AFP client "connection failed 32" - 10.4.7 AD bound client & server

Please, can anyone help with this?
Two G5s, clean installed, one as 10.4.7 client, other as 10.4.7 server. Both machines bound to company's MS AD. AD machine logins fine. AD lookups etc all working fine. DNS Forward and Reverse on server fine. Nothing else installed on either machine, no settings meddled with. Bound to AD with default settings.
Problem: When client attempts to connect to AFP shared volume on the server, message "Connection failed 32" appears. On first attempt after client reboot to connect to the share, the credentials pane appears (Domain, blah...) then, after OKing, the dreaded "Connection failed 32" message appears. Subsequent attempts to connect during the same session misses out the creds pane and returns only the 32 error message. I've looked up Apple's error codes but 32 doesn't exist.
Any non-AD bound client on the same network can connect to the same share fine via AFP, even LDAP clients using their AD creds.
I'd just config all the clients for LDAP to get round this but there are several reasons why that's a no no (mostly company security policy). It's either get all Macs fully AD bound or take them off the network.
Kerberos is used. Is this problem related to that? Sorry but I'm not a Mac or Networking Guru so I don't know which logs etc. to look at. Any help at all would be most appreciated - can't begin to tell you the hassle this is causing.
It would be something to find anyone with the same problem at least.
Thanks.

A development on this:
By setting the Authentication method (Server Admin, AFP, Settings, Access) to Standard, rather than Kerberos or Any, clients can now mount the share OK, and still using their AD user credentials rather than a server local account.
Not sure what the security implications for this method are. Or is that just a red herring anyway? As long as the users are authenticated against our AD (via Kerberos) I'm happy for now.
Now then, if only Apple's SMB server would allow our PC clients to connect to the Mac shares I'll be fully home and dry. Come on Apple, where is SMB signing? Thursby have it. And don't tell me I can just disable it on the MS AD servers - absolutely no chance of that in a corporate PC network. And please don't tell me I can use DAVE to do the SMB sharing - it handles the signing but slows down AFP access to a crawl when everyone logs in.

Similar Messages

AFP drive connection failed

hi,
i have a NAS which i setup to be connected with my macs.
the icon for this nas drive (AFP) is located on the left part of the finder under "shared". i want to enter in my name and password every time i connect to this drive but the log in screen won't show up. it just shows connection failed when i click on "connect as" button.
do you know what i need to do to have this log in screen to show? i've tried connect to server but if i do this way, i will have to connect to each folder one by one which i do not want to do.
thanks!

Just got a 2011 Mac Mini, the cheap one, and downloaded the Server App.
My local tech support (my Nephew) was NOT happy about Lion Server.... wanted to UPGRADE to 10.6 To be honest, I can see why, it has so many bugs I was regretting the download of 10.7 server.
Being impatient and not wanting to go thru the hassle of changing OS's, I just started dinking around. Note, I'm just home user, I'm fairly tech saavy, fairly new to MAC, I know nothing about servers. We have to two MBPs and this new mini, that's it.   I just wanted faster backups, fast storage for music and other stuff, and that's about it.
SOLUTION: From the Server App, I simply clicked Time Machine, turned it on, and told it what drive to use... BOOM, I'm done, that's it!    All I had to do was point my MBP to that drive an starting the MBP TimeMachine.   Its that easy. Wow, really!
OTHER THOUGHTS:
I have a 4TB WD RAID (2 TB RAID 1).   Its Firewire 800, so reasonable fast, and literally 6X cheaper than the equivalent Thunderbolt Promise drive (take a hike).    My only concern is the Server puts all the client Time Machines in one partition... Now I have to figure out how to resize it.    It blows me away a "server" doesn't have tools to resize a partition. Guess I'll have to load iPartition.
I was using a the same drive on the USB port of the Airport extreme. It was DOG slow! But it worked and is probably the cheapest network time machine setup you can have.   Now, for 650 more, I have 100Mb backups and a cool new toy to play with.   I'm probably going to upgrade my switch to gigabit. Then I'll have braggin rights over any other house on the block.

Internet connection failed to configure DHCP ipv6 on Small business server 2008

1. disabled ipv6 on nic and RESTARTED SERVER....
2. realizing i did a mistake, i renabled ipv6 on nic after that
3. now fix my network gives error report DHCP not configured properly for IPV6
4. ipv4 has fixed ip address (192.168.43.9), router ip 192.168.43.254, i chose dynamic ip assignment for ipv6 (not sure should be static or dynamic).
5. Fixed my network assigned fixed ip address automatically but failed to fix error DHCP for ipv6 for the network.
6. i also tried internet connection wizard, which fails reporting error Internet connection wizard cannot configure dhcp for ipv6 sbs 2008. this
error is received after click NEXT button on successfully server and router ip on Detecting Router and configuration page.
Although I am not using IPV6 but server may be using it. Can someone please please help me.
thanks

Hi,
I can find that there is a
same thread that you posted in the forum. I had replied it. Please check if can help you. Just remind that please reboot when uncheck IPv6 option and monitor the result. Meanwhile, please check if can find some relevant issue when you run
SBS 2008 BPA.
In addition, please refer to the following thread and skip the DHCP check, then run the wizard. Please check
if this wizard can be ran completely. If run successfully, then enable the DHCP
again.
SBS
2011 is detecting DHCP on my network after I disable it and i cant continue setup
Hope this helps.
Best regards,
Justin Gu

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

C7 | Connection Failed - Access Denied - Invalid S...

Hi,
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
If someone can help me to understand the problem and resolution to it.
Thanks-
Amit

Hey Amitbbb, Welcome to the Nokia Forums!
The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle.
If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store > My stuff. If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
Close Nokia Suite via File > Exit.
Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via USB > Mass storage on your device.
Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
Reboot your phone.
Verify that you are able to browse Internet on your phone.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
I hope this helps and that you manage to resolve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

AFP client "connection failed 32" issue solved

I'm making this post because of the difficulty I had in troubleshooting this AFP error and hope someone will benefit from my finding.
I have a client whose server was responding with "connection failed 32" whenever anyone tried to connect to shares on the attached XRaid. The AFP log indicated entries like this:
Login admin
No matching key: admin
After much searching for hints on the forums I couldn't find any solutions. Some postings I read mentioned that the AFP problem was related to SCSI boards on their server. Not having one on our server I went after the nearest such item, namely Firewire. I finally solved the problem by unmounting the bank of 4 Firewire backup drives.
Although I have no idea why the AFP problem is related to the backup drives, it turned out that once I ran Disk Utility to repair the FW drives and remounted them, AFP worked once again. DU found "Directory name locked" on two of the drives and repaired them.
G4 Xserve Mac OS X (10.4.8) XRaid and Firewire backup drives

Hi apta
No matching key: admin
This seems to indicate a Kerberos key transfer of some sort that has not been recognised or was out of sync. Probably nothing to do with the actual problem which you have fixed. But that is what the log seems to be indicating to me.
Just a thought thats all

Suppress "Connection Failed" Error Messages on Client?

Hi there,
I have a Leopard server which is Managing Preferences for users in groups. In my Login Preference for a group, I have it basically "auto mounting" shares, such as smb://leopard-server/accounting and smb://leopard-server/graphics.
The works great so far. A user logs into their machine, managed prefs determines their group membership, and poof all the appropriate network drives show up on their desktop.
Problem is - when a user is off the network (for instance, at home with their laptop), after they power up and login they are immediately assailed with error messages, one for each failed connection to a network drive: "Connection failed. The server may not exist or it is not operational at this time".
Now it is understandable why Leopard is bringing up those error messages - it's trying it's best to connect to the network drive but the user isn't on the network.
Question is: is there any way to suppress these error messages and let the users who are off-network boot to their desktop "quietly"?
I know you can hold the Option key at login in order to turn off Managed Prefs altogether, but the problem with that is users tend to forget to turn Managed Prefs back on when they get back into the office.
Any ideas?

It's not just you, I am seeing this behaviour too.
Where 10.4 clients would fail silently, 10.5 is throwing the "Connection Failed" error message as you described.
I agree it is confusing to end users and would like a way to supress it, the only thing that springs to mind is manually mounting the share via a login hook that first checks network availability rather than using a WGM configured mount. Trouble is, to mount an afp share with the users credentials via a script is a whole new problem in itself.

JCo client connection Failed to create new JCO client connection

hi All
I am trying to create a new JCO destination ion CE7.1 webdynpro content Admin. but I am getting following error.
Exception while creating JCo client connection Failed to create new JCO client connection weter: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ACCESS_DENIED: User is not in role LcrInstanceWriterLD at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:220) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:669) at ......
SLD is Up and running
CIM data is imported
Solution tried :
1) As no role wtih name LcrInstanceWriterLD was existing in the server ,hence created a new role with same name and assigned the LCR related action . Assigned the role to the user through which we are creating JCOs.
But we still getting the same error.
regards
Poonam

Hi Poonam!
Got to dig in the past a bit, I remember Users being able to create SLD object have to have certain permissions set in the J2EE UME. Simple Admin rights do not suffer, if I recall right.
Unfortunately I cannot go further in detail because this issue has been solved by a long gone collegue of mine.
Good luck anyway!
Jürgen

Exception while creating JCo client connection Failed to create

Hello all -
I am trying to create JCo metadata connections and I am getting the below error trace.
Exception while creating JCo client connection Failed to create new JCO client connection SAP_R3_HumanResources_Metadata: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to change password for key SAP_R3_HumanResources_Metadata in secure storage at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:149) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:299) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:265) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.storeObject(RemoteSecureStorageClientContextImpl.java:600) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:137) ... 33 more
Could anybody please suggest what is wrong with this creation?
Thanks much!!

Hi Maria,
Please update the host and sevice file first then check the SLD test and SLD Data supplier in visual admin.
Also check and verify the data using in the Jco destination creation.
Hope it will helps
Regards
Arun Jaiswal

Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
    User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.

Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

FaultCode:Client.Error.MessageSend faultDetail:'Channel.Connect.Failed

Hello Everyone,
I'm kinda sure a lot of people have to deal with the same error, but I can't solve it using explainations given in other topics. So here it is :
I'm trying to create a Flex project on Adobe Flash Builder 4.0, using J2EE, BlazeDS and Tomcat6.0.
To have a good start, I want to try some basic interactions between java & flex. For that, I created a java class with a functions returning a String, witch is called when a button is clicked in my main panel :
remoting-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
    class="flex.messaging.services.RemotingService">
    <adapters>
        <adapter-definition id="java-object" class="flex.messaging.services.remoting.adapters.JavaAdapter" default="true"/>
    </adapters>
    <default-channels>
        <channel ref="my-amf"/>
    </default-channels>
     <destination id="hello">
        <properties>
            <source>test.HelloWorld</source>
            <scope>session</scope>
        </properties>
    </destination>
</service>
HelloWorld.java
package test;
public class HelloWord {
    public String sayHello()
        return "Hello from Java";
project.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="1000" minHeight="600">
    <s:Button x="200" y="200" label="Button4" click="callHello(event)"/>
    <fx:Declarations>
        <s:RemoteObject id="roHello"
                        destination="hello"
                        fault="onFault('roHello',event)">
            <s:method name="sayHello"
                      result="onResult(event)"
                      fault="onFault('roHello.sayHello',event)"/>
        </s:RemoteObject>
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.rpc.events.FaultEvent;
            import mx.rpc.events.ResultEvent;
            import mx.rpc.remoting.RemoteObject;
            private function callHello(event:MouseEvent):void
                roHello.sayHello() as String;
            private function onResult(event : ResultEvent) : void
                var retour:String;
                retour = event.result as String;
                //Alert.show(event.result.toString());
                Alert.show("success::"+retour);
            private function onFault(remoteObject : String, event : FaultEvent) : void
                Alert.show(event.fault.message);
                //Alert.show("fault");
        ]]>
    </fx:Script>
</s:Application>
When I launch my application, the button is created. But as soon as I click on it, I got the following message :
faultCode:Client.Error.MessageSend faultString:'Echec de l'envoi' faultDetail:'Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 404: url: 'http://localhost:8080/WebContent/messagebroker/amf''
any idea how to solve it ?

I've resolved my issue. Perhaps you are correct that my tokens were not resolving, but since you did not offer a way to fix that, I was still on my own. There was nothing helpful that I could find in the console or log.
I found this article, and after using his architecture (using an external config file to define the amf endpoint at runtime) I was able to connect to the back end. I was also looking for a good way to externalize information, so I recommend reading this article:
http://coenraets.org/blog/2009/03/externalizing-service-configuration-using-blazeds-and-lc ds/

ODBC connection failed (SQL Server Native Client)

Dear ..
I tried to connect to ODBC with SQL Server Native Client 11.0.
It successfully connected in SQL mgmt studio : (LocalDB)\AAA
but when I tried to connect to ODBC, it's failed like below..
[Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'KKIKKI\Jinsu'.
[Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "MAPDB" requested by the login. The login failed.
test failed.
How to initialize all of my SQL Native Client and ODBC configuration?
I tried to remove all SQL application, but it's same situation.. Please help..
jinsu

https://www.connectionstrings.com/sql-server-native-client-11-0-odbc-driver/
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

Connection Failed: AFP System Failure

All of a sudden, I cannot connect to another computer from my MacBook Pro (intel 2.16 ghz Core Duo) through a wireless network. I always click on the nework icon, pick the computer, enter the password but now I get the "Connection failed: AFP system error has occurred". I haven't changed anything lately (that I know of) and am updated completely according to software update.
I can connect to the laptop, connect from the laptop to the internet and ping another computer without difficulty.
Can anyone suggest what to do to correct this?
Thanks

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
If that doesn't cure it, then try Connect To Server and put in afp://ip.of.some.mac

IPhoto 8 & iMovie 8 give my mac a 'Connection Failed Error' then AFP error?

After installing iLife 08, both iPhoto & iMovie cause my mac to try to connect to an unconnected server/network/drive.
I get a Connection Failed The Server May not exist ... error, which eventually becomes an AFP error. Can I stop this? They both seem to be trying to connect/mount to a drive (that no files related to them are or have ever been stored on relating to previous iPhoto libraries.. any ideas)
Not impressed with this new set really... iWeb crashes instantly. Nice.

I'm getting this too but only with iPhoto.
Before installing iLife '08 I moved my three iPhoto 6 libraries from my iMac G4 to my MacBook (via AirPort) as per the instructions in 'How to move the iPhoto Library folder to a new location'. I disconnected from my iMac and then launched iPhoto 6 on my MacBook to make sure each library was intact.
I installed iLife and successfully upgraded each library but now each time I launch iPhoto 7 my MacBook tries to connect to the original location of the libraries and, if the iMac is asleep, gives the AFP error Tim mentioned above. If I then quit and re-launch iPhoto I get "Caution: the iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it".
I can solve all this by making sure that my iMac is awake when I launch iPhoto but this is pointless if I'm out of AirPort range.
Grr.
Message was edited by: Timmargh to add clarity

SAP gateway connection failed in IC Win Client -- How to connect it ?

Hi experts,
While accessing the lead questionaires for IC Win client..
I get the error message as follows
" SAP gateway connection failed. Is SAP gatewaystarted? "
Can u share with me as how to establish the SAP gateway connection ..
I am grateful for your help..
I woul like to thank and appreciate you by rewarding the points
Thanks and Regards,
Matthew

Hi experts,
While accessing the lead questionaires for IC Win client..
I get the error message as follows
" SAP gateway connection failed. Is SAP gatewaystarted? "
Can u share with me as how to establish the SAP gateway connection ..
I am grateful for your help..
I woul like to thank and appreciate you by rewarding the points
Thanks and Regards,
Matthew

AFP client "connection failed 32" - 10.4.7 AD bound client & server

Similar Messages

Maybe you are looking for