping up in web pages that I never see myself. But they are akin to those I would see if I were running a SWF locally from my hard drive in my Flash Player. I've tested for these errors repeatedly on different servers and different computers and am coming to the conclusion that there is something peculiar about the way their Flash Player in their browser(s) is configured. Have they somehow installed a debug mode of Flash Player? Have they turned on some annoying verbose mode? If so how do I tell them how to turn it off so that they can realize that the way things look in their office are not remotely representative of the way Flash is rendering things on 95% of the computers in the world (and 100% of the computers I have tested things on)?
Thanks for your time.

I have searched through every book, forum, and found nothing
on suppressing Flash Player error messages from the browser. If
it's really not possible, this is terrible news. It's nice to think
that we'd encapsulate everything in try catch methods, but come
on....

AEBS(802.11n) and WDS with Express or Extreme

This problem is making me doubt my sanity.
I have an Extreme Basestation and and Express and a new AEBSn.
I previoulsy set up the Extreme as the WDS master and the Express as a Relay.
Now the AEBSn is the master and I can NOT get either of the other two Apple routers to connect and function as WDS Relay stations or WDS Remote stations. I have attempted both using manual configuration following exactly the same steps I did with the Extreme/Express combination.
But it will not work. Neither the Extreme nor the Express will connect to the AEBSn. I do note that the AEBSn does not have a WDS page or tab in Airport Utility but I did select "Allow this network to be extended" and I selected Create a wireless network.
Does anyone know how to make this work? Does it work?
Thanks for any suggestions.

.. the automated system, i'm assuming that you mean selecting next, next next.
Correct - except the word on my Airport Utility is "Continue"
then after the first reboot and the configuration is loaded, go into manual and select "Allow this network to be extended",
Correct - and be sure to turn off Access Control and turn off "Create a closed network". Once you have both basestations configured and working, you can go back in manually and set those options if you need those two extra levels of security.
..it tells me that it can't find any networks to connect to!!
Always make sure you have updated the software and the firmware for both basestations and for your computers. There have been several Airport connect bug and fixes, both to the basestations and to the Airport cards in the computers. And make sure you have the lastest version of the Airport Utility.
(When I first loaded 10.4.10 I screwed up all my wireless connections. I had to go back, reinstall the OS and use the Combo updater to update to 10.4.9 before my wireless would work. Later, on these forums, I learned that the 10.4.10 update had some issues in the first release. About two months after the initial release, I updated to 10.4.10 - using the Combo, NOT Delta - updater and finally had reliable wireless connections.)
Once other note: I have done a LOT of work on my neighbor's LAN. I finally figured out that their ISP's modem had NATs and DHCP running on the modem. I could not make their network work until I turned off NATs and DHCP on the LAN router (bridge mode). Make sure you do not have DHCP/NATs conflicts with your ISP's modem.
Leave the second device unplugged until you have the first basesetation configured and you can connect to it wirelessly. Disconnect your Ethernet cables to make sure there are no conflicting IP addresses or host names.
Once you have connected to the first basestation, then open Airport Utility and wait for the second device to come up.
Do not double click on the second basestation. Just click it once to select it then click "Continue" . Read all of the options carefully. I do not remember the exact language but one option is to connect to or expand and existing network. Once you get to that point, it is fairly simple.
Good luck! Let me know if it works.

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: OR

Hi,
if the query where my resource gantt chart is based on returns more the 107 rows, i will get the following error:
chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
If i reduce the number of results, the chart is working fine.
Max rows attribute of the series is adjusted to 4000
Any idea?
Thank you

Thank you,
I have tried it, but it I am not able to make it work, here you find a snip of my pagesource:
<anygantt> <resource_chart>
<resources>
<resource id="341" name="Drexler, Franz" />
<resource id="5" name="Gross, Johannes-Ludwig" />
<resource id="8" name="Pecherski, Andrzej" />
<resource id="131" name="Steinmetz, Raphael" />
<resource id="191" name="Jenks, Raymond" />
<resource id="33" name="Alhambra, Roda Marie" />
<resource id="31" name="Daminescu, Adrian" />
</resources>
<periods>
<period resource_id= "31" start="24-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-13 12.00.00.000000000 AM" end="04-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="26-JAN-13 12.00.00.000000000 AM" end="04-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="01-JAN-13 12.00.00.000000000 AM" end="06-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="22-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="21-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="07-JAN-13 12.00.00.000000000 AM" end="11-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-DEC-12 12.00.00.000000000 AM" end="21-DEC-12 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="26-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "33" start="25-FEB-13 12.00.00.000000000 AM" end="25-FEB-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="28-MAR-13 12.00.00.000000000 AM" end="29-MAR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="09-APR-13 12.00.00.000000000 AM" end="09-APR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-MAY-13 12.00.00.000000000 AM" end="01-MAY-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="12-JUN-13 12.00.00.000000000 AM" end="12-JUN-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="26-AUG-13 12.00.00.000000000 AM" end="26-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-NOV-13 12.00.00.000000000 AM" end="01-NOV-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="31-DEC-13 12.00.00.000000000 AM" end="31-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="21-AUG-13 12.00.00.000000000 AM" end="21-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="15-OCT-13 12.00.00.000000000 AM" end="15-OCT-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "8" start="23-DEC-13 12.00.00.000000000 AM" end="23-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-13 12.00.00.000000000 AM" end="27-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-14 12.00.00.000000000 AM" end="03-JAN-14 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-MAY-13 12.00.00.000000000 AM" end="24-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-MAY-13 12.00.00.000000000 AM" end="29-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="11-FEB-13 12.00.00.000000000 AM" end="11-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="29-JUN-13 12.00.00.000000000 AM" end="14-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="16-AUG-13 12.00.00.000000000 AM" end="16-AUG-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "8" start="26-AUG-13 12.00.00.000000000 AM" end="30-AUG-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-SEP-13 12.00.00.000000000 AM" end="06-SEP-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="15-FEB-13 12.00.00.000000000 AM" end="15-FEB-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "5" start="13-MAR-13 12.00.00.000000000 AM" end="13-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="22-MAR-13 12.00.00.000000000 AM" end="22-MAR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="20-MAR-13 12.00.00.000000000 AM" end="20-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="08-APR-13 12.00.00.000000000 AM" end="08-APR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "31" start="05-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="02-MAY-13 12.00.00.000000000 AM" end="03-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="01-JUL-13 12.00.00.000000000 AM" end="22-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="09-MAY-13 12.00.00.000000000 AM" end="12-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "191" start="04-JUL-13 12.00.00.000000000 AM" end="06-JUL-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "31" start="15-JUN-13 12.00.00.000000000 AM" end="30-JUN-13 12.00.00.000000000 AM" style="green" />
</periods>
</resource_chart></anygantt>
</textarea>
<div id="chartDiv"></div>
<script type="text/javascript" language="javascript">
/* Set default swf path */
AnyChart.swfFile = 'i/flashchart/anychart_6/swf/OracleAnyChart.swf';
/* Create new gantt chart */
var chart = new AnyChart();
chart.width="2500";
chart.height="2500";
/* Get string data from text area */
var data = document.getElementById('rowData').value.toString();
/* Set data */
chart.setData(data);
/* Write chart to "chart" div */
chart.write("chartDiv");
</script>
do you have a idea whats wrong? thank you

Flash chart - Error - No chart data available

Hi
I have a Flash chart that shows the message "Error - No chart data available" (not the no data found message).
If I run its query in sql*plus (using the same parameters) I get 4 rows (with url, label and value columns). I am clueless about how to start investigating this as the chart does not show any other information... Any advice?
What does that message mean? Obviously is something different from no data found?
Thanks
Luis

Hi Marco
Thanks for the reply. I did what you said and found out the problem:
chart Flash Chart error: ORA-20001: get_data error: ORA-20001: Fetch error: ORA-01843: not a valid monthThis was caused because I used the following construction:
where date_from = :p5_date_fromIf this was a report, this would run fine as I set the date format mask using a application level process. However, as Flash charts use separate database connections, they ignore that setting (btw I posted a message about this problem).
I fixed it hardcoding a format mask in my SQL. Not nice but it works!
Thanks
Luis

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Due to flash drive error on MBA my drive was wiped yesterday and OS re installed. How to I get my bookmarks still on my iPhone back onto the mba

Due to flash drive error on MBA my drive was wiped yesterday and OS re installed. How to I get my bookmarks still on my iPhone back onto the mba

Hi Nathanbeyondme!
I have an article that can help you with that question:
OS X Mountain Lion: Store your content in iCloud
http://support.apple.com/kb/PH11421
Safari bookmarks and tabs
iCloud keeps your bookmarks and Reading List the same in Safari on your Mac, iPhone, iPad, and iPod touch. On your Mac, Safari also uses iCloud to let you open tabs that are open on your other devices. You set up the Safari service in iCloud preferences.
If you are having issues with syncing these bookmarks, you will want to reference the following article:
iCloud: Troubleshooting iCloud Bookmarks and Reading List
http://support.apple.com/kb/ts4001
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Flash Builder Error Compiling Ipad Actionscript Mobile Project.

I just bought a brand new ipad for testing. I am using flash buider 4.7 to make an actionscript mobile project. I created an app ID, provisioning profile, and certificate. I have done this before in flash professional so it wasn't too bad. However, when I run or debug even a blank application I get this error in flash builder:
Error occurred while packaging the application:
'Launching AppName' has encountered a problem.
Error occurred while packaging the application.
Exception in thread "main" java.lang.Error: Unable to find llvm JNI lib in:
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/adt.jar/Darwin
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/aot/lib/x64
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/adt.jar
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib
                at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:582)
                at adobe.abc.LLVMEmitter.<clinit>(LLVMEmitter.java:596)
                at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)
                at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)
                at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)
                at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)
                at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)
                at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:245)
                at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)
                at com.adobe.air.ADT.run(ADT.java:419)
                at com.adobe.air.ADT.main(ADT.java:469)
I have no idea where to even start in trying to figure out what could be the problem. I am pretty sure the itunes developer information is correct. Are there any kinds of drivers or developer modes that I need to set for a new iPad?
Thanks!

Thanks Shongrunden for your reply.
Yes, you are right. If I make a new Flex mobile project, I did not see the issue.
But that did not fully answer my question, my concern is: can an actionscript project use spark components?
Thanks.

Flash Security Error

I how can I solved the Flash Security Error? I can't view a chart that requires Flash.

Has anyone been able to resolve this issue? There is also a similar older post (http://forums.adobe.com/message/32592#32592) that has not been answered.
I have a Flex app on my website that downloads a file from the same place. Both are under the root directory. This works fine in IE7, IE9, Firefox, Chrome, and Opera. In IE8 I get the error (error text is "Error #2048"). This is on 32- and 64-bit XP machines.
I even tried putting a crossdomain xml file (which should not be needed) to no avail.
Any help would be appreciated.

Flash Content error......

Hi
I found the error popup windows "Flash content error : 9" is
displayed when swf file is played in Flash Lite 2.0 on Symbian OS.
What is this error popup mean?? And how can I solve this
problem??
Please, help me....
Thank you.

Hi Ashish,
This is the actionscript stuck error, you are trying to do
too much in a single frame. It could be that you are loading too
much XML data or other data from a network connection. You may be
trying to process a lot of Actionscript in a single frame.
If you are using XML then you should consider a different
format, maybe key value pairs.
Another approach is to load pieces of the data and process
them in batches. You can use setInterval to enable a fake
asynchronous behaviour.
Mark

AEBS/relay/remote flashes WDS Errors

Similar Messages

Maybe you are looking for