af:pangelGroupLayout shows borders where it should not.

I have put the homepage banner and its top links such as company information, site help, contact us links (af:golink) under one af:panelGroupLayout container.
The problem is when I go to "Preview in Browser" it shows the surrounding borders around panel group layout.
I would like to make this border invisible.
Below is the code snippet.
<af:panelGroupLayout layout="horizontal" halign="right" visible="false"
inlineStyle="width:1037px; height:53px;">
Thanks,
Ruchir

The border in af:panelGroupLayout is shown when only in the 'Preview In Browser' mode.
When you run the actual page containing the af:panelGroupLayout, the border does NOT show up.
i guess, In 'preview in mode', they are showing it to show how exact the various UI page components in the page are placed.
Thanks,
Navaneeth

Similar Messages

  • My phone shows extended where it should show Verizon

    My phone started showing extended where Verizon should be I have not left the county where my phone is registered. I have restored my phone and its network settings. I went to Verizon and they actually sent me a warranty phone and it still says extended. I know its not a big deal but it bugs me and if it cant be fixed I just want to know what is causing the issue. It just started a couple weeks ago.

        I'm sorry to learn that your phone continues to display an extended network, mitchellpalles. I would like to review your account to ensure you are provisioned correctly. I have sent you a direct message here. Please reply to my message for further assistance.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • My mac mini is running slow.  Bought it in 2009.  Activity monitor shows nothing running that should not be.  Someone suggested it might be my operating system?  Check for software updates, and I am current.  Suggestions?

    My mac mini is running slow.  Bought it in 2009.  Activity monitor shows nothing running that should not be.  Someone suggested it might be my operating system?  Check for software updates, and I am current.  Suggestions?

    Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

  • HT1349 Need serial number and it is not showing up where it should be...

    my iphone was lost (or stolen) and i need the serial number and IMEI number in order to report it to insurance company. However, when i go into itunes (10) and click on devices (as instructed), my iphone shows up  in the list of devices...but when i "hover" over it  with the arrow, ONLY my phone # appears. No other #s. Why? Could it be because I has the phone service interrupted? Or could it be that someone stole the phone and wiped it?  It no longer shows up on my list of devices in icloud "find my iphone". 
    please help! thank you.

    Hi Modular747,
    Thanks for your question...I sure thought I had backed it up on itunes. In the "device" list under "preferences", it does show one back up for this phone  -- and when I "hover" my mouse over the back up, the phone number appears...but not the IMEI number (and not the serial number).
    Apparently I cannot report my phone lost or stolen without the IMEI number and I am at a loss as to how to find it on itunes.  I don't have the packaging or invoice with me. I cannot figure out WHY the phone number appears and the other numbers do not. AT&T keeps telling me that the IMEI number must be there...but I just cant find it.
    I also am confused as to why AT&T can't use the serial number to find the IMEI number.
    Thanks for any further thoughts or suggestions.

  • Song stopping where it should not

    I brought i song and it stop half way why that ??

    Hi Bex3697,
    Thanks for visiting Apple Support Communities.
    If songs you play on your iPhone are being skipped, first see if this article applies to the situation:
    iPhone and iPod touch: Songs or other audio content are skipped during playback
    http://support.apple.com/kb/TS3159
    If one song skips every time or does not play completely, you can delete the file and download it again using these steps:
    Before you delete, find out if you'll be able to download the song you deleted again (it depends on where you live). To delete a song:
    Tap the Music app.
    Tap the Songs category.
    Swipe left to right over the song you want to delete.
    Tap Delete.
    From:
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Tap Settings > Music and make sure Show All Music is on.
    Tap the Music app.
    Find the item that you want to download.
    Tap the Download icon.
    From:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    If the behavior continues, I recommend the troubleshooting steps in this article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    All the best,
    Jeremy

  • Placed pdf showing "x" where numbers should be

    greetings.
    i'm placing a pdf created by another designer into indesign for printing layout purposes.  the pdf is a magazine - multiple pages  w/ articles, advertisements, etc.
    here's the issue:  some numbers in the ad's (i.e., the company's address, hours of operation, etc.) are not displaying or printing properly.  the numbers look fine when viewing them in acrobat 8 pro, but once placed into indesign, i'm seeing boxes with "x's" inside of them.  this is not happening on all of the advertisements - just a few.  i initially thought it was a font embedding issue, but it's only happening on the numbers, which is confusing to me.
    any thoughts/solutions are greatly appreciated!

    Thanks, Bob.
    I'm not sure.  I receive the pdf from a publishing house.  I would assume they use InDesign to do the layout, but perhaps they use Quark.
    I have yet to go to them for any  info on how they put the pdf together.

  • My adobe digital shows boxes where script should be on Windows 7 Pro, what gives??

    I've reinstalled at least 12 times. It was working just fine then started this one morning on a start-up out of the blue. Now I have epub files by the hundredws which come up all tiny boxes with no words. How can I fix this????

    I can't explain why it used to work and stopped, but try ...
    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • EP6 SP11: BSP opens in new browser window where it should not

    Hi all,
    I am facing a strange behaviour:
    I have 2 BSP IViews on a page. One of them contains a ticker. When navigating to that page the ticker is opened in a new browser window. Interestingly enough this behaviour is not given with all clients. In one browser the page is displayed correcty and the ticker is shown as part of the page. In another one the behaviour described above is shown.
    Has anyone faced this kind of behaviour already? If yes, how did you resolve it?
    Besides, the portal is accessed via https.
    Thank you in advance for any input!
    Best regards,
    Helga

    Hi,
    What is the link that you are trying to open.
    Please check if you have placed the protocol - like this http://www.xmy.com" format
    and used "_blank" as target in navigateToURL API.
    Warm Regards
    Deepanjan Das
    http://deepanjandas.wordpress.com/

  • Show counts where an account has a code(s) but not other code(s) on it

    Hi I'm fairly new to PowerPivot so I'm sure one of the experts has a good answer for this.
    We have customer accounts that have service codes attached to them…i.e customer 123 could have service code 1,2,3,4,5 etc..
    What I want to do is show counts where a customer has service code(s) but doesn't have other code(s).
    For example, maybe I want to show how many active customers have service code 1 but don't have service code 4 and 5.
    Is there a simple way I can do this?
    Also I want to create this to allow for the user to choose which codes to select to compare.
    I tried using slicers but that doesn’t seem like an option.
    This should be easy to figure out I would think but I’m struggling.
    Anyone have a recommendation to point me in the right direction?
    Thanks

    Apologies, I do not have a copy of 2010 on my computer, but here are all of the formulae:
    IncludeCount:=CALCULATE(
        COUNTROWS( VALUES( CustomerCodes[customer] ) )
        , USERELATIONSHIP( CustomerCodes[service code], IncludeCode[Include] )
    ExcludeCount:=CALCULATE( 
        COUNTROWS( VALUES( CustomerCodes[customer] ) )
        , USERELATIONSHIP( CustomerCodes[service code], ExcludeCode[Exclude] )
    Include1:=IF( [IncludeCount] - [ExcludeCount] > 0, 1, 0 )
    CustomerCount:=SUMX(
        VALUES( CustomerCodes[customer] )
        , [Include1]
    And here are the tables I've got:
    CustomerCodes:
    customer
    service code
    1
    1
    1
    2
    1
    3
    1
    4
    2
    1
    2
    3
    3
    4
    3
    5
    3
    6
    4
    6
    IncludeCode
    Include
    1
    2
    3
    4
    5
    6
    ExcludeCode
    Exclude
    1
    2
    3
    4
    5
    6
    Relationships
    Active
    Table
    Related Lookup Table
    No
    CustomerCodes [service code]
    IncludeCode [Include]
    No
    CustomerCodes [service code]
    ExcludeCode [Exclude]
    This should be everything you need to recreate exactly what I've done and then apply it to your model.

  • In Facebook, the picture appears below the page, not where it should. Why?

    In Facebook, when clicking on a picture that lives in an album, a new window appears with the picture in the frame below where it should be, not next to the comments. You have to scroll down an entire page to see the picture. This only happens in Firefox, not Chrome.

    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT204088 Where do rentals show up?  They are not in my purchase history.

    Where do rentals show up?  They are not in my purchase history.

    Welcome to the Apple community.
    It depends upon which device you rented them on where they will show up. If you rented them on an iPad for example they should appear in your video app, on the computer they will appear in the iTunes application.
    Rentals made recently, may not show immediately in your purchase history, sometimes they can take a few hours or even a day or two.

  • I'm trying to write a formula to return a blank cell if the condition is met, and to show the numerical difference if not.  Here is what I've written:=IF((F35-F29)=0, " ", (F35-F29)). It is returning 0.00, not a blank cell.  Where is my error?

    I'm trying to write a formula to return a blank cell if the condition is met, and to show the numerical difference if not.  Here is what I've written:=IF((F35-F29)=0, " ", (F35-F29)). When the condition is met (i.e., the difference=0) it is returning 0.00, not a blank cell.  Where is my error?

    Without knowing what is in F35 and F29, I can only guess.  Your formula matches what you said but if F35 and/or F29 are the results of formulas and are decimal numbers (not integers), it is very possible that they are not exactly the same number even though you think they should be.  IEEE Floating Point math often has very very small errors so the answer is not exactly what you would get with a pencil and paper. Try one or both of these things:
    Format the IF cell as scientific. is that 0.0 exactly zero? I suspect it will be some very tiny number.
    Type the exact same number into F35 and F29 and see if your IF formula works as you expect.
    You might need to use ROUND on F35, F29 and/or in your IF formula to get rid of the tiny math errors.
    If you search the forum for floating point math or IEEE 754 you should find more than a few posts about Numbers and floating point math. Or you can read about IEEE 754 on Wikipedia.  It trips up a lot of people.
    Here is a common example.  B2 and C2 are from the formulas shown in B1 and C1. They should both be exactly zero, if done with paper and pencil.  Neither is exactly zero (though I have them formatted with 2 decimals so they appear to be 0.00), they are different from each other, and subtracting one from the other is also not exactly zero.

  • HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

  • How should i do when my iphone show "iphone this update is not available for this apple id because it was bought by a different user or the item was refunded or cancelled"

    how should i do when my iphone show "iphone this update is not available for this apple id because it was bought by a different user or the item was refunded or cancelled"

    I came across this issue on my iPad and iPhone today. I did some research and it was suggested that you need to change your region to wherever in the world you originally purchased the app.
    This worked for me.
    I had tried signing in and out, deleting apps and resetting my devices; because I had never used any Apple ID except for my own personal one, I thought that those options would sort it. I changed my region to the uk (where the apps were purchased) and now they have updated with no other issues.
    I hope this helps

  • HT4914 I just subscribed to iTunes match but only 61 songs from my 7GB of music on my iphone showed up.  I do not want to lose any music.  What should i do?

    I just subscribed to iTunes match but only 61 songs from my 7GB of music on my iphone showed up.  I do not want to lose any music.  What should i do?  When I go to settings-music-and try to enable iTunes Match on my iPhone it says "iTunes Match will replace the music library on this device"  I don't want to do that it only has 61 of my 7GB of songs.

    did you find out the answer?  I am afraid to hit enable.

Maybe you are looking for