Af:query saved search not getting deleted.

hi,
I have a af:query component in which I am setting saveQueryMode="default".
As per the docs, setting this value to default implies: "default: all saved searches are displayed. In addition any saved search can be created but only user saved searches can be deleted/updated."
I fire a search on the query component and then save it as "mysearch".
I then try to personalize it.
However, here I don't find the Delete button enabled for it.
I want the user saved searches to be deletable.
Am I missing anything here?
Thanks.

Simo,
I guess you have to look for MDS or Meta data service. MDS stores changes to the ui like table layout and query state for each user in a central store (db or file).
To use MDS you must use ADF security as this gives MDS the user ID.
I can't search for more info right now as I'm not in front of my pc. Check the doc for MDS and you find more info.
Timo

Similar Messages

Cookies do not get deleted / re-appear within seconds if I delete them manually and yes I've checked every single support page about this and it didn't help

– I have the most recent version of Firefox.
– I have my settings in Preferences -> Privacy on "Keep third party cookies until I close Firefox".
– I've checked "Clear history when Firefox closes" and have ticked every single box under settings (except saved passwords).
– But still, Cookies do not get deleted when I close Firefox – there are hundreds of cookies every time I open it.
– If I go to Tools -> Clear recent history, choose "everything" and tick every single box, history etc. get deleted but the cookies remain.
– If I go to Preferences -> Privacy and click "Show Cookies" and then click "Remove all cookies" twice, the cookies disappear, but they're back just seconds later.
– I've even tried going to Preferences, clicking on Exceptions and manually adding some of the websites that showed up under "show cookies" and blocking them and then deleting the cookies, but still they re-appeared within seconds, and the exceptions were blank again.
– I've checked all your support pages about this topic.
– I've seen this https://support.mozilla.org/en-US/questions/740598?esab=a&as=aaq and tried it and it didn't help.
– I've seen this https://support.mozilla.org/en-US/questions/936308?esab=a&as=aaq and this https://support.mozilla.org/en-US/questions/868910?esab=a&as=aaq, and yes I do use "Do Not Track Plus" and some of the Cookies seem to be Opt-Out-Cookies but most are not.
Please help me. I used to be a big fan of Firefox but this is getting really scary.

You can't remove opt-cookies that are added by an extension unless you disable or uninstall that extension, so you can disable the do not track extension as a test to see if that allows to remove the cookies.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

Aggregation level not getting deleted.

Hi All ,
We have deleted the aggregation levels from our development system and captured them in one change request.
On transporting this request to quality (the transport is going successful) ,the objects are not getting deleted and getting displayed in transport connection and metadata repository.
Any pointers to delete directly the aggregation levels from quality and production system or to resolve this issue.
Thanks and Regards
Rashmi Nair.

Hi Rashmi,
Have you deleted all the objects using the aggregation level.
e.g query, planning function etc.
-Vikram

Temporary files are not getting deleted

Hi All,
I am using informix database and my code is reading BLOB from database and writing the image to different storage media. The program has to run for number of images. It is writing to media successfully but not exiting even after printing the last statement in program. it is generating some temporary files ifxb_* . If I use System.exit() garbage collection is not happeneing and temporary files not getting deleted.
I am storing BLOB to an InputStream. and closing all the Connections and ResultSet before exit.
Can anyone please tell why program is not exiting normally?

gtRpr wrote:
It doesn't make much sense to me to go through extra work to make code insecure, when doing things the right way is easier and more secure.@yawmark - I get it, relax.
I never used them last year because I only found out about there existance about 4 Months ago.
And guess what I have never used normal statements for something like that again.
Only time I use a normal Statement is when I run that query only once, and no the entire query is hardcoded so no need for any worries due to security.Um ... D'you post this to the wrong forum/topic?
Anyway, OP ... I don't know a thing about informix, so perhaps a trip over to IBM would help ... they have lots of information on their site. You might want to try a different forum right here at java.sun.com as well.
About those closing of Connections and Resultsets ... are they in finally clauses? They should be.
~Bill

Material with flag for deletion are not getting deleted

Hi All,
Classic Scenario
ERP - Materials were marked for deletion on the client level
SRM - COMMPR01 - Materials are marked for deletion
Question - When we ran BBP_CCM_Transfer_Catalog and Publish the Master Catalog the materials are not getting deleted in TREX.
Please advice.
Thank you very much,
Carpenter

I have to delete the Product in SRM and this will delete the Index in TREX Search.
Thanks

Changes in properties in query definition is not getting transfered to WB

Hi,
I am using the analysis grid(design mode) to create different views of 2 queries. My workbook has near about 20 different worksheets based on these 2 queries.
I am facing a wierd issue. Once this work is completed now if I make any changes to query properties its not getting reflected to workbook. One of the example is by default hierarchy has lowest node at bottom. I want to have it at top. I have made changes in the charcteristic properties but now its not getting replicate to query.
Please help.
Regards,
Divya Prakash Srivastava

Hi,
Please check in workbook settings.When Reference View is checked, the output is the current query view.If changes are made after that in the workbook and workbook saved and
reopened, it retains the current state of the workbook as long as Refresh Workbook on Open is not checked. Refresh workbook on Open would get the current state of query as output.
If I understand your issue correctly, please check 'Refresh Wokbook on Open' in workbook settings, to display the current navigational state saved in the workbook as well as the changes made in the query.Please note that the 'Reference View' should be unchecked.However, if 'Reference View' is checked, the current query changes rather than the navigational changes stored in the workbook.
Rgds
Manoj Kumar

Order category BF not getting deleted in APO

Hi Experts,
I have a situation where the material is already deleted in ECC (hence no longer existing), but the product is existing in APO and we need to delete this in APO. To do this, we need to delete the dependent orders for that product/location first and then other dependencies.
There are few orders for the prod/loc as confirmed purchase orders (ord cat BF). These orders are now PP/DS orders with status as PP firmed, output firmed and date fixed.
I have tried the two programs- /sapapo/rlcdelete and /sapapo/delete_pp_order, but system is not picking up the orders to delete.
The system shows as message as " No deletion of converted orders in active version"
As I said earlier, the product is no longer existing in ECC, hence I can not delete the orders from there.
Is there any other way to achieve this? Is there any BADI to do this in APO?
Regards
Manotosh

Hi
You can use /SAPAPO/DELETE_PP_ORDER report for deleting these orders.
Execute the this report, mention all the products for which you want to delete the order and execute it. It might give the message as orders will not get deleted as inactive in APO.
Go back please enter as DEL_EXECU, in the place where we use to enter the T-codes and enter and than again execute the report. It will delete the orders.
You can also try /SAPAPO/SDORDER_DEL report.
Thanks
Amol

Message log is not getting deleted in WEBUI (BADI ORDER_SAVE)

Hi,
I am displaying an error message based on certain conditions in BADI: ORDER_SAVE (CHECK_BEFORE_SAVE). On getting error, I am correcting that error.
Using CRM_MESSAGE_DELETE, I am deleting error message before displaying new error message. However, my error log is not going away. It is still displaying in the log in WEBUI.
Could you please help me out, how can I delete error message, and error log from WEBUI.
Thanks,
Sandeep

I have the same question as you .
   I have use folleing code to display message in web ui:
      if (conditions).
      CV_OWN_MESSAGE = 'X'.
      MESSAGE '商机描述已经存在，请修改后再保存！' type 'E' RAISING DO_NOT_SAVE .
    endif.
but when i have edit the description , the Message log is not getting deleted in WEBUI .
who can tell me , thanks for all your help !

Open TRs not getting deleted after TECO production order

Hi,
We're having an issue. We're using WMPP interface to supply the production line for the production orders. The auto TRs are generated when the production orders are released.
After TECO the production orders, the open TRs are not getting deleted automatically.
Could anyone know if these TRs get deleted automatically when we do the TECO production order?
If yes, do we have any restriction or condition based on this, the TRs get deleted?
Please explain.
Thank you.
with regards,
Muthu.

Hi Abhijit,
Thank you for your reply. It does not help me.
The auto TR creation is happening now as required. No issue on this.
When you do the TECO, it also cancels the TRs. I tested this also.
There're some scenario this open TRs cancellation is not happening. I do not know when these open TRs are not cancelled. If you know answer for this, please let me know.
Thank you for your help and time.
with regards,
Muthu.

Production Reporting out put not getting deleted after 30mins what we set.

Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
Venkat

Hi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek

File not getting deleted using File.delete()

Hi guys,
I have a code like this:
File tempdir = new File("tempdir");
tempdir.mkdir();
File temporaryFile = new File("tempdir\tempfile.txt");
FileWriter writer = new FileWriter(temporaryFile);
// write data into file
writer.flush();
writer.close();
try {
// Do something
catch (Exception e) {
// Do something
temporaryFile.delete();
tempdir.delete();The program runs successfully. The directory and the file is created and data is written successfully into it. However, the file as well as directory is not getting deleted at the end of the program. I tried temporaryFile.deleteOnExit(), but this also didn't help.
Can anyone provide some input as to what can be the possible reasons for the file not getting deleted?
Thanks..

I want the file to be created inside the directory I specified. Hence, I put the "\". Please let me know if there is some other way to achieve this. This way I am getting the file created at the location I want.
One more interesting thing which I noticed. Actually this code is part of a JUnit test. In the same JUnit, I am creating new files in atleast 2-3 test methods. But the deletion of files is really random. Sometimes, 2 out of 3 get deleted, sometimes only 1 gets deleted. However, I didn't come through a single instance wherein all the 3 files got deleted. :-(
Also, the directory is never deleted. However, I got the reason behind this. As per the File API, the directory will not be deleted if it is not empty.

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Data in BBP_DOCUMENT_TAB are not getting deleted

Hi All,
We are in SRM 4.0.
Since today morning whenever a user trying to create / change shopping cart, PO, GR it got updated in the BBP_DOCUMENT_TAB. But it is not getting deleted automatically. Earlier it used to get deleted automatically once the documents have been ordered.
But I could see the POs and GRs have been transfered to the back end system.
Job CLEAN_REQREQ_UP is running every 2 mts.
Please advise.

Hi Arun,
note 338985 describes in detail how the the status of the document(s), CLEAN_REQREQ_UP and the IDOCs interact.
If the documents are posted without any error i.e. there´s everything perfect but the 'obsolete' entries in BBP_DOCUMENT_TAB, then this sounds like a malfunction.
Maybe you should debug the the cleaner with one document and see whats happening starting at the following spot:
CLEAN_REQREQ_UP
process selected entries: check existence of follow on documents,
update if necessary local documents etc. (depends on entry type)
        LOOP AT selarea.
          IF still_to_proc = c_proc_block_size.
            SET UPDATE TASK LOCAL.
          ENDIF.
lateron the entries are deleted in function module BBP_DELETE_FROM_DOCUMENT_TAB
Note 535765 describes how to delete entries via a Z* report but I would NOT RECOMMEND to do that without having checked the situation by SAP before.
see note 535765:
Please note!:
Deleting relevant entries from the BBP_DOCUMENT_TAB may cause severe
problems, as the system needs the entries to set the right status to
shopping carts, invoices and confirmations. So please be careful with
the deletion of entries.
Kind Regards
Michael

Release PR Should not get deleted in md51,planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar
Edited by: skumar kalame on Nov 10, 2008 1:59 PM

Hi,
The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
The SAP help for firming type reads as below:
firming type 0
The system does not firm procurement proposals automatically.
firming type 1
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
firming type 2
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
firming type 3
Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
firming type 4
Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
If helpful award points
Regards,
Vivek

How do I save photos that have been synced to my Ipad2, so that they do not get deleted when I sync with a different photo file on my computer.

How do I save photos that have been synced to my Ipad2, so that they do not get deleted when I sync with a different photo foder on my computer (Pc win7).

Place that first folder of photos that you synced to the iPad within the main folder of photos that you sync from and select them to sync again. You can place any number of subfolders within the main folder that you sync from and select those folders to sync. Just "tick"(select) the folders in the photos tab in iTunes.
iOS and iPod: Syncing photos using iTunes

Af:query saved search not getting deleted.

Similar Messages

Maybe you are looking for