AFP (Advanced Function Presentation) Viewer needed for 10.4.11 or earlier

My company uses ".afp" to send documents to employees. I cannot find a viewer for Mac OS that can view these AFP files. The largest problem is that I try to look for "AFP" along with Mac and all I get is Apple Filing Protocol.
There are quite a few programs for Windoze that will translate AFP to PDF but unfortunately, that doesn't help us Mac users.

Baltwo,
Thanks. I'm not hopeful that what you suggest will work in this case. Initially, my system was working fine with 10.4.11. I cloned with CCC and then Installed 10.5 over the existing drive. The install appeared to go well, but on restart, the keyboard was not accepted. I installed all upgrades and repaired permissions using the 10.5 install disk. The keyboard still didn't work.
I took the computer to the Apple Genius bar and they were about to do an Archive and Install when they noted that my hard drive was "failing". So they went out and replaced the hard drive and installed 10.5.8. It appeared to work fine. I then used Migration Assistant from the clone to the new operating system. I now have the same problem with the keyboard not working on the 10.5.8 hard drive, but working fine when I boot up on the 10.4.11 clone.
My guess is that there is some 3rd party file or files that are compatible with 10.4.11 but not compatible with 10.5.8.
If, after repairing with DiskWarrior and Tech Tool Pro, I still have the problem, I'll try what you suggest, but I am not hopeful that it will work. When I clone back tot he 10.5 hard drive, it will bring any problem files with it.
The next step would be a clean install and then a drag and drop from the clone with a re-install on things that require it. That will be a major undertaking,but I am afraid that I may need to do it.
Do you have any suggestions for how to find what files might be incompatible with 10.5.8? Is there some way to migrate files in small groups? What if I used Time machine, so that I could easily go back if a Migration step was a problem?
Thanks again. Your suggestion is a good one and I'll try it, but I already have some indication that it won't work this time.
Best Regards,
Dave

Similar Messages

Sql like function in View Object for progammatically

Hi friends,
I used Jdeveloper 11.1.1.4.0 ,I need how to get the datas from database using sql like function(select * from tablename where name like 'p%') using viewCriteria by
programmatically.
Thanks & Regards,
Priya.
Edited by: priya on Apr 8, 2011 3:48 AM
Edited by: priya on Apr 8, 2011 3:49 AM

Check the docs: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcadvvo.htm#sm0341
Timo

Powerpoint problem in presenter view.

I'm having a powerpoint problem in presenter view. For some reason it's only showing the slide I'm on, as opposed to showing the next slide as well. Anyone else ever run into this?

I'm having a powerpoint problem in presenter view. For some reason it's only showing the slide I'm on, as opposed to showing the next slide as well. Anyone else ever run into this?

Non-Present Hidden Devices are Shown Automatically. No Need for DEVMGR_SHOW_NONPRESENT_DEVICES Anymore

Hello,
I noticed that non-present devices that were previously used on the computer to which Device Manager snap-in is connected to are currently shown automatically should you choose
Shown hidden devices item in the View menu without you have to set the DEVMGR_SHOW_NONPRESENT_DEVICES environment variable system-wide and initialize in to 1 (one) as it was previously suggested in the well-known
Device Manager does not display devices that are not connected to the Windows XP-based computer
KB 315539 article.
Is it correct?
Well this is the world we live in And these are the hands we're given...

Hello,
Yes that is correct, you should not need the environment variable any longer
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. VAMT - Volume Activation Management Tool - Download link http://www.microsoft.com/downloads/details.aspx?FamilyID=ec7156d2-2864-49ee-bfcb-777b898ad582&displaylang=en
That is absolutely incorrect.
Show Hidden Devices=devices that are part of a setup class that is marked as a NoDisplayClass in the registry.
DEVMGR_SHOW_NONPRESENT_DEVICES=1 means devices that were physically removed from the computer but whose registry entries were not deleted. Get the difference?
"Show hidden devices" option is there since Windows 2000 and has nothing to do with the DEVMGR_SHOW_NONPRESENT_DEVICES environment variable. Just because MS screwed up and deleting this functionality, they conclude, "There is no need for it any more" and
continue justifying their abuse of feature deletion in their software. There was a need to see "Non Plug and Play Devices" when any software driver (AV filter driver or any other software driver) installed on the system got corrupt or needed to be
uninstalled manually or when its uninstaller didn't remove it properly.
I am shocked anyone from Microsoft can behave this way. "There is no need". Hey, speak for yourself!!!!! Don't speak for your users when you've just deleted functionality.

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

Sounds to me more like you have the Display Performance set on Typical rather than High Quality Display. Unless there is a problem with a missing or out-of-date link, the display in ID has nothing to do with output quality -- all of the image data is used for output.

Can synced photos on my iPad be sent back to my Mac? I lost pics in my iPhoto file needed for a presentation.

Can synced photos on my iPad be sent back to my Mac? I lost pics in my iPhoto file needed for a presentation.

And of course I forgot about the built in way to send them back to the Mac .... Email them. You can email up to 5 photos at at time.
Launch the photos app, while looking at the photos in thumbnail view - tap the arrow icon in the upper right corner - tap on up to 5 photos at a time - Tap the Share button in the upper left corner - tap email from the resulting window.

I need a spreadsheet that allow any advanced functionality such as macros and active x components. Any possibility of that ever happenning?

I have spreadsheets that contain macros. Unless and until software producers change the programming or capability that allow any advanced functionality such as macros and active x components, I cannot use my ipad. So I am forced to lug my laptop and my ipad around when the ipad would be perfect for my work in insurance. The fact that this capability does not exsist in docs to go or numbers means there either is a major hang up or these software manufacturers don't feel the need is strong enough. Either way, it really puts people like me in a bind. Does anyone have a solution for this? Is it really that hard of a thing to do to be able to read and run macros?

Unfortunately there is NONE. I have tried searching for a long time but never succeeded to find an app that can read Macros. I hope there must be a very strong limitation for developers to support macros.

Transformation: Need for calling a custom function module on source system

Hi Gurus,
I need to use a custom FM residing on source system within the transformation to determine the type (e.g. posting type) of a document item. The logic is quite complex with many exceptions (many if statements) and 2 customizing & few transparent tables are in use as well in the FM.
From my point of view, there are few options for achieving the outcome:
1. Copy the FM logic 1:1 in transformation
2. Transport the FM from ERP to BW system
3. Source system delivers the info (e.g. with an extra field "posting_type")
4. Access the FM directly via RFC/BAPI
However, there are pros and cons for each of the alternatives:
*Option 1*
pros:
cons: consistency problem, need for importing customizing tables & source tables, high maintenance effort
*Option 2*
pros: better consistency compared to Option 1
cons: need for importing tables, administrative efforts
*Option 3*
pros: no logic is needed at BW side, no transformations means no impact on performance, high consistency, no administrative effort
cons: structure in source system has to be changed, impact on historical records
*Option 4*
pros: best consistency (better than Option 3 as FM might change), no administrative effort
cons: impact on performance during transformation
Could you please verify my assumptions and give suggestions on solving the problem?
Thanks a lot!
Regards,
Meng

Hi Joon,
According to me.
If Historical data amount is so high, historical data is available in BW(at PSA level or acquisition layer or corporate memory layer) and headache to load history data(because of overload on ECC due to huge amount of data) from ECC then I will suggest combination of 3 and 4 steps.
If fetching history data from ECC is not headache for you then go for step 3.
Step 3 is most common approach in BW, which is easy for implementation and support.
Regards,
Ashish

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

As PowerPoint it a Microsoft product, you may find that you get better answers to your question on their PowerPoint forums.
Best of luck.

"Presenter view" for Acrobat - URGENT!

Hi all,
Is it possible to have a feature like "presenter view" (as in MS Powerpoint)? It allows the presenter to see the presenter to see not only the currently projected slide that the audience sees but also a preview of the next one plus speaker notes for the slide and a timer.
Is this possible, or is there a work around or can this feature be included.
Thanks

It would be nice, but at present there is no such view. If you go to properties (under edit), the full screen menu gives you the options that can currently be used. There is supposedly a dual screen option, but it does not come up properly for me. You might try it and have better results.

Need Extended Version of JCO Pool Viewer Tool for SSO Expiration Problem

Hi, SDN Fellow.
When we are running some of our Web Dynpro application, it ran into this error". Cannot create JCOClientConnection for Logical System XXXXX_WD_MODELDATA_DEST - Model class xxxxx. The SSO ticket needed for authentication to XXXXX_WD_MODELDATA_DEST has expired. Close all applications and lofon anew!"
We have researched on this error, and find that the optimal fix is to upgrade to SP12, then use the Assertion Ticket. But we are currently not ready to apply SP12 from SP11 yet.
I have read about SAP Note 1130191 - JCO Pool Viewer Tool for SSO Expiration Problem.
For workaround fix, we decided to try out Extended Version of JCO Pool Viewer Tool to clear the cache when this error occurs.
The note did not mention where can I get the tool. I remembered I read a blog on this tool too, but could not recall the blog link. Can anyone guide me where can I get this tool?
Thanks,
Kent

Hi Cui,
Navigate to Content Admin-> Web Dynpro-> SAP.COM space in left navigation area.
There you can find the EAR/WAR file for this tool, open it and click on run.
Now it will show you list of threads which are faulty, you can remove the faulty thread from this list.
So no server restart is needed in case of one thread failure.
If you are not able to get this tool, I will mail it to your ID.
regards
Kedar Kulkarni
Reward points for useful answers
Edited by: Kedar Kulkarni on Jun 18, 2008 2:58 PM

Campaign - Need to provide 2 different View Configurations for same Role

Hello,
I need to provide for the same role config key 2 different view configurations for campaigns. Initially I wanted to do that with transaction types, but then I found out that there are no transaction types for campaigns.
Does anyone know a way to do that? I don'T want to use a BADI for it, best would be a standard way.
Thanks!

You use Object Types to distinguish between views of same RoleConfigKey. In SPRO 'UI Framework Definition', you create object types and they would be available when you create a view config. Just select the object type as it forms part of the 'key' that idenitifies that particular view. In DO_CONFIG_DETERMINATION method of that view, you call a config based on this Object Type. So same view can produce two or more configs for same user in different scenarios.

What edition of Oracle DB do I need for Map Viewer 12c?

Hi All,
What edition of Oracle DB do I need for Map Viewer 12c?
Thanks,

What version of Oracle client do I need for a machine with Windows 8?
Windows 8 doesn't require ANY version of Oracle client!
Most installations of Windows 8 never install Oracle client and they have never had any problem except the large set of problems that come included with the OS itself (bugs).
So you clearly need to explain what PROBLEM you are trying to solve.
Then we can help you find the best way to solve it. For example you could download and use the free Oracle Sql Developer and just use JDBC to connect to your databases. Then you don't need an Oracle client at all.

What adapter do i need for my macbook pro for a presentation

what adapter do i need for my macbook pro for a presentation

What model/Year MBP do you have and what are you connecting it to?
Ciao.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

AFP (Advanced Function Presentation) Viewer needed for 10.4.11 or earlier

Similar Messages

Maybe you are looking for