AEX losing connection with AXBS and AU

I see this problem a lot in the forums, and I know how to temporarily fix it, but surely I don't have to keep doing it this way.
I have a AXBS G, and an AEX. The AXBS creates the network for the house and the AEX supplies a feed to the ATV and stereo. About once or twice a week the ATV loses the network. Airport will not show the AEX even after repeated rescans. I can physically move the AEX to the computer room and reset it, but a few days later it loses it again and I have to do it all over again. It's a pain in the tuckush and I can't keep re-doing this.
When it does work it has full signal strength and never did this that I know of before I added the ATV. Just FYI.
Does anyone know why it does it and how to make it stop.
bob
I know how to reset the AEX since I have done 4 or 5 times now. I just don't want to have to keep doing it.

dwwsmp wrote:
Then come daytime my internet is just fine til 830 again each evening.
Will come on and you can go to one page then it goes right back to "local access only" mode.
Unluckily sounds like interference or dirty power causing these problems, dirty power solved by Tripp-Lite Surge Protectors.
Interference like these:
From ScottMac:
Have you notice the occurrances in the context of other events in your home, possibly outside your home, and (really happens) something in a neighbor's house?
A neighbor with a new kilowatt linear for his Ham or CB radio?
Maybe a blinky streetlight?
Any electrically-operated workout gear in your home (or neighbor's)?
Aquariums?
Heating Pads?
Light Dimmers?
Touch-control lamps?
Dusk/Dawn sensors on the porch?
Any new CFL bulbs (OK to be green, as long as you don't watch TV or listen to AM radio ... j/k ...)
From SomeJoe7777:
* Power line interference, such as:
* Fluorescent light ballasts
* High-intensity gas discharge lights like mercury vapor
* Grounding problems, such as improper ground at the NID, the pedestal, etc.
* Electrical system grounding problems, such as improper ground on the RG's outlet, the breaker panel, etc.
* HAM radio broadcasts in the HF band
* AM radio transmissions, such as a nearby radio station
Try to isolate any potential source of these problems and see if you can find one that eliminates the interference.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Similar Messages

  • Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi

    Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi. It has not happened before

    Try restarting or rebooting your iPad. See if that helps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

  • I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

    I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

    Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

  • IC WebClient Connectivity with ICI and Third Party Solution (Genesys)

    <b>Hi Techies,
                 Can any body give the information about the IC WebClient Connectivity with ICI and Third Party Solution (Especially Chat and Mail Configuration with Web Client in CRM). We are using CRM 5.0 server with Java+Abap Engine.  I need configuration for Web Client Genesys(Third Party) with ICI configuration.  I dont have idea regarding this. I 've little idea on Business Communication Broker.  Can any help me out in this regard.   Thanks in an advance. If u have any document it can be acceptable.
    Regds,</b>
    Govinda
    [email protected]

    We are looking for a site to site model. I want all the devices on the remote network to be on their own subnet. We need to be able to hit individual remote devices from the head end. The devices at the remote site in turn also need to be able to communicate with each other without having to use the VPN.

  • TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
    You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

  • JDBC Thin Connections with SSL and client certificates

    Hi ,
    we are going have a look at JDBC Thin Connections with SSL and client certificates.
    I have two questions:
    1. Is it possible to use SSL connections from JDBC Thin Driver and which release of the driver introduced it
    2. Is it possible to use client certificates with JDBC Thin Driver and which release of the driver introduced it
    Thanks for your help
    regards
    Markus Reichert

    I could not reproduce the error after appending the SSL certificate to the certdb.txt file available under $Jinitiator_Home/lib/security folder.
    Steps to add the SSL Certificate:
    1. Run the form with the https mode in the IE Browser.
    2. Security Alert is raised.
    3. Click on the View Certificate button.
    4. In the Certificate Window, click on the Details tab.
    5. Click on the Copy to File button to copy the certificate.
    6. Copy the certificate and append to the certdb.txt file.

  • When you change PC how to make connection with iphone and new PC

    when you change PC how to make connection with iphone and new PC

    Yes, you can do it the same as any other database. The code would be similar.
    I'd also suggest you not to use the JDBC ODBC bridge for connection. There are other drivers available for that.
    Regards
    xH4x0r

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • Regaining Airport connection with WEP and Siemens Gigaset

    After loosing connection with MBP and Macbook and latest security- and Airport updates, reinstalling of IO80211Family.kext vers.1.5.1 helped.
    It's included in Airport Extreme Update 2007 001.
    Extracted it with Pacifist and copied it the Extensions folder.(as root)
    Important!!
    Repairing permissions and reboot.
    Took me two days to find out.
    Maybe it helps for other third party routers too.
    Intel MacMini works with all latest updated. (so far)

    Can anyone talk me though what to do since I know very little about wireless networking. I am quite prepared to buy a new wireless adaptor for the PC, but don't want to buy something that isn't going to work.
    Unfortunately, you didn't provide much information about your PC or the current external wireless adapter to be of much help. WPA was first supported with WinXP w/SP1; which OS is your PC running? Likewise, early versions of wireless adapters only supported WEP. What is the make/model of yours? Does your PC support PC cards, PCI cards (internal), and/or USB devices?

  • My Iphone 5 hang many times. When I connected with itune and restore setting, my phone just start from the activation. But I can't continue the installation. It shows that can't activate right now.

    I had problems with my iphone 5. After hanging many times, I connected with itunes and restored the settings. But it didn't work. And my phone is now starting with "Hello" to newly activate. Again, it could not proceed but saying "cannot activate now".. please help me how to do. Thank you very much.

    you will need to do a hard wipe or remember the password hard wipe can be found on youtube how to. but this will erase all data

  • After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on.

    After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
    Thanks,

    Agathe.texier which copy of InCopy are you downloading and installing?  Do you receive any specific error messages?  Finally what operating system are you using?

  • Iphone is disabled connect with itunes / and i dont wanna lose my data :(

    my iphone is disabled it says connect with itunes / and i reallyyyyy dont wanna lose my data
    i'd do anyyy thing i dont wanna lose it plzz helpp

    It's in recovery mode. Anything on the phone is already gone. If you didn't back it up as you should have been, then the data is permanently lost.

  • TS1538 after download iOS 7.1 when i run iOS 7.0.1 iphons4s i lost connection with itunes and i cant start my iphone?windows 7, 64bit iTunes 11, iphone 4s

    Downloading iOS 7.0.1 when i start intall i lost connection with iphone and iTunes at my windows 7,64bit. now my iTunes dont find my phone and my windows divice manager show Apple Mobile Device (recovery mood) . how can i start my iphone?

    Hello saimunkhan
    Start with trying to put in your iPhone into recovery mode and then plug it in to iTunes and then follow the steps to restore it. If in recovery mode and still not getting anywhere, check with the article that you came from to troubleshoot it further.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

Maybe you are looking for

  • Vendor in GL Accont - payment voucher

    Hi all, There is 2 type of display document view in GL Account General ledger view Data entry view when the document type is KZ than it is vendor account . by default it display general ledger view but when vendor is there than i want data entry view

  • I received an email with an attachment in "Pages." How can I save it in Microsoft Word?

    I am new to Mac.  I have received an email with an attachment in "Pages."  How can I save it in Microsoft Word?  Help!

  • Server Sizing for OCS

    Does anyone / Oracle have a Server Sizing document for OCS and/or individual modules [Files, Email, Calendar etc]. Looking at sizing for 100 users, 1000 users, 3000 users. Thanks Hemant

  • Where are the Oracle Data Binding Frameworks for Oracle Objects?

    Oracle offers a few different options for data-binding frameworks to Oracle relational data. Amongst them they include TopLink and the Oracle Application Development Framework (ADF)in JDeveloper 10G. J2EE also offers the EJB standard framework. Both

  • Xserve Raid - Devicer Removal Error ?!

    Hi ! Can anybody help me ? Whenever I copy some files from my Macintosh HD on my G5 to Xserve Raid 30 seconds after start copy process stops and I get an Device Removal error. I have traid everything and I can't get it right. BTW is my setup ok ? App