Afaria 7 SP5 enrollment server upgradation stops at 50%

Hi Everyone,
Need you crucial inputs in following issue:
We have redundant Afaria ennvironment below are the server box setup:
DB (Cluster Mode)
MST1 (Afaria Server, Enrollment Server and Package Server)
MST2 (Afaria Server, Enrollment Server and Package Server)
IIS 1 (Afaria Admin and API and Selfserviceportal)
IIS 2 (Afaria Admin and API and Selfserviceportal)
Relay Server 1 (NLB)
Relay Server 2
Threat Management Web Gateway 1
Threat Management Web Gateway 2
Our currrent version of Afaria is Afaria 7 SP4 HF12.
Issue as below:
We installed SP5 Pre-requisite i.e. 2012 Visual runtime etc.
We tried to upgrade Afaria to SP5, we successfully upgraded Afaria Server and Admin and API.
However, we tried to upgrade enrollment server it stuck on 50 percent. After which the upgradation process wasn't getting processed.
Performed Troubleshoot:
1) We re-installed Afaria enrollment server with Afaria 7 SP5.
Regards,
Subash Acharya

Hi Subash,
Have you tried running the iPhoneServer (Enrollment server) setup in both MST1 and MST2?
If yes, Is the same issue occuring in both? If no, please try running it in the other machine too.
Isn't there any specific error while running the setup?
If yes, pls show the screenshot. Also, please check the event logs to see any log entry at that time instant.
Have you tried restarting the machine and then running the setup?
Best Regards
Sajan Mathew

Similar Messages

Crystal Report Server Upgrade XI R2 SP2 to XI R2 SP5, setTableLocation fail

I upgraded Crystal Report Server Crystal Reports Server (Enterprise) XI R2 SP2 to Crystal Reports Server (Enterprise) XI R2 SP5.
Before Upgrade, Reports were generated properly, but after that, I got the following Error.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: The table 'AP_GL_R216' could not be found.
Error in File C:\WINDOWS\TEMP\{325E2C60-E2FE-4E1B-9291-E607283AE07A}.rpt:
The table could not be found.---- Error code:-2147482939 Error code name:failed
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.cd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.bj.for(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.u.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
at com.iflex.fcr.bh.reports.FCRJReporter.setReportDB(FCRJReporter.java:945)
FCRJReporter.setReportDB Code is as follows.
Table oldTable = (Table)tables.getTable(x);
                         Table newTable = (Table)tables.getTable(x);
                         //create a new ConnectionInfo object
                         ConnectionInfo conInfo = new ConnectionInfo();
                         conInfo.setKind( ConnectionInfoKind.from_int(5) );
                         conInfo.setUserName(db_username);
                         conInfo.setPassword(decrPassword);
                         //create a Property Bag for the Connection Info attributes
                         PropertyBag pBag = new PropertyBag();
                         //          set the property bag values
                         pBag.putStringValue("QE_ServerDescription",serverName);
                         pBag.putStringValue("QE_SQLDB", "true");
                         pBag.putStringValue("QE_DatabaseType", "ODBC (RDO)");
                         pBag.putStringValue("QE_DatabaseName", "");
                         pBag.putStringValue("SSO Enabled", "false");
                         pBag.putStringValue("Database DLL", "crdb_odbc.dll");
                         //          create a property bag for the 'QE_LogonProperties' key
                         PropertyBag logonProps = new PropertyBag();
                         //          set the properties for the logonProps PropertyBag
                         logonProps.putStringValue("DSN", databaseName);
                         logonProps.putStringValue("UseDSNProperties", "false");
                         //          add the logonProps PropertyBag to pBag
                         pBag.put("QE_LogonProperties", logonProps);
                         //          set pBag into the conInfo attributes
                         conInfo.setAttributes(pBag);
                         newTable.setName(oldTable.getName());
                         newTable.setAlias(oldTable.getAlias());
                         newTable.setQualifiedName(db_username.toUpperCase()+"."+oldTable.getName());
                         newTable.setConnectionInfo(conInfo);
                         System.out.println("Start TableLocation" + newTable.getQualifiedName());
                         report.getDatabaseController().setTableLocation(oldTable, newTable);
In last line this is failing to Execute, with SP2 there has been no problem.
Thanks,
Jitendra
Edited by: JitendraS on May 26, 2010 3:10 AM
Edited by: JitendraS on May 26, 2010 3:10 AM
Edited by: JitendraS on May 26, 2010 3:15 AM

I found two documents on SAP website for Supported Platforms of both CR XI R2 SP2 and CR XI R2 SP5.
CR XI R2 SP2u2013
Link: http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/00225757-ab5c-2c10-c1a8-fb9f9f0f4ac2?quicklink=index&overridelayout=true
Page 7
Supported Application Servers>> Details
Oracle Application Server 10gR3 (10.1.3)
JDK 1.5.0_xx
CR XI R2 SP5u2013
Link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10ca2a2b-e478-2c10-53bf-9534ee116522?quicklink=index&overridelayout=true
      Page 5
Supported Application Servers
Oracle OAS 10G Rel.2 (10.1.2)
JDK 1.4.2_xx
why Supported Application Server Version downgraded in SP5?

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

Sync Server has stopped working

Hi,
I upgraded my iPhone to IOS 4.0.1 today. Since the upgrade, whenever I try to sync my iPhone I get an error message stating "Sync Server has stopped working". The sync continues, then I get another error message stating "iTunes could not back up the iPhone because an unknown error occurred (-20).
I am using iTunes 9 on Vista..
Any Suggestions folks?

Hi,
I upgraded my iPhone to IOS 4.0.1 today. Since the upgrade, whenever I try to sync my iPhone I get an error message stating "Sync Server has stopped working". The sync continues, then I get another error message stating "iTunes could not back up the iPhone because an unknown error occurred (-20).
I am using iTunes 9 on Vista..
Any Suggestions folks?

Server has stopped responding

Hi there, when trying to connect to the internet (Safari) I get an error message that the connection failed because the server has stopped responding. I can connect to the itunes store and the app store. I have re-started the computer, router, app, ipad and it still doesn't work. Any suggestions would be appreciated.
Thanks!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Error inside TicketCreator (EP5.0 SP5 to SP6 upgrade)

Is there anyone having this experience before? Our original portal is EP5.0 SP5, with 1 lockserver box, 2 portal server box. within these portal server boxes, 1 with installation type as "primary" and one as "clustered."
The upgrade from original EP 5.0 SP5 to SP6 is perfectly fine for lockserver and "primary" portal. However, for clustered node, after I have applied EP5.0 SP5 to SP6 upgrade kit, a launch of portal got an error message as "Error inside TicketCreator Failed to create SSO cookie. The cookie returned from the cookie creation URL returned an empty value."
Any tips to this? anyone have encountered this before and how to get it around, thks
Stephen
Message was edited by: Lee Stephen
Message was edited by: Lee Stephen

Hi,
this is my first post in SDN.
I installed EP5SP6 and got the same error message "Error inside TicketCreator Failed to create SSO cookie. The cookie returned from the cookie creation URL returned an empty value.".
I found out that the error comes from the function "CreateTicket(userName)" in the file "TicketCreator.asp" in folder "\inetpub\wwwroot\SAPPortal\Common" (this function is called from "Default.asp" when no "MYSAPSSO2"-Cookie was found); it uses the "SAP J2EE Engine 6.20" in order to create a new cookie (in my case for "userName = admin") by calling the following URL:
http://localhost:8100/irj/servlet/prt/prtroot/InitialLogonSupport.default?IntegrityToken=&URL=
The response header from this URL is the following (Status = 200 => OK):
<i>Server: SAP J2EE Engine/6.20
Content-Type: text/html
Content-Length: 631
Date: Thu, 20 Apr 2006 13:04:56 GMT</i>
The mentioned error occurs because there is no entry in the header with "Set-Cookie: MYSAPSSO2...".
I also found out that the "MSXML4.DLL" is used for calling the above URL, so I modified the function
"CreateTicket(...)" and inserted the following:
if req.status = 200 then
>>> INSERT
CreateTicket = req.responseText
exit function
>>> INSERT
Note: the function "responseText(...)" is defined in the interface "IXMLHTTPRequest" which is implemented in "MSXML4.dll"; you can find out other functions using a "TypeLib viewer".
When I now call the portal again I see a Java runtime exception:
java.lang.StringIndexOutOfBoundsException: String index out of range: 14
Now I realised that something in the URL must be missing; the source for creating the URL looks like that:
url = url & "/irj/servlet/prt/prtroot/InitialLogonSupport.default?IntegrityToken=" & timeStamp & "&URL="
The generated URL (see above) shows that the "timeStamp" must be empty, so the following code must fail:
timeStamp = Server.URLEncode(encoder.TimeStamp(userName))
The "encoder" is an instance of the object "HyRelEncoder":
set encoder = Application("Locator").NamedComponent("HyRelEncoder")
Now I'm at the end because I can't find any further information about the "HyRelEncoder" object. Maybe someone can find out more and help me to solve this problem,
Oliver

POP3 server emails stopped after new update of 503

Last week messge appeared on screen that new update version (14.0.4) available for your mobile Asha 503. I select yes to upgrade my phone from older version to new. after upgrade procedur my office POP3 server email stopped & not working from that time. i contact to my office network administrator to check any possibility to enable my email but he asked me there is no any chance to receive my email because he tried lot of time to re configure but it vain. please help

The easiest way to track this is: Capture the network traffic! This can be done via a:
A) Wi-Fi access point which allows capturing. Alternatively, you go for a
B) Ethernet Switch behind the Wi-Fi access-point which allows port mirroring. A third alternative is to
C) install Connectify on a computer and use that as capturing Wi-Fi access-point
for your Nokia Asha 503.
In all cases, you use tools like Wireshark to analyze the data traffic. However, because you are in contact with your administrator already: Does he see any data packet from your Nokia Asha 503 at all? If not, the Internet configuration could have been damaged while updating. Nokia Xpress browser is using a slightly different configuration, therefore it might not be affected.

[svn] 3718: Make sure the server is stopped even when a unit test fails.

Revision: 3718
Author: [email protected]
Date: 2008-10-17 13:03:17 -0700 (Fri, 17 Oct 2008)
Log Message:
Make sure the server is stopped even when a unit test fails. Thanks to Alex for the fix.
Modified Paths:
blazeds/trunk/modules/core/build.xml

I had the same issue after upgrading from 10.7.2 to 10.7.3 and changing my main SSL cert.
The solution was to make sure the correct cert was listed in:
/etc/openldap/slapd.conf
as well as:
/etc/openldap/slapd.d/cn=config.ldif
It looks as though the slapd.conf file gets updated properly when you select an SSL cert in the Server Admin app, but the cn=config.ldif does not. That is the one that was hanging my server up.
Hope this helps!

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

I would like to know which apple server dictation connects to so that my proxy server will stop blocking it. Which apple server does it connect too?

I would like to know which apple server dictation connects to so that my proxy server will stop blocking it. Which apple server does it connect too?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

Data source migration in parallel to CRM server upgradation

Hi Experts,
We are working on BI 7.0 system which pulls data from CRM 2004. Recently we upgraded BI environment from BW3.5 (to BI.70 SP -16).
Now we are re-modeling the existing BI design due to performance issues & to use BI functionalities. We would like to migrate the data sources in BI also to BI version so that we can get advantage of using DTP & transformations.
But the issue here is now we started to up grade our source system also from CRM 2004 --> CRM 2007. I beleive that the data source version will be maintained in source system (CRM) tables also.
So if we migrate the data source now (before CRM upgrade), will it cause any issues in BI once CRM server upgrade done?
Note: We can implement all of our new designs with out data source migration.
Please advice us to proceed. Let me know if you need more details.
Thanks in advance.
Regards,
Arun Thangaraj.

Hi reddy,
1). Why Migration Process?
Migration process is to convert BW 3.x objects ( such as Data source, Trasfer rules and update rules etc) into BI 7.0 objests.
2). Why we are Migrating BW 3.X objects into 7.0 objects?
We are Migrating 3.x data source into 7.0 inorder to avail three functions, Those are
a). Direct data acquisition
b). Realtime Data Acquisition (RDA)
c). BI Accelarator.
3) .Regarding With export and Withour export options ?
These two options come in the process of Migration step. Regarding these options clearly described in the fourth point as bellow.
4). What will happen in this Migration process?
( Remember at the time Migration Transfer structure and Transfer rlues deleted, keep in mind go throgh bellow steps).
What ever may be the option selected (i.e, With Export or Without export ) data source will migrate to 7.0.
But if you choose With export option deleted Transfer Structure and Trasfer Rules will store in the table " RSDSEXPORT". If you select other option (i.e, Without export ) the deleted Trasfer structure and trasfer rules perminently not avaliable.
Thats why always go with With Export option only. This will help to revert back 7.0 data source into 3.5 data source when ever is there any requirement in future.
Please go look into bellow link.
Re: Migration of datasource from 3.5 to 7.0
if u r satisfed about my answer please assign points.
Thanks & Regards,
Kotesh.

Ios upgrade stopped my external hard drives and keep changing my laptop keyboards

Latest ios upgrade stopped my computers from contacting and saving in my external hard drives and keeps changing my laptop keyboards everytime I turn it on. Please Apple solve this because I know that many people suffer from this. If you do not I will stop my almost 30 year old use of Apples.

iOS has nothing to do with devices connected to your computer. It also has nothing to do with your keyboard. What have you done and when?
Barry

10.6.8 to Mavericks Server Upgrade loses Open Directory Users

Hi,
I have an OpenDirectory Master running OSX Server 10.6.8. An upgrade to Mavericks 10.9 has just failed.
The server has about 50 OD users and passwords need to be retained across the upgrade. Apart from OD, the only other active service is AFP file sharing.
DNS is good forward and back as per this article: OS X Server: Steps to take before upgrading or migrating the Open Directory database
I followed these Apple guidelines for server migration: OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server.
I cloned the boot drive, booted from the clone, upgraded to Mavericks, then installed the Mavericks Server app.
On opening the Mavericks Server app "Configuring services' showed for 5 minutes, but then an error message appeared. I did not record it exactly, but it was something like, "There was an error configuring the server. Certificate not valid!".
I was able to continue through the error but on opening Server app there were no OD (local/network) users showing. Authentication was not happening.
I had underestimated the time to get the installation done and I had used up the window of downtime I had booked - I did not have much time to troubleshoot. So, I cut back to the original hard drive and the server is back to 10.6.8 again.
Can anyone point me in the right direction to find out what may have gone wrong? How can I get my users into 10.9 Server?
Many thanks,
b.

Linc Davis advice is spot-on, as usual.
There seem to be dozens of sub-databases in the LDAP database. A problem in any of them seems to derail the entire conversion process. I tried a straight conversion and was also disappointed that there were unresolved issues, and it meant that the conversion failed.
So I did the export route using WorkGroup Manager, and exported four sets:
Users
Groups
Computers
Computer groups
go to the appropriate pane (e.g., Users) and Select All, then choose Export, and give it a name (probably with an embedded date in case you need to do it again later)
Then use 10.9 WorkGroup Manager (available as a separate download) to Import.
When re-imported, everything worked just fine (except the passwords, which cannot be carried forward using this method). I did have to manually enable at least one service, such as File Sharing service in Server [admin], or users showed up as "not allowed" [to log in].
This entire process of getting Server 3 to work is fraught with peril, and everything converges on ONE diagnostic, "Network users can't log in". Which means you blew it, but provides no additional information about WHERE you blew it.
There do not appear to be any magic bullets. It is just a tough slog. Users who reported success after failing the first time reported they returned to fundamental principles and did all the steps over, in order, to attain success.

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Mail Server suddenly stopped working

My mail server has stopped working, and I can't figure out why. This is a brand new MacMini with the latest Maverics Server (preinstalled) that I just setup last month. (We migrated from an Xserve running 10.6.) Up to this point, mail has worked flawlessly.
This afternoon I used the Server app to create a new user. I then went about setting them up for ssh access and installing a public/private keypair (this is for a git repository). Around the same time, my mail server simply stopped working. As far as I know, no other configuration changes were made.
When I go into the Mail service in the Server app the status perpetually says "Starting...". The 'postfix status' command says that postfix is not running. I've checked every log and error file, and I can only find three anomolies:
The SMTP log file reports:
Feb 11 01:31:06 mail.gloaming.com postfix/postmap[7152]: warning: /Library/Server/Mail/Data/scanner/amavis/local_domains.db: duplicate entry: "mail.gloaming.com"
This warning has been logged before, several weeks earlier, so I assume it's not a serious problem.
The other warning is:
Feb 11 00:10:49 mail.gloaming.com postfix/postfix-script[23141]: warning: not owned by _postfix: /Library/Server/Mail/Data/mta/./guid_device_maps.plist
Other threads seem to indicate that this warning is benign.
The only other problem that looks really suspicious (to me) is in the system.log:
Feb 11 01:22:52 mail.gloaming.com ocspd[4947]: ERROR: unable to get the receiver data from the DB!
I'm not sure what that means, but it doesn't sound good.
Some threads point a finger at the virus and junk mail scanners. If I disable all mail filtering, the mail server status will finally change to "Serving mail at mail.gloaming.com". But it isn't. All attempts to get mail from the server are refused.
(Oh, and I've restarted the server several times.)
The postconf command tells me that the postfix system isn't accepting outside connections:
inet_interfaces = loopback-only
So it would appear that Server is setting this. Any attempt to change it back to "= all" fails, as the server software overwrites it with "= loopback-only" at its first possible opportunity. (Editing the main.cf file and reloading postfix doesn't fix it either.)
Here's the really strange part. The server just started do this today. I recovered a backup of the main.cf file from yesterday and diffed it with the one that's not working:
mail:postfix root# diff /Library/Server/Mail/Config/postfix/main.cf /Users/admin/Desktop/main.cf
675c675
< inet_interfaces = loopback-only
> inet_interfaces = all
682c682
< smtpd_helo_restrictions = reject_non_fqdn_helo_hostname reject_invalid_helo_hostname
> smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
692c692
< mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com
> mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com, $mydomain
712d711
< postscreen_dnsbl_sites = zen.spamhaus.org*2
As you can see, the Server software has deliberatly started setting inet_interfaces to loopback-only and I can't figure out how to get it to set it back to "all".
Some of the other threads have suggested "wipe and reinstall", but I've spent three weeks setting up this sever and shipping it to a co-location facility—starting over really isn't an option.
I'd really just want to know why the Server software is suddently configuring the mail server so it won't receive any mail!

The mystery continues.
This morning, I decided to take a fresh look at what's going on by recovering a backup copy of my entire /Library/Server/Mail/Config directory from last month. Looking at the item capture list, it shows that none of the files in my Mail/Config directory have changed since late last month.
Here are the disturbing changes.
In Server/Mail/Config/dovecot/dovecot.conf, there is one different line.
working:
     protocols = imap pop3 lmtp sieve
now:
     protocols = lmtp sieve
So clearly, the server doesn't think we should be running IMAP or POP. Which is probably the root of the problem.
In Server/Mail/Config/postfix/mail.cf, there are a number of minor/cosmetic differences, but the problematic ones appear to be
working:
     inet_interfaces = all
     mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com, $mydomain
now:
     inet_interfaces = loopback-only
     mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com
Again, this configuration would imply that there are no public mail services.
Some other odd change occured in the Server/Mail/Config/postfix/main.cf file
working:
     smtpd     pass -       -       n       -       -       smtpd
     pickup    fifo n       -       n       60      1       pickup
          -o content_filter=smtp-amavis:[127.0.0.1]:10024
now:
     smtpd     pass -       -       n       -       -       smtpd
          -o receive_override_options=no_address_mappings
     pickup    fifo n       -       n       60      1       pickup
          -o content_filter=
Reading through some other posts, I also found another inexplicable change reported by other users having similar problems. The /System/Library/LaunchDaemons/org.postfix.master.plist suddenly changed.
working:
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
        <string>master</string>
        <string>-c</string>
        <string>/Library/Server/Mail/Config/postfix</string>
    </array>
now:
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
        <string>master</string>
        <string>-c</string>
        <string>/Library/Server/Mail/Config/postfix</string>
        <string>-e</string>
        <string>60</string>
    </array>
The postfix service is now "OnDemand" with a new, and myserious, "-e 60" option added. (I can find no documentation for an -e option in the postfix control tool.)
Ultimately, I "fixed" the problem by restoring the backup copy of my entire /Library/Server/Mail/Config folder, the /System/Library/LaunchDaemon/org.postfix.master.plist file, and immedately restarting the server. The mail servers started and everything appears to be normal.
But this whole experience has made me very learly of the Server app. Why did these configuration changes occur? What settings or circumstances caused them to spontaniously change to an, essentually, unusable state? I'm now afriad of making any changes via Server.app for fear it will decide I shouldn't have a working mail server again.
If anyone has any insights, I'd ver very interested in hearing them.
Message was edited by: James Bucanek

Afaria 7 SP5 enrollment server upgradation stops at 50%

Similar Messages

Maybe you are looking for