AEX CS3 error {SetOutputWorld called with a world of the wrong size}
I am getting the following message:
After Effects error: internal verification failure, sorry! {SetOutputWorld called with a world of the wrong size}
( 78 :: 4 )
Any suggestions?
Check this:
http://aeerrors.myleniumstuff.de/?p=547
Beyond that, you will have to provide more info on what you actually do. Could be a couple of things from the CoDec issues mention in my collection to outdated plug-ins doing something weird...
Mylenium
Similar Messages
-
I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
I took all my video with my iPhone turned the wrong way. When I view it on my pc it's turned on its side. How can I rotate the video and crop it?
Try plugging it into a computer with iTunes opened. If you see anything that says restore, say no.
Sometimes these issues resolve themselves when you connect the device to iTunes.
What happens when you hold the home and sleep/wake button? I know it doesn't work, but does it shut off at all? -
I am using portal 8.1
was trying to upload a file (.doc) to the repository, and encountered such error.
com.bea.content.RepositoryRuntimeException: Error creating property: file. Please
verify the Property size is within the Repository limits.
TIAHi,
hopefully this may help towards a solution.
Are you using the Loader EJB ?
1) Are you publishing to a root node within the "BEA repository" ?
-> does this work ?
Do you have code that reads something like:
loader.loadDirectory("firstNode");
loader.loadFile("firstNode", myBinaryValue, myBytes, myProperties);
-> Having banged our heads off a lot of walls on this, we think that it is only when you try to publish to a sub-node within the repository that problems appear.
2) Try publishing to a sub-node in this manner:
loader.loadDirectory("firstNode/secondNode"); // Ensure exist in Repository
String contentNodeName = "firstNode/secondNode/myContentNode");
loader.loadFile(contentNodeName, myBinaryValue, myBytes, myProperties);
--- Drop us a line as well as replying to this group (as I don't check daily etc). Myself and a collegue, Niamh Fitzpatrick, have been looking at this. Thanks Niamh.
Hopefully this will work. -
i created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the device is password enabled, Please somebody helpme
If you are talking about the passcode that gains access to the iPad - you will have to restore your iPad in order to unlock it. You will want to use the last computer that you synced with so that you can recover all of your app data, settings, etc. this explains how to restore the iPad. At the end of the process restore from your backup as described.
http://support.apple.com/kb/HT1414
If iTunes will not let you restore that way, you may need to use recovery mode to restore, and you can read about that process here.
http://support.apple.com/kb/ht4097
IF - you are talking about a restrictions pass code that you put on the device to restrict content or downloading apps or something like that - you do not want to restore from the backup - because that backup will contain the passcode that you cannot remember and you will end up where you started. -
Error when calling a popup window in the initial screen of an application
Hi,
I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
SamHi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window(
window_name = 'WINDOW_NAME'
* title =
* close_in_any_case = abap_true
message_display_mode = if_wd_window=>co_msg_display_mode_selected
* close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
default_button = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram -
Problems when calling with Bleu tooth on : the speaker is dead
Whenever I start a call with bleu tooth on and the head set or car is not in reach I don't hear my correspondent.
I have to select loudspeaker and deselect loudspeaker in the iphone before I acually hear my correspondent.
Reset, factory install, sim card..;I have tried them al without succes. Ant suggestions?Hi Jey,
I'm passing parameters to the transaction using "Call Transaction" ,
i'm using the following code :
wa_bdc_data-program = 'XXXX'.
wa_bdc_data-dynpro = '0100'.
wa_bdc_data-dynbegin = 'X'.
APPEND wa_bdc_data TO lt_bdc_data
CLEAR wa_proc_bdc_data.
wa_bdc_data-fnam = 'XXXXXX.'
wa_proc_bdc_data-fval = gs_process-process_type_id.
APPEND wa_bdc_data TO lt_bdc_data.
CLEAR wa_bdc_data wa_proc_bdc_data-fnam = 'XXXXX.'
wa_bdc_data-fval = XXXXXX.
APPEND wa_bdc_data TO lt_bdc_data.
CLEAR wa_bdc_data wa_bdc_data-fnam = 'BDC_OKCODE'.
wa_bdc_data-fval = 'HIDE'.
APPEND wa_bdc_data TO lt_bdc_data.
CALL TRANSACTION 'XXXX' USING lt_bdc_data
MODE 'E' . -
I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.
-
JScrollPane with scrollbar as needed packs to the wrong size.
Hi!
I just noticed a strange problem when packing a JScrollPane with scrollbar policy "as needed" and wondered if it's me or if it is a real bug in Swing.
I create a JFrame with a JScrollPane in it and a JPanel as viewportview. The JPanel (called "stuffPanel") contains a few components which give it a preferred size, and the JScrollPane is set to grow as needed if the window grows. A button in the center of the stuffPanel will invoke pack() on the window when clicked.
Now, if I resize the window such that the JScrollPane can't display the entire stuffPanel, I get scrollbars as expected. If I click the pack button the window correctly resizes to the preferred size (without scrollbars).
On the other hand, if I resize the window to become larger than the preferred size and then click the pack button, the window (and the stuffPanel) is resized to include 17 pixels of extra size around the edges.
Put simply, pack() will resize the JPanel to different sizes depending on whether the scrollbars of the JScrollPane were visible at the time. Note that this only occurs when you're using the "scrollbars as needed" scrollbar policy.
An even more interesting situation occurs if you resize the window to include (for example) only horizontal scrollbars and then packs the window repeatedly...
Code for a Java app which displays the strange behaviour is included below:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TestJScrollPane {
static {
try {
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
catch (Exception e) { }
private JFrame mainWindow;
public TestJScrollPane() {
mainWindow = createMainWindow();
mainWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainWindow.pack();
mainWindow.show();
public JFrame createMainWindow() {
JFrame window = new JFrame("Test of scrollpane");
window.getContentPane().setLayout(new GridBagLayout());
final JPanel stuffPanel = new JPanel();
stuffPanel.setBorder(BorderFactory.createTitledBorder("Collection of stuff"));
stuffPanel.setLayout(new GridBagLayout());
JLabel stuffLabel = new JLabel("A label");
JTextField stuffField = new JTextField(10);
JButton stuffButton = new JButton("Pack the window");
JList listOfStuff = new JList();
listOfStuff.setListData(new String[] {"Fish", "Bird", "Mammal", "Insect", "Spider"});
GridBagConstraints gbc = new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
stuffPanel.add(stuffLabel, gbc);
gbc.gridx = 1;
stuffPanel.add(stuffField, gbc);
gbc.gridy = 1;
gbc.gridx = 0;
gbc.gridwidth = 2;
stuffPanel.add(stuffButton, gbc);
gbc.gridy = 2;
gbc.fill = GridBagConstraints.BOTH;
stuffPanel.add(listOfStuff, gbc);
final JScrollPane scroller = new JScrollPane(JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
scroller.setViewportView(stuffPanel);
gbc = new GridBagConstraints();
gbc.fill = GridBagConstraints.BOTH;
gbc.weightx = 1;
gbc.weighty = 1;
window.getContentPane().add(scroller, gbc);
stuffButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
mainWindow.pack();
System.out.println("Stuff panel size: " + stuffPanel.getSize());
System.out.println("Stuff panel preferred size:" + stuffPanel.getPreferredSize());
System.out.println("Scroller size: " + scroller.getSize());
System.out.println("Scroller preferred size: " + scroller.getPreferredSize());
return window;
public static void main(String[] args) {
new TestJScrollPane();
}Why would the JScrollPane be as big as the entire
frame when you added 800x600 panels on all sides of
it? It's going to be in the center surrounded by
huge panels. Thanks, kablair. However, if you look at the code, these panels are not 800x600 on all sides. The north and south panels only add a combined height of 100, and the east and west panels only add a combined width of 100. so the whole window, minus insets, should be 900x700.
Anyway, i took the advice of the guy above, and that has gotten me much closer. In the bigger app that I'm trying to calculate the size, now I'm only 2 pixels away from the true size, although I can't figure out what I'm forgetting. -
I have connected to my wireless canon printer but it wont let me print from my mac pro. printer comes up with the message that the paper size doesnt match the printer settings. I have tried to change the settings on the printer but that didnt work. can anyone help
Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out! -
Can't make this call with Unlimited World trial?
Trying to make a call to Mexico with +52 and am seeing the insufficient credit message but I just got on the Unlimited World trial.
According to this forum: http://forum.lowyat.net/topic/2175165/all, it seems that Siri is expecting a 7-8 digit phone numbers excluding the country code and area code, so adding an extra "0" digit or two at the back of the phone number may be able to fix your problem. The phone number should still connect correctly. Try that, it works for me in Indonesia where some phone numbers are still 6 digits.
Hindra -
Cannot call with unlimited world subscription
Hi
I have subscribed to Unlimited world subscription and had recently paid the bill for the month.
However, I cannot make a phonecall to Malaysia using the account. The phone keep showing the message insufficient credit. And prompted me to buy credits.
My username is [Removed for privacy].
This is urgent and I need to make important call. Why doesn't Skype have a customer service hotline?
This is so frustrating.
Reply me at [Removed for privacy] once this is fixed.Hello,
I can see that you have tried to call a mobile in Malaysia, this is not included in your Subscription, you can call only landlines.
For more information see this page: What is the Unlimited World subscription?
If my answer was useful, please click on "Accept as Solution" to help others, thank you
Si ma réponse vous a aidé merci de cliquer sur "Accepter comme solution"
Cela pourra surement aider d'autres personnes qui ont le même problème -
Cannot make calls with Unlimited World Subscriptio...
Recently I purchased the Unlimited World Subscription.
After a while, I decided to cancel the subscription.
I was given this message:
"You've cancelled your Unlimited World subscription. You can continue to make calls until it expires on March 2, 2013."
However, I cannot make any calls even though it clearly states that I can until the 2nd of March.
I am utterly confused as to why I cannot receive the services that I paid for. I would like a refund immediately, and if this is not possible, I would like it to be converted into credit.
Please correct this at once.Which country did you call?
If u haven't use your subscription yet, A refund is possible
you are eligible for 24/7 live chat support contact them immediately.
See the link below for more infos
https://support.skype.com/en/faq/FA10656/what-is-live-chat-support -
Call object was called with start date in the previous month
We have a single cycle maintenance plan for 30 days.
Shift Factor Late Compl. : 100%
Tolerance : 10%
Shift Factor Early Compl. : 100%
Tolerance : 10%
Cycle modification factor: 1
Factory calendar : NIL
Call horizon : 100%
Scheduling period : 90 DAY
Scheduling indicator : Time
Call no . 11 was a plan date of 14.08.2009 has completion date 14.08.2009. Schedule type/status has "scheduled complete".
Call no. 12 was called on 13.09.2009 which is in the past.
Can someone explain why the system called the order with a starting date in the previuos month , that is , 13.09.2009.
And how to rectify it to make it current date for the next call object?
Thanks,
ManoharI checked the algorithm for call no. 12
Start of Cycle 07.08.2008
Last planned date 14.08.2009
Compl.Predecess 14.08.2009 Absolute shift + 0 Da
Planned cycle/offset + 30 Da Relative shift 0 % = 0 Da
Shift + 0 Da erance value 0 % = 0 Da
Planned Dates Due 13.09.2009 Completed on
Last call on 15.10.2009 Called by IP1020091015
Workorder generated has start date 13.09.2009.
Should we restart this plan , as the start dates in call object are at least 1 month old ?
Thanks,
Manohar -
TNS Ora-12532 error When connecting with Db11 running in the VM
I created a virtual machine from the PVM Entrerprise Linux 5 64 bits and db11g.
Inside the virtual Machine the sqlplus system/manager1@VDB11 is working well.
The tnsping 172.20.0.33 is working well too.
But from the other external machine using oracle 11g client these command are not working: Tns Ora-12532 error.
What to do?
Thanksmy virtual machine: vm1 have an static ip address 172.20.0.33
the oracle listener is was configured with the same ip
in the virtual machine : vm1 the /etc/hosts file content is:
127.0.0.1 localhost.localdomain
172.20.0.33 virtualdb11
in the tnsnames.ora file in the virtual machine i have a service:
VDB11 ...( host=172.20.0.33) (port=1521)
under console connection with my virtual machine vm1 the command : sqlplus system/manager1@VDB11 is working well
but when i working in an other external machine , where the tnsnames.ora have an entry:
VDB11 ...(host=172.20.0.33)......
the ping command : ping 172.20.0.33 is working well
but sqlplus system/manager1@VDB11 is not work and return the error:
ora-12532 tns
Maybe you are looking for
-
My ipod nano is not showing up in the left hand column of itunes. It says connected on the ipod and I can find it in my computer but its not there on itunes. I need it as I want to restore it to factory settings. I have tried the troubleshooting meth
-
Settings Badge Still Appearing on Latest Version
I had updated my iPhone 4S to iOS 6.1 awhile back but it has been ticking me off that there is still a badge marked with "1" on the Settings app. Is there a way to get rid of it? I mean I AM on the latest version. So I can't update to fix it.
-
SharePoint Designer: Error when connecting to my customer production server
Every time I try to connect to any SharePoint site running on my customer server I get the following error. An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if authoring against a Web server, please contact the W
-
Dear all, How to fire a default method at the begining of a task flow created from a human task? If I want to store the task parameters to session variables at the begining of a task flow can I use a default method? It will be great if you could furn
-
16:9 HD clip into 4:3 sequence?
Hey guys I've been working with FCE for a few months now and need some help. I've finished editing a HD 16:9 project and it looks great. The thing is I now need to create subsequent shorter videos of the same clips, and they need to be in 4:3, for te