Af:inlineframe issue

Hi
We are on Jdev 11.1.4.1. Weblogic Server : 10.3.4.0 We have a custom ADF application running on Weblogic Server. One of the issue I am facing is, I am getting iframe issue after patching Oracle IPM patch in our environment. I have also put FRAME_BUSTING context parameter to never in web.xml file. It doesnt seem to help either.
However I looked at the release notes at the link below for frame busting option and changed it to trinidad security parameter mentioned in the link http://jdevadf.oracle.com/adf-richclient-demo/docs/release-notes.html#New_in_this_Release
Is there any other setting in Weblogic server other then my application where I can check for FRAME_BUSTING settings ?. If so it will be helpful for me if some one gives me direction to check those.
Thanks
Sukarna

Hi Frank,
Some background information
We recently patched our Oracle IPM product. It came with an imaging.ear file. We deployed it in our development and test environment. The test and development sits on same machine with different middleware directoriess. The application runs correctly in Development with out any frame issues. However in test we are getting "Waring: Unable to load content in a frame. Frame content will load at the top level".
This frame is used to open an image from IPM in the image viewer. The test environment never had this issue before until the patch was applied. However the same patch applied in development works fine without any error.
<context-param>
<param-name>org.apache.myfaces.trinidad.security.FRAME_BUSTING</param-name>
<param-value>never</param-value>
</context-param>
<af:inlineFrame id="if1" styleClass="AFStretchWidth"
shortDesc="#{bindings.EspDocTrackerIS01ViewInst.hints.Docurl.tooltip}"
inlineStyle="height:990px"
source="#{bindings.Docurl.inputValue}"/>
Thanks
Sukarna

Similar Messages

Carousel not honoring image size and inlineFrame target issue

I have questions related to slideshow or carousel in the following:
•     “af:inlineFrame”: in the html, it has a “”, looks like it doesn’t work in ADF. Do you have any work around or is this a limitation?
•     “af:carousel”: this component doesn’t honor “<af:image>” dimension and it truncates image into a small square shape. I tried everything I can think of. Do you know if this is a limitation? If so, is there a good solution for this?
For all the cases above, I want to click on the image link and the system redirects to me to a page associated with the image. Usecase is announcements that's animated in a slideshow or carousel.
If you have any suggestions I appreciate the help.
Thanks,
Dara

Dara,
Can you try surrounding af:image with af:goLink / af:commandLink and set the inline style of it to inherit?
Something like
                                <af:carousel id="c1" var="item">
                                    <f:facet name="nodeStamp">
                                        <af:carouselItem id="ci1" inlineStyle="background-color:inherit;"
                                                         styleClass="AFStretchWidth">
                                            <af:commandLink id="l1">
                                                <af:image id="i2" inlineStyle="height:inherit; width:inherit;"
                                                          styleClass="AFStretchWidth"/>
                                            </af:commandLink>
                                        </af:carouselItem>
                                    </f:facet>
                                </af:carousel>-Arun

Oracle-ADF inlineFrame initializing view scoped bean twice

I am facing strange issue related with af:inlineFrame component. Trying to display/render ADF page inside of af:popup within af:inlineFrame component. The weird thing is when the popup displayed; view scoped bean's @PostConstruct method called twice. That means bean is initialized twice. However it needed to be initialized once since bean is referenced from the page that is going to be displayed inside af:inlineFrame.
Correct flow gotta be:
Click to button openPopup() method called.
openPopup() sets URI then opens popup.
inlineFrame source property set as it's going to display framePage.jspx.
JSF scans framePage.jspx code finds out there is a reference to FrameBean inside af:outputLabel
Construct FrameBean then call @PostConstruct method.
Call appropriate getter and render page.
What happens in my case:
Click to button openPopup() method called.
openPopup() sets URI opens popup.
inlineFrame source property set as it's going to display framePage.jspx.
JSF scans framePage.jspx code finds out there is a reference to FrameBean inside af:outputLabel
Construct FrameBean then call @PostConstruct method.
Call appropriate getter and render page.
Construct FrameBean then call @PostConstruct method.
Call appropriate getter and render page.
Popup located like:
<af:popup id="mainPopup" binding="#{mainBean.mainPopup}">
<af:dialog id="mainDialog">
<af:inlineFrame source="#{mainBean.URI}"> </af:inlineFrame>
</af:dialog>
</af:popup>
Showing popup via af:button action="#{mainBean.openPopup}":
public void openPopup() {
this.setURI("http://localhost:7001/app/framePage.jspx");
RichPopup.PopupHints hints = new RichPopup.PopupHints();
this.getMainPopup().show(hints);
framePage.jspx:
<?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <meta http-equiv="X-UA-Compatible" content="IE=edge" /> <jsp:directive.page contentType="text/html;charset=UTF-8" />
<f:view>
<af:document title="Frame Demo" id="demoDocument">
<af:form id="demoForm">
<af:outputLabel value="#{frameBean.commonId}"> </af:outputLabel>
</af:form>
</af:document>
</f:view>
</jsp:root>
FrameBean:
@ManagedBean
@ViewScoped
public class FrameBean {
private String commonId;
@PostConstruct
public void afterInit() { }
public String getCommonId() {
return commonId;
public void setCommonId(String commonId) {
this.commonId = commonId;
Making FrameBean @SessionScoped solves this issue since bean is kept with session but I don't want to keep it within session. Also setting source property of af:inlineFrame in jspx as hardcoded not fixing the problem.

im using ADF Essential on Glassfish 3.1 with no problem, but glassfish is heavyweight. I think Oracle ADF is not dependent to Application Server , then i tried to use my project with Tomcat 7. I deployed my application on Tomcat 7 , but im getting some exceptions.
Not all application servers support Oracle ADF.
Refer the certification matrix, Tomcat 7 is not listed as being supported.
http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html

InlineFrame are not working in IE

Hi All,
On Documents tab we have links which open a PDF file from a folder and displays in inlineFrame.
The inlineFrame is calling a servlet which is returning PDF contents. PDF displays fine in chrome & FF, but on IE we are having issues, instead of PDF it is displaying current jsf page in the inlineFrame.
Thanks in advance
Regards
Vidya

No, that's not what it means at all. If you use Adobe code you will have
problems. If you learn to write the code yourself, you will not have
problems.
As for IE9, it will support media queries unless you have dumped it into
Compatibility View. To prevent that, follow the directions in this forum
post:
http://www.pviiforums.com/topic.php?id=9
"Does that mean that anyone in older versions of any browser can't view
just the desktop version?"
That does not make sense. Old browsers will see the default desktop
version. Outside of old IE versions, old browsers would be statistically
irrelevant. For old versions of IE, depending on your default layout,
you could simply write a conditional comment to serve it a fixed-width
version.
I'm not trying to sell you anything, but look at this page in modern
browsers, and then in older browsers:
http://www.projectseven.com/products/templates/pagepacks/dmm/affinity/affinity-themes/boar droom/layout-3-01.htm
Al Sparber - PVII

Af:inlineFrame and ADF 12.1.3 on IE 8 throws javascript warning "Stack overflow at line: 0"

ADF 12.1.3 and IE 8.
On any page having <af:inlineFrame> IE8 shows a popup warning "Stack overflow at line: 0" on each page load.
It very easy to reproduce creating two pages, adding to the first page <af:inlineFrame id="if1" source="secondpagejsf"/>
I see that IE 8 Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems is not supported any more but there are so many XP with IE still alive on our customers base.
Have anyone found a workaround for the above problem ?
Yiannis

Hi Yiannis,
There is some issue with compatibity of inlineFrame and IE8.
Not sure this can help but try to relate with this solution : http://sanjeev-technology.blogspot.in/2014/11/adf-login-page-keeps-on-coming-back-in.html
Regards,
KP

af:inlineFrame in weblogic 12C

Hi,
I am facing a issue in using the <af:inlineFrame>. The page mentioned in the source is not getting loaded instead the main page is getting loaded. The same code was working fine in 11g.
<af:inlineFrame source="/faces/Oracle/communications/ordermanagement/ui/orchestration.jspx?orderId=#{pageFlowScope.OrderDetailBean.orderKey.orderId}"/>
Any change with respect to inlineFrame in 12C.
Thank You.

Here is some useful information from WLS 12C guide
Development features
WebLogic 12c has support for many IDEs. WebLogic already supports JDeveloper
11.1.1.5, but will come out with 11.1.1.6 later on. However, anyone developing
applications using WLS 11.1.1.5 can deploy them to WLS 12c.

AdfCustomEvent.queue fails from javascript inside af:inlineframe - how to?

Using JDev 11g; have an ADF page with an Inline Frame component which loads a HTML page in the Project which uses some javascript and I want to be able to send a payload back to the ADF application when a client event occurs. I've therefore flagged the Inline Frame as a ClientComponent, and added a ServerListener, then added the AdfCustomEvent.queue call into the frame HTML javascript file using ...
function choosePart(bodyPart) {
console.log("@@ firing choosePart for " + bodyPart);
AdfCustomEvent.queue(AdfPage.PAGE.findComponent("pt1:ifbody"), "bodyPartClicked", {pobCode:bodyPart}, false);
... but it returns:
AdfPage.PAGE is undefined
... to the Firebug Console and doesn't make it to the server-listener. At times, it will complain about AdfCustomEvent is undefined.
My problem seems to be that the HTML/javascript referenced by the Inline Frame doesn't know anything about the ADF context in which it operates. My options then appear to be:
a) add something to the HTML so that it can link back to the ADF context; or call the AdfCustomEvent.queue in a different way that does this
b) use an f:verbatim instead of the af:inlineframe, and load the HTML directly into the ADF page where this context is established. My issue with this is that the HTML doc-type on the rendered ADF page includes the "http://www.w3.org/TR/html4/loose.dtd" specification, which compromises some of the HTML functionality; so to pull this off, I'd have to diagnose/correct here; which I'd rather keep off the critical path at this point.
So wondering if anyone might have worked a), and can describe a solution.
Thanks.

For the record; reading on javascript sorted this out; just needed to use a "parent" prefix, and works fine.
parent.AdfCustomEvent.queue(parent.AdfPage.PAGE.findComponent("pt1:ifbody"), "bodyPartClicked", {pobCode:bodyPart}, false);

InlineFrame problems to show inlinframe IE 8 EI 7

I find an issue with IE 7 and IE 8 to show af:inlineFrame components in Internet Explorer 7 and Internet Explorer 8.
When,
A. I use this for Mozilla and Chrome Browser:
<af:inlineFrame source="http://192.168.1.121:7001/test/faces/faces/pages/Opciones/Solicitudes/RegistrarSolicitud.jsp"
binding="#{backingBeanScope.backing_pages_principal2.if1}"
styleClass="AFLinkIEWorkaround" shortDesc="inlineFrameContenedor"
id="if3" inlineStyle="height:auto;width:801px;" sizing="preferred" />
My pages are ok, because it shows the inlineFrame without the vertical ScrollBar and Horizontal ScrollBar.
but when
B. I use Internet Explorer 7 and Internet Explorer 8.
The inlineFrame show a Vertical ScrollBar and Horizontal ScrollBar
I was finding out, and I Found, some pages to solve this:
http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html
In this page talks about : "AFLinkIEWorkaround"
It allows to work better in IE, but it doesnt work.
Thanks in advance,

Hello,
Yes I try to use the inLineframe for autosizing the pages inside the InLineFrame Component,
But it doesnt work for IE 7 or IE8.
<af:inlineFrame source="#{backingBeanScope.backing_pages_principal2.mstrBeanSourceFrame}"
binding="#{backingBeanScope.backing_pages_principal2.if1}"
styleClass="AFStretchWidth" shortDesc="inlineFrameContenedor"
id="if3" partialTriggers="cml" inlineStyle="height:auto;" sizing="preferred" />
In this http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_inlineFrame.html page says that I have to put inLineFrame
in Strecht Component like panelStretchLayout, panelSplitter. (Geometry Managment)
But it doesnt work I can deal with it because I put the width and height in Pixels but it much better if it works with autosizing into IE 7 and IE 8.
how can I Find the Bug?
There are:
Oracle IE7 bug 8809021 ?
Oracle IE7 bug 9869651 ?
http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html
Thanks in advance,

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Issue in Creation of Periodicals for Contracts in CRM7.0

Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
Dedeepya

Hi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C

Issue in creation of plant related data at receiving server using BD10

Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05                      matmas05
       E1MARAM                        Master material general data (MARA)
           Z1KLART                        KLART----
My extention
           E1MARA1                        Additional Fields for E1MARAM
           E1MAKTM                        Master material short texts (MAKT)
           E1MARCM                        Master material C segment (MARC)
               Z1AUSPM                        E1AUSPMDistribution of Classification:----
My extention
               E1MARC1                        Additional Fields for E1MARCM
               E1MARDM                        Master material warehouse/batch segment (MARD)
               E1MFHMM                        Master material production resource/tool (MFHM)
               E1MPGDM                        Master material product group
               E1MPOPM                        Master material forecast parameter
               E1MPRWM                        Master material forecast value
               E1MVEGM                        Master material total consumption
               E1MVEUM                        Master material unplanned consumption
               E1MKALM                        Master material production version
           E1MARMM                        Master material units of measure (MARM)
           E1MBEWM                        Master material material valuation (MBEW)
           E1MLGNM                        Master material material data per warehouse number (MLGN)
           E1MVKEM                        Master material sales data (MVKE)
           E1MLANM                        Master material tax classification (MLAN)
           E1MTXHM                        Master material long text header
           E1CUCFG                        CU: Configuration data
       E1UPSLINK                      Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

Af:inlineframe issue

Similar Messages

Maybe you are looking for