Affect not rendered with AVCHD

I've had CS4 for a few days now. Running into problems. I have 1 clip in the timeline (AVCHD, MTS file). I added one effect (Auto Levels). When rendered using AME to H.264 the effect did not render with it. It will sort of flash once every 10 frames with the Auto Levels effect. I tried the same procedure with a SD avi file and it rendered Auto Levels fine. I am completely updated.

I can't tell you why it's not working, but I can tell you that it doesn't really matter as you're better off avoiding the use of any type of 'auto' effects anyway. Do what you need manually and it should work.

Similar Messages

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Kdenlive not rendering with title clip

After doing a system upgrade kdelive will no longer render my project, which rendered fine before the upgrade. After I click render, it either gets stuck in "waiting" or it gives an error saying that rendering crashed. If I turn off the title clip, rendering proceeds as normal. Looking around I saw some people with similar problems fixing it by running kdenlive as root, but in my case that didn't solve anything. Anyone have any ideas?
The kdenlive profile I'm using is HD 1080p 59.94fps and I'm trying to render an H.264 video (although trying other formats encounters the same problem).
Some relevant package info:
[root@labby ~]# pacman -Qs kdenlive
local/kdenlive 0.9.6-2
A non-linear video editor for Linux
[root@labby ~]#
[root@labby ~]# pacman -Qs ffmpeg
local/ffmpeg 1:2.1.1-1
Complete and free Internet live audio and video broadcasting solution
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
[root@labby ~]#
[root@labby ~]# pacman -Qs mlt
local/mlt 0.9.0-5
An open source multimedia framework

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

Model not rendering with no UI in Applet

I am currently working on an implementation of AutoVue that calls for the applet to have no UI and to just display the model.
I have found that when I remove the UI form the applet the model does not render or display until I do something to the page like scroll the browser window or re size the browser window.
I have found that if I leave 'TOOLBAR NORTH IDS_VIEWMODE_MAIN' in the UI with at least one of the 'BUTTONPOPUP 3DMODE' options e.g. SMActionRotate then the model renders properly on page load without having to do any of the quirky things mentioned above. Has anybody else had this issue or know of any work arounds?

Not able to reproduce by removing north toolbar (using a custom gui file).
Even removing all the UI works fine, e.g.:
BEGIN UI SMVIEW
END
Which JDK are you using?
Try to use light weight component using the following applet parameter:
+<PARAM NAME="HEAVYWEIGHT" VALUE="false">+
See related link: http://www.oracle.com/technetwork/articles/java/mixing-components-433992.html
Edited by: AutoVue AU on Feb 15, 2013 7:19 AM

Shake not rendering with Snow Leopard?

I had Tiger and Shake operated flawlessly. I recently upgraded to Snow Leopard, because I use Maya 2010, and it will not run on Tiger. After I upgraded to Snow Leopard, Shake does not render. The rendered files cannot be opened in any program! (Photoshop, After Effects, Preview, etc.) I know that Apple announced that they would no longer give updates on Shake since they are no longer making it, so I am wondering if it is a OS compatibility issue from Shake 4.1 to Snow Leopard? I also use Final Cut Pro, and have not seen any issues with rendering from that, so I am confused! Anybody that has any insight would be in my debt forever! Please Help!

masterslacker wrote:
my version still tells me v4.10.0606
Yes, that's what 4.1.1 displays in the Shake window.
If you look at the Shake application icon in Finder, you should see the accurate version number:
http://support.apple.com/kb/TS2423
The link I mentioned earlier includes a detailed discussion of updating Shake in Snow Leopard:
stuckfootage wrote:
Check out this thread:
http://discussions.apple.com/thread.jspa?threadID=2263581&tstart=0

AE CS5 - Duplicated comp not rendering with custom camera

Hello
I hope this is a simple fix.
I have an AE comp that uses a custom camera and many 3D layers.
I duplicated the comp, and the new comp will not render using the custom camera. It uses a default camera which does not have my camrea's attributes, and it looks all wonky.
Is there a place where I can force the render to use a specific camera? I didn't see an option in the render settings or output module.
Thanks
----------S

In that screenshot, the text is too tiny for me to make anything out.
I can tell that you're previewing in the Composition panel with your shotCam. But is that camera layer the active camera in the composition?
In case you're not clear on what the active camera is, here's an excerpt from After Effects Help:
"You can choose to view a composition through the active camera or through a named custom camera. The active camera is the topmost camera in the Timeline panel at the current time for which the Video switch is selected. The active camera view is the point of view used for creating final output and nesting compositions."

ThemeBasedFoi Not rendering with advanced style

Hello,
I have defined an advanced variable ranged bucket as:
<?xml version="1.0" ?>
<AdvancedStyle>
 <BucketStyle>
 <Buckets>
 <RangedBucket seq="0" label="Muito Pouco" low="0.0" high="19915.0" style="C.RED5" label_style="T.RIO"/>
 <RangedBucket seq="1" label="Pouco" low="19915.0" high="218128.12" style="C.RED4" label_style="T.RIO"/>
 <RangedBucket seq="2" label="Normal" low="218128.12" high="1992239.79" style="C.RED3" label_style="T.RIO"/>
 <RangedBucket seq="3" label="Muito" low="1992239.79" high="1.91553676E7" style="C.RED2" label_style="T.RIO"/>
 <RangedBucket seq="4" label="Elevado" low="1.91553676E7" high="1.1386E14" style="C.RED1" label_style="T.RIO"/>
 </Buckets>
 </BucketStyle>
</AdvancedStyle>And the following theme, that makes use of the above style.
<?xml version="1.0" standalone="yes"?>
<styling_rules>
 <rule column="agg">
 <features style="V.VR_RED5">SELECT pk_instalacao, agg, geom
 FROM TABLE_I_GF_SQE </features>
</rule>
</styling_rules>When i render it in Oracle Maps all geometric elements are displayed in white color, not the color i specified in the advanced style.
Any thoughts ...

Hi J. Sharma, thank you for your response, sorry for my delay.
This was just a test to see if i could specify, queries in the theme definition.
I'm building a Spatial OLAP Server, and i need to define the themes dynamically, based on the spatial attributes, semantic attributes, and aggregated measures specified by the Spatial OLAP client.
At the time i wrote my first post, i was realizing that mapviewer does not handle well the SDO_AGGR_UNION, so i decided to create a table with the result of a more complex query and render it with an advanced style.
But the style failed, nevertheless i found a solution for the problem, as soon as i have some time i will post my results in the forum.

WebDynpro Mobile - Table not rendered with PIE Client

Hello experts,
I want to create a WebDynpro Mobile application.
In this application I have a table which is bound to three Context Attributes with the type String.
In a standard browser, that table is displayed correctly. But when I am using the PIE Client, I just get a strange table-like "thing" with one column and row, without a header title and a radiobutton in the one table cell.
Does anybody have an idea what is going wrong here?
Thanks in advance
Felix

Refer this thread also. Similar question was earlier raised by me also..
Mobile WebDynpro Sample App Problem
Solution is at the last message of this thread.
Regards,
Gopal

Audio not rendered - but when I tell FCE to render it, nothing happens

When I pull in some DV files, FCE shows my audio as not rendered, with that red line. So I tell it to render it, and nothing happens. I get a very brief flash of the rendering progress bar, the red line disappears, but the audio remains unrendered because when you play it you get silence (I have turned off the annoying "beeping").
Even if I save the project, or quit and restart, or tell FCE to render everything, my audio remains stubbornly unrendered.
Any suggestions?

Hey, I had the same thing happen to me. I'm not sure if this is the best answer, but in order to get it to render, i had to select the audio in the timeline and in the menu, i select Render Only --> Needs Render. That worked for me. Hopefully that will solve your problem too. Good luck!

The new upgrade to Firefox 4.0 has rendered the browser useless. Error message is XUL Runner Platform Version 2.0.1 not compatible with minVersion =2.0 maxVersion =2.0. How do I get any version of Firefox to load again?

XUL Runner Platform Version 2.0.1 not compatible with minVersion>=2.0 maxVersion<=2.0

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

PanelGrid with binding attribute not rendering when event on page fires

I am having a similar issue with my components not being rendered from a dynamic binding attribute as described by this post:http://forum.java.sun.com/thread.jspa?threadID=671672 but for different reason. I have combed the forum and other sources for a week now, tried numerous variations of this based on suggestions I've read for rendering dynamic components and am unable to find the problem. I would appreciate guidance as I don't know what else to do and I imagine there is something basic about the JSF flow layout or component classes I am not doing correctly.
From a high level, I have a page with two panel groups. The first contains a list of command links (like a menu) that have an actionlistener that populates a list of QueryVariable objects called filterCriteria in the backing bean based on the selection made and then calls a function to update components in the second panel. The second panelGroup contains a panelGrid with a binding attribute that constructs a dynamic set of input fields based on the content of the filterCriteria list. When I first naviagate to this page from another page, the fields are rendered properly. However, if I then select a commandLink from the menu, the panelGrid disappears and is not rendered.
I've stepped through the code in a debugger and my actionlistener is called when I select a command link. However, the binding attribute method is not called at this time, so I added a direct call to it from the action listener. I know the actionlistener is working because I've verified it in the debugger and if I navigate away and come back to the page, then the binding method is called and the new selection is reflected in a rendered panelGrid. Why is it not rendering though when I first select the commandLink and the page is updated. Also, fyi, there is an action method for the commandlinks but it returns null;
FWIW, I'm using MyFaces and Facelets in my application.
Below is my code. This is inside a managed session bean:
JSF Snippet:
<h:panelGrid id="inputVarsTable" columns="3" binding="#{query.table}"/>
 public HtmlPanelGrid getTable() {
 if(table == null)
 table = new HtmlPanelGrid();
 return constructSearchInputTable();
 public void setTable(HtmlPanelGrid table) {
 this.table = table;
// Updates table component to reflect filterCriteria
 public HtmlPanelGrid constructSearchInputTable()
 HtmlOutputLabel outLabel;
 HtmlOutputText outText;
 HtmlInputText inText;
 HtmlMessage message;
 List<UIComponent> children;
 ValueBinding vb;
 FacesContext facesContext = FacesContext.getCurrentInstance();
 UIViewRoot uIViewRoot = facesContext.getViewRoot();
 Application application = facesContext.getApplication();
 children = table.getChildren();
 children.clear();
 try {
 for (int i = 0; i < getFilterCriteria().size(); i++) {
 QueryVariable var = getFilterCriteria().get(i);
 String id = "var" + i;
 //<h:outputLabel for="#{var.name}" styleClass="label">
 outLabel = new HtmlOutputLabel();
 outLabel.setFor(id);
 outLabel.setStyleClass("label");
 // <h:outputText value="#{var.name}" />
 outText = new HtmlOutputText();
 outText.setValue(var.getName());
 outText.setParent(outLabel);
 outLabel.getChildren().add(outText);
 outLabel.setParent(table);
 children.add(outLabel);
 //<h:inputText id="#{var.name}" value="#{var.value}" required="true" />
 inText = new HtmlInputText();
 inText.setId(id);
 String bind = "#{query.filterValues['" + var.getName() + "']}";
 inText.setValueBinding("value", application.createValueBinding(bind));
 if(var.getDefaultValue() == null)
 inText.setRequired(true);
 inText.setParent(table);
 children.add(inText);
 //<h:message for="#{var.name}" styleClass="errorText"/>
 message = new HtmlMessage();
 message.setFor(id);
 message.setStyleClass("errorText");
 message.setParent(table);
 children.add(message);
 } catch (Exception e) {
 log.error(e);
 return table;
// Command Link Menu ActionListener
 public void structuredQuerySelection(ActionEvent e) {
 queryType = QueryType.StructuredQuery;
 UICommand cmd = (UICommand) e.getSource();
 filterSelection = (String) cmd.getValue();
 Map<String, SearchRequestCtx> queries = pdp.getGenericMetadata().savedQueries;
 SearchRequestCtx ctx = queries.get(filterSelection);
 filterCriteria = new ArrayList<QueryVariable>();
 filterCriteria.addAll(ctx.getVariables());
 constructSearchInputTable();
 // Command Link Menu Action
 public String selectStructuredQuery()
 return null;
 }BTW, this is my first post and I don't really know how that Duke Dollar thing works but I'm happy to offer some to anyone that can solve this issue for me.
Thanks,
Ken

Glad to hear I am not the only one struggling with this type of issue.
I tried your suggestion but it caused a NoSuchElementException when the page tried to render. Stepping through the code, the init function is always called after my panelGrid is constructed. I even commented out the logic to clear the children and confirmed that in the constructed page, the outputText component that binds to init is the first element on the page - right after the opening body tag. Maybe, JSF doesn't necessarily construct the page in top to bottom order? Also, the exception makes me think that this gets called too late in the lifecycle to work. Were you able to get this to work?
java.util.NoSuchElementException
 at java.util.AbstractList$Itr.next(AbstractList.java:427)
 at com.sun.facelets.FaceletViewHandler.encodeRecursive(FaceletViewHandler.java:515)
 at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:445)
 at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:300)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:110)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
 at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:482)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
 at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
 at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
 at java.lang.Thread.run(Thread.java:595)Ken

Server Side Includes not rendering correctly in Firefox with Layers

Hi
The server side includes are not correctly rendering with layers in firefox. From my site here:-
http://www.osteriastecca.com/index.php
the home_page.php content renders above a layer on the index.php page. Initially I thought this might be a Flash layer issue but the wmode is set correctly to transparent and it works fine with a normal ssi. It also works fine in Firefox without a server side include as you can see here:-
http://www.osteriastecca.com/index_old.php
Works fine in IE and Safari, but not Firefox.
How can this be rectified?
Regards
Glennyboy

What testing server setup do you have? Are you using something like WAMP?
What do you see on screen which tells you the SSIs are not rendering? Any error message?

Adf application not rendered correctly with url ip and url localhost.

Hi all.
I have a strange problem. When I enter to my adf application deployed in a local stand alone weblogic server with the ip:
http://localhost:7001/Application/faces/index
it renders fine. But when I load it with the url:
http://10.5.14.15:7001/Application/faces/index (private ip), it doesn´t render fine. Tables haven´t the same style, and some elements appear selected like if I have selected them with the mouse.
This problem only happens with internet explorer, not with Chrome.
Also when I see a table inside a region in a jspx, the with of the header of the columns is not rendered correctly, causing the width of the header row not be the same than the other rows.
This problem also happens only with internet explorer.
Any help please?
Internet Explorer 8. JDeveloper 11g.2. Weblogic 10.3.5.0
Also happens with Internet Explorer.
Maybe encoding? doctype?
Thanks

What would the DOCTYPE have to do with the IP address?
Have you looked at the HTML source in the different browsers and tried to debug what's wrong? Sounds like there may be some images/css files that aren't being downloaded in IE when you use that IP address. Are you sure IE isn't configured with a proxy?
John

"Could not create renderer with alias..." after deploying ResourceRenderer

Hello everybody
I've developed a custom ResourceRenderer class that looks like this:
package no.expert.portal.km.relateddocs;
import com.sapportals.htmlb.Component;
import com.sapportals.htmlb.Link;
import com.sapportals.wcm.WcmException;
import com.sapportals.wcm.rendering.resource.cm.ResourceRenderer;
import com.sapportals.wcm.repository.IResource;
public class RelatedDocsNamePropertyRenderer extends ResourceRenderer
 protected Component renderContentLink(com.sapportals.htmlb.Component comp) throws WcmException
 Link result = (Link) super.renderContentLink(comp);
 result.setTarget("");
 return result;
 protected Component renderContentLink(IResource resource, com.sapportals.htmlb.Component comp) throws WcmException
 Link result = (Link)super.renderContentLink(resource, comp);
 result.setTarget("");
 return result;
All it does, really, is preventing links to documents in KM to open in a new window. At least that's what I'm hoping it will do, as it's based on ideas in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=20316">this post</a>.
I've added all the necessary .jar files, and implemented a wrapper portal service as described here: <a href="http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html">http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html</a>.
I've created an alias for the class in Content Management -> User Interface -> Mapping, and assigned this to the resource renderer settings that I use.
OK, here is where the trouble starts. When viewing the layout set with debugging on, I check Rendering Information. It informs me that "The given configuration was not used, because the alias is not defined or points to an invalid java class". Looking in the log, this is the error message:
Could not create renderer with alias ZRelatedDocsNameResourceRender and classname no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer:java.lang.NoClassDefFoundError: com/sapportals/wcm/rendering/resource/cm/ResourceRenderer
------------------------- Loader Info -------------------------
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@6b247b]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@4e82c4]
References:
 not registered!
Resources:
 C:usrsapEPUJC00j2eeclusterserver0appssap.comirjservlet_jspirjrootWEB-INFportalportalappsno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRendererprivatelibno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderercore.jar
The error occurred while trying to load "no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer".
 at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
I have a suspicion this might have something to do with the SharingRefernce in portalapp.xml, but after experimenting with different values, I'm no nearer a solution. Any ideas, anyone? Any help greatly appreciated.
-martin
Yes, and here is my portalapp.xml:
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
 <property name="SharingReference" value="com.sap.netweaver.bc.crt,knowledgemanagement"/>
 <property name="PrivateSharingReference" value="com.sap.km.cm.ui.flex"/>
</application-config>
<components>
 <component name="RelatedDocsNamePropertyRenderer">
 <component-config>
 <property name="ClassName" value="no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer"/>
 </component-config>
 <component-profile/>
 </component>
</components>
<services>
 <service name="BootStrapNamePropertyRender">
 <service-config>
 <property name="className" value="no.expert.portal.km.relateddocs.BootStrapNamePropertyRender"/>
 <property name="startup" value="true"/>
 </service-config>
 </service>
</services>
</application>

Hi Gourab,
Double check the the page.xml has referring to the correct CO. Open the page.xml and see which controller is attached to it.
Also attach the extended controller through personalization to the page/Region.
Thanks
--Anil

Affect not rendered with AVCHD

Similar Messages

Maybe you are looking for