AEGP Plugin CINEWARE SceneLayer: CINERENDER - Close (5027 :: 12)

I get this error everytime I try to ram preview or render my project.
Tried all the troubleshooting I could think of.
Every C4d project I import creates this error.
I'm on an ASUS LapTop
i7 2.4
16 gigs ram
Nvidia 670m 3gbs
WIndows 8
Exact same set up on the MAC 10.8.2, works fine.....

Hi, I had the exact same problem, but I solve it :
I just have to desactivate my antivirus when I do a preview/render. My antivirus block the interaction between AE and C4D.
Solution find on:
details of CINEMA 4D integration with After Effects CC (12.0)
"Depending on your computer’s security settings, you may see some warnings about TCP communication; this is because After Effects and the background CINEMA 4D renderer are communicating using TCP, which some security software may interpret as dangerous malware communication. For example, Mac OS will ask you to confirm if you want to run this software “downloaded from the Internet”. Go ahead and accept the communication between these applications. If you can import a .c4d file, but it fails to render, check your security settings to see if Mac OS Gatekeeper or your firewall are blocking the background CINEMA 4D renderer from functioning and communicating with After Effects. In Mac OS, check the General tab of the Security & Privacy system preferences, and make sure that Allow Applications Downloaded From is set to Anywhere. (Note that the TCP port used is defined in the Options in the CINEWARE effect, and the choice is stored in the After Effects preferences file.)"
Hope that can help .

Similar Messages

Module externe AEGP Plugin CINEWARE SceneLayer: CINERENDER - Close (5027 § 12)

Hi adobe,
I get this error everytime I try to ram preview or render my project.
I searched hour and hour to find a solution to my problem ...
Every C4d project I import creates this error.
Config :
Proc: Intel(R) Core(TM) i7-4790k CPU @ 4.00Ghz
RAM: 16,0 Go
AE:
Adobe After Effect CC 2014
C4D:
Cinema 4d R14.042

Sorry for the disarregement :
I find a solution to my problem :I just had to desactivate my antivirus ^^, it block the interaction between AEF and C4D so cineware close ...

Cinema 4d Lite ERROR: AEGP plugin CINEWARE SceneLayer: CINERENDER - connection failure 5027 :: 12

Folks
I've tried contacting Adobe chat support a day ago with no luck and no answers for this.
I have a workstation at work that is working just fine. My home workstation is what is giving me this error.
Home workstation specs: i5 cpu, 16gb ram, nvidia quadro k620
The suggestion from Adobe chat support was to uninstall After Effects and re-install. This did not help.
Steps to create:
1. Create new AE project
2. Create new Comp
3. Add new Cinema 4d layer
4. Name and save Cinema file
5. AE hangs for a minute or two then throws this error:
AEGP plugin CINEWARE SceneLayer: CINERENDER - connection failure
5027 :: 12
I see someone else had this identical problem but no where in the thread does anyone give a clue what solved it?
Any ideas from you folks on what I should/could do to fix this?
Thanks a bunch!
Kellie

Look like I've fallen victim to the same issue too.
Thanks for all the posts above.
I can't actually get the Chinaware Effect/Plugin to launch at all in AE so I can't get to the Options settings.
I'm now running on another machine and I'm worried the same problem will occur on that mac too.
Can anybody tell me which other Port Options I can use in this event? I'm clueless when it comes to this sort of issue.
Thanks chaps.

Anyone know why i am getting AEGP plugin cineware scenelayer: cinerender - connection failure (5027::12)

please help

Nobody can tell you anything without proper system info or other technical details like what versions of AE and C4D.
Mylenium

AEGP Plugin CINEWARE SceneLayer: CINERENDER - Connection failure (5027 :: 12)

This error comes up whenever I try and make a new .c4d file, edit a preexisting .c4d file, sometimes when I just open aftereffects. When I import a .c4d file the error occurs, but it shows up in my project regardless, but when I try to drag it in, its just a black screen. I have tried uninstalling and re-installing Aftereffects twice, and while I've never torrented anything before, I wanted to see if the "official' cinema4d would work, still nothing. When I try to open Cinema4d lite directly from the Program Files folder, it says I'm missing a ddl file, but obviously it wasn't a corrupted install otherwise it would have worked when I re-installed it. I just submitted a bug report to Adobe as well. Anyone got any ideas?
My Computer: Running the latest version of Windows 8.1, on a Desktop computer fully capable of running Cinema 4D without any lag.
Adobe After Effects: Runs perfectly otherwise, Version 13.2.0.49 2014.2 Release, using the Trial Version (28 days remaining, though I full intend to start a subscription as soon as I get this resolved)
Thank you for any help you can give, this has been driving me insane,

Yep! I contacted support, Adobe's support is the worse I've ever had, they have maybe 2 experts available. But I managed to get through and they spent like half an hour, and fixed it. I have to do a workaround that takes like five minutes, and it sucks, but it works. They said its an authentication error, and that once I get the full version (which I will when my trial runs out tomorrow) it should just work. So either spend hours, and I mean 5 or 6 hours, on the phone with support to schedule someone to call you in a week, or get the full version and see if it fixes it.
Good luck!

AEGP Plugin CINEWARE not found (5027::12)

AEGP Plugin CINEWARE SceneLayer: No Cinema 4D Installation was found (5027::12)
but I was using it this morning. How can I get it back, or reinstall it?
I am new to using C4D Lite, and have some other start-up questions (buttons don't do the right thing, there must be some initialization step I'm missing). A little help there would also be appreciated.
I am a Creative Cloud subscriber.
Thanks in advance.

The C4D install not being found probably means that you have mundane user privilege/ file permission issues or e.g. your virus scanner is blkocking communication with the extern C4D process from within the AE host plug-in. Turn that stuff off and run with sufficient user privileges. The rest is neither here nor there. I know you're gonna hate me for it but as per your own words "buttons don't do the right thing, there must be some initialization step I'm missing" doesn't really strike me like you even bothered to read the help. The least you could do is tell us what buttons you actually pushed. The default UI layout even in teh stripped down version that C4D Lite is has something like 120 visible icons/ buttons... Really nothing personal, but you would do good to at least look up some basic C4D tutorials. The buttons most likely do what they always have done, but you are using them in the wrong way or expect something that they can't do.
Mylenium

AEGP Plugin MediaIO Plugin:MediaIO2 error:0x4 not enough memory to complete this encoding (5027::12)

I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.
Computer's Processor: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
Computer's RAM: 2.00

First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size.

After Effects: AEGP Plugin TIFFIO: UnExpected End of File (5027 :: 12)

I have a clown render for an animation I am working on (the content is not important). When I duplicate the first layer, flip it horizontally there are no problems when I run a RAM preview. But when I time reverse the layer I get this error message "After Effects: AEGP Plugin TIFFIO: UnExpected End of File (5027 :: 12)". Now in the past this meant that some of the tiff. renders had been corrupted due to copying and pasting the still frames into another folder using windows explorer. So to fix the issue I would simply re-render the still frames to the proper folder which meant I no longer needed to copy and paste the still .tiff files. But now whats different this time is that the error message only pops up when I use the "Layer, Time, Time-Reverse Layer".
This should work. I have done this exact animation at a smaller resolution (800x800). The only difference is now I have re-rendered the same footage at a higher resolution (1424x1424).
Anyone know what causes this issue?

It might be just one file in the sequence that's flakey and it only shows up with reversal, because you may never have actually sampled the frame in normal mode. This might also have shown up during render only, e.g. when rendering with fields would have sampled the frames at a different time. I'd re-check your sequence. As ´TimeRemapper said, it may also be an issue with teh options you chose for saving the TIFFs. In that case running it through an image viewer/converter like XnView or Maya's fcheck utilty might fix the problems...
Mylenium

AEGP Plugin Premiere Pro Import: Unknown error

Upon importing my Premiere Pro project into AE, I get the following error:
After Effects: AEGP Plugin Premiere Pro Import: Unknown error. (5027 :: 12)
I'm using PPro 3.1.1 and AE 8.0.2 on Mac OS X 10.5.2. It's a 23.976 project. I've tried copy-pasting the timeline and get the same error. Anyone have any ideas? Thanks,
Ryan

And if you are working on two macs, when working from the other mac save that file to your local hard drive, then creative cloud will automatically save that file to creative cloud... when you switch mac you will have the updated file in creative cloud! Open the file and when you have finished, save as to your local hard drive, and creative cloud will then again automatically save it to creative cloud! I think the easiest way to look at the cloud is seeing it as a back up so every file you save to your hard drive will be automatically backed up to creative cloud.

AEGP Plugin SDK_IO Error

I am getting an error message whenever I open after effects CC. Here is the error message.
"After Effects error internal verification failure, sorry! {Unexpected FunctionBlock5 flags for FunctionBlock4} (5024 ::53)"
After I click OK button, i get another message
"AEGP Plugin SDK_IO: Could not register file type. (5027 :: 12).
After another click on OK I get, "AEGP Plugin SDK_IO: There was an error registering the plugin. (5027 :: 12)."
Any idea why are these message popping up? Even after these errors, I am able to work on AE. But is very annoying. Can somebody give me a solution please. I have not installed any plugin recently.

In my case what was causing the problem was having C4D's exchange plugins: C4DFormat and C4dImporter installed. (Check both your format and extensions folders inside AE's plugins directory as well as in MediaCore)
I recommend you check this discussion http://forums.adobe.com/message/5477522#5477522

How to Set Pixel Format for AEGP Plugin???

Hi,
Does Anyone know how to set pixel format (ARGB or BGRA etc) for After Effect (AEGP) Plugin (Source Generator).

It requires the Canon Hacker's Developement Kit (CHDK). It runs off of your SD card and does not harm your camera. Download a program called Stick-
http://zenoshrdlu.com/stick/stick.html
Follow the directions and you will be able to shoot in RAW along with some other deatures not available on your camera previously.

Using Qt in a AEGP plugin. QWidget can't get after effects as parent window

Hey guys,
I'm trying to use the qt framework to create a user interface for my AEGP plugin. And I'm running into some problems.
First, I tried to pass the main HWND into a QWidget, but the QWidget can't seem to recognize it as a parent window. My code looks like this,
A_Err err = A_Err_NONE;
AEGP_SuiteHandler suites(basicSuiteP);
HWND handle;
ERR(suites.UtilitySuite5()->AEGP_GetMainHWND(&handle));
qt tt(handle);
tt.show();
qt is a child class inherit from QDialog with a custom constructor
qt::qt(HWND hWand) :QDialog()
create((WId)hWand);
setModal(true);
The qt window did show up, but it can't block user's interaction with after effects' main window. When a QDialog pops up, it will block user's interaction with its parent window until it's closed. But it doesn't seem to work with after effects.
And, I'm wondering, is it possible to add a QWidget to after effects' native panel? For now, my qt window is floating as a separate window. can I just add my qt widgets into a after effects panel so it can dock into after effects' main window?

FCP doesn't work with H.264 files. It might bring it in, or it might not. It might seem like it's working, but then sync drifts. It might look like it's fine, but when you export different sections jump to other clips. It's unpredictable.
FCP 7 and H.264 do not mix.
If you are exporting files out of AE on a PC, then look at exporting them as DNxHD...the Avid codec. or Cineform. Then the FCP user will need to install the Avid codec or Cineform in order to see the file, but then they should convert it again to ProRes 422...as working with non-FCP codecs in FCP can be problematic. I recommend those formats over the others, like ANIMATION or UNCOMPRESSED...because of the file size issues.
If you are using AE on a Mac, the same computer as FCP...then export as ProRes right away. Done and done.

What tools should I use to create a UI for an AEGP plugin for CS6 on a Mac

I see that for CC the suggested UI tool is HTML5, but what should be used for developing a plugin that must also run in CS6 on a Mac?

For CS6, you can create panels using ScriptUI, to add a custom panel to the Window menu.
A script like this would be installed here: ..\Adobe After Effects CS6\Support Files\Scripts\ScriptUI Panels\
For ScriptUI, there is some documentation in the JavaScript Tools Guide, accessible from the ExtendScript Toolkit application > Help > JavaScript Tools Guide; and also here - http://www.kahrel.plus.com/indesign/scriptui.html

Determining frame requested by After Effect (AEGP Plugin)

Hi,
I am writing Source Generator(AEIO)(File Importer) plugin for Adobe After Effect.
Frames from file are to provided in AEIO_DrawSparseFrame callback.
But AEIO_DrawSparseFrame does not tell which frame it wants.
Also if we treat tr as current frame time in AEIO_DrawSparseFramePB structure, then also there are no consecutive calls to frame time when we render (i.e there are calls to frame number 0,2,4...).
Does anyone has any idea to determine the frame number required by After Effect and in consecutive sequence (i.e 0,1,2,3 ...).
Thanks

Huh? What are the comp settings? They must be 720x480 for NTSC or 720x576 for PAL with teh respective correct pixel aspect ratios. Also make sure to disable/enable audio as needed in bothe the main Output Module settings >>>and<<< the MPEG-II exporter (just in case this will be the next error that pops up.
also see here: http://mylenium.de/ae_errors/ae_errors_50xx_formats.html
Mylenium

AEGP Plugin Media IO Plugin error 400e0004

I get this error when I try to
render a FLV file. Comp size is 720x1280 (portrait) square pixels and 24 fps.
Using Windows 7 64-bit and Adobe AE CS4 (32-bit)
What is odd is that if I open Adobe media Encoder and drop in the same comp with the same settings, it works. I just should not have to do the extra steps in my opinion.

I remember talk of a bug, where FLV output would not work beyond 1080 pixels in either dimension. This should have been fixed in the 9.0.2 update, but then again it may not or be only half fixed (in one dimension, that is). If so, your current workflow would be the only way to circumvent the issue...
Mylenium

AEGP Plugin CINEWARE SceneLayer: CINERENDER - Close (5027 :: 12)

Similar Messages

Maybe you are looking for