AES support for SRA Gateway

Is it available an AES256 encryption support for the SRA Gateway Service?
Otherwise, is it possible to plug-in a custom/self-made cipher?
Finally (this is an RFE) it will be interesting if the Gateway could do the encryption job by using openssl APIs instead of the NSS ones, so that one could use his own openssl-based engine.

Hi Walt, thank you for the feedback and for using the Remote Desktop app.
We look at the user feedback in the Store and other site and know how important Gateway is to Remote Desktop, notably so on a phone.
This is on our list of scenarios to enable, look for it in a future update later this year.
Thanks,
David Belanger
This post is "AS IS" and confers no rights.

Similar Messages

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

GroupWise 7.0 API Gateway is supported for Exchange 2007?

Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
I found a note in a guide that stated it was not YET supported as of 1/27/2008.

bwalker2,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2?
Thanks,

DES is disabled by default on 2008, could this DC be a Windows 2003? If so then this would be the expected encyption.
The following is the list of the encryption available for each Windows system
Windows 2000, XP,Windows Server 2003:
DES, RC4
         Vista
, Windows Server 2008:      DES, RC4,AES
         Windows 7 and Windows Server 2008 R2:     DES(disabled by default), RC4,AES
From:
http://blogs.msdn.com/b/openspecification/archive/2010/11/17/encryption-type-selection-in-kerberos-exchanges.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Nomachine NX/FreeNX, can't get 3D accelearation support for Virtualbox

Greetings to everyone!
I have a problem, which hopefuly someone knows how to solve?
I've installed everything I needed for one small headless testing server based on Arch linux (x64, kernel 2.6.32 and X.Org X Server 1.7.3.902 (1.7.4 RC 2)), and have setup only basic stuff and services (I've attached rc.conf file)
In addition I've setup also a desktop enviroment based on LXDE (in case of problems but it's stared manualy only when need and by NXclient or ssh -X), NVIDIA drivers (v. 190.53), VirtualBox 3.1.2 and VMWare Server 2.0.2 (x64).
When I'm working directly on computer everything is working just fine and I have support for hardware acceleration in Virtualbox, but when I try to use it from remote location (eg. using NX client, or using X forwarding over SSH), I can't get access to 3D features of VirtualBox (3D acceleration and 2D acceleration buttons are greyed out!), also when I try to access NVIDIA settings panel it says "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." Well I'm pretty sure I have drivers installed, but is there any chance they are badly configured?
I really Arch linux and would like use it as my main distro and really would like if someone can help me find a solution for this problem, (especially knowing that the same things IS working on my second and much older computer based on Intel Pentium 4 (2.0 Ghz), ASUS P4B533 Asus GF4 MX440 graphic card Ubuntu 8.04.3 LTS), and that it's a bit frustrating
The newer computer is based on AMD Athlon II X2 240, Gigabyte MA770-UD3, and Gigabyte 7300GS graphic card.
I've tried so many tutorials, many found on this forum, tried with different GUI (KDE, GNOME, LXDE) in case i "skipped" something and nothing helped me..
Checked everything (I know) twice and even more, but no success.
Is there some way to use hardware acceleration over remote sessions , am I missing something or is "the resistance futile" ?
I'm sending my rc.conf, xorg.conf file, so if someone has more expirience with it?
Thank you.
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="hr_HR.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Zagreb"
KEYMAP="croat"
CONSOLEFONT="lat2-16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt vboxnetadp fuse)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="kiklop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal network netfs crond @openntpd sshd cpufreq sensors @samba @smbnetfs @proftpd @vmware @ddclient @webmin)
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
# Load "dri"
# Load "dri2"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "True"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G71 [GeForce 7300 GS]"
BusID "PCI:1:0:0"
# Option "UseFBDev" "true"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "True"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "RegistryDwords" "PerfLevelSrc=0x3333"
Option "RegistryDwords" "PowerMizerLevelAC=0x3"
Option "OnDemandVBlankInterrupts" "True"
Option "Coolbits" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Greetings to you all from Zagreb (Croatia)

The thing is I don't have any problem when I'm working in front of computer, only when using remote sessions (like NX, VNC, etc.).
I can install additions, but I can't select 3D acceleration checkbox (it is disabled - grayed out) in Virtualbox, or use any graphic hardware advanced feature on computer when I'm using remote session, but it's enabled when using local session.
Even when I try (when connected over NX) commands like glxinfo | grep render
it says something like "not using direct rendering", looks like it's not even using nvidia driver, output show mesa driver is in use?
Could it be something with remote access, remote access rights or something like that?
During installations was following mostly tutorials from Arch Wiki.
Maybe I missconfigured something, or didn't configured at all?

SRA Gateway and short URL's

Is it possible to configure SRA Gateway so it redirect external requests with "short" urls to internal portal?
https://gateway.abc.lt/banklogin.do -> https://gateway.abc.lt/http://psrv1.abc.lan:8080/banklogin.do
Can it be achieved using additional Rewriter RuleSet or I have to configure a web proxy?
Reason is, customers has been using these URL's for a while. We migrating from a configuration where loadbalancers used to hit portal server directly and there a bunch of URL with /serverlet.do form.
Any help is appreciated.
-Saul

Hey sorry to jump in on this, but you mentioned the Re=Write module for IIS. I was a little confused. Do you download this extension to you local desktop? or to your remote hosting server?. I have IIS on my machine, but at the moment have it disabled due to running WAMP as well. I know how to configure WAMP to run on a different port, but if this extension goes on my remote server, I wouldnt have to do that. Thanks for any advice!

SRA gateway - performance problems

Hi!
I'm experiencing slow response with SRA gateway when I stress the home page in a site www.example.com. I redirected the SRA default home page to a custom application home page.
In my deployment, I have one machine with SRA 2005Q1 and my application is running in another machine with Application Server 7 EE UR4.
I stressed the application with two tools: Jmeter and Pureload, getting the same results. I put only one worker, 1 thread and 20 iterations, so it's a very low load for the response that I'm getting.
When I test the application directly, without SRA, I get a very good average response of about 300ms, but when I test the application with SRA gateway protecting the application, I get an average response from 12 to 16 seconds!
I followed all SUN tuning recomendations and ran the perftune script and still got the same results.
When I execute the stress tests, the processor has a load of 4% and the memory usage is 14%.
After analyzing the results I noticed that the main page loads quickly but the average load time of the images is very high. I searched in sunsolve for similar problems with SRA slow loading of images and static content, but I didn't find anything.
Anyone has the same problem? any ideas how to solve it? where can I find more documentation?
thx in advance. Hjuarez :)

Hi There.
First off, I'd do a few things, what's your threadpool set to? default is 200, i'd bump this to 500.
Honestly, I'd test it with NO TUNING, (method of my madness) IE your 'gateway' script CMD variables, Just modify the min and max memory setting, default is 64 and 128, i'd set it to 128 and 1024-2048, and remove all over tuning suggestions (unless you have GC monitoring variables.
my portal system get's 220,000 logins a month, and my gateway is a 280R 2x900mhz sparc 3 system, and it's extremely fast (well, as fast as the gateway goes anyhow :-) )
- I'd be interested to see your results, I have 2004Q2 on my system. there's various other factors in play here, but I tried a 'tuned' gateway, and it was 25-30 % slower then 'untuned' and i've been running my gateway with this minimal tuning since oct 05. I've had no stability problems.
in your amconsole gateway setup area, do you have persistent connections on or off? on=faster throughput, but on my system cause JSS/NSS issues, and gateway coredumps, so it's off right now.
Dave
PS how is jmeter and pureload working for you?

PGP Support for BlackBerry Update

Hi,
Are there any plans, dates or details for an update to the PGP Support for Blackberry package?
Also, what is the process for logging & tracking feature requests relating to this package?
The particular feature we desperately want to see is:
To give a user the ability to send an encrypted e-mail with attachments from a BlackBerry device that is operating the PGP Support for BlackBerry package.
Currently the package can receive (decrypt) emails with attachments and only send (encrypt) emails without attachments. There is no workaround for this and it is a mayor limitation of the PGP Support for BlackBerry package. It is holding back the package from being rolled out to a larger market audience, and limiting existing users tremendously.
This feature request has now been logged with Symantec:
https://www-secure.symantec.com/connect/ideas/pgp-support-blackberry-encrypted-e-mail-attachments
and emailed to [email protected]
Any advice, comments or thoughts are welcomed.
Thanks,

I too would love to see this update! I feel most of RIM's resources are probably being put into getting BB 10 and infrastructure ready for launch?
My workaround for this issue is to install the SMIME support package and have users send encrypted attachments via SMIME. PGP support package has been updated to work with the SMIME package (to a degree). It automatically looks up certificates attached to the PGP users keys and encrypts and decrypts based on those public/private certificates.
Unfortunely the SMIME package isnt as user friendly, users contantly have to hit the blackberry button and then more or more all to load the entire message for longer messages and messages with attachments.
So far I can't seem to get AES Encryption working with the SMIME support package, only have managed to get 3DES and a few other inferior encryption algoriths to work with the SMIME package.

Is vmware supported for production environment ?

Hi All,
Is vmware supported for production environment ?
Thanks
Sunny

All,
I'm glad someone has outlined the clear support statement that has existed for sometime between VMware - SAP. For those of you still running on Oracle, here is some good news:
Wording towards SAP Customers requesting support:
"Oracle, VMware and SAP are working collaboratively to ensure support for SAP customers that use VMware virtualization for SAP solutions running Oracle DB. Functional tests are currently being performed to verify supportability of the SAP&Oracle stack. Details will be made available in SAP note 1173954 u201CSupport of Oracle for VMwareu201D after tests have been completed. It is expected that in Q1 2010, ESX 3.5 and later releases including vSphere 4 will be supported by Oracle and SAP according to Oracleu2019s metalink note 249212."
There is no reason why x86 platform today cannot run the most demanding workloads on VMware vSphere in a production environment. But has noted earlier, don't get hung up on "production" - you have heaps of TestDev, SolMan TestDev, sandboxes, gateways, application servers etc that should immediately by put into a VM - once you are comfortable with your solution in-house, I'm sure you will move production instances into a VM as well.
Below are some great resources for you to use in your quest to virtualize SAP on VMware:
Additional Resources
SAP Notes (for Windows platform)
674851: Virtualization on Windows
1104578: Virtualization on Windows: Enhanced Monitoring
1056052: Windows: VMware ESX Server 3.x or vSphere configuration guidelines
1260719: Detailed virtualization data using saposcol
SAP Notes (for Linux platform)
1122388 u2013 Linux: VMware ESX Server 3.x or vSphere configuration guidelines
1122387 u2013 Linux: Supported Virtualization technologies with SAP
171356 u2013 Virtualization on Linux: Essential information
SAP, VMware (and other) benchmarks
http://www.sap.com/solutions/benchmark/sd2tier.epx
Introductory document u201CVirtualizing SAP applications on Windowsu201D by SAP
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70f63258-bff1-2a10-9db6-
cda6ef202bfc
VMware and SAP
White Papers, Success Stories, Webinars, Links, etc.
http://www.vmware.com/sap
SAP VMware Blog
http://communities.vmware.com/blogs/SAPsolutions
Regards,
Andre Kemp
VMware Sr. Product Marketing Manager - Asia Pacific
Certified mySAP 2K and Migration Consultant
Edited by: Andre Kemp on Dec 10, 2009 9:00 AM

IPS license for SA540 gateway

Hi
We have just purchased a license L-PL-GW-100MAX-3= ProtectLink Gateway: Unlimited Web + 100 Max Email Seats,3YR
I found that it does not include IPS license. I cannot find anywhere where I can purchase an IPS license for SA540 gateway. It seems to be available only as a bundled product when purchasing the hardware. Can anyone help please?
Cheers
Paul

Hi Paul, for your concern, Can you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Help needed setting up WebUI for Wireless Gateway

I have a problem setting up a webUI for my demo project.
I am just doing a simple WSN application measuring temperature on a WSN-3121 thermocouple node, and logging it on a wireless RT gateway NI 9792.
Then I wanted to create a web UI for it, and display whats in the gateway's UI - see project.
SO I'm coming up stuck with the web UI. I've tried reading as much as I can but I still dont know what I'm doing wrong.
As far as I can see, I need to create a web service in the build specs for my gateway, and place the gateway_main.vi as the vi to use. Then build it, and deploy it. Once that has happened and I run the vi on the gateway, I created a webUI as shown in the pic, where it imports the web service from the gateway using 192.168.0.16:8080 - that works fine.
When I run the webUI, it just sits there and times out.
I am using LAbview 2010. Please help.
Solved!
Go to Solution.
Attachments:
Straight Temperature Monitor.zip ‏2152 KB
webUIsetup.jpg ‏75 KB

Hello markza,
Your approach to using Web UI Builder and understanding its use case is exactly right, the issue lies in the web service you have deployed. The VI you are building as a web service, i.e. gateway_main.vi, has while loops in it and hence cannot be used as a web service. The reason for the timeout is that your UI Builder app is calling the LV2010 web service and is getting stuck there waiting for the while loops to complete. Also, the cluster datatype is not supported in Web UI Builder so you would have to break up the Wireless Node Sampling Time input into two separate numeric inputs.
I would recommend creating a subVI out of your code inside the inner while loop in gateway_main.vi. This subVI should have two numeric inputs to replace the cluster (as mentioned above) and not have either of the Start or Stop boolean inputs. Outputs would stay the same i.e. two doubles and a boolean.
Let me know if that helps you and if you have any further questions.
Thanks!
Diya Jakkidi
LabVIEW Web UI Builder R&D

AES support in SunJCE

Hi,
Does anyone know when SunJCE will support AES. I tried to experiment with 1.4.2 version and didnt see any support. However IBM JCE ( comes with the 1.4.2 version) seems to have support for it.
Thanks.
Sunitha.

sorry!
Actually, I was trying out with 1.4.1 jvm and hence AES wasnt working.
However, sun jce in 1.4.2 AES is supported.
Sunitha.

IPod Reset Utility is not supported for use with Windows Vista??????

is there anyway to get pass this?
i need to use the ipod resetutility to reset my shuffle
but the only problem is that i have Vista and the program isnt
supported for vista. can someone help me out here?

well the only problem with that is that
everyone i know use vista -.-

Lack of support for Canon G7 and G9. Alternatives?

I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
Best regards,
Kjell Are Refsvik

I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
I don't know much about that cameras, but you may want to investigate.
Message was edited by: rkkwan
Message was edited by: rkkwan

Why no SyncML-support for Harmattan??

I've used SyncML on my N95 with memotoo.com for years. Worked very well. I took it for granted that SyncML would be supported on the N9. But alas, it isn't. I find that really incomprehensible. Worse yet, CalDAV syncing with memotoo doesn't work - I don't know who's to blame for this, but on the desktop it works flawelessly so I do have a suspicion. Even worse: there is no way to sync contacts using CardDAV.
MeeGo (the true MeeGo) has SyncML-support out-of-the-box. And the N9/N950 does have SyncML-support for bluetooth.
Yes, contacts syncing is supported for Ovi. And Google. And Facebook. But I do NOT want to use those services, because of grave privacy risks and because they use yet again some proprietary protocols.
I wonder, what where they thinking at Nokia for NOT supporting some well-known open standards??
(While I'm ranting: why is there ^%@$ Facebook and GTalk-support over XMPP, but no self-defined XMPP account?? Yes, you can add such accounts from the terminal, using mc-tool, but really that's just a kick in the teeth. And where's UPnP/DLNA-support?)

Hey Guys, Did you figure out any way to do PIM sync via SyncML on N9?
I am struggling to get things moving as I come from N8.
N9 just doesnt have any way to sync calendar, tasks with Ovi. Same with Notes.
Best Regards,
Suyog

AES support for SRA Gateway

Similar Messages

Maybe you are looking for