AFAB-Depreciation not posted completely - URGENT

Hi All,
I tried to execute AFAB and i got an error for 69 assets saying that "depreciation not posted completely". So i tried to repeat run the depreciation and only out of 69 only one asset is only coming into the screen while doing test run. Can any one tell me how to overcome this issue.
I am getting an error - the message is 'Last posting run terminated (Restart in period 2008 012)'
Thanks in advance
Sri

Hii
U getting this message means when u run depreciation run due to some reason it was terminated and the run was not carried out completely... so due to this basic reason it showing this ,,,,,
for this u need not to do repeat run instead u need to do restart. the option below the repeat run..
Repeat run is used when some additions or adjusments are there after the depreciation run is completed sucessfully...
but in your case i think it was terminated before it was completed sucess fully
so go to AFABN and run restart
i think this will solve ur problem
thanks
sejal

Similar Messages

Asset Fiscal Year End Closing - Depreciation not posted completely in 2010

Hi Experts,
I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year.
This happened because of the following situation:
Vendor Incoice was posted in 30.12.2010, with a document date 31.03.2010 (meaning that for this asset the depreciation calculation start date was 01.03.2010). Then, in 30.03.2011 someone post the reversal document, with posting date 31.12.2010.
So for this asset I donu2019t have any depreciation posted in 2011 and no values in depreciation book, for the asset, meaning that even if I change the depreciation calculation start date for 01.01.2011, it will still be necessary to run depreciation in Dec.2010.
However I cannot run depreciation for this asset for 2010 because it will have impact in 2010 balance sheet, which cannot happen.
Do you have any ideas to solve this problem?
Thanks!
Best regards,
Andreia Nascimento

Hi,
As i have already suggested you for the [SIMILAR THREAD|Re: Asset Fiscal Year Closing not possible], which you have only posted in FI forum, there is no other alternative than running the repeat dep run for FY 2010 for period 12.
Please do not cross post your questions.
REgards,
Srinu

Error message when posting revaluation "deprecation not posted completely"

Hi Gurus
When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
I have run AFAB for period 01/2010 and the entry in TABA is correct.
Can any one help me solve this?
Thanks
Gil

Hi
I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
I have ran AFAR, and it didn't have any effect

Depreciation not post in GL

Hi!
While I run Test Run of depreciation, it shows no error. and also check the account document there, it is shows correct. like Depreciation A/c Dr. to Acc. Depreciation A/c Cr.
But while i do the job in background and execute, system is not giving me any error and its finished status in SM3. When I am going to check the depreciation and acc.depreciation a/c in FBL3N its shows me :
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1.) No corresponding items have been posted.
2.) You are not authorized to display this data.
3.) The items have already been archived.
But in the same time while i Check Costing document through KSB1 its shows me the value of depreciation with cost element No.
Can you please tell me what will be the problem in my IMG Setting.
Appropriate points will be allotted.
Rakesh

Rakesh,
Go to AW01N and check for asset whether the depreciation for the current period has been marked as posted or not.
If yes then please try for the Depr acct only (not Accu depr) in FBL3N. Or go to FS10N and check it out. Is this the first such thing happening?
Or else try these depr reports
S_ALR_87012026 - Depreciation Current Year
S_P99_41000192 - Posted depreciation by asset and posting period
S_ALR_87010175 - Posted depreciation, related to cost centers

Depreciation-To posting Period

Hi,
In production server depreciation start date in the depreciation area is given as 31.03.2007 instead of 26.09.2006.
Now in the asset explorer the depreciation posted is showing for period 13.In the very next row it is showing period 16 and planned depreciation value is showing straight way.Whenever we run depreciation (Test Run)for period 14,15 it is showing already posted.And if we run for period 16 it is showing on repeat run.Pls help
Due to this the year can not be closed for this particular asset.The error message "Depreciation not posted completely"-Against a partcilular asset".It is happening only for one asset.
The depreciation start date in the asset master also can not be changed due to close of year.
Now how will we rectify the depreciation start date in the asset master and correct the depreciation to post and close the year 2006 -2007.we can not close the period 2006-2007 for asset accounting.

Hi,
if you see a planned value in the asset explorer in a special period, then it means that you posted alreaddy in special periods, but due to asset changes there is still depreciation to be posted. From your description you surely posted periods 13, 14, 15 and 16 in this company code. If so, you can only post a REPEAT run in period 16.
Regards,
Markus

Depreciation run not posted for 2006/2007 and 2008.

Hi,
I have a situation where depreciation has not been posted for 2006,2007 and 2008.
Now since there are 2 fiscal years already open the system does not allow to post to the 2008. since only 2 fiscal years can be open at a time.
Old periods cannot be opened to post depreciation.
I feel the only way out is to assign a new depreciation area?
Is it possible to change the Chart of Depreciation or active (posted to) depreciation area?
Any suggestions.
Thanks,
Daksha

Hi
If your 2007 is open then post the depreciation thru AFAB with unplanned posting run, after completing it you can close the periods & open 2008
Hope this solves your issue
Regards
Veena

Depreciation Document Not Posted

Hi,
While running the Depreciation Through T-Code AFAB in the Test run Mode Message is given that Test Run Completed but No Document Posted.Where I set The document Type for Depreciation and the Document Range also.Pls Help

Even in the simulation it create document to dispay (not posted)
I have the message 3 documents were created.
Have you other errors?
Have you set up in config?:
Financial Accounting / Asset Accounting / Integration with the General Ledger/Additional Account Assignment Objects
- Activate Account Assignment Objects
- Specify Account Assignment Types for Account Assignment Objects

Unplanned depreciation in FI Fixed Assets does not post to FI-GL

We used transaction ABAA (unplanned depreciation) movement typ 640 to post a depreciation amount - The document has been posted in the AA module ( it is now showing against the Asset in the transaction Asset Explorer transactions AW01N and AB03) however we do not manage to get it posted to FI and consequently have a reconciliation difference between the value in the AA module and the FI-GL.
Can anybody please give advise how we can correct this?
We tried following so far:
(1) post the unplanned depreciation document using transaction AFAB - depreciation posting run.
No documents created.
The message log displays "You want to run the next planned run of the depreciation posting run in period 014. However, the last planned posting run was already performed for period 014."
Than tried to execute the transaction with selection 'repeat' , 'restart', 'unplanned depreciation run': no documents posted either ......
(2) reverse the unplanned depreciation document using transaction AB08
This failed; the system reports following
"No FI document was generated for the asset transaction" and subsequently after clicking the 'post'button' an error"No unique header information transferred into Accounting
Message no. RW001
Diagnosis: The interface into Accounting requires:
Header data
Item data
Currency data
The header data is missing, or several items were transferred.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up
So..............No idea how to get rid of this document.
Can anybody help?
Kind Regards,
Arjan

Hi Suresh,
Thanks for you feedback.
I had already tried your suggestion; it was the actions which I mentioned under the point (1) in my message.
The system did not generate any FI document, this is exactly the unexpected problem that I am trying to solve.
Any further suggestions?
Kind Regards,
Arjan

Accumulated depreciation is not posted at the time of sale of asset with r

hi
all
i have created a asset with acquisition date 1.4.2011. i have posted the acquisition value as 20000 inr.
i have executed the depreciation run in AFAB t.code for april2011, may 2011,.. the depreciation is posted. in august i am retiring the asset with revenue in f-92. at this time the accumulated depreciation is not debited . the system is taking the difference between the acquisition value and sale proceeds to loss on sale of asset directly.
pls suggest me what is to be done
thanx in advance

yes, i have assigned the GL account for the accumulated depreciation on the asset in AO90. when i execute the depreciation run the system is posting the entry
depreciation a/c dr
to accumulated depreciation on asset a/c
but at the time of retiring the asset it is not debiting the accumulated depreciation on asset a/c.
any how thanx for Ur reply

Depreciation planned but not posted.

Hi all,
There is the following case.
In asset explorer there is planned depreciation which is not posted for prior year. I want to erase this planned depreciation (is incorrect) in prior year without affecting G/L. Could you please advise?
If this is to be made with ABSO and specific transaction type, could you please tell me setup of the transaction type?
Best Regards,
Kyriakos

Dear Kyriakos,
is this prior year closed in FI-AA already? If so, how were you able to close this fiscal year? This should be found as error by the fiscal year close report.
If the prior fiscal year is not closed, then you can either change the depreciation key to a non-calculating one (e.g. 0000) or set a shutdown indicator for the complete fiscal year. This should reduce the planned depreciation to zero. No posting or G/L entry is necessary therefor.
If the prior fiscal year should be already closed in FI-AA (still I would be wondering how you did that), you could use the solution provided in [SAP Note 29694|https://service.sap.com/sap/support/notes/29694].
Hope this helps,
Markus

Can not post real depreciation into FI

Dear all
I executed depreciation run in test mode, there is no problem. After that I executed it in normal mode, it job was finished but there was no data in the pool list, there wasn't any depreciation document posting into FI Module and its net book value is stable. How can I solve this problem?
Best regards,
ChinhVH

Hi,
Period interval: 001 mean as following:
Key to the entries when using a fiscal year version with 12 normal posting periods:
1 = monthly posting
3 = quarterly posting
6 = semi-annual posting
12 = annual posting
Normally, we select Monthly posting as defult.
Please try to recheck again:
1. Check the account determination for GL accounts for the asset class via AO90
2. Check if there is postings which was not completed for the previous month.
Hope this help.
Regards.
Message was edited by:
Bird

ABAW not posted into GL after AFAB

Dear Experts,
I am exploring the asset revaluation function (ABAW). Have configured the integration point between AA-GL(AO90). After posting revaluation via ABAW, I have executed AFAB but the values from the revaluation is not posted/generated from the depreciation run, hence my GL is not updated accordingly.
Hope to hear from you soon...
Regards,
MC

dear
This revaluation amount will not be posted automatically. Once depreciation run takes place then only the amount gets posted to the GL account. Hence it is advisable to run at the year end.
Also the depreciation run has to be for the first time in order to get the revalued amount to be posted. Otherwise, the amount will not be posted in the GL account.
Run the Depreciation for a period in AFAB. If you do a test run you would be able to see the revaluation amount that has to be posted and the same would be reflected in the planned values in asset explorer (AW01N).
regards
rohit

Depreciation is not posting in ECC6 upgrade

Hi
I am on tech upgrade 4.5b to Ecc6. Depreciation is not posting by AFAB first error was doc number range is defined external and this should be internal.
I have changed this AF doc type number range 03 as internal number range but still depreciation is not posting.
regards
imdad

Hi,
Please share the error message you are getting at the time of Depreciation run.
Thanks and Regards
Binoj M D

Fixed asset Write up Error. ABZU(Parallel depreciation area 32 is not poste

Hi Sap Gurus,
      I am running into an error when trying to post a write up via "ABZU". Here is the error message "Parallel depreciation area 32 is not posted". Message no. AA565.
Diagnosis
The asset to be posted does not manage parallel depreciation area 32, or transaction type that you are using is limited to certain depreciation areas, and does not contain depreciation area 32. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I tried "Limit Transaction Types to Depreciation Areas" in t-code:OAXE for derpeciation area 01 and 32 but still i am getting the same error. I am using ttype:700. When i look into derpeciation tab in asset master record i have depreciation area 32 is there. Is there any configuration piece i am missing. We are using area 32 as IFRS in group which is copy of 01.
Any help will be appreciate.
Thanks and Regards,
Babu

Hi,
There are the following reasons:
1) The wrong transaction type is being used. Please verify that you are using transaction type in the 700 series for your write-up.
2) The transaction type is restricted to certain depreciation areas.   In transaction OAXE the transaction type can be restricted to post only to certain areas. If the asset manages a parallel area you have to extend the posting to include the parallel area.
3) The asset was created before you introduced parallel currencies and does not manage the parallel area. In this case, the parallel area must be created on the asset or the values need to be transferred to a new asset that manages the parallel area.
4) Transacion types 600 and 601 can only be used for assets that have a calculation key in their depreciation area that allows no automatic calculation (for example depr key MANU). The unplanned transaction types however can be used with assets that allow automatic calculation.
You also need to verify that there are entries in Table ANLB for the asset in question for the depreciation area.
5) Your company code uses parallel currencies (currency types 10-co.code currency, 50-Index based currency, 30-Group currency...for example). The assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this in activating the depreciation areas with parallel currencies for all the asset classes used in this company code.
Check transaction OAYZ to make sure the areas are activated for all asset classes in the co.code. If not, you will need to       activate these areas and ensure the asset has all areas assigned.
regards Bernhard

Post order processing for sales document is not yet complete

hi,
sap gurus,
i am facing the error while saving the sales order and this ticket is unique and it is saying that
"post order processing for sales document is not yet complete".
please help me in this regard.
and it is blocking the order for further processing.
regards,
balajit

I dont think this is a standard error message. Some exit is applied for sale order to meet some requirements. You need to check with your ABAPer.
In fact, you can conclude yourself based on the error message number. If it starts with Z, then the above holds good.
thanks
G. Lakshmipathi

AFAB-Depreciation not posted completely - URGENT

Similar Messages

Maybe you are looking for