Af:richtextEditor font-family- adding new font
I am using af:richTextEditor in a web page. The font-family drop down inside af:richTextEditor components contains some font.
I want to add some more font (e.g verdana,century etc) in that font-family drop down.
Is it possible to add some extra fonts in the richTextEditor font family.
hi,
In STYLES u have this ARIAL format available in both paragraph format and character format.
so no need to add again.
Similar Messages
-
Adding new fonts to Symbian Anna on E6
I wonder to know how to adding new fonts to Symbian Anna on my E6. Most of my Word and PowerPoint documents require some special fonts, such as Courier News, in order to display correctly.
Does anyone know the solution?@truong_nt
There is solution demonstrated for E7, N8, C7 & C6-01 but not yet seen E6 mentioned in this respect.
Happy to have helped forum with a Support Ratio = 42.5 -
Imac Snow Leopard .....While adding new fonts, somehow dumped necessary fonts from OS 10.6 library. now have only blank menus, dialog boxes, even apple support site. How to fix?
Thanks again baltwo,
Thank you all very much,
Strangely enough even though I had gotten the " Install failed....Mac OS X could not be installed on your computer....The install could not copy the necessary support files" I had left it on the screen and left the room for awhile. I walked back into my computer room a few minutes ago and the window on the screen stated that the SL OS 10.6.4 had successfully installed. I am now very carefully checking things out to make sure the fonts are where they should be. With the exception of some updating it appears all may be well.
PS. Below is a note I was writing to Kurt (also assisting me) to try and detail what had happened. Added it in case it could be of any value to you
Kurt,
Thank you for response. following is series of events to my best recollection.
I would typically not have been this stupid/ignorant but was doing this in a hurry with someone asking me questions...wasn't paying attn. to what I was doing
• downloaded new fonts
• opened downloaded fonts, clicked font icons to open and install them.
• typed "fonts" in spotlight (with the intention of moving new fonts into font folder)The Spotlight results window revealed 5 or 6 font folders. I ignorantly started to try a clean up by installing all fonts into a single folder (not thinking about system fonts)
Sometimes when you are moving a folder the window you moved it from will jump around..well this occurred and I mistakenly released the folder on the desk top. This caused a copy to be made. After some investigation I realized it was a copy of the required system fonts that were still located in the original "spotlight results" window.
• I attempted to delete the copy..when I did an administrator password box appeared I entered the password and the result was both system font folders were deleted (the original & the desk top copy I erroneously made)
• Now windows open but are blank with sometimes faded mini sized icons. If I click one of the mini icons i get a new blank window. I am unable to give any instruction, have total blank menus, dialog boxes, etc.
I can open the some of the items that have icons in the apple dock at bottom of page in the -
Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?
I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike -
Issue with adding new fonts in Lion
I'm trying install two new fonts on my Mac Book Air and cannot get it to allow me to add them to the Font Book. (I've just successfully added the same fonts on to my Mac Book Pro which runs Snow Leopard, so this is definitely a Lion issue.)
I've created a new font library and then tried adding the fonts to it but it refuses to validate the font saying that '1 serious error was found. Do not use.' Any ideas of how to remedy this as I urgently need to use the font?
Many thanks.Derp Derp Derp?? TestDerp Then Derpy Derp Derp
-
Changing Fonts to a new font not defined in OBIEE
We are doing a rebranding of our company and we would like to use a new font for all of our reporting. This font is not one that is currently listed in OBIEE. I have the .otf files, I am hoping these read the same as .ttf files, but I don't know where to place them nor can I find where to define them so the Dashboard, Answers and the pdf write picks them up.
Thats for any help,
JayHi,
I'm afraid this will be very hard to implement. In fact, it hasn't much to do with OBIEE, but with your browser. The problem is that GillSans is not a standard font in a browser. So even when you edit all your css files and set GillSans as the default font, it won't be used because GillSans isn't implemented as a font in your browser.
Read here more information about "browser-safe fonts":
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Regards,
Stijn -
Firefox installed in Archlinux can display fonts after a new fonts installed
Hi! I'm a Linux user. Recently I migrate to Archlinux. At first time I used Firefox without issues. Then in the process the install and config software and the distro I installed new fonts. That fonts I used in IBM Linux distro, OpenClient based on RHEL 6.5. Thats fonts are a backup of that machine. The set of fonts include around of 4000 fonts: Windows 7 Fonts, Google Fonts, Droid and others. In RHEL I have not issues with this fonts. The fonts groups are:
<pre><nowiki>[elrengo@xpsl421x .fonts]$ ls -l
total 272
drwx------ 1 elrengo users 4096 Sep 8 2010 AnonymousPro-1.002.001
drwx------ 1 elrengo users 4096 Sep 8 2010 AnonymousProMinus-1.002.001
drwx------ 1 elrengo users 4096 Feb 27 2011 dejavu-fonts-ttf-2.33
drwx------ 1 elrengo users 4096 Jun 10 2013 DroidFamily
drwx------ 1 elrengo users 135168 Jun 4 2012 googlefontdirectory
-rw------- 1 elrengo users 58464 Jun 10 2013 Inconsolata.otf
drwx------ 1 elrengo users 65536 Oct 3 2013 Windows7Fonts
[elrengo@xpsl421x .fonts]$ </nowiki></pre>
But in Archlinux after fonts installation Firefox can not show fonts, and I can not write in textbox. I do:
* Reset Firefox to defaults --> Do not works.
* Uninstall Firefox / Re install Firefox --> Do not works.
* Reinstall fontconfig package in Archlinux. --> Do not works.
* Update font cache --> Do not works.
The screenshot --> http://i.imgur.com/aIZvv6n.png
If need it something more please let me know
Thanks in advance!
Kind regardsIf [https://wiki.archlinux.org/index.php/firefox#Firefox_variants Firefox ]does not anti-alias and/or hint your fonts, try to install [https://aur.archlinux.org/packages/ttf-win7-fonts/ ttf-win7-fonts] (preferred) or [https://aur.archlinux.org/packages/ttf-ms-fonts/ ttf-ms-fonts] and take a look at [https://wiki.archlinux.org/index.php/Font_configuration Font configuration].
-
Keynote 2 and adding new fonts?
I have suddenly been designated slide producer in a Mac
world. I am a computer illiterate. A coworker sent a
series of slides to put into a program. When I opened his
slides I received message of "Missing Fonts" Amienee and Arnprior.
The Keynote flag that appeared said to include missing fonts, add them to your Fonts folder, then quit and reopen Keynote. I can't seem to drag, drop, or other wise move these fonts, nor do I know how to find them....are they Microsoft things; I don't have any Microsoft on my machine.
Can anyone help me solve this puzzle?You could try a google search.
Arnprior is by Larabie, for instance...
Not sure about Aminee, though. You should contact the person who sent you the file to find out what fonts were used.
With a presentation in Keynote, however, it is best to either use the fonts included in MacOSX and Keynote for consistency. If you are sharing files which have fonts that are specific and not included in the system or program, make sure they are included whenever you transfer the presentation to another computer, to prevent this kind of situation from happening.
When you have the font, doubleclicking on it should open fontbook, and it will prompt you to install it. -
can i have bengali font and language in my nokia 701. Please suggest me....
You need to contact your local Nokia Care and ask them whether they have the language pack for your device. It can't be done by the User ...
-
HI,
We are using OBIEE 10, on Linux platform. We have an urgent requirement to utilise a new Font in the OBIEE portal. In particular, when we select a column in the Answers, we should be able to get this font in the Column Properties->Style -> Font ->Family.
Also this should be set as the default font in the dashboard. Currently the OBIEE restricts the Font selections to default 10. I need to either add a new one , or replace existing one. Can someone suggest the files to be modified?
Regards
JayCheck this URL,
Re: Changing Fonts to a new font not defined in OBIEE
Also, by editing commonuitemplates.xml and new font can be added in <option>......</option> tag in some kuifont templates tag in it.
source: how to introduce new font in to OBIEE_11g -
New Font wont show in Adobe reader.
My company is re-branding itself and part of that re-branding is having the new name in a new custom Font. But when we print our external reports to send to customers the new Font does not show. I tried adding the Font to the adobe reader Font folder but still nothing? I wish Adobe Reader would just get it's Fonts from C:Windows\Fonts\. What do I need to do?
Donnelly JamesSounds like you need to talk to the folks that build the application that you use to create the PDF's.
No one here will be able to tell you how to embed fonts in that application unless you get lucky and run in to someone else that uses it. Their support would be your best bet.
Razgreeez wrote:
The reports are being built in program called Digital Metaphors Report Builder. We can print to a printer, text file, PDF etc. When I preview the report and print it out at a printer the font is there but not in PDF. I don't have Adobe Acrobat installed.
I looked in the File/Properties/Font and the new Font isn't listed. Arial, Tahoma and Times New Roman.
How do I embed the Fonts? -
How do i add new font to sap(smartform)
hi, all!
now, i have one thing to be solved!
i'm using smartforms for developing form program.
i can't find what i want to use new font in sap.
so i added new font to sap using se73 t-code. but some are missing, for example i can't use bold...
so, if anybody have these experience... tell me how to...
best regards,
gy cho.hi,
For SE73, on screen
There is a button 'True Type-Font Importian'.
On pressing this button you will go to next screen.
Give unique name of font and .ttf file of your computer.
If you select Bold or Italic, select different font file respectivly.
and Execute.
Fonts are centralized for SAP.
if you are not authorized to do cross-client activity, it will not allow you.
Usually Basis Team does this for developers. -
Hello all,
Not sure if this is the right place to post this but here goes. I have a program that needs to change the font of at least 250,000 letters, however after doing this the program runs slow and laggy as if changing the fonts of each letter took up memory and never released it? Here is a compilable example, Click the button at the bottom of the window and watch the letter it is currently working on. You will notice that around 200,000 it will begin to not smoothly count up anymore but count in kind of a skipping pattern. This seems to get worse the more you do it and seems to indicate to me that something is using memory and not releasing it. I'm not sure why replacing a letter's font with a new font would cause more memory to be taken up I would think if I was doing it properly it would simply replace the old font with the new one not taking anymore memory then it did before. Here is the example: This program sometimes locks up so be prepared. If someone could maybe point out what is causing this to take up more memory after changing the fonts that would be great and hopefully find a solution :) Thanks in advance.
-neptune692
* To change this template, choose Tools | Templates
* and open the template in the editor.
package paintsurface;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.util.List;
public class PaintSurface implements Runnable, ActionListener {
public static void main(String[] args) {
SwingUtilities.invokeLater(new PaintSurface());
List<StringState> states = new ArrayList<StringState>();
Tableaux tableaux;
Random random = new Random();
Font font = new Font("Arial",Font.PLAIN,15);
// Point mouselocation = new Point(0,0);
static final int WIDTH = 1000;
static final int HEIGHT = 1000;
JFrame frame = new JFrame();
JButton add;
public void run() {
tableaux = new Tableaux();
for (int i=250000; --i>=0;)
addRandom();
frame.add(tableaux, BorderLayout.CENTER);
add = new JButton("Change Font of letters - memory leak?");
add.addActionListener(this);
frame.add(add, BorderLayout.SOUTH);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(WIDTH, HEIGHT);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
public void actionPerformed(ActionEvent e) {
new Thread(new ChangeFonts()).start();
void addRandom() {
tableaux.add(
Character.toString((char)('a'+random.nextInt(26))),
UIManager.getFont("Button.font"),
random.nextInt(WIDTH), random.nextInt(HEIGHT));
//THIS CLASS SEEMS TO HAVE SOME KIND OF MEMORY LEAK I'M NOT SURE?
class ChangeFonts implements Runnable {
public void run() {
Random rand = new Random();
for(int i = 0; i<states.size(); i++) {
font = new Font("Arial",Font.PLAIN,rand.nextInt(50));
states.get(i).font = font;
add.setText("Working on letter - "+i);
class StringState extends Rectangle {
StringState(String str, Font font, int x, int y, int w, int h) {
super(x, y, w, h);
string = str;
this.font = font;
String string;
Font font;
class Tableaux extends JComponent {
Tableaux() {
this.enableEvents(MouseEvent.MOUSE_MOTION_EVENT_MASK);
lagState = createState("Lag", new Font("Arial",Font.BOLD,20), 0, 0);
protected void processMouseMotionEvent(MouseEvent e) {
repaint(lagState);
lagState.setLocation(e.getX(), e.getY());
repaint(lagState);
super.processMouseMotionEvent(e);
StringState lagState;
StringState createState(String str, Font font, int x, int y) {
FontMetrics metrics = getFontMetrics(font);
int w = metrics.stringWidth(str);
int h = metrics.getHeight();
return new StringState(str, font, x, y-metrics.getAscent(), w, h);
public void add(String str, Font font, int x, int y) {
StringState state = createState(str, font, x, y);
states.add(state);
repaint(state);
protected void paintComponent(Graphics g) {
Rectangle clip = g.getClipBounds();
FontMetrics metrics = g.getFontMetrics();
for (StringState state : states) {
if (state.intersects(clip)) {
if (!state.font.equals(g.getFont())) {
g.setFont(state.font);
metrics = g.getFontMetrics();
g.drawString(state.string, state.x, state.y+metrics.getAscent());
if (lagState.intersects(clip)) {
g.setColor(Color.red);
if (!lagState.font.equals(g.getFont())) {
g.setFont(lagState.font);
metrics = g.getFontMetrics();
g.drawString("Lag", lagState.x, lagState.y+metrics.getAscent());
}Here is the block of code that I think is causing the problem:
//THIS CLASS SEEMS TO HAVE SOME KIND OF MEMORY LEAK I'M NOT SURE?
class ChangeFonts implements Runnable {
public void run() {
Random rand = new Random();
for(int i = 0; i<states.size(); i++) {
font = new Font("Arial",Font.PLAIN,rand.nextInt(50));
states.get(i).font = font; // this line seems to cause the problem?
add.setText("Working on letter - "+i);
}neptune692 wrote:
jverd wrote:
You're creating a quarter million distinct Font objects, and obviously you must be hanging on to all of them because each character is having its font set to the newly created object. So if you have 250k chars, you're forcing it to have 250k Font objects.
Since the only difference is that rand.nextInt(50) parameter, just pre-create 50 Font objects with 0..49, stick 'em in the corresponding elements in an array, and use rand.nextInt to select the Font object to use.That does make sense but it does that when the the program is first launched and doesn't lag. But the second and third time you change the letters font it seems to lag so if it wasn't taking up more memory the second time it should perform like it did when it first launched. I don't care to investigate any further. The real problem is almost certainly the quarter million Font objects. It could be that 250k is fine, but by the time you get to 500k, it has to do a lot of GC, and that's where the slow down is coming. You might even be able to make it work better with the code you have just by tweaking the GC parameters at startup, but I wouldn't bother. Fix the code first, and then see if you have issues.
Does creating a new font for each of those letters not replace the old font object? If it didn't use more memory the second and third time I don't think you would see the skipping in the counter and the slowing down of the iterations. So it must be remembering some of the old font objects or am I wrong?Using new always creates a new object. When you do it the second time around, and call letter.setFont(newFont), the old Font object is eligible for GC. That doesn't mean it will be GCed right away though. The JVM can leave them all laying around until it runs out of memory, and then GC some or all of them. -
<pre><nowiki><?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<link rel="stylesheet" type="text/css" href="index/fonts/fonts.css"/>
</head>
<body>
<h1>Heading2</h1>
<p> Testing </p>
</body>
</html>
*/CSS/*
*/Fontface rule/*
@font-face {font-family: 'Gibson-Bold';src: url('159693_2.eot');src: url('159693_2.eot?#iefix') format('embedded-opentype'),url('159693_2.woff') format('woff'),url('159693_2.ttf') format('truetype'),url('159693_2.svg#wf') format('svg');
*/Testing use of Fontface/*
h1, h2, h3, h4, h5, h6 {
font-family: Gibson-Bold;
font-style: normal;
font-size: 10pt;</nowiki></pre>You're welcome.
It is always a good idea to reload and bypass the cache after you have made changes and uploaded new files.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC) -
Just purchased a font from Adobe, the font shows in every program except Photoshop CS4
I just purchased the Frutiger family of fonts from Adobe, and installed them via the Control Panel>Fonts>Install New Font. This new font family shows up in every Windows program including Outlook and all the Office programs. However, it doesn't shop up in Photoshop CS4 which is where I need it. I saw similar questions with solutions that worked such as: Copy the fonts from Windows>Fonts to the Adobe>Fonts. However, I don't have a Fonts folder under my Adobe folder.
Very frustrating since I purchased this font package from Adobe.
Any help would be appreciated.OpenType versions or the old Type 1 format?
Also, you will never access any new fonts unless you exit all the Adobe applications first.
Also, you may need to clean up one or more of the Adobe font cache files. With all Adobe applications exited, delete all files of form AdobeFnt##.lst where ## is a two digit number. Those files will be regenerated when you run the Adobe applications. All fonts should be found during such a "rebuild."
Another thing to look for is whether for some reason or another, the fonts are placed outside of normal alphabetic order in the Adobe applications. This sometimes happens if the font has a non-standard character set or name.
- Dov
Maybe you are looking for
-
My ipod Touch 2nd Gen 8GB is stuck in recovery mode I tried RecBoot and when that couldn't do it I tried reiBoot both failed to fix my problem what do you suggest?
-
It won't switch on unless you plug it into a computer but when you do it flicks between 3 screens before turning itself off. Its brings the apple screen for 1 second, the do not disconnect for 1 second and then then folder and exclamation screen for
-
Urgent: Is it possible to deploy a web service EAR/JAR to a container other than WebLogic?
Hi, Is it possible to deploy an EAR/JAR created using JwsCompile to any J2EE container? Ideally, I would like to make use of the features that are only provided by WebLogic Workshop, like State Management, Callbacks too. If possible, what are the ste
-
Credit block should not require for Credit card paid sales order
Dear friends, my client want that sales oder with credit card payment should not block sales order for credit management reasons. Hoe can it be configured. Regards rdc
-
Ok, I just purchased iTunes HD movie: Quantum of Solace just to see how it looks. Once I started to download the file, it downloaded both HD and the standard movie. Does it do this for all of the HD films? I am using a laptop and don't have 5GB of ha