Af:inputDate - No provision to set the set the current date in the popup
On clicking the icon of the af:inputDate, the pop up is opened with the current month/date/year as the highlighted item. There should be provision to set which date/month/year should be shown as highlighted.
The attached image below makes it more clear.
Can't upload images
Similar Messages
-
Automatically add a current date at the end of the comments
Hi,
I have a form on a table with 5 fields... on one the field I am asking my users to enter comments...
I am looking for a functionality to automatically add a current date at the end of the comments, only when they are updated or newly filled in...
Please advice how can I do it... I am anticipating some sort of a trigger on column (when the data is modified)...
Thanksautomatically add a current date at the end of the comments, only when they are updated or newly filled inDo you want to add the date to the page item itself and hence show it to the end user as and when its changed, thn
Assuming comments item is named '*P1_COMMENTS* , add the following to the "execute on load"
$('P1_COMMENTS').change( function(){
var d = new Date();
$s('P1_COMMENTS', $v('P1_COMMENTS')+ d.toUTCString() );
});If its to be done only when updating ie in the PLSQL block
UPDATE <table name>
SET <comments _column> = ( SELECT DECODE( NVL(<comments _column>,'')
,NVL(:P1_COMMENTS,'')
,<comments _column>
,:P1_COMMENTS||TOCHAR(SYSDATE,'DD-MON-YYY')
FROM DUAL
WHERE <condition> -
How to display the username and current date in OAF page Footer region
Hi,
I need to display the username and Current-Date in footer region.If anybody knows the procedure then please share with me.
Thanks
Divya AgarwalHi,
Read this Thread:--
You have to capture the UserName and Date in the Process Request Method of page Controller and invoke a method which will subsequently get and set the value in some attribute.
String userName = pageContext.getUserName();
How to populate Current Date and Time in OAF page through CO
Thanks
--Anil -
Increment the version and current date in .ver file
Hi All,
I have the version.ver file and it looks like
[version]
BuildDates=2014.10.01
Script=01
MainVersion=1.00.00.00:01
I want to increment the values and current date if i trigger the build using batch script. The output i need is like this
BuildDates=yy.mm.dd (current date)
Script=02
MainVersion=1.00.00.00:02
Thanks in advanceThanks for your reply. This is my script
@echo off>newfile&setlocal enabledelayedexpansion
:: set up your date here. It probably won't match my format so you'll need to adapt:
set dt=%date:~10,4%.%date:~7,2%.%date:~4,2%
for /f "skip=2 tokens=2,3 delims==:" %%a in ("filename") do (
set v= %%b
set v= !v: 0=!
set /a v+=1
set v=0!v!
set v=!v:~-2!
>>newfile echo SCRIPT=!v!
>>newfile echo BuildDates=%dt%
>>newfile echo MajorVersion=%%a:!v!
goto :aa
:aa
more +3 "filename" >> newfile
del "filename"
ren newfile "filename"
Before execute the script my file will be look like:
version]
BuildDates=date
Script=09
MainVersion=3.00.00.00:09
after executing i am getting the output value as
BuildDates=date
Script=01
MainVersion=19:01
MainVersion=3.00.00.00:09 -
I had Adobe FLASH 11 but it did not play any videos, so I was prompted to download the version before it (10.) but it will not let me download it since it is not the latest/most current version of the program. How do I get a version that will actually work?
You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html -
My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?
",the owner sold the ipod without clearing the songs and since the songs were not puchased from the itunes store then i believe i now own the songs"
Not true at all.
It does not matter where the songs came from, they are not yours and the previous owner does not own the right to distribute them to others.
The law is the same with downloads and cds and any other medium. -
My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?
Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy -
ICal still shows previous day in ical proper, but shows current date in the dock
iCal is open in the MONTH, on my desktop permanently, but it continually shows yesterdays date. It isn't till I actually click on the following day in iCal proper that the date changes to the current date. The iCal icon on the dock works fine with no issues. When I first purchased the iMac iCal worked aok. Software is continually updated.
I have the same issue. I am also running iCal 5.0.2 under Lion 10.7.3. It worked fine for me on Lion 10.7.2, and it still works ok for me on my iPhone 4 running iOS 5.1. It does look like a bug to me. I have the issue connecting to a Google Calendar as well as to another (non-Apple) CalDAV server.
Let me know if you call Apple Support to report this issue. -
Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?
The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics -
In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .
Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish -
<rant>I have seen many people complaining about this. I've seen lots of suggestions; change your POP3 SSL number, twist your knee backwards whilst standing on just your little finger. Nothing works. I'd like to not have to migrate to a new Mail software.
</rant>
I thank you.
<Edited by Host>MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue. -
Hi, since this morning i receive this message on my Mac Air (10.8.5) when i open iCal (which is synced through iCloud): "The server responded with an error. The server is currently unreachable or the connection was blocked". You know what it can be?
Thanks for your help!Are you behind a firewall at work or elsewhere? Does you calendar sync with some other system like google (could be the google server is not responding)? All we know from the message is that your mac cannot reach the server. Maybe try later. Are you using wifi or have an ethernet connection to the router?
-
How to process data in the past based from data in the present
hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi 16 KB
weight.txt 1 KB
data .txt 1 KBHi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir. -
Hi Experts,
I want to display current date in the query in one of the time characterstic which i am including in the data target but i don't want to load anything in the data target but still i want to display the current date in the query only.
how can i achieve this.
thanks and regardsHi,
It's a real fcahllenge or a non ABAPer.You have to create a project in cmod and to assign enhancement RSR00002.
In component EXIT_SAPMRSRU_001 you will find a couple of includes.
Please add attached code. Replace YOURCUBE by the name of your info provider and YOURIO by the name of desired info object.
*& Include ZXRSRTOP
DATA: G_POS_YOURCUBE_ YOURIO TYPE I.
*& Include ZXRSRU02
DATA: L_S_CHANM TYPE RRKE_S_CHANM.
DATA: L_SUBRC1 TYPE SY-SUBRC. "execute only, if key figure really used
CASE I_S_RKB1D-INFOCUBE.
WHEN 'YOURCUBE'.
L_S_CHANM-CHANM = 'YOURIO'.
L_S_CHANM-MODE = RRKE_C_MODE-NO_SELECTION.
APPEND L_S_CHANM TO E_T_CHANM.
ENDCASE.
*& Include ZXRSRZZZ
FORM USER_YOURCUBE USING I_S_RKB1D TYPE RSR_S_RKB1D
CHANGING C_S_DATA TYPE ANY.
FIELD-SYMBOLS <L_YOURIO>.
ASSIGN COMPONENT G_POS_YOURCUBE_YOURIO OF STRUCTURE C_S_DATA TO <L_YOURIO >.
<L_YOURIO >.= SY-DATUM.
ENDFRORM.
Hope it works.
Good Luck
Joe -
How to display the current date in the prompt value.
Hi,
How to display the current date in the prompt value. When the user runs the query he want the current date to be displayed in the prompt value and he should also be able to change the date if required ...... I am using web Intellegency BO XI3.0.
Thanks,
Shakthi.Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari -
Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
Maybe you are looking for
-
When I was working on my G mail account , Mail quit and I can no longer re-open it ! Each time I try and open mail I get this message: The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windo
-
What recourse do I have if I contacted the OC for a pfd and the agreement was that if I paid them directly they would recall the debt and the collection would be removed from my credit report. But, after the debt was paid I called when the item was u
-
Substr and instr for long column
Plesae need support ,how can use instr and substr function for column with long datatype select substr(rec,1,(instr(rec,'?',1))) from F_DE_O_HISTORY_QUEUE_PRE_TST2 rec column is long,When execute this select message displayed as ORA-00932: inconsiste
-
Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering. I changed my email password some time ago and forgot that I had done so. I
-
FCP XML Effects in Audition CS5.5
Through a very long series of circumstances, I have an XML file and multiple OMF files of a film's audio. The editor is based out of LA and I am on the east coast and communication has been...difficult at the best. Essentially I am very ready for thi