AFP and ARD not working at all

I have a mac running latest version of 10.6 and it crashed the other day. It restarted fine but since then I have not been able to connect to it from other macs. It doesnt appear in the network list and I cant connect to it on ARD. Even if you manually connect to it in the "connect to server" option. It has Filemaker Server on it which is working fine and it has a web sharing enabled and that works fine. I can also ssh to it with no problems. I have tried repairing permissions, unticking file sharing and re-enabling. I cant think what else to try.

I run into this problem whenever I perform a "Disk Cleanup"
on Vista...
Here's what I did most recently to get it working again...
Here's where I went and what I did:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19166&sliceId=2
Scroll down to #4. Just above that is this:
If the ActiveX Control for Flash Player fails to install,
download the executable installer.
If the information above has not resolved the issue, download
the executable Flash Player installer here:
Download and unzip Install_Flash_Player_9_ActiveX.zip. (
http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_Flash_Player_9_Acti veX.zip)
Save this installer to your desktop, close out all
applications, and run the installer. This may help if you are
having trouble with the ActiveX installation from Adobe.com. To
confirm that Flash Player has installed successfully, please visit:
www.macromedia.com/software/flash/about/.

Similar Messages

  • Just downloaded Firefox 4 on Windows Vista 32-bit and its not working at all.

    So I just downloaded Firefox 4 on Windows Vista 32-bit, and it's not working at all. I open up Firefox and there is not tab bar, and all the command buttons are repeated 3 times, and are on 3 different bars. This only happens with Firefox 4 and not Firefox 3.6.10. Also, when I go the menu bar and I try to click soething, nothing happens. I'm not sure why this is going on. Help anyone? Here is a link to a screenshot of my browser.
    http://img683.imageshack.us/i/firefox4y.jpg/

    I have this too, but doesn't even startup now? I downgraded to the previous version and all is OK. I also have a 64 bit version of Vista and it seems to work "a-OK" on that machine.
    Seems to me to be 32-bit issue.
    Editing this post:
    I just seen a possible answer...Do you have roboform installed (in the taskbar also)? If so, try disabling it or removing it and try to start again. I said above that I have 2 units and on the one (32-bit) I have Roboform installed and it crashes, but on the other one I don't...so go figure.
    According to the report I read, if you upgrade Roboform it should be OK, although I have not tested as of yet...I am still at work...
    Hope that helps...

  • IPhone 4s screen is completely black and does not work at all; has not been dropped. Any help?

    I opened up youTube using a shortcut from the Cocoppa app last night, and the screen froze, my home button would not work, so I locked it. The phone was charging at the time and nowhere near dead. After I did so, I pressed the lock and the home button [ not at the same time ] and the screen would not light up at all, it remained completely black. So, I unplugged it and plugged it back into the charger and it made the little sound it does when you do so, that told me it was not dead, and had not turned off. I held the lock button down to turn it off and swiped where the "slide to shut down" bar would normally be if my screen actually worked. It did nothing. My phone screen does not work at all now, even though it makes sounds such as Siri's little pinging noise when you hold down the home button. I am thoroughly confused and urgently need help to solve this problem.

    Hello there, stevo3stevenz.
    The following Knowledge Base article provides some great steps for troubleshooting your iPhone not powering on:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT2693 Downloaded the piano keyboard app and will not work at all...also no sound.  This app only.    Refund??

    I downloaded the piano keyboard app....will not work at all....the screen comes up but no a tigon when trying to use...also no sound.

    Try a couple of basic troubleshooting steps,
    Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Delete the app and reinstall. You will not have to pay for it again as long as you use the same Apple ID that you bought it with. Hold down on the icon until it jiggles, then tap the X on the icon to delete the app. Tap the home button to stop the apps from jiggling. Go back to the App Store purchased tab and download the app again.

  • Copy and paste not working across all apps in lion

    Copy and paste stops working across all apps in lion.  It maybe some compatibility issue.  After a reboot I am able to copy and paste but at some point it stops functioning.

    I am also having this problem.  After running for a while copy/paste stops working, whether from menus or using the keyboard equivalents.

  • Ringer and speaker not working in all applications iPhone5

    When volume is on and I get a phone call, it is either silent or it vibrates if the vibrate on silent option is checked. Youtube and iTunes speakers work fine, but sound in other apps such as Facebook or snapchat do not.

    that's why the button is called silent man

  • I try to connect my iPad to a wifi network and is not working at all what is wrong ?

    I Had connect my iPad to a wifi network and is working if I use it here but if I want to go google and find something is not working and the same happen whit Instagram it shows I am connect but in some parts is not working...

    Hello iPadlil,
    After reviewing your post, I have located an article that can help with Wi-Fi issues on iOS. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Log and Transfer not working at all

    I'm really frustrated by the Log and Transfer procedure. Does it actually really work?
    I have some HiDef video on an SD card, (no mixed media, just the video files) and the Log and Transfer option WILL NOT bring any of the files in. They are all AVI files, 720p, readable/playable by QuickTime, even readable and usable by FCE if I drag and drop each file, although to watch it without stuttering, I need to render it. The video is from a D-SLR (Pentax K-x to be exact)
    But I want it in a native format so after it brings it in, I don't need to re-render it every time I move or trim it .0001 seconds in one direction.
    When I try and do the Log and Transfer procedure, I get the error message that :
    "xxxx contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
    No support for 720p AVI files? Seriously? That just can't be right.
    I have tried selecting the top level mounted object as well as selecting various directories drilling down into the card's data. Same error message every time.
    I have also tried selecting various "Easy Setup" configurations. None made any difference what so ever.
    The manual seems to suggest that you just select the media object and the magic happens. What the heck is going on? Any ideas?

    Hi -
    FCE currently supports 3 types of media directly:
    !http://www.spotsbeforeyoureyes.com/FCEOpenTimeLine.jpg!
    The latter two types, HDV and AVCHD it supports by converting the video format to Apple Intermediate Codec (AIC) during the ingestion process.
    The video that your camera makes is none of those formats, so you will need to convert the video to a format that is usable in FCE natively. This is why you are unable to use Log and Transfer. In order to use Log and Transfer, you would need to have video that conforms to the AVCHD standard.
    You can manually convert your video files by downloading MPEG Streamclip (free) from
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    and converting your video to AIC 720P.
    Then use easy set up in FCE for HDV 720P and manually import your files by going to the menu File > Import, or simply dragging the files from the finder to your FCE browser.
    You don't mention what frame rate you camera shoots at, but FCE only works with standard broadcast frame rates (29.97 fps), so it won't be able to use 24fps material.
    You would need to use Final Cut Pro to natively support that.
    Hope this helps.
    MtD

  • Drag And Drop Not Working At All

    I've been banging my head on this one for a few hours now. If
    I go
    here
    and download the example air app and install it, it works perfectly
    fine. However when I create my own air application in and
    copy/paste the code and try to debug or run it through flex it
    doesn't allow me to drag an image onto it. Is there something
    special in Flex Builder that you have to do to get this to
    work?

    Ok, If I publish a release build of my air app then the
    functionality works.
    Is it not an option to have drag and drop from the desktop
    when debugging the application in Flex Builder? Seems kind of dumb
    that this would not be allowed.

  • Where do I report an application that is selling that does not work at all?  "Translator with voice" for Ipad.  I consider it shold have being filtered and not allowed to sell

    I bought an application, the Translator with voice and does not work at all. I consider that is so pooly develop that is near a fraud.  Where should I report it? Out of all imputs That I tried none was translated appropiate.

    If it's not working as described then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link.

  • 2 of 4 speakers and Subwoofer not working for Altec Lansing Lucasfilms THX Surround (circa 2003)

    I am attempting to connect my Altec Lansing Lucasfilm THX 5.1 sound system to my HP ENVY All-in-one. I think the original audio card for the sound system came on a Dell with Soundblaster. 
    I have connected the green audio to the jack in the back which only gets 2 of the 4 speakers working (even after configuring the speakers). The subwoofer is connected to the sub jack in the back panel as well and is not working at all. I realize that I am trying to have an ancient sound system work with my fancy new HP Envy. Am I asking too much??  I thought maybe a driver update might be needed. But in theory, if those jacks are available in the back it should work (she says optimistically).
    Any suggestions or advice would be appreciated.

    Not a problem.  Thank you for the additional information.
    It sounds like you have the speakers connected correctly.  If there is only one connector for all of the speakers, it may be that you will only be able to use two of them.  However, I am not certain why the subwoofer isn't working.  Is it selected in the Control Panel / Sound?  I realize that you said the speakers are configured in the Control Panel, but is the subwoofer separate?
    I have an old (2001) Polk Audio set of speakers.  I have only been able to get two of them and the subwoofer to work with my new HP computer.  It sounds fine without the other two speakers.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • TS1424 I was buying songs on my itune account, and now my itunes icon on my computer will not work at all, I do not know how to sign back into

    I was buying songs on my Itunes account and I signed-out and now my Itunes icon on my desktop will not work at all.  How do you access your account

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

    i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Maybe you are looking for