Af:inputDate that shows and picks only time

Hello everyone.
I'm using jdev 12.1.3
In an af:inputDate component I have specified the type (in the converter) to be time.
So, the user sees in the display only time.
In the ui, next to the af:inputDate field there is always the date and time picker.
Is it possible the picker to display only the time and not both date and time?
I mean, since the user is interested only in time, what's the point of showing the date in the picker?
Is there a declarative way to do this? (or it can be tackled through css only?)
Thanks a lot
~apostolos

Thanks a lot Timo.
Actually I'm looking for something fast now (in terms of implementation) and see in the future the declarative comp way you suggested...
apostolos

Similar Messages

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

My macbook crashed about two weeks ago and I had icloud already set up. How do I go about retrieving the music and images? Please, help me. I had over 10gb of music on that computer and the only place it was backup was icloud. Thanks.

My macbook crashed about two weeks ago and I had icloud already set up. How do I go about retrieving the music and images? Please, help me. I had over 10gb of music on that computer and the only place it was backup was icloud. Thanks.

I hate to say this, but unless you are paying the 25 bucks you cannot back up your library to the cloud.
All you can do is back up the items you "purchased" from Apple.
iTunes Match
For $24.99/year you’ll get access to all your iTunesmusic including tunes you ripped from CDs or “borrowed” from anonymous friends. It scans your library to see if the song exists in iTunes’ 18 million song catalog and if it does it’ll stream it to you at 256 kbps. If your song is not in iTunes then it’ll be uploaded to iCloud at whatever rate it is on your device where it can be streamed for your listening pleasure. I cannot find any information on how to restore a library, however
Best of luck

Is there a way to create a Smart Mailbox that shows Sent emails only?

Hi there,
I am trying to find a way to create a smart mailbox that only shows emails I have sent.
If I receive 20 emails today, 10 yesterday say, I have a Smart MB where I have set up emails received today, another SMB for emails received yesterday and another SMB for emails I've received in the past week. I can very easily see what has come in during the last few days or whatever.
What I also have are rules that move all emails received and sent to specific folders. The idea is that I will have nothing in my INBOX. The problem is that although it's easy to set up views to see what emails I've received on any day using the calendar option, I can't see a way of doing this to see what emails I've sent.
So, if I receive 20 emails today and I replied to 3 of them, those 3 will get sent to whatever folder I've allocated for them - I put all emails TO/FROM in one folder for each email address. This way I don't have 2 email folders TO and SENT for each recipient.
My problem is that I want to ONLY look at what I've sent today or maybe yesterday etc. if I can set things up the same way as receiving emails, But I can't seem to do this.
Seems strange that there are options to see filter out what's coming in but not what is being sent! But if there's a way to do this, it would be appreciated.
Regards,
Maz

Mail creates a Sent mail folder automatically when you set up an account. All your sent mails are kept there. You configure how it saves your sent mail here:
You should see the mailbox in Mail's sidebar:

How to create stack bar chart on answers that shows % and counts?

Hello guys
I currently have a table that have several columns, each column represent one product name, and one column name "units" indicating how each product is sold...
The requirement is to create a chart view with stack bar that shows the percentage of each product''s unit sales.
Now we are discussing whether we should customize the table to consolidate all these product columns into one "product desc" column with all the product names as row in order to fulfill this requirement..
PLease let me know whether this is needed or not... ALso, how would I be able to create stack bar charts that shows the total sales against each product sales in percentage and counts?
Please let me know, I really appreciate it

I tried to do this and was a bit successful. I used the paint catalog. Created a a request with 6 columns assuming units and dollars be stacked and Year ago units to be a line:
Brand Units Dollars 0 Year_Ago_units 1
Added a new request (Combined with similar request and selected paint subject area): Now in this request my columns are:
Brand 0 0 Year_Ago_Dollars Year_Ago_units 2
Assuming Year_Ago_Dollars be standard in your case.
Created a chart view with brand and 1 on x axis and Units, Dollars, Year_Ago_Dollars on y axis and line as Year_Ago_units.
Now able to see what I am expecting. May be you need to tweak a bit more according to your requirement.
Let me know if this is of any help!
Thanks.
Edited by: Venkata on Sep 30, 2010 12:11 PM

To eliminate date and extract only time component

hi i am getting an input from a table which is of varchar2 type and the field has data like
8:00 am-8:00 pm
now i want to insert 8:00 am as start_time and 8:00 pm as end time in the columns start_time and end_time in another table.the 2 columns are of date type.
HOW do i remove the date and just insert time in these columns
because if i do
insert into..
to_date(substr(peak_time,1,7),'hh:mi am') ......
then along with time current date gets appended.

to be honest? If that was the requirement (eg. scheduling items to run between two times), I'd store it as numbers - probably as minutes. - eg. 8 hours = 8*60 minutes
Then I'd do something like:
select my_date + start_time_in_mins/1440 from my_table

I'm missing a song in my main library that shows and plays from recently ad

I just imported the Stones 'Shine a Light' CD and one of the songs shows and plays from the "recently added" list but doesn't show or play in the main library.
Anybody know what's up with that?

You could also select the song in the Recently Added playlist, control-click it and select "Show in Playlist" and choose Music. It will show you where the song is in your library. Perhaps the track has a guest artist on it and you need to alter the ID tags so that it will sort with the rest of your album.

TS1702 I tried to purchase cityville hometown cash and it did not download. it said error try again later. I did that again and again 5 times. Now i got charged 5 times for something i didn't get! How do i tell apple to refund my money?

How do i contact apple to refund my money? I tried to purchase cityville hometown cash and it did not download. It said error try again later, so i did that. I tried 5 times to buy cash for $13.99 and no download. My account was charged 5 times for something i didn't get. I contacted zynga and they said itunes at apple store can help. I tried apple support, nothing. Why is it so difficult to get a refund when you play these games? Makes me not want to play anymore! Please help!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Print Preview shows (and prints) only a portion of a page,

Not the printer's fault - it prints what Print Preview sends it (about half a page).

There's a couple of old Bugs ''(over 8 years old)'' in Firefox that can cause that to happen with some web pages. One Bug was recently fixed for Firefox 4.0b8, but it doesn't look like it will be applied to Firefox 3.6.x versions.
There may be a workaround you could apply for a specific domain via a Stylish script, but we'd need the URL of that page and a screen shot of the Print Preview window to try to help you fix it.

I used to be able to go back multiple pages at once, by selecting what page I wanted to go to by the back button. Now I apparently don't have that option and can only go back one page at a time? Am I mistaken, and is there a way to do this?

I miss the old back button, when I could go back multiple pages at a time.

You can also:
*right-click the Back/Forward button for the drop-down
*add this extension to add the drop-marker to the Back/Forward button: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
 
 
'''You need to update the following:'''
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers (''version 1.6.0_25 is available for download, but can not be updated using manual update yet'')
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Making a slide show and can only see the top 1/4 of the bottem line of photos in the project. help?

I am working with beat markers and it was going along fine until suddenly everything went awry. I dropped in a bunch of photos and the last photo assigned itself a time of over 3 minutes. Beat markers are at less than 1 second. I have removed the beat markers for the photos I want to remove, in order to try again. When I try to delete the 3 minute picture the entire project loses its beat markers AND on top of all of that, I can only see the top 1/4 of the pics in the bottom line of the project. I've tried several work arounds and can't fix this. Anyone have suggestions?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode". 
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

My phone said searching, advised to download update, after that shows itunes prompt only

update failed now shows itunes hookup symbol

Your phone was hacked to be used with your carrier and was NOT legitimately unlocked. Updating your phone as re-locked it to the rightful carrier.
Only the carrier can authorize an unlock. You cannot use that phone again unless you get the original carrier to unlock the phone. Not all carriers do this.

My sound is gone and the only time it comes is when i use a speaker

my sound does not work the keys do not work too

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
     Make sure that no box is checked under “Mute”.

How can I create an aging summary that shows unreconciled transactions only.

Please help experts!!

Duplicate Thread...
How can I create this aging summery in System Currency. Currently it shows Local Currency.
SELECT distinct T0.[DocNum], T0.[DocDate], T0.[CardCode]"Customer Code", T0.[CardName], t0.doctotal"Total Payment", T0.[PayNoDoc]"payment on account", isnull(t0.openbal, '0')"Not reconciled", t0.nodocsum"Total before partial reconcile", t0.nodocsum-t0.openbal as 'Reconcile Amount'
DocTotalSy TotalpaymentSC,OpenBalSc as NotReconciledSC ,NoDocSumSy as "Total before partial reconcile SC"
FROM [dbo].[ORCT] T0 left JOIN RCT2 T1 ON T0.Docnum = T1.DocNum WHERE T0.[PayNoDoc] = 'y' and isnull(t0.openbal,'0') <> '0' and t0.doctype = 'c'
Regards,
Kennedy

Af:inputDate that shows and picks only time

Similar Messages

Maybe you are looking for