Afp connection problem after security update

hi, after installing the security update 2011-002 on the server i can't connect via afp to the server. passowrd ok, then no connection! where is the problem.

You're not posting near enough information to troubleshoot this.  Have you verified permissions or checked to see if the share in question is actually being shared by AFP?

Similar Messages

  • Printing problems after security update

    Any fixes to the printing problems (for me it is with Quicken) after the security update??
    Don

    There are several threads popping up over in the Mac OS X v10.6 section of ASC about the Security Update.
    Mac OS X v10.6 Snow Leopard: Mac OS & System Software: Apple Support Communities
    It seems that the update has killed printing and other functions for some PowerPC Applications.
    Start with > after Security update 2012-001 cannot...: Apple Support Communities

  • Rosetta Problems after Security Update 2012-001

    My crack team of sys admins and I have devised a method for resolving some of the issues regarding the Security Update 2012-001 and Rosetta.
    http://www.educate-it.org/content.php?130-Rosetta-Issue-after-Security-Update-20 12-001
    Click this link for an Installer that will revert the files necessary for some Rosetta apps to run after the Security Update. This is a band-aid and is only recommended in emergency situations. Apple is currently working on a fix, but until that happens, we are stuck with reverse-engineering their update. I hope this helps those in distress from this update.

    Backup files off the computer (not TimeMachine) and disconnect.
    If you have TM, or a option key bootable clone use that to erase and restore from.
    If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions,  (do not format or erase!!) and simply re--install 10.6 from the disk. Note: Does not touch your files and most programs, but backup your files regardless.
    Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
    Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
    When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
    If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
    Learn how to clone here
    http://www.bombich.com/get_ready_for_lion.html
    TM help here
    http://pondini.org/OSX/Home.html
    Learn how to make copies of your 10.6 disks here
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Learn which programs ARE NOT compatible with Lion
    http://roaringapps.com/apps:table
    Long live the Snow Leopard.

  • AFP Connection Problems after Server Security Update 2009-006

    After installing the Security Update 2009-006 on the Server, we have Problems to mount Shares from two differnt AFP-Servers on the Client.
    The Client and the Server have a binding to AD.
    The Client can connect to Server1 via AFP.
    But after this, the connection to Server2 shows the Volumen List from Server1!
    Same Problem when the first Connection mounts Server2 and then Server1.
    I tried the second connect with DNS-Name and IP-Adress.
    There is no Problem when i am useing SMB.
    Have anyone a Idea or the same Problem?
    Thanks
    Sven

    Hi kapteyn,
    If you are having issues connecting to your WiFi network from your MacBook Pro after a recent security update, you may find the troubleshooting steps in the following article helpful:
    Apple Support: About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Regards,
    - Brenden

  • Mail 2.1.3 Port Connection error after security update.

    I have 6 active email accounts that are normally checked by Apple Mail. After installing the most recent security update yesterday, 4 of the 6 accounts stopped connecting to their respective ports. Two of them are POP accounts (both gmail accounts on port 995), two are IMAP (ports 993 and 143), all four use SSL in the advanced settings. Of the two accounts that still work, one is an IMAP account (port 143), the other is a POP account (port 110), both without SSL. Firewall is on.
    I get the error:
    "There may be a problem with the mail server or network. Check the settings for account "account name" or try again.
    The server error encountered was: The connection to the server "correct server" on port 995 timed out."
    The error is the same for all four accounts, with their respective ports.
    I have checked my server settings and verified that they are all correct. I can login to webmail for all of these accounts and read my mail without problems.
    Mail Connection Doctor says:
    "Could not connect to this POP server. Check your network connection and that you entered the correct information in the Accounts preferences. Also verify that the server supports SSL. If it does not, uncheck the "Use SSL" checkbox in the advanced tab of Account preferences."
    All four accounts require use of SSL.
    I have tested their connections on two different wireless modems and an ethernet connection to the same network as one of the wireless setups. No change.
    I have tried turning off my firewall. No change.
    I tried setting up one of my gmail accounts as an IMAP account instead of POP. This did not work either.
    I have tried adding a Firewall Port connection for ports 995, 993, and 143 as both TCP and UDP numbers (independently and together). No change.
    I have tried following these instructions from Mulder in response to another user's topic:
    "1. Quit Mail if it's running.
    2. Go to Home/Library/Caches/Mail and delete all the sub-folders within that one.
    3. Go to Home/Library/Mail and delete this file:
    • LSMap2
    4. Restart Mail and see if it works."
    No change.
    Any other suggestions?
    Message was edited by: groovysuvi

    I did get some suggestions from this
    http://discussions.apple.com/thread.jspa?threadID=1766017
    thread, but still no email from those four accounts. Does anybody else have any suggestions?
    I really do not want to have to resort to webmail and/or my iphone for my email needs.

  • Internet connection lost after security update HELP

    Help, After i installed security update suddenly recently i couldn't connect to internet. But i can see my airport connection in the airport utility and it doesn't have any problem with it. I directly connected the cable to my imac(detaching the cable from airport and connected it directly to imac machine) and still I cannot connect to internet. I don't know what happened, can somebody help me and tell me what's wrong with my mac.

    try the firewall settings in the system prefrences.
    if not it could be your ISP.
    JS

  • Airport connection problems after software update

    I cannot connect to a Wi-Fi network I have been using for days. This happened after installing software updates for quicktime, itunes, airport extreme, safari and Security Update 2008-002.
    When i run network diagnostics, it tells me this network needs a WEP or other password. It doesn't. My wife's macbook pro, on which we have not installed the same updates, connects perfectly, just as my macbook did.
    Any thoughts pls? Can i uninstall the updates, or restore my laptop to a few days ago, as you can with windows?
    Thanks

    You know... that might just work, but you have to find the .pkg in Library>Receipts that prevents you from running the older one, like maybe "AirPortSW.pkg" or something close. That's were it liooks to see what it can install.
    (If it works, you could log in with a New Alias and give yourself a Solved Star, while being able to drop an Alias that is on the edge of being eliminated, or at least not going to get answers from many helpers here).
    The other mention was a way to manually do it by finding the kext in a combo or security update!

  • Airport Problems after Security Update 2007-004

    Ever since I've installed Security Update 2007-004 my Airport connection has been dropping about every 15 to 30 minutes. Sometimes Airport will stay connected but will stop working until I renew my DHCP lease (I get the same IP though). When it drops I click on the Airport icon to reconnect but my network doesn't always show up. Sometimes I have to turn Airport off and back on again to make it show up, and a few times I've had to reset my computer to make it show up.
    I have a MacBook Pro with an 802.11n card. I'm using two different routers; one at work, and one at home. The work router is a Linksys N router while the one at home is a Linksys G router.
    I've tried all the tricks. Repairing Permissions, deleting the extension caches, installing the standalone updater, but nothing is working.

    Deleting AppleAirPort2.kext solved the problem for some...
    http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
    While others had to rollback the AppleAirPort.kext to version...
    http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
    Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

  • System problems after Security Update 2007-007 install

    Hello all,
    I am having problems with my computer after installing the 2007-007 security update. Specifically, the keyboard and mouse become non-functional at random intervals. The system has not frozen up, though, as items on the screen continue to update. Each time this has happened, I have had to ssh into the machine from another one and reboot. I am on a dual G4 Powermac, 867 MHz with 2 GB of RAM running OS X 10.4.10. Does anyone have any suggestions on what could be causing this?

    Hard to say. Have a bootable backup of your installation before the update? Did you repair permissions and repair the disk before installing? How soon after rebooting does the problem come back? Have you checked the console and system logs?

  • Problems after Security Update 10-05

    Installed today's Security Update from Software Update, restarted, and ran Permissions Repair (as usual). As usual there were several Flash/Java permissions which needed fixing, but while this was happening I kept getting a window telling me that "WebKitPluginHost quit unexpectedly" and that a long report of tech-speak would be sent to Apple.
    There's no sign of WebKitPluginHost in Spotlight, so I presume it is something to do with my only automatically loading Login item, which is DropBox. This guess was supported by the failure of Dropbox to launch at all, even when I followed the maker's advice and trashed all their settings.
    I restarted the computer, re-ran Permissions Repair, disabled automatic loading, and re-started. Still no Dropbox. It was working fine before the Security Upgrade, so I presume it's a problem with the latter, rather than the former.
    I ran Permissions Repair again, and it told me all the Java ones it had just repaired had to be repaired again!
    Anyone else having post-Update launching or permissions problems?
    Anyone have a suggestion?
    Can I "Uninstall" the Update and see if that fixes things?
    Will a "Safe Boot" ignore the Update??
    Added: I tried restarting and logging in with a new user "Test" account, but the problem was the same, which I think indicates it is a system problem?
    Message was edited by: makrhod

    I tried 'Safe Boot", and had the same problem, but when I rebooted again in normal mode, everything worked! I don't understand why it took 4 restarts and 2 Permission Repairs to get things going after the Security Update (the only thing I have downloaded for a week or so, by the way), but my own particular problem is solved.
    I'll mark this as answered, but someone else may need to post if they find the Update causes strange behaviour.

  • Serious connectivity problems after recent updates

    Hi
    I have serious problem with my WIFI after recent updates from App Store.
    I have good router, good internet connection and strong signal - I tested it on Windows on bootcamp and everything work perfectly.
    iPhone also works with no problems.
    On OS X it's very hard to load a web page, only sometimes it works good, as shown on ping, i have 41% packet loss:
    apple ~ $ ping google.com
    PING google.com (77.252.2.84): 56 data bytes
    Request timeout for icmp_seq 0
    Request timeout for icmp_seq 1
    Request timeout for icmp_seq 2
    Request timeout for icmp_seq 3
    Request timeout for icmp_seq 4
    Request timeout for icmp_seq 5
    64 bytes from 77.252.2.84: icmp_seq=6 ttl=61 time=10.822 ms
    64 bytes from 77.252.2.84: icmp_seq=7 ttl=61 time=11.484 ms
    64 bytes from 77.252.2.84: icmp_seq=8 ttl=61 time=10.331 ms
    64 bytes from 77.252.2.84: icmp_seq=9 ttl=61 time=7.437 ms
    Request timeout for icmp_seq 10
    Request timeout for icmp_seq 11
    Request timeout for icmp_seq 12
    Request timeout for icmp_seq 13
    64 bytes from 77.252.2.84: icmp_seq=14 ttl=61 time=10.638 ms
    64 bytes from 77.252.2.84: icmp_seq=15 ttl=61 time=6.316 ms
    Request timeout for icmp_seq 16
    64 bytes from 77.252.2.84: icmp_seq=17 ttl=61 time=10.694 ms
    64 bytes from 77.252.2.84: icmp_seq=18 ttl=61 time=15.901 ms
    64 bytes from 77.252.2.84: icmp_seq=19 ttl=61 time=46.882 ms
    64 bytes from 77.252.2.84: icmp_seq=20 ttl=61 time=18.987 ms
    64 bytes from 77.252.2.84: icmp_seq=21 ttl=61 time=18.911 ms
    64 bytes from 77.252.2.84: icmp_seq=22 ttl=61 time=7.705 ms
    64 bytes from 77.252.2.84: icmp_seq=23 ttl=61 time=8.714 ms
    64 bytes from 77.252.2.84: icmp_seq=24 ttl=61 time=18.261 ms
    64 bytes from 77.252.2.84: icmp_seq=25 ttl=61 time=8.952 ms
    Request timeout for icmp_seq 26
    64 bytes from 77.252.2.84: icmp_seq=27 ttl=61 time=16.877 ms
    64 bytes from 77.252.2.84: icmp_seq=28 ttl=61 time=7.876 ms
    ^C
    --- google.com ping statistics ---
    29 packets transmitted, 17 packets received, 41.4% packet loss
    round-trip min/avg/max/stddev = 6.316/13.929/46.882/9.219 ms
    I'm using no proxy, no additional firewalls, antivirus, vpns (tunnelblick is installed but not used) etc - just simplest possible wifi connection with no changes to default configuration.

    I checked my System Log in Console and cannot find anything useful. One msg about the connection:
    27.02.2013 07:17:41,096 UserEventAgent[11]: Captive: en1: Not probing 'NETIASPOT-653980' (protected network)

  • Start up problems after security update 2014-002

    Hi, after this update sometimes my Mac does not start up like it should: the Dock is not appearing and the screen is flashing between fully grey and thenormal background.  The only cure seems to be to restant a second or third time. Already resetten PRAM, used disk utility (no problems) and repaired permissions. Does anyone else has encountered this problem? Thanks

    I have always had good luck with DiskWarrior. I've had serious issues and DiskWarrior has always come thru .
    Are you nervous because you have never used DW before, or are you afraid it will hose your system?
    By your report, it kinda sounds as if your hard drive has either failed or on it's last leg.
    I'm guessing you had issues with the drive before installing the update and you did not know it. Updates tend to point out problems in a big way sometimes.
    I run repairs on my hard drive before installing any updates.
    I don't remember, does Jaguar have S.M.A.R.T. status in Disk utility? If so, what does it say about your drive?
    Dale

  • Problem after Security Update 2010-003

    Hello,
    Since i installed the Security Update 2010-003 i have a problem at the login-screen an password-prompt like this http://twitpic.com/1j66kr
    Have you any idea to fix it?
    Thanks a lot!
    Greiber

    Hi and Welcome to Apple Discussions.
    These symbols are from Apple's Last Resort font, and indicate that a major problem has arisen with the OS's ability to use the basic system fonts. It's been reported here a few times, and I think the only solution is to reinstall all system fonts. See Kurt Lang's post.
    Here is a user tip by Kurt Lang that lists all necessary system fonts and their locations.
    -mj

  • Connection problem after firmware update 7.5.2

    Until I update 7.5.2, my Airport Extreme station worked fine. But now every time my computer starts it fails to connect to the station. I have to recreate à new connection on my MBP or I have to disable and enable Airport repeatedly to establish a connection. (No connecting problems with my Iphone, but same problem with another MBP).
    Need some help, thanks

    The question of which channel to use is very dependent upon your environment. Probably the #1 item to work through is finding a channel that is relatively free of other interference. This is especially true of the 2.4 GHz band (802.11 b/g) which has been used for quite a few applications. This includes:
    - Other WiFi base Stations
    - Bluetooth devices
    - Microwave Ovens
    - Some Cordless phones.
    In the case of Cordless Phones and other Base stations, these can often be from your neighbors, so you may have to use trial and error to find a channel.
    In my particular case, all of the devices which were failing were trying to use the 2.4 GHz band on 802.11 b/g. When it was set to "Automatic" the Base Station software indicated that my base station was using Channel 1. I just set it to Manual and selected Channel 3 and things started working for me. (Since it required me to make a selection for the 5 GHz band, I whose Channel 48 for that)
    The key in any situation is to find one not in use by other devices. Normally, selection of "Automatic" allows the Base station to make this choice by listening when it is not broadcasting and trying to sense other items on the same channel. However, this doesn't always work 100% because your end device (like your PC) may be closer to the other source of interference and it can "hear" transmissions that the base station cannot.
    What I find strange is that this inability to select a free channel appears to have been triggered by the firmware upgrade, so perhaps there is something in this new firmware which doesn't do as good of a job of finding the clear channel to use.
    I hope this helps someone else out there as well!

  • Booting problems after Security update

    Hi,
    A couple of days ago, I did a Security Update and an update of Safari or Quicktime, I'm not sure. Afterwards, when I started my computer (an iBook G4, 3 years old), it shows the grey Apple-screen and then switches for a second to the blue Mac OS-screen with the bar that should be filling up. However, no filling up happens and a blue screen appears where the mouse-pointer can be seen and moved.
    I tried starting up with Safe Boot, but the only thing that happens, is that the spinning wheel on the grey Apple-screen turns quite a while longer. Afterwards the exact same things happen.
    I also tried booting from 2 Install Disks, both however not the ones that came with my Mac. (That one I can only get back in a couple of WEEKS.) One of those disks came with an eMac (Mac OS 10.3), the other one with a rather recent MacBook (Mac OS 10.4). In both cases, it won't boot from the disk. With the 'old' one, I get a black screen with mouse-pointer (not moveable) after the grey Apple-screen. With the 'new' one a blue screen appears after the grey Apple-screen.
    Can anyone help me?
    Tx,
    Bas

    Did you do a backup before updating? Did you repair permissions before and after, as well as repairing the drive with Disk Utility beforehand?
    I know you can't install an OS with a disc that came with another model computer. I'm not sure if it will even let you boot from it, or maybe in some cases and not in others. Have you tried booting in Single User Mode?
    [Mac OS X: How to start up in single-user or verbose mode|http://support.apple.com/kb/HT1492]
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Single-User Mode Commands|http://www.westwind.com/reference/OS-X/commandline/single-user.html]

Maybe you are looking for