AFAR - Recalculate Deprec. Auto run in user exist ???

Dear all,
I change the Book Deprec. then I used the T.code : AW01N.
SAP will tell me the message : manually run AFAB to adjust diff. data.
So. have any user exist .
I can insert ABAP code to AUTO. run the AFAB. before AW01n, or after Asset create (AS91) ?
Thanks for your help in advance.
DDT

We implemented Fixed Assets in SAP March 1, 2009. We set our transfer
date to 2/28/09. Our tax department has a need to make changes to the
depreciation lives and methods of assets that were capitalized in
2008. We have used the Mass Change functionality to make the changes
but can't get the depreciation to recalculate based on these new lives
and methods. Transaction code AFAR (program RAAFAR00) does not allow
us to recalculate depreciation for 2008. We found OSS Note 646691 and
applied it to our DEV system. This note allowed us to change the year
in table T093B to 2007 thus allowing the recalculation of depreciation
to take place. We then applied the note to our TST system working our
way up to PRD but the recalculation program does not do anything in
TST. We don't get an error message or anything it just does not
recalculate the depreciation at all. Is there another note that I need
to apply in order to get this Note working correctly.
Any help you can provide would be greatly appreciated.

Similar Messages

SSRS 2008 R2 Report parameters have default values and report not to auto run

Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
Ione

Hi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

Autologin as user, auto run application as admin

Hello, I am just trying to figure our if there is a solution for my problem. I do not want to give the user full admin rights.
Every time when Windows Server 2012 reboots, I need a user to login automatically and one of the applications should run.
I am able to login after server reboots, the problem is with application. It has to run with full admin rights. If I try to configure to always run it as administrator, it asks for the admin's password. It should run automatically, so I cannot
enter the password after reboot.
Any ideas? Or should I give the user full admin rights? I do not want to do this.
Thank you.
Thank you. Eric.

Hi,
Based on my experience, there is no build-in way to allow a standard user to run as Admin. For more detailed information, please refer to the similar
thread below:
Auto run as admin in non admin accounts
http://social.technet.microsoft.com/Forums/en-US/59f91c21-0d1c-47e2-ad6f-1272000fc5ee/auto-run-as-admin-in-non-admin-accounts?forum=winserversecurity
In addition,
you should only allow an application that you trust to run as administrator because the application will have full access to your computer.
If you don’t want to
configure an application to always run as an administrator, you can right-click the application’s shortcut
and make change in the Compatibility tab of the Properties dialog box.
Best regards,
Susie

"Auto stop" and "Auto Run" function exist?

"Auto stop" and "Auto Run" function exist?

many thanks...
full of ????
cracking this project issue...
Attachments:
AMK_solar monitoring system.vi ‏1451 KB
datalogger.vi ‏26 KB
Start.vi ‏22 KB

How to get currently running tcode inside the user exist

Hi All,
I want to write user exist for me22n & me23n, inside the user exist i want to check tcode whether tcode is me22n or me23n my user exist is ME_PROCESS_PO_CUST
.please help me
Thnx//

Hello Gevan,
Please check the value of sy-tcode for both transaction in debugging mode in the exit and write your code accordingly.
case sy-tcode.
when 'ME22N'
*ur code
When 'ME23N'
*ur logic
endcase.
find the screen shot from debugging
Thanks

How to set Lion built-in FTP Server auto run off

Hello all.
I set FTP Server by using Rumpus Server application.
But Lion's built-in FTP Server is running on the front.
So if I try to connect my FTP Server out of my LAN, I can only connect to the built-in FTP Server despite I wanted to connect Rumpus FTP Server.
It can be solved by unload the built-in FTP Server(using sudo -s launchctl unload...) but every after rebooting I should set it because it is set to run automatically in every booting.
How can I set the auto run off?

well, the ftp server (=ftpd) takes account info from the user list for your mac. so, go to the system settings on your mac, then to users, and then just add another user with a password of your choice (tap on the little plus-sign to add a user!). this will then be a valid user for your ftp server after you restart your ftp server.
the other thing you want to do, about the home directory, is called chroot. you can set the home directory of a specific ftp-user to be another directory then the standard. for this, there are configuration directives in the configuration file in /private/etc/ftpd.conf which you have to edit by hand. so make sure what you do there.
you should read this before editing the file, this will give you a better understanding of what to put there: https://developer.apple.com/library/mac/documentation/darwin/reference/manpages/ man8/tnftpd.8.html

New GL User Exist or Enhancement

Hi SAP Expert
Currently i have a problem to use New Ledger in my client ECC 5.00
HQ Company using 544 calender for FI closing
1 of the coutry need to use Month Calender for FI Closing
When i do testing on FA depreciation run using tcode AFAB, i cannot specify the Posting date into the
depreciation posting date and i need to post to correct period.
Do u know whether in New Ledger / New GL have a user exist or enhancement we can change the data in
table FAGLFLEXT or FAGLFLEXA in the specify ledger ?
regards

Hi Heng,
Did you manage to get answer to your query "Do u know whether in New Ledger / New GL have a user exist or enhancement we can change the data in
table FAGLFLEXT or FAGLFLEXA in the specify ledger ?"
I have a similar requirment to substitute split line items that appear only in New General Ledger view ie in table FAGLFLEXT or FAGLFLEXA?

Checking to see whether a user exists in a Windows Active Directory

I have a little java applet that has to run through a large list of users, and for one of its tasks, it has to check to see whether that user exists. Mostly this is the same as running with local users, with the one exception that I can't just check to see if a home directory exists.
Right now I am checking the return code from "net user <username>", but executing this program for every potential user is extremely slow.
Are any java facilities to deal with users on the local system? If not, does anyone else have any suggestions?
Also, a note for any responses- I'm using java to get around the lack of any easy way to set up a good scripting environment on Windows. I have a completed tool, and I don't want to rewrite it.

<sarcasm>
I seem to remember this service - what's it called? Ah, Google. Yes.
</sarcasm>
Try http://www.google.com/search?q=java+active+directory+query

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Need User Exists

Hello Friends,
i need User Exists for PR,PO,MIGO,MIRO Creation transactions , i need to save data in one Custom table for all these transactions. so that i can details for purchase life cycle from refering the single table . i donot require to refer all other tables.
similar way for SD Transactions ,,
if any of you came across these type of reqirement, just guide me
Thanks and Regards
Kumar M

Hi,
Migo User exits:
Enhancement/ Business Add-in            Description
Enhancement
MB_CF001                                Customer Function Exit in the Case of Updating a Art. Doc.
MBCF0011                                Read from RESB and RKPF for print list in MB26
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009                                Filling the storage location field
MBCF0007                                Customer function exit: Updating a reservation
MBCF0006                                Customer function for WBS element
MBCF0005                                Article document item for goods receipt/issue slip
MBCF0002                                Customer function exit: Segment text in article doc. item
Business Add-in
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL                    BAdIs when Creating an Article Document (SAP Internal)
MB_DOCUMENT_UPDATE                      BADI when updating article document: MSEG and MKPF
MB_DOCUMENT_BADI                        BAdIs when Creating an Article Document
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04                         posting of gr
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE                     Check Add-On-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK                     Check Add-On-Specific Criteria for MM_MATBEL
Miro userexits:
Enhancement/ Business Add-in            Description
Enhancement
LMR1M001                                User exits in Logistics Invoice Verification
LMR1M002                                Account grouping for GR/IR account maintenance
LMR1M003                                Number assignment in Logistics Invoice Verification
LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006                                Logistics Invoice Verification: Process XML Invoice
MRMH0001                                Logistics Invoice Verification: ERS procedure
MRMH0002                                Logistics Invoice Verification: EDI inbound
MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
MRMN0001                                Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification
PO userexits:
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number
Business Add-in
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_MMPUR_EINM_CUST                      BAdI Methods for Processing IDoc Data in the SUS Scenario
ME_MMPUR_EINM                           BAdI Methods for Processing IDoc Data in the SUS Scenario
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
MM_EDI_ORDERS_OUT                       Enhancements for IDoc Output of Purchase Order: Internal
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_EDI_DELFOR_OUT                       Enhancements for IDoc Output of SA Releases: Internal
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_PURCHDOC_POSTED                      Purchasing Document Posted1
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_IBS                          BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CUST                         Customer BAdI for Enjoy Purchase Requisition BAPIs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_IBS                          BAdI for Inbound/Outbound Mapping BAPI_PO_CREATE1 IBS
ME_BAPI_PO_CUST                         Customer BAdI for BAPI_PO_CREATE1 and BAPI_PO_CHANGE
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
SMOD_MRFLB001                           Control Items for Contract Release Order
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_CIP_REF_CHAR                         Facilitates Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring site
If these helpful rewards points
Regards
Pratap.M

Slideshow auto run issue?

I notice that when you create an auto run slideshow, if you include thumbnails or back and forward arrows, once the thumbnails or arrows are used - thus interrupting the auto run - the show does not restart to auto run afterwards and there is no play button to re start it?
Phil

Hello Phil,
It is the expected behaviour of Slideshow. When an autoplay is interrupted then it cannot be started again.
The only options in that case for user is to either use the back and forward arrows or refresh the page to start the slideshow again from the beginning.
Regards,
Sachin

User Exists In Sales Order Creation Program for adding "Reason For Reject"

Hi gurus
I have following requriement
As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
This is then can be removed in change (VA02) with Mass change.
We need this to review the sales order / block sales order from MRP run.
Please let me know how to manage this or is there any user exist for the same.
Thanks
Sunil K

Hi,
As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
manual way is what is described below:
You can either reject the whole sales document or individual items.
Reject all items:
If you want to reject all the items, choose Reject document in the change modus for the sales document.
The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items:
If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
A dialog box appears in which you can enter the appropriate reason for rejection.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items with different reasons of rejection:
If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
You can enter a different reason for rejection for each item in the Reason for rejection field.
regards,
Siddharth.
Edited by: SD on Mar 15, 2008 10:22 AM

SLiM not auto loggin in user

I installed SLiM so that I could auto login my user and have used it before but for some reason on this machine it won't auto login my user.
I have made the adjustments to the /etc/slim.conf for the default_user and change the auto_login to yes.
I've been unable to find a reason why it won't login so am hoping someone might be able to assist me to sort this out.

here is the file:
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user media
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log

Auto run jregistry

I've been messing around with JMF quite a bit lately and am really liking, there are a few things I am stumpped on and can't find much on the subject.
I don't like how I have to run the jregistry to find new capture devices, is there anyway that you can auto run it when you start your app, so the user won't have to manually open it and run it?
Thanks in advance

You can search in the source code of JMFRegistry class

Auto run file for installation of HP Officejet 8500 Pro A909g Missing from driver download

I have a HP Officejet 8500 Pro A909g. I downloaded the new Windows 8.1 64 bit driver as 8.1 would not allow the scanner to operate on the existing driver. Printing was fine. When i went to install the wizard, auto run file for the wizard is missing and so the installation can not run and instal the new driver.

Hello IanHP8500,
Welcome to the HP Forums.
I see that you're having an issue getting your Officejet 8500 scanning on Windows 8.1. I will do my best to help you with this issue.
Did you upgrade to 8.1 from an older version of Windows?
If so, with it not scanning correctly. You can try just removing the HP Solution Center from programs and features.
Go to the bottom left corner of your screen right click on the Windows icon> go to Control Panel> Go to Programs> uninstall Solution Center if it's listed.
Next, instead of using the printer install wizard. Download the software from this link: HP Officejet Pro Full Feature Software and Driver. Let it run through, it should prompt to " add more software". This should allow you to reinstall Solution Center.
If you run into issues, there is something you may have to do. If you get a file missing error here, or the install hangs check your computer for the following.
McAfee Live Safe - Disable the "Realtime Scanning".
Check for and remove HPOINS*.dat or HPWINS*.dat. Here is a link to a post by JonW on how to do this: Re: installer setup hangs under Windows 8.1.
Try all of this, and let me know how you make out. Thank you for posting on the HP Forums.
I worked on behalf of HP.

AFAR - Recalculate Deprec. Auto run in user exist ???

Similar Messages

Maybe you are looking for