AERender render only mode, restricted codecs, and errors

There is a page here detailing how to put aerender into restricted mode, so that a license key isn't required.
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103a4f2dff7-79a3 a.html#WS3878526689cb91655866c1103a4f2dff7-79a2a
There is a page here explaining that we can use "network rendering (aerender and watch folder) without activation of render-only nodes" and that a limitation is "In this mode, some codec-specific features are disabled—primarily use of MPEG codecs."
http://blogs.adobe.com/toddkopriva/2012/04/after-effects-cs6-whats-new-and-changed.html
Does anyone know what codecs specifically work and which ones don't? I don't know how anyone is supposed to know this. I've tried testing but I get stuck because everytime I enable render only mode, I get an error saying:
aerender ERROR: No output module template was found with the given name.
Which doesn't make any sense, because when I disable render only mode everything works fine. I've tried with a number of different templates and it happens to all of them, h264 mp4 and 3gp, m2v, png sequence, and lossless AVI.

MPEG CoDecs are H.264 and all MPEG-2 flavors as well as MP3 audio and that. The other error could merely point to permission issues when in render mode, but naturalyl, if you do this on teh same system, the render only version will stil lread your normal prefs, which could include references to the then invalid output modules...
Mylenium

Similar Messages

Why can't we upload photo to profile page it is only 6.8 mb and error says it is too big

why can't we upload photo to profile page it is only 6.8 mb and error says it is too big

Yeah, about that... Apple stopped signing iOS 5.1.1. Because Apple is no longer issuing it. Apple only issues the most current software for a given device. See http://images.apple.com/legal/sla/docs/iOS6.pdf It states:
"Subject to the terms and conditions of this License, you are granted a limited non-exclusive
license to download iOS Software Updates that may be made available by Apple for your model
of the iOS Device to update or restore the software on any such iOS Device that you own or
control."
So per the Software License Agreement you HAD TO ACKNOWLEDGE to upgrade to iOS 6 you agreed to use iOS 6 in accordance with that agreement and it doesn't give you permission to downgrade your version of iOS.

Render only only one side of 3d displayObject?

With CS4 is it possible to set a 3d DisplayObject to render only the front side and not the back side - like you can in papervision?

This has happened to me several times also with my powerbook. I fixed it by going into finder > Applications > Utilities and then opening Audio MIDI Setup. Apparently the audio output on my left speaker for some odd reason lowered. So even if I fixed the balance, there was no sound on my left speaker until I raised the volume from here. There's two sliders under Audio Output towards the bottom. Adjust those.

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

My iPod touch 5 will not turn on, charge, is not recognized by computer or iTunes, will only be recognized when in recovery mode but then an error 1601 occurs and iPod then goes back to being dead and nothing happens

My pod is literally not breathing, no screen display no matter what, I've tried everything, wondering if there's anything I've missed :( please help

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

"Unknown Error" all the time, every time on render of project, any codec

Trying to render a feature length documentary for a film festival (ie.. I don't have time for this). The project timeline runs 1 hour and 20 minutes. If I try and export or queue the timeline in media encoder to h.264, QuickTime or Select "Match Sequence Settings" as my output format, the media encoder fails to render with the very informative "UNKNOW ERROR" every time at random point in the render procedure. When rendering it as an mpeg once, I am able to see one place where it crashed. It is a place in the timeline where the are no transition, not cuts, no overlays, absolutely nothing out of the ordinary. Yet, it crashed there this time. Next time, it will crash elsewhere.
I am trying to render the timeline on segment at a time. So far, each smaller segment of 20 minute blocks seems to be rending just fine and goes past the points where other renders failed. Looks like Media Encoder can't handle large projects.
Here's all the requested information for a complete diagnosis of the problem.
Error given to me by Media Encoder : "Unknown Error" --that's it. The time rendered varies between 43 minutes and 3 hours.
- Encoding Time: 00:54:04
05/03/2015 05:59:03 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
Adobe Premiere Pro CC 8.1 Caravan
2014.2 Release
8.2.0 (65) Build
OS X 10.10.3 (14D136)
iMac (27-inch, Mid 2011)
3.4 GHz Intel Core i7
24 GB 1333 MHz DDR3
AMD Radeon HD 6970M 2048 MB
I'm right handed, my favorite color is blue, the computer is on the Eastern TimeZone
I need this timeline rendered and I'm not interested becoming a forensic-level technical authority on Premiere to get it. This problem has come and gone now for months and is intolerable. I pay for software and I expect it to work, and at least give me something more useful than "UNKNOW ERROR." There is no such thing. As a former developer, I can say with authority that simply dumping to a message that says this is lazy and sloppy programming. Buffer underruns, stack overflows..whatever. Everything is caused by something. I can't begin to diagnose this problem unless Adobe provides software error handing that gives me some idea of what happens. Where did it happen in the timeline? What routine/subroutine gave the error? Was it a codec error? Come on....these things are not unknowable.
Adobe, PLEASE stop coming out with new features when you can't make your existing pay by the month software reliable! Maybe FCPX is worth another look.

UPDATE:
tried rending the entire project as Quicktime ProRes 422 (since that is what clips were recorded in originally anyway) and Media Encoder gto 89% complete....and the entire application CRASHED. WHO-HOO! Way to go, Adobe!!!!!
Here's part of the crash report if it means anything. Maybe I'll try it again and see if anything changes! Can't get any worse.
Process:               Adobe Media Encoder CC 2014 [864]
Path:                  /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Identifier:            com.adobe.dynamiclinkmanager.application
Version:               8.2.0.54 (8.2.0)
Code Type:             X86-64 (Native)
Parent Process:        dynamiclinkmanager [826]
Responsible:           dynamiclinkmanager [826]
User ID:               502
Date/Time:             2015-05-03 20:05:05.829 -0400
OS Version:            Mac OS X 10.10.3 (14D136)
Report Version:        11
Anonymous UUID:        5CCC287C-7B70-E4F9-D0E8-4180FB0681CC
Sleep/Wake UUID:       0ED73954-6C5A-4CCE-B807-974B71171E95
Time Awake Since Boot: 33000 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_CRASH (SIGBUS)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib         0x00007fff94c8d4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff94c8c64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff94955eb4 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff9495537b __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff94954bd8 CFRunLoopRunSpecific + 296
5   com.apple.HIToolbox           0x00007fff8ab7256f RunCurrentEventLoopInMode + 235
6   com.apple.HIToolbox           0x00007fff8ab722ea ReceiveNextEventCommon + 431
7   com.apple.HIToolbox           0x00007fff8ab7212b _BlockUntilNextEventMatchingListInModeWithFilter + 71
8   com.apple.AppKit               0x00007fff8c8fe9bb _DPSNextEvent + 978
9   com.apple.AppKit               0x00007fff8c8fdf68 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 346
10 com.apple.AppKit               0x00007fff8c8f3bf3 -[NSApplication run] + 594
11 com.adobe.exo.framework       0x00000001057f3a88 exo::app::OS_AppBase::RunEventLoop() + 56
12 com.adobe.ame.application     0x00000001000195c1 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 11809
13 com.adobe.ame.application     0x0000000100049ba8 main + 440
14 com.adobe.ame.application     0x0000000100003e34 start + 52

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
            object fileName = "";
            string filePath = "";
            string strSaveasPath = "";
            DialogResult result = openFileDialog1.ShowDialog();
            if (result == DialogResult.OK)
                fileName = openFileDialog1.FileName;
                //strSaveasPath = Path.GetDirectoryName(path.ToString());
            //fileName = "Z:\\C0000000003.doc";
            List<string> _list = new List<string>();
            _list.Add("tridip");
            _list.Add("arijit");
            //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
            object textToFind = "test";
            object readOnly = false;
            Word.Application word = new Word.Application();
            Word.Document doc = new Word.Document();
            object missing = Type.Missing;
            try
                doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing);
                doc.Activate();
                object matchPhrase = false;
                object matchCase = false;
                object matchPrefix = false;
                object matchSuffix = false;
                object matchWholeWord = false;
                object matchWildcards = false;
                object matchSoundsLike = false;
                object matchAllWordForms = false;
                object matchByte = false;
                object ignoreSpace = false;
                object ignorePunct = false;
                object highlightedColor = Word.WdColor.wdColorGreen;
                object textColor = Word.WdColor.wdColorLightOrange;
                object missingp = false;
                Word.Range range = doc.Range();
                foreach (string line in _list)
                    textToFind = line;
                    bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
                System.Diagnostics.Process.Start(fileName.ToString());
            catch (Exception ex)
                Console.WriteLine("Error : " + ex.Message);
                //Console.ReadKey(true);
            finally
                //doc.Close(missing, missing, missing);
                if(doc!=null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                if (word != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                word = null;
                doc = null;
                GC.Collect();
                GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

MP3 and restricted codec support

hi,
finally I have my system set and running. I did go for the KDE4 which I like very much and followed all the steps as stated in the Beginner'S Guide.
However, I don't have MP3 neither other multimedia propietary format access like MP4, AAC, MOV, WMA, WMV or RMVB - I carry my multimedia collection of songs, videos and movies from when I was on WinXP (yikes!)- despite I installed Xine and other utilities as desccribed in the Beginner's Guide.
I do can watch some AVI files but can't access sound stream so they're muted. How do I add full multimedia support to my fresh shiny Arch? I did try to search the forums but there's to seem a problem because I keep receiving desconnections errors.

http://bbs.archlinux.org/viewtopic.php?id=93862
Re: MP3 and restricted codec support
why did you opened a new thread instead of discussion in the previous one?
oops, I did it again, sorry! (yeah, I know you prefer Brtiney saying that )
I just did the same of my very first post: promise to don't screw things again and follow the rules.
@Bralkein: thanks for your tips and useful research, I will stick with xine until I backup my root, then maybe I try gstreamer.
@.:B:.: I have panic of installing things that can break my system, before installing Arch few days ago I came from an entire life in *buntuland, so you'll see : D
Last edited by martin77 (2010-03-27 05:10:09)

Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed. When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
"Windows cannot find '<path to file>'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls". The number seems to increment up each time it happens.
Now here is the strange part. If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
I Googled the error I was getting and found KB211494. It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case. Any other ideas? This is
really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

TG4MSQL ora-28500 error on RECOVER login in READ-ONLY mode

We're connecting from a 10.2 dbase to SqlServer2000 via TG4MSQL. No upfront problem connecting but the Oracle .trc file shows below error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'RECOVER'. (SQL State: 00000; SQL Code: 18456)
Below is the content of .ora file:
HS_FDS_CONNECT_INFO=INETSQL3.ComPro
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
We are using READ-ONLY mode so the RECOVER login was not defined on SqlServer.
Anyone know why TG4MSQL is trying to open a connection as RECOVER? And is there a way to stop it?

Pending transactions turned out to be the culprit. Below is info from our TAR that
provides some detail on what RECOVER is doing.
Oracle handles all transactions as if they were distributed transactions. He takes a very conservative approach on the assumption that you may want to update
or insert later. This has been like this since Oracle version 6 and will never
change. Hence all transactions get handled as a distributed transactions even though there are no simultaneous updates. A common remote transaction would involve reading from SQL Server and then taking that data an inserting into an Oracle database. In the event a transaction gets aborted for some reason RECO must rollback the transaction. SQL Server requires a valid username/password and hence uses the recovery username/password specified in the gateway init file. The default parameters for both are RECOVER , if they are omitted in the init.ora file for the gateway. Obviously these do not exist on SQL Server. Note that this recovery process is detected and processed by the Oracle kernel. READONLY mode only prevents inserts, updates or deletes to be issued to SQL Server and nothing else. The gateway has nothing to do with handling and monitoring transactions to SQLServer. In all likelyhood you have several in doubt transactions in the dba_2pc_pending view. As long as those entries remain RECO will continue to try and rollback these in doubt transactions and fail each time due to an invalid username/password. This will go on until you either manually remove them or give RECO a valid SQL Server username/password to use.
OPTION 1
==========
Code the follwing in your gateway init.ora file
HS_FDS_RECOVERY_ACCOUNT=use the username specified in your db_link
HS_FDS_RECOVERY_PWD=use the password specified in your db_link
OPTION 2
==========
Define a username with password RECOVER on the SQL Server database you are connecting to
OPTION 3 (Manually removing in doubt transactions)
================
Use dbms_transaction.purge_lost_db_entry(local_tran_id)
STATUS should be in collecting
Please see Metalink
Note.126069.1 Ext/Pub Manually Resolving In-Doubt Transactions Different Scenarios
for detailed information

When trying to render i get the error "your hardware cannot render at the requested size and depth"

when trying to render i get the error "your hardware cannot render at the requested size and depth" and does not render,, it is the first time, and happens only when i added a filter from magic bullet and won't render.

Do you have 2 graphics cards in your system?
You can check out your hardware profile using the "System Profiler" app which lives in the /Applications/Utilities folder ... you can also launch it from the Apple menu by choosing "About This Mac..." and then clicking the "More Info..." button. When the app launches you can choose Graphics/Displays from the Contents/Hardware list at left.

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

gets and error and closes.What should I do?
If Safari is crashing.. post a crash report so we can try and help...
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario

Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.

You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

AERender render only mode, restricted codecs, and errors

Similar Messages

Maybe you are looking for