AERO MOBILE : No Firmware Update / RAW Support / not usable

Hi , hopefully, somebody has an idea/solution for the following problem: I could not upgrade the firmware of my aero mobile higher than ver 2.000.184 (which is the pre-installed version). With the installed version, the aero mobile does not auto backup my raw files (nikon nef files) from the sdcard. It only says "no new files" in the web frontend (although there are files on the sd card). As in the iphone app stated, a new firmware (2.000.200) should fix this, but I could not upgrade the aero mobile.What I've tryed so far:-connecting my iphone to the aero mobile (thru WiFi)-connecting my notebook to the aero (thru WiFi)-connecting the aero to the internet by bridge mode-testing the successful internet connection by browsing thru the internet with the laptop connected to the aero WiFi-trying to update the firmware by checking for new firmware (thru config-System-update). Message: "no new firmware found". Does anybody tryed to auto backup raw files and makes this work? Actually.I'm thinking on returning this stuff as it does not what promised... 

I purchased the AeroMobile primarily for backing up RAW files.  At first, I failed to update to firmware 2.000.200 as mentioned above and found the AeroMobile useless.  After playing with it before a trip, I found a workaround with a workflow.  Below is what I do: 1) Download the FileBrowser ("FB") app for my iPad and connect it to the AeroMobile (you don't have to, but FB is much easier to work with for a few dollars);2) Use FB to access the AeroMobile drive (Toshiba Wireless SSD can do but not as easy), as well as the SD card mounted (inserted) in it;3) Copy the entire sub-directory inside the DCIM folder into the AeroMobile.  My sub-directories are named by my camera, e.g., DC-100, DC-101, where my RAW and JPEG files are stored;4) Everytime I am done backing up the RAW files from my subdirectory, I change my sub-directory name, e.g., DC-101 to DC-102, so I know what was backed up the last time.  This way, I just copy the new folder to the AeroMobile the next time.

Similar Messages

  • I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    Is the HP on the airprint list?
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • 'MacBook Pro EFI Firmware Update (v2.3)' not installing

      'MacBook Pro EFI Firmware Update (v2.3)' not installing
            I've tried multiple times now to install this update. When I do, it downloads and my computer will restart around 5 times with the 'beep' the first time. Once its finished the restarts and resumes normally, I check the Software Update via the Apple menu and it still appears in the list of updates.
    What's the cause of this and what can I do to resolve this?

    Is your machine plugged in when you do this?  The firmware update will not take place unless your system is plugged in.  You'll just get a black screen that flashes a few times and it will eventually boot regularly back to what it was.  If the firmware is installing, you'll see a progress bar at the bottom of your display.

  • Updating raw support for Leica T

    When will Apple be updating raw support for Leica T?  Eager to process my raw files.  B&H personnel pointed out that's one of the differences between Aperture and Lightroom, the quickness of support for new cameras.

    As always the answer to this type of question is the same, only Apple knows when a particular camera will be supported (if at all) and they never say in advance.
    You can send them feedback suing Aperture->Provide Aperture Feedback. Don;t know if it helps but it can;t hurt.
    regards

  • Mac mini EFI Firmware Update 1.7 Not supported on system.

    I am attempting to install the Mac mini EFI Firmware Update 1.7 on my 2012 Mac Mini (just purchased) to solve my flickering display problem.  When trying to install the update, it states that the software is not supported on my system.  I am connected directly to my HP 2311x monitor by a HDMI cable.  I can't seem to find an alternative solution to this problem.

      Model Name: Mac miniHere's the information in my System Report:
      Model Identifier: Macmini6,1
      Processor Name: Intel Core i5
      Processor Speed: 2.5 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 4 GB
      Boot ROM Version: MM61.0106.B04
      SMC Version (system): 2.7f1
    Hope this helps.

  • When will the firmware update for the Note 4 be released to support the Gear VR?

    I will need to look at purchasing on another device on another carrier depending on timing.    (Cross checking the Oculus and Samsung dev boards as well)

    Mihos wrote:
    Note 4 update just showed up for my phone a few minutes ago.  Installing now. They really need to communicate these things with the support agents so they can communicate better with us.  We need information to make decisions.  I can say right away, a Verizon device will never be my lead platform for development for this reason alone. Especially when the script for response leads to a link to a page that has nothing to do with phones, much less firmware update information.  This is, in fact, the NJ5 update, so it should work, I will verify for the support techs and the community when I get back to the lab. (I eat lunch sometimes, contrary to popular belief.)  Thanks for whoever prioritized this internally.
    Apparently it was JUST released. http://www.droid-life.com/2014/12/10/verizon-galaxy-note-4-update-vru1anj5/

  • 5530 firmware update found but not compatible?

    Hi, 
    the phone is a french 5530 (no fimlock, no netlock, a free phone), a firmware update is found from nokia, i can download it from the phone. Then it restarts the phone, and a white screen appears with the update bar. But then it just restarts and on the home screen the message appears that it is not compatible with my network provider? I really want to update... but how?

    I'm having exactly the same problem. I even tried downloading via laptop, but it wont complete the installation.
    I am so sick of my phone freezing or switching itself off I have just rang my contract supplier and they are going to arrange to get a new phone sent out. I did ask if I could have a different make of phone as I don't have much confidence in this one, but they will only exchange for the same.
    Let's hope a new phone solves the issues!

  • 10.4.6/firmware update and sync not working? No, .mac is down

    I went to sync .mac this morning, and I guess it was the first time since installing the firmware update and 10.4.6. It first said another computer with the same name was registered, then hung. Next time it said it was not registered and proceeded to sync very slowly then exit with errors. After a reboot there was still trouble. Then I thought to check and found on .mac that the sync service was down since yesterday, and remains down.
    Funny how I thought my system was acting crazy when it was the .mac system itself that's experiencing problems.
    Mark

    I got my bookmarks to sync this morning, but nothing else would.

  • Toshiba 32RL853B firmware update - many features not available

    So after downloading the drivers only to find there is no USB option to upgrade my Regza 32 RL853B, and several failed network download attempts to upgrade the TV firmware, because the overair option is greyed out.
    I finally got a fast enough network connection (internet is woeful where we live), to download the upgrade,
    When it was installed, I expected the Youtube XL to be replaced with something that works.
    I expected an option to be able to join a tablet as I have seen reference to this being possible and have even downloaded an IOS app.
    I even thought I might be lucky enough to get Netflix or some such apps added to the software available.
    Did I expect to much?
    To be honest there appears to be absolutely no change!
    What should I have expected from this upgrade?

    I dont know if you expected too much but usually you can find all the firmware information details and changes on this page.
    [Firmware update information for Consumer Products (TV and DVD/BD)|https://portalcp.toshiba-tro.de/documents/10781/5bafb15d-5e41-46b9-97d2-57dfc56c7699;jsessionid=04184C1F761F1E9B360BF7A6D2 B25D79]
    Unfortunately, for the Smart TV 32RL853B firmware changes are not listed on the page :(

  • EFI firmware update 1.0 not installing

    When I try to install EFI firmware update 1.0 on an Intel Xserve running 10.4.11, the installation proceeds normally and prompts me to reboot upon completion. However, the boot ROM version remains unchanged (XS11.0080.B00) after the machine reboots. Does anyone have any idea why this could be happening? The machine is not booting from a RAID volume, incidentally.

    Apparently, it is necessary to manually power up the machine by holding down the power button until the indicator light flashes in order to activate the firmware update; power cycling the machine remotely with ipmitool does not activate the update. This is not mentioned in Apple's online instructions located at http://docs.info.apple.com/article.html?artnum=306590

  • My MacBook pro did a firmware update now will not accept my password

    My Skype account was hacked so I changed the password for my computer too I did a firmware update the computer started up and went to a black screen asking for my password it does not accept the new or old passwords. I have tried resetting the password with the snow leopard install disc but it will not recognise it and ejects. Please help

    Try image capture (in your applications folder) - or the finder - if neither of these see the card uyou need to try a USB card reader - once you get yoru photos off use the camera format command to erase and reformat the card
    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    LN

  • SMC-firmware update 1.4 not recognized

    Recently I downloaded the SMC-firmware update 1.4 because my new L-shaped MagSafe power adapter was not working with my computer. For a day or so, I was relieved because the update appeared to fix the charger, but then it stopped working altogether again. After trying multiple methods to fix this (unplugging the adapter, trying different outlets, resetting the SMC, etc.), I discovered that my computer was still running SMC version 1.27f3. I've tried downloading the update manually, but every time it says that my computer doesn't need it. Any advice on how I can actually update the SMC?

    It turns out my adapter was actually broken. I went to the Apple store and they replaced it with a new one. The guy at the Genius Bar said the SMC update was only for MacBooks and that the L-shaped adapters should work with MacBook Pros.

  • After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

    Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

    - Check to see if there is a firmware update for the theater system
    Sometimes this works but sometimes an IOS update breaks compatibility.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Firmware update failed hdd not recognizing now

    my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

    The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

  • Mac Pro EFI Firmware Update 1.1 Not installing after restart

    I've been trying to get this Firmware update installed for a month now, but every time I restart it just comes back to the screen with instructions. I've tried holding the power button down until after it blinks, until the beep, while it's blinking, after the beep- and nothing seems to work so I just hit cancel and give up on the update. I've seen others have had this problem but responses say just to hold it down for 5 seconds, but that doesn't work. Are there any other solutions?

    One solution might be that the firmware update is for a MacPro and you show having a G5.

Maybe you are looking for