AFAB - Not posting

Hi
I am facing a typical error in AFAB. While I execute in the Test mode the posting is simulated (Planned Run). If I untick test run, system says do repeat run. If I do repeat run, it goes into background process and I dont see any job created in SM37. If I doulbe click the message it says - !! This processing can only be carried out as background processing !! - Message no. AA758
Any inputs will be highly appreicated.
Thanks
Sanjay!

Dear Sanjay,
When you finished your test run and ready for actual run then just deselect the Test Run and go to menu Program>Execute in background. Now go to SM37, select all status and execute you will find your job here.
Regards,
Chintan Joshi.

Similar Messages

  • AFAB-Depreciation not posted completely - URGENT

    Hi All,
    I tried to execute AFAB and i got an error for 69 assets saying that "depreciation not posted completely". So i tried to repeat run the depreciation and only out of 69 only one asset is only coming into the screen while doing test run. Can any one tell me how to overcome this issue.
    I am getting an error  - the message is 'Last posting run terminated (Restart in period 2008 012)'
    Thanks in advance
    Sri

    Hii
    U getting this message means when u run depreciation run due to some reason it was terminated and the run was not carried out completely... so due to this basic reason it showing this ,,,,,
    for this u need not to do repeat run instead u need to do restart. the option below the repeat run..
    Repeat run is used when some additions or adjusments are there after the depreciation run is completed sucessfully...
    but in your case i think it was terminated before it was completed sucess fully
    so go to AFABN and run restart
    i think this will solve ur problem
    thanks
    sejal

  • ABAW not posted into GL after AFAB

    Dear Experts,
    I am exploring the asset revaluation function (ABAW).  Have configured the integration point between AA-GL(AO90).  After posting revaluation via ABAW, I have executed AFAB but the values from the revaluation is not posted/generated from the depreciation run, hence my GL is not updated accordingly.
    Hope to hear from you soon...
    Regards,
    MC

    dear
    This revaluation amount will not be posted automatically. Once depreciation run takes place then only the amount gets posted to the GL account. Hence it is advisable to run at the year end.
    Also the depreciation run has to be for the first time in order to get the revalued amount to be posted. Otherwise, the amount will not be posted in the GL account.
    Run the Depreciation for a period in AFAB. If you do a test run you would be able to see the revaluation amount that has to be posted and the same would be reflected in the planned values in asset explorer (AW01N).
    regards
    rohit

  • Unplanned depreciation in FI Fixed Assets does not post to FI-GL

    We used transaction ABAA (unplanned depreciation) movement typ 640 to post a depreciation amount - The document has been posted in the AA module ( it is now showing against the Asset in the transaction Asset Explorer transactions  AW01N and AB03) however we do not manage to get it posted to FI and consequently have a reconciliation difference between the value in the AA module and the FI-GL.
    Can anybody please give advise how we can correct this?
    We tried following so far:
    (1) post the unplanned depreciation document using transaction AFAB - depreciation posting run.
    No documents created.
    The message log displays "You want to run the next planned run of the depreciation posting run in period 014. However, the last planned posting run was already performed for period 014."
    Than tried to execute the transaction with selection 'repeat' , 'restart', 'unplanned depreciation run': no documents posted either ......
    (2) reverse the unplanned depreciation document using transaction AB08
    This failed; the system reports following
    "No FI document was generated for the asset transaction" and subsequently after clicking the 'post'button' an error"No unique header information transferred into Accounting
    Message no. RW001
    Diagnosis:  The interface into Accounting requires:
    Header data
    Item data
    Currency data
    The header data is missing, or several items were transferred.
    System Response
    Processing of the data in the Accounting interface is not possible.
    Procedure
    This is a system error of the application which was called up
    So..............No idea how to get rid of this document.
    Can anybody help?
    Kind Regards,
    Arjan

    Hi Suresh,
    Thanks for you feedback.
    I had already tried your suggestion; it was the actions which I mentioned under the point (1) in my message.
    The system did not generate any FI document, this is exactly the unexpected problem that I am trying to solve.
    Any further suggestions?
    Kind Regards,
    Arjan

  • Error message when posting revaluation "deprecation not posted completely"

    Hi Gurus
    When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
    I have run AFAB for period 01/2010 and the entry in TABA is correct.
    Can any one help me solve this?
    Thanks
    Gil

    Hi
    I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
    I have ran AFAR, and it didn't have any effect

  • Error AAPO191 in AFAB: depreciation posting run

    Hi,
    I created a new depreciation area and customized the account determination on AO90. When running the AFAB (dep. posting run) the system issues the error AAPO 191 "Internal error in item 0000000000: asset row is not complete"
    I checked the note 859617 which says the accumulated depreciation account must not be set as fixed asset reconciliation account.
    As far as I know, these accounts have to be set as reconciliation accounts otherwise it will be open for manual postings leading to inconsistencies between FI-AA and FI-GL.
    I checked transaction OAMK and it has some accounts in it (but not the ones with errors). Nevertheless, it has no option to include new accounts.
    Can anyone help me out with this error?
    Thanks in advance,
    Paulo Siqueira

    Hi Paulo,
    this error is nearly always about wrong or missing  account control in your account determination. Please check closely     
    note 7595 and verify if any account has been erroneously defined or  is missing.                                                                               
    As per note  7595:                                                                               
    1. Areas to be posted in dialog   > T093-BUHBKT = 1                                                                               
    The balance sheet accounts and the accumulated depreciation accounts must be characterized as reconciliation accounts of account type   'A'. Down payment account KTANZA must also be a reconciliation                                                                               
    2.  Areas to be posted periodically or areas only relevant to  depreciation  -> T093-BUHBKT = 2                                                                               
    Create the accounts of these areas as ordinary G/L accounts.  They may not be reconciliation accounts.   
    Regards Bernhard

  • Depreciation Document Not Posted

    Hi,
    While running the Depreciation Through T-Code AFAB in the Test run Mode Message is given that Test Run Completed but No Document Posted.Where I set The document Type for Depreciation and the Document Range also.Pls Help

    Even in the simulation it create document to dispay (not posted)
    I have the message 3 documents were created.
    Have you other errors?
    Have you set up in config?:
    Financial Accounting / Asset Accounting / Integration with the General Ledger/Additional Account Assignment Objects
    - Activate Account Assignment Objects
    - Specify Account Assignment Types for Account Assignment Objects

  • Depreciation is not posting in ECC6 upgrade

    Hi
    I am on tech upgrade 4.5b to Ecc6. Depreciation is not posting by AFAB first error was doc number range is defined external and this should be internal.
    I have changed this AF doc type number range 03 as internal number range but still depreciation is not posting.
    regards
    imdad

    Hi,
    Please share the error message you are getting at the time of Depreciation run.
    Thanks and Regards
    Binoj M D

  • K7n2 Delta-6570 Will Not Post

    I have k7n2 delta L --6570--amdxp-2500-512 mb pc3200 ram. powmax 400w power .ati 9600 all in wonder. I swapped all parts to a better case to fit a certain location and the system will not post at all. the diagnostic d-bracket has number 1 and 4 in red while 2 and 3 are green. the book only tells me that the processor is initializing with a note saying this will show information regarding the processor (like brand name, system bus. etc. but nothing will show on the monitor. everything was working fine before the swap. i have checked everything i can think of. i would appreciate some advise. sorry if i haven't posted all the proper requrements and spec's. thanks. paul k.

    i reset the memory and cpu and video card. i think i disconnected everything in the case a couple of times to make sure it wasn't a simple blunder. nothing! i have a friend that wants to try look at it i may do that. also tomorrow i will try to post all my info like the rest of you guys have done. i'll give it a try anyway. also i done the other things you mentioned, i forgot what the questions were. you can't see the post info that i am replying to keep checking so i can answer properly and i forget things.
    thanks
    paul k.

  • List of materials from the excel which are not posted

    I have written bdc,
    that ware house storage locations should not be allowed.
    All the storage locations in the table T320 are ware house storage locations.
    so i have written
    if not  it_data1 is initial.
    SELECT *  into table iT_320 FROM  T320
      for all entries in it_data1
    where WERKS = it_data1-werks and
               LGORT  = it_data1-lgort.
    endif.
    LOOP AT IT_DATA1 .
      read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                              lgort = it_data1-lgort.
      IF sy-subrc = 0 .
        delete it_data1 index sy-tabix.
      ENDIF.
    endloop.
    So its working fine till then.
    but i wanted a list of materials from the excel wch are not posted,so tht the user is aware tht some items are not consumed.
    How to display that list in bdc.
    Please give the code for that.

    MY EXCEL DATA IS IN IT_DATA1.
    LOOP AT IT_DATA1 .
      read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                              lgort = it_data1-lgort.
      IF sy-subrc = 0 .
        delete it_data1 index sy-tabix.
      ENDIF.
    endloop.
      LOOP AT IT_DATA1 .
        MOVE-CORRESPONDING IT_DATA1 TO IT_DATA_h.
        Collect it_data_h.
      ENDLOOP.
      Clear it_data_h.
    clear : it_data1.
    THEN MY BDC IS LIKE THIS.
    LOOP AT IT_DATA_H .
    perform bdc_dynpro      using 'SAPMM07M' '0400'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RM07M-WERKS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MKPF-BLDAT' LV_DATE  .
    perform bdc_field       using 'MKPF-BUDAT' LV_DATE.
    perform bdc_field       using 'RM07M-BWARTWA' '261'.
    perform bdc_field       using 'RM07M-WERKS' IT_DATA_H-WERKS.
    perform bdc_dynpro      using 'SAPMM07M' '0421'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSEG-WERKS(03)'.
    CLEAR : FLAG1, W_FLAG.
    LOOP AT IT_DATA1 WHERE aufnr = it_data_H-aufnr.
    W_FLAG = 1.
    CONCATENATE 'MSEG-MATNR' '(' W_FLAG ')' INTO W_MATNR_C.
    perform bdc_field       using  W_MATNR_C
                                   IT_DATA1-MATNR.
    CLEAR : QTY.
    QTY = IT_DATA1-ERFMG.
    SHIFT  QTY LEFT DELETING LEADING SPACE.
    END LOOP.
    NOW HOW TO COMPARE THE MATERIALS IN EXCEL AND  BDC POSTED.
    PLEASE PROVIDE THE CODE FOR THAT AND HOW TO DISPLAY.

  • AMD Athlon XP 2800 (Barton Core) will not post at FSB 166 MHz.

    Per top of the board “stickys” I have read a great number of the post on this board and done my homework to provide as much technical info to help you help me. This should explain some of it’s lengthy nature.
    Aside from Memory, HDD and Video card every thing else has been unplugged from board and power or stripped out of slots to isolate the problem.
    Presently running BIOS: A6712 V. 1B
    *As seen on face of MoBo: KT4V MS-6712   Ver:10A
    *The Original Box bar code label: KT4V-L (601-6712-050)
    K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
    CPU: AMD Athlon AXDL 2800 DLV4D 
    Q334763K40034  AQYHA 0447APMW
    Chip lable
    Athlon XP (Barton) Low Power Processor (Model 10) 2083 MHz
    OPGA Organic Pin Grid Array 1.50 Volt max. Temp. 85°C
    512 KB L2 Cache 333 MHz System bus (166 MHz FSB) x 12.5
    Memory: x3- PC 2700 512 mb DDR 333 Super Talent
      And shows at post as running 333MHz. MemTested to 1,000% with first 1 stick, then all 3 sticks presently on bios A6712vms.1B0. at fsb 100MHz (aprox. 24hr.) I even installed and ran other AMD utillitys while MemTest was running to “stress” the system memory with zero errors. During this period I checked Windows Task Manager > Performance, CPU usage at 100%, PF usage 1.35gb. No Probs.
    Video card: Removed: MSI AGP-8X Ti4200- VTD8X 128 MB DDR 533MHz
    Replace with: PCI card (to rule out AGP card prob.) Gilmont, nVidia 64mb
    (also tried Matrox AGP 32mb card with no different results then above cards)
    Power Supply: L&C Model: LC-B350 ATX = 350 watt
          115/130v      B/4a      60/50 hz
          +3.3v/+5v   1+12v   -12/-5v    +5vsb
          28a   35a    16a    0.8a    0.3a   2a
       +3.3v combined load 200w
    Cooler: Slim Volcano 10+,   P/N A1671,  rated for up to AMD Athlon CP 3400+ & fresh heat sink compound. Freshly re-seated.
    All PCI  slots empty as I attempt to run bare bones to eliminate problems. (except now running Vido card in 1 slot)
    Floppy Drive: ribbon unplugged from board
    HDD-0: Seagate 8 gb master, (HDD tested w/no errors)
    O/S: Win. XP w/sp2
    HDD-1: slave/  unplugged from ribbon and power
    Sony CD-Rom: Unplugged from PCI slot and power
    SATA/RAID-usb 2.0 card and other HDD’s, removed and not included till Sys. runs at full potential.
    Exterior HDD and Burner beyond the scope here and not attached.
    O/S Win. XP-sp2
    BIOS I have tried: The original; Ver:10A, ran fine on Athlon XP 1600 (1400 MP) 3 years.
    •   Then with MSI Live Update 3: Installed v. 1c which couldn’t run FSB 166MHz (MSI:” Fixes system reports incorrect message for AMD 3200+ CPU.
    - Supports Sempron L2 512K 3000+ CPU.)
    However, v. 1.c did not work and would not post at all with the newly installed Barton AMD-XP 2800. [frankly this attempt was months ago and I do not remember whether it would post at the slower 100 and 133 FSB speeds, and also to muddle my memory further I was upgrading an A7N8X-D with a Barton XP 3000 and having similar problems on the ASUS,,, which is now running fine at full potential. ; - p
    •   Then I selected and flashed A6712 V 1.7 122602, boots and runs Win.XP-sp2 at FSB 100MHz & 133MHZ.  (MSI:” Supports AMD Barton XP2800+ (FSB333) CPU
    -Fixes system sometimes will have IDE CRC error   -Fixes D-bracket2+USB keyboard, cannot use keyboard on DOS mode.)”    which couldn’t run FSB 166MHz.
    I checked with the Tech. at the local shop where I purchased the KT4V MoBo. He suggested I try a different BIOS but he didn’t specify which one. He is a personal friend and admits to some bad luck and dead boards due to flashing bios so reluctant to mess with it.
    •   Now running:  A6712vms.1B0 – MSI hid this BIOS V. found here:
    •   http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=362&kind=1
    •    On a different page than the 2 versions mentioned above. http://www.msicomputer.com/support/bios_result.asp
    •    No wonder people are frustrated and confused about different MoBo versions there ID #’s and the BIOS versions them selves as seen on this news board. MSI’s fault, no fault of anyone here trying to help.
    A6712vms.1B0
    Runs fine at FSB 100 (shows as XP 1250+) and FSB 133 (shows as XP 2200+) Booting to Win. XP-sp2 on CMOS, default setup other than minor tweaks to accommodate MSI Ti 4200 AGP 8X 125mb graphics card or Gilmond PCI card. But which couldn’t run FSB 166MHz .
    No post at FSB 166 mhz (once, it did flash a post screen stating AMD Athlon XP 2800 for about 2 sec. before going blank) Manual power down. Just now I rebooted with FSB 166, and again saw the AMD Athlon XP 2800 at top of the post screen as I hit pause break,,,, then the machine power crashed to Off. Once it even loaded Win.XP-sp2 but crashed to power off with in 2 min.
    I must have booted this beast a dozen times or more after Clear CMOS jumper each time it went to blank screen with mach. still running. Start over; set Default settings and work up with FSB 100, 133, each time to read what POST says and see if it will boot to O/S.
    Btw: I have looked for clear evidence through the not so specific descriptions MSI uses to separate these board model #s and may be part of my current problem with correct board ID = correct BIOS ID.
    Found here:
    [VIA] unofficial FAQ for KT4 series motherboards
    https://forum-en.msi.com/index.php?topic=6090.0
    Eg: - KT4 Ultra (MS-6590), 6-channel hardware audio codec
       • KT4 Ultra (Pure Version)
       • KT4 Ultra-B (Bluetooth ready)
       • KT4 Ultra-BSR (Bluetooth ready + Serial ATA RAID)
       • KT4 Ultra-FISR (Bluetooth ready, Serial ATA RAID, Gigabit LAN, IEEE 1394)
    - KT4V (MS-6712), 6-channel software audio codec
       • KT4V-L, with onboard 10/100 LAN
    - KT4M (MS-6596) micro-ATX board
       • KT4M-L, with onboard 10/100 LAN
    - KT4A Ultra, (MS-6590) NEW!! based on KT400A chipset
       • KT4A Ultra (Standard Version)
       • KT4A Ultra-SR (Serial ATA RAID)
       • KT4A Ultra-FISR (Serial ATA RAID, Gigabit LAN, IEEE 1394)
    And a very similar version of this on Official MSI site. Both seem to try and make a difference between modles with on board Lan, and Blue Tooth ready.
    Take a look at my original box sticker:
    *As seen on face of MoBo: KT4V MS-6712   Ver:10A
    *The Original Box bar code label: KT4V-L (601-6712-050)
    K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
    Yup, it says all this on the sticker and the in the manual and verified on the MoBo. So I can only guess at all parts of the puzzle as they gave them to me which lead me to the afore mention BIOS versions I ran, or am running. The sticker points to nearly half of the boards above except for the MS-6712 and the Ver:10a which is what I based my BIOS choices on. If someone knows differently and can lead me to official Nfo with a better answer I’m all ears.
    Just saw this: Latest Official BIOS : KT4 MS-6590 (1.4), KT4V  MS-6712 (1.8 ) , KT4M MS-6596 (1.1)>>Here: [VIA] unofficial FAQ for KT4 series motherboards
    « on: 24 October 02, 05:14:04 »  But these links and all but one link in this ‘sticky’ are broken .
    So if  (1.8) is the Latest Official BIOS for KT4V MS-6712  then what is this at the Official MSI SITE ?
    KT4V
    BIOS Type
    AMI® BIOS      File Sizes
    485KB
    Version
    1.C      Update date
    Update Description   -Support Sempron L2 512K 3000+ CPU.
     BIOS Type
    AMI® BIOS      File Size
    Version
    1.B      Update date
    2004-8-9
    Update Description   Support Sempron 2200+/2300+/2400+/2500+/2600+/2800+ CPU.
        BIOS Type
    AMI® BIOS      File Sizes
    485Kb Version
    1.A      Update date
    2004-5-13
    Update Description   - System is unstable to run 3DMark03 with ATI 9600 PRO
    - Add "PS/2 Keyboard Detection" Function.
    - Support AMD 2400+ CPU.
    BIOS Type
    AMI® BIOS      File Sizes
    514KB
    Version
    1.9      Update date
    2003-7-29
    Update Description   -Fixed Adaptec 2100S SCSI card cannot be used
    -Modify CPU temperature detection
    -Support boot from Onboard LAN
    BIOS Type
    AMI® BIOS      File Sizes
    514KB
    Version
    1.8      Update date
    2003-2-12
    Update Description   -Support AMD Barton XP3000+ (FSB333) CPU
    -Add "CPU Halt Command Detection" item in the BIOS Setup
     Please also keep in mind I’m not trying to scuff anyone’s shoes…I just want to get what’s right for my board so that it and the CPU can live up to their full, "as advertised" potential and run with the other 3 big dogs under my desk.
    This seems descriptive enough and rather lengthy. Just doing my homework and reporting my findings so I won’t include actual CMOS settings unless requested. I have notes on all settings I currently use to boot with this problem.
    Other Dogs:
      ASUS A7N8X-D running Athlon XP 3000 barton core 10 (runs fsb 400..whoknew?), Mem:2.5gb Super Talent
       ASUS A7M266-D running Athlon XP 2800 (mp), Mem: 3gb Super Talent
                                                   Athlon XP 2800 (mp)
      I don’t want to boar you with the details.
    Yes, and the above have been upgraded w/new chips GFX cards and BIOS,,, NP.
      Cut to sound track: Down on the BIOS again,,, wasn’t that Creedance Clear Water Revival?
    Any suggestions or insights are much appreciated. 

    Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
    Quick version: Try setting processor voltage to 1,5 volt.
    Long version:
    Posting at wrong FSB can be put down to two things:
    1 The processor isn't what you thought it is, but I think you eliminated that.
    2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
    You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
    At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
    http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

  • MSI Big Bang Xpower II did not post - Debug LED Code #67

        
    I need HELP...!
    I have a problem my board did not post , did not start and i have the DEBUG LED CODE # 67 displayed.
    There is my build
    MSI Big Bang Xpower II X79 LGA2011
    Intel Core i7 3820 LGA2011 Processor
    Corsair Cooling Hydro Series H100 CPU Cooler System LGA2011
    G.SKILL Ripjaws Z Series memory (F3-12800CL-32GBZL) DDR3 1600 PC3-12800 - CL10-10-10-30 (8192MB X 4) - 32GIG located in DIMM 1-3-5-7
    Gigabyte GTX570 OC Edition video card in slot PCI-E2
    Western Digital Velociraptor 300GB 2.5" SATA 3.0Gb/s 10,000 RPM
    LG BH12LS35 Blu-Ray Writer 12X BD-R 16X
    Ultra LSP-750 Power Supply
    Cooler Master HAF X EATX Tower Case
    When I put the power on, the power supply activated fans and drives spin, all the LEDs on the motherboard light up but nothing appears on the screen.
    No video signal at all and the computer stop and restrart every 15 seconds. When these reset occurs there is no beep on the speaker , nothing at all, no flashing screen either, nothing.
    The DEBUG LED display a sequence of flashing numbers 19 - 60 - 19- 60 - 67 and stop showing still the number # 67 for about ten seconds and then he reset again.
    I carefully followed the instruction manual for the installation, I installed the memory modules in slots 1 3 5 7, i put my video card in slot PCI-E2. all the power wire are connected correctly 1 x 24 pins ATX, 2 x 8 pins ATX, 1 X 6 pins , all the wire from the front panel are correctly connected to the m-connector in JFP1 & 2.
    Did i forget something, I don’t know what the debug led code # 67 exactly mean and what i have to do to fix-it
    Someone has an idea what is wrong or have any suggestion to solve this issue.
     Thank's all for your help.

     
    I followed some advice to remove the memory modules and this is actually caused by the use of memory but you will see I still have a curious bug.
    I referred to the instructions manual to the letter for the choice of DIMM SLOT to put the memory module in single, double, triple and quad channels.
    If I install 1 memory module in the DIMM SLOT  1 to operate in single channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install 2 memory modules in  DIMM SLOT  1 & 3 to run in dual channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install three memory modules in DIMM SLOT 1 - 3 - 5 to run in triple channel, everything is normal and the motherboard POST normally and show  the SETUP SCREEN.
    As soon as I install four DIMMs modules mémoiredans SLOT 1 - 3 - 5 - 7 to run in quad channel, the motherboard  freezes and does NOT POST and show  code 67 on the debug led and has reset itself every 20 seconds.
    I tried all my RAM modules alternately in both single channel and everything works normally.
    I did the same thing in rotation for both dual and triple channel and everything is still normal with all fourth memory modules individually.
     As soon as I put a fourth memory module it freezes and displays the code 67 or L9 dependent side as you look. 
    So my bug is my motherboard MSI Big Bang Xpower II do  not want  to work in quad channel.
    Do you have any idea where I should look for, is a setting in the BIOS  , I have flashed the bios to the latest version V1.5
    I included the screenshot of the BIOS to see if you can  notice something wrong. 
    Thank you

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • Invoice Parked not Posted

    Dear All
    Do we have a standard report where I could get the report for document is parked but not posted plant wise not Company code wise.
    Or if any other option do generate this report.
    Regards
    Manoj

    Dear Manoj,
    If you assign workflow for diffrent users to complete invoice document , user automatically get the list of parked invoice in his mail box which can help you to find out the parked invoices but not posted.
    If found useful reward point.
    Vivek Maitra

  • Accounting documents are not posted for Excise invoice

    Hi,
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    2. where we will maintain number ranges for excise invoice..?
    Thanks
    Rao..

    hi
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    Not sure but can u try to relese this to accounting
    2. where we will maintain number ranges for excise invoice..?
    Excise invoice number range is depend on Excise series group.
    T-Code : SNRO
    Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
    J_1I57FC - 57FC Number Range
    J_1IARE1 - ARE1 Doc No object based on Series Group
    J_1IARE3 - ARE3 Doc No object based on Series Group
    J_1IBOND - Excise Bonding: Bond number object
    J_1ICERT - Withholding Tax Certificates (India)
    J_1ICHLNNO - Internal number range for challans
    J_1ICONPLA - Consolidated PLA serial no. generation
    J_1IDEPINV - Excise Invoice Number for Depot Invoices
    J_1IEXCEXP - Export excise invoice number range
    J_1IEXCINV - Excise invoice number
    J_1IEXCLOC - Local excise invoice numebr range
    J_1IEXCTST - Excise invoice with intervals
    J_1IEXINEX - Excise invoice number for export
    J_1IINTNUM - Internally document number to be generated
    J_1IINTPR2 - Despatch serial number
    J_1ILIC - Excise Bonding: License number object
    J_1IPLA2 - PLA part II number range object
    J_1IRG1 - RG1 Number range object
    J_1IRG1_T - No. Range for RG1 - Excise group / Material
    J_1IRG23A1 - RG23A part 1 no. range object
    J_1IRG23A2 - RG23A part II number range object
    J_1IRG23C1 - RG23C part I number range object
    J_1IRG23C2 - RG23C part II number range object
    J_1IRG23D - Folio Numbers for RG 23D
    Check the link
    Re: Excise Invoice Number Range
    excise invoice and domestic invoice sharing same number range

Maybe you are looking for