Aebs stops working, but still shows green light
I will be connected to the aebs when it will suddenly and without warning disappear. No wireless devices can see the aebs and anything connected via ethernet loses its connection. The device still shows a solid green light, but it must be unpluggeed and replugged to reset it. Sometimes it will come back for a couple of days, sometimes only for a few minutes or even seconds. Originally I was having problems with a wireless telephone, but I replaced that and it seemed to be fine for awhile. Is it possible I just have a bad aebs?
Airport Extreme with 802.11n (Gigabit Ethernet)
Version 7.2.1 (as far as I know latest firmware and software, nothing newer is found with software update)
Airport base station agent 1.2.2
Airport Utility 5.2.2
Apple80211Agent 5.0.1
Mac OS 10.5.1
bought this iMac new about a month before the latest iMacs. there is one other iMac and sometimes Windows machines on the network, plus iphones, playstation 3 and wii (but those connections are intermittent). There doesn't seem to be any pattern as to what is connected to the network when it goes out.
Using WPA/WPA2 encryption 9 characters.
The SSID also stops broadcasting when it goes out.
Thanks,
Jim
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Similar Messages
-
IMessages are on and active but still showing green
IMessages are on and active but still showing green
Is the recipient also using iMessages, and if so, do you have the correct address?
-
Remote volume stops working but still changes channels
my remote volume will stop working after a while and i always would reprogram it. fios told me all i have to do is press "tv" and "volume" same time and it will work. this isn't working? anyone have remedy?
There are many considerations for these remote control issues. The Verizon Supplied (Motorola or Phillips made) remote controls are designed to first work the cable company’s set-top-box, and then operate as many TV’s on the planet that it possibly can. Meaning it might never quite bas a good with your TV as the remote that came with the TV.
Still there’s hope! Especially if it used to work! Here’s some things to try…
1.) Is it possible the remote got switched from one room to another? Think of these cable-company supplied “universal” remotes as being married to the TV not the set-top-box.
2.) Try fresh batteries, the TV may need more “punch” from the remote than the set-top-box.
3.) Re-Program the remote, instructions for this are at:
http://netservices.verizon.net/portal/link/help/item&objId=14933
for the black Phillips remote or at
http://netservices.verizon.net/portal/link/help/item&objId=14934
if you have the gray colored Motorola remote -
Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?
In what way is it not working?
Please describe in detail all you have attempted to do in order to resolve the issue. -
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
But how actually can I debug or fix it? Thank you.Here are a couple suggestions:
1. Go into Settings > Safari and Clear Cookies Clear Cache
2. Fully close Safari: from your home screen, double tap your home button and the most recently used Apps will show up. Hold your finger on the Safari App until all Apps start jiggling. You'll see a minus sign on the upper left side of Safari. Touch the minus and Safari will fully close. Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
3. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
After iPad comes back up, try Safari again, and you should be good to go. -
Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.
That is very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
Tested video cards for Photoshop CC and CC 2014
Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work. -
Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.
Is your web browser working normally?
-
Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.
All you have to do is connect your new iPod to the computer that has the library for your old iPod.
When iTunes comes up, click on your new iPod under Devices.
At the top of the Summary Page click Music.
Click Synch Music.
Do the same thing for Photos, Apps, Movies and so on...
Now just synch the iPod. -
I Pod Touch Music player stopped working but Sounds and iTunes samples still work?? Help.
Howdy. My Music player has stopped working, but regular sounds and iTunes samples still work?? Can anyone help.
Push the orange music button and the player opens, but when I push the play button nothing happens other than the pause icon comes up.
Both side volume and the onscreen volume read at full.-restore ipod to latest ios if problems still happenes then it's a hardware problem nothing like a good old appointment at genuis bar would help.
-
My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.
It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
MacBook Pro power adapter doesn't show green light when fully charged
I've had a quick search through the communities and there are a lot of posts about chargers and indicator lights, but I'm not sure I'm really satisfied about my own issue so I thought I'd ask anyway.
Basically, I bought a spare power adapter (genuine Apple 85W MagSafe2) for my new 15" Retina MacBook Pro in a store the other day, to save me lugging my main adapter to and from work all the time.
Using it for the first time made me realise that the adapter I got with my MBP behaves slightly differently re: the LED indicators. The new one from the store shows amber until the MBP is fully charged, then solid green once fully charged. This I believe is perfectly normal.
The charger I got with the MBP shows amber whilst charging, but only shows green very briefly when fully charged and then the indicator goes out completely. OSX (10.8.2) still indicates that it is connected to the power source though, and the battery doesn't drain or anything at this point - it definitely appears to be functioning as expected.
Aside from this, I can determine no real difference between the two adapters in terms of charging speed or general functionality, they both appear fine.
I just wondered if anyone else had ever seen this?
I did reset the MBP's SMC settings too, but it made no difference. I'm inclined to think there isn't an issue with the laptop itself since the new adapter's indicators work exactly as I'd expect, but then again the original adapter seems to function perfectly so I'm wondering if there's just some trivial issue with the green LEDs or something like that.Really doesn't matter if anyone else has or has not seen something like what you have. Your original adapter is faulty in one way or another and you should take it in to Apple with your rMBP to show them what is happening and Ask Nicely for a new one that works correctly.
-
AEBS stopped working/ airport utility can't read base station configuration
AEBS was working fine including the 7.1 update except printer wasn't working. As I attempted to trouble shoot network, AEBS stopped working. I tried accessing it through airport utility but it couldn't find the base station. I have now done a hard reset four times and though airport utility will recognize the base station it gets hung up trying to read the base station configuration. So I can't troubleshoot the AEBS from airport utiltity and the yellow light keeps flashing. What do I do now?
AEBS was working fine including the 7.1 update except
printer wasn't working. As I attempted to trouble
shoot network, AEBS stopped working. I tried
accessing it through airport utility but it couldn't
find the base station. I have now done a hard reset
four times and though airport utility will recognize
the base station it gets hung up trying to read the
base station configuration. So I can't troubleshoot
the AEBS from airport utiltity and the yellow light
keeps flashing. What do I do now?
I had the same problem and a hard reset (6 seconds on the reset button) was recommended by Apple Tech support and that did it for me. The AE was back being seen and allowing me to reconfigure it from scratch. -
Pavillion Laptop with Windows 7 - Speakers have stopped working but headphones do!
Hello
I have a Pavilion dv6 Notebook, with an AMD A8-3500M APU and Radeon HD Graphics card. It is a Windows 7 64 bit system and was purchased in october of 2011
The speakers on my laptop have suddenly stopped working, but external speakers continue to function. I have tried the windows troubleshooter, resetting defaults on playback devices, and updating drivers both through the device manager and through HP Recovery manager. I have tried uninstalling and re-installing drivers, and a hard reset ofthe computer (unplugging all devices and power sources, waiting and restarting). I have tried System Restore to restore the system to a date before the problem. None of these have helped. Anyone have any ideas?Hi there @Rob5
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having problems with the notebook speakers., and I am happy to help with this. From all the trouble shooting you have described it sounds like it may be that the speakers themselves may have gone bad, or the connection is loose.
Before we look at the possible physical problem, take a look through this page first, just in case there is something you have not yet tried.
No Sound from the Speakers (Windows 7)
If you are still getting now sound, then take a look through page 62 of 137 in this guide:
HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
That page shows how to replace the speaker assembly and the relevant part number, but before going that route, I would suggest just disconnecting and reconnecting the speakers, in case it is just a bad connection. Over time a connector can work itself loose. Just doing that may fix the problem. If not then you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!
Maybe you are looking for
-
In the book module. I select one of the cover options that has a text box. When I type and get to the end, the text does not wrap to fill the box. Instead it types over the same line. Is there a way to have the text continue to the next line? I am us
-
Mac book pro running parallels gets waaay hot,,,what can i do
When using my retina display mac book pro the bottom of the unit gets really hot,,,uncomfortable to touch and you can feel the heat coming through teh key board
-
Is this part # 661-2587 the one for the v.92 internal modem??
I know that this modem will fit right into my AGP G4, but I need to know if this is the part number for the V.92 modem. I won't make the upgrade unless I know it is the newer protocol. Any help is greatly appreciated. Thanks in advance.
-
Is there a video player that doesn't use temp files?
I need to find a video player that doesn't leak anything to the disk when playing files. The swap is already encrypted so that is no big deal. I view confidential client videos from a truecrypt encrypted disk. Thanks
-
Authentification failed messages with Adobe Content Viewer (still)
I heard that there was a problem with Authentification failed messages with Adobe Content Viewer this morning with a server issue but I am running into those issues tonight. System Staus reads green. All my log-in info works in other places. What's u