Afaria Trial Server Not reachable

Hi All,
I created a SAP Afaria Trial account, the account has instantiated a Server with a IP private address
which is not reachable, I have tested the IP (10.17.3.207) with following tools
Ping.eu
Tracert
It fails to reach the server
I did the following :
Went to the site http://www.sapmobilesecure.com/
Clicked on Free Trail
Registered my self
Got Two emails with login credentials
Logged into the server https://portal.sapafaria.com/login.php
Got the Server IP(10.17.3.207) address from Server Tab from the Administrator menu
Tried to access the wsdl as follows from desktop chrome browser
http://10.17.3.207:7980/AfariaService/Policy?wsdl
Which returns following error message in the chrome browser (I have installed fiddler in chrome)
[Fiddler] The connection to '10.17.3.207' failed.
Error: TimedOut (0x274c).
System.Net.Sockets.SocketException A connection attempt failed because the connected party did not properly
respond after a period of time, or established connection failed because connected host has failed to respond
The IP provided is private(as tested from ping.eu).
Can any one help in any pointer to resolve the issue.

Hello Prakash,
as SAP Afaria is a tool for mobile devices, you might have a faster answer if you post this question in the SAP for Mobile Discussions (as that Space is more relevant for mobile-related problems).
Regards,
Laszlo

Similar Messages

SPA 3102- STUN SERVER NOT REACHABLE

Hello,
Following are Line 1 settings of an SPA-3102
Nat mapping enabled=yes
Nat keep alive enabled=yes
Proxy server:correct proxy server specified
Outbound proxy server: Correct outbound proxy server specified
UserID and passwords are configured properly
SIP TAB:
RTP port min=16384
RTP port max=16390
Handle via received=yes
Insert via received=yes
Substitute via addr=yes
STUN enable=yes
STUN Server=aa.aa.com (correct STUN server configured)
Hadle via rport=yes
Inser via rport=yes
Send resp to SRC port=yes
STUN test enable=yes
TURN server=not configured
STUN test enable=yes
EXT IP=not configured
NAT keep alive INTVL=15
Problem:
On the REGISTER message I am receiving following warning
Warning: 399 spa "STUN Server Not Reachable"
User-Agent: Linksys/SPA3102-5.1.7(GW)
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Would you please explain why I receive STUN not reachable warning? It is a reachable STUN server. SPA 3102 devices are placed behind ADSL modems of ITSP

I just noticed that you have Handle VIA received = yes, so if the proxy is responding with a 'received' tag, then the SPA would learn its external IP, without needing to contact the STUN server. I have a system that is behind NAT but does not need STUN or symmetric RTP, because it uses the IP from the received tag in the SDP. (In my case, I have the RTP ports forwarded to the SPA, so no port number translations are needed.)

Air video server not reachable?

I cannot figure out why the air video server is not reachable.

Also, see here:
http://www.inmethod.com/air-video/troubleshooting.html

IDES 4.7, MMC - disp+work running but message server not reachable

Hi,
I loaded IDES 4.7 in Windows 2003 server with Oracle 9i. While starting MMC, the disp+work running but message server not reached causing the issue.
Please suggest,
Thanks,
Prasad

Hi,
Please find the logs from the file Dev_disp
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Jul 13 14:14:52 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1545]
Fri Jul 13 14:14:54 2007
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Jul 13 14:15:31 2007
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   4130]
Fri Jul 13 14:15:33 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:15:36 2007
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
Fri Jul 13 14:15:38 2007
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
Fri Jul 13 14:15:42 2007
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   4130]
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   4130]
Fri Jul 13 14:15:43 2007
ERROR => MsISnd2: not_attached [msxxi.c      1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   4049]
Fri Jul 13 14:15:53 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:16:13 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:16:33 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:16:54 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:17:14 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:17:35 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:17:56 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]
Fri Jul 13 14:18:16 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c      633]

My solution for AEBS locking up (NTP server not reachable)

I'll prefix this by saying that the issue that I found is pretty rare, but easy to fix.
I had a problem with my Airport Express that would cause all sorts of weird problems. After a couple days, either it wouldn't print, not allow clients to associate, not accept the correct password in the Airport Admin Utility, or not show up in the Airport Admin utility.
It turns out that I had enabled using a NTP server, but the NTP server wasn't reachable. In my network setup, the airports are in part of the subnet that's firewalled from the internet. The fix was for me to change the NTP server to an internal machine, but turning off NTP would have worked just the same.
NTP seems to only be used for logging, so turning it off shouldn't affect network performance.
I haven't had to reset either base stations since.

Here you go!
Use the terminal and be a root user and follow the steps bellow:
cd /etc
more ntp.conf
Then include this two lines:
server 127.127.1.1 prefer
fudge 127.127.1.1 stratum 3 refid NIST
After that save and exit. Then checked your ntp using the server admin tool and thats done. Be warn don't mend anything with the system preferences date and time.

For server the Node Manager associated with machine is not reachable

Hello all,
I am getting this error, when i start my Managed Server which is in shutdown state
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The configuration details are
i am using weblogic 9.2 MP3 version in windows 2k3 server.
It has a machine vm-bea-dev, a cluster cluster-saa-dev, to which both the managed servers saa-dev-1 and saa-dev-2 are assigned. There are 3 applications deployed onto managed Server 1 and 1 for managed Server 2.
Managed Server 1 is in shutdown state, and when i start the server, it gives the error specified below
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The same for Managed Server 2 too, and this server is in Admin State, i dont know how it went into that state.
Can somebody please help me reslove it.
Thanks in advance

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

Weblogic Server is not reachable

Hi Guys,
we use a Weblogic Server 4.5.1 SP8 on Solaris 2.7 und JDK 1.2.1_04 and the
performance pack.
In addition we use a Netscape Enterprise Server as a proxy with the nsapi
bridge. Sometime the Weblogic Server is not reachable over the T3 protocol.
In the access log of the NES we get timeout errors for Weblogic Server. We
used the weblogic.Admin class to ping the server at every minute. So we
could realize that the server was not reachable for about 5 minutes. After
that time the server worked normally. But during this time the server seemed
to be dead. There was no logging at all. Does anyone has an idea?
Thanks in advance
Lutz Strobel

Thanks a lot. It is restarted. Could you please elaborate the solution... this was related to some security right?

Master/Slave Server is not reachable

We have standalone server install, but then I go to System->object finder and try to search something: i got the following error:
"Master/Slave Server is not reachable"

This typically indicates a problem with the System Identity User. Go to Common Services > Server > Security > System Identity Setup. Re-enter the username and password, and make sure the username points to an account with full access to all LMS applications and tasks.

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

CUE Website not reachable

Hello,
we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2).
The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful.
I also can connect to CUE through CLI of the UC560.
BUT : The Webinterface of the CUE does not answer. The webiste ist not reachable.
Here the http config of the UC560 :
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/GUI
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services
http://10.1.10.1/voiceview/common/login.do
url authentication
http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
and the telephony part :
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
Can the problem be based on corrupt http CUE files or the wrong version ? Which files are required ?
May the Firewall ACLs block this traffic ? But ping works !
Please help !
Greets
Huck

That usually happens when your PC is using a default gatway that doesn't know about CUE address subnet.
So you have to fix your routing.

Ora 12543 tns destination host not reachable

Dear All,
OS: RHEL 5
DB VERSION:-11.2.0
I am facing problem related to ora 12543 tns destination host not reachable
The problem here is little bit different what exactly other face:-
i have 2 servers with name abc.localdomain & xyz.localdomain.
Db name on abc.localdomain is abc
Db name on xyz.localdomain is xyz
When i try to ping with below mentioned command abc and xyz from abc.localdomain i am successful
ping abc
ping xyz
But when the same thing i am trying to do from xyz.localdomain i am able to ping the db running on xyz.localdomain. but getting the above mentioned error duringg pinging of abc database located on abc.localdomain server
I am able to ping both the server's from their ip's and hostname but not by abc db name and also checked firewall on both servers are disabled.
Here are my tnsnames.ora and listener.ora files for both machines
xyz.localdomain tnsnames.ora file:-
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
xyz =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
    (CONNECT_DATA =
      (SERVICE_NAME = xyz)
abc =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = abc)
xyz.localdomain listener.ora:-
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
SID_LIST_LISTENER1 =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = xyz)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
      (SID_NAME = xyz)
ADR_BASE_LISTENER1 = /u01/app/oracle
abc.localdomain machine:-
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = abc)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/grid)
      (SID_NAME = abc)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
tnsnames.ora:-
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
xyz =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
    (CONNECT_DATA =
      (SERVICE_NAME = xyz)
abc =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = abc)
So kindly advice over the same if anyone of you face the same problem.

Hi,
Before actually looking up on this issue. I would suggest you to read the below posts to get true knowledge of what these utility do (i.e Listener, tnsping) and what are there purpose.
Help! I can't connect to my database...; | Ed Stevens, DBA
Help! I can't connect to my database (part duex) | Ed Stevens, DBA
tnsping what it is, what it isn't | Ed Stevens, DBA

Uc560 - CUE Webinterface not reachable

Hello,
i have a problem with my UC560. Especially with the CUE Webinterface. After config my UC560 everthings working fine.
But the webinterface of the CUE is not reachable. I can ping the integtr. Service. Engine with IP 10.1.10.1. from my network.
A service-module integr.S.E. status reports -> everything OK. A seesion on CLI also connects and works.
Is there any idea ? help !!!
here some configs :
interface Integrated-Service-Engine0/0
description Interface used to manage integrated application modulecue is initialized with default IMAP group
ip unnumbered Vlan90
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface GigabitEthernet0/1/3
description Interface used to communicate with integrated service module
switchport access vlan 90
no ip address
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface Vlan90
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Vlan90

Hello,
I have a similar issue. I know that there are many threads like this but this is the newest I found
I've wiped the preloaded configuration and now using the uc560 like a standard ISR. I've made a lot of tests and changes, using G0/0 and an IP for connecting to the LAN, or g0/1/0 as trunk/access port connecting to the LAN. I've ended up with the configuration I'm attaching. There is no way to have connectivity with the CUE. I've tried with and without VLANs (the file attached is with VLANs). NAT is irrelevant in my case since there is not anything to translate it's all a private routed network. I still cannot ping the ISE inf from inside the uc560 localy or the gateway address from inside the CUE.
This G0/1/3 seems to need some special configuration to be done in order to work. Do you know what is it?
It's also not possible to make the CUE to factory default. No initial setup wizard starts... nothing. No wizard needed for the initial setup like all the other CUE products?
Here is the config:
! interface GigabitEthernet0/0 no ip address duplex auto speed auto h323-gateway voip interface!interface Integrated-Service-Engine0/0 description Loopback interface used to manage integrated application module ip unnumbered Vlan2 service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface GigabitEthernet0/1/0 switchport access vlan 2 no ip address!interface GigabitEthernet0/1/1 no ip address!interface GigabitEthernet0/1/2 no ip address!interface GigabitEthernet0/1/3 description Interface used to communicate with integrated service modue switchport access vlan 2 no ip address service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface BRI0/1/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 5!interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 6!interface BRI0/2/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup! interface BRI0/2/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup!interface Vlan1 no ip address!interface Vlan2 ip address 192.168.2.2 255.255.255.0!ip forward-protocol ndip http serverno ip http secure-serverip http path flash:/gui!ip route 0.0.0.0 0.0.0.0 192.168.2.1ip route 192.168.2.254 255.255.255.255 Integrated-Service-Engine0/0!!!telephony-service no auto-reg-ephone max-ephones 15 max-dn 15 ip source-address 192.168.2.2 port 2000 secondary 192.168.2.3 rehome 15 time-zone 28 time-format 24 max-conferences 4 gain -6 moh flash:/media/music-on-hold.au multicast moh 239.0.0.1 port 16384 route 192.168.2.2 web admin system name admin password cisco time-webedit transfer-system full-consult create cnf-files version-stamp 7960 Mar 06 2013 15:02:09!
Thanks in advance!

Some sites are not reachable in FF however they were before.(In other browser they work). Why?

Some sites are not reachable in FF however they were before.(In other browser they work). Why
It is like some sites are blocked but FF says :
"The connection was reset
The connection to server was reset while the page download..."
== URL of affected sites ==
http://www.profession.hu http://www.hirkereso.hu

See "Error_loading_some_websites": http://kb.mozillazine.org/Error_loading_websites

NODE-NOT-REACHABLE on ISE

Primary ISE node (Serving Admin and Monitor personas) is showing two of the PSNs as "NODE-NOT-REACHABLE" under Replication Status on Deployment page on GUI. It can ping the PSNs and PSNs are actually registered to the Primary admin/monitor node. How can I fix this?
Thanks,
Kashish

Hi,
I found the issue on ny network and it was due to a different dns record.
Simple way to check is issuing a dns lookup from admin node cli of the problem node. Then repeat from problem node attempting to resolve admin node.
Then if that looks good you can issue the command on both nodes...
Show logging application ise tail,
That output should give you a listing of the nodes in the ise deployment and the ip addresses of each node.
Thanks.
Sent from Cisco Technical Support Android App

Afaria Trial Server Not reachable

Similar Messages

Maybe you are looking for