AFP problem in 10.3 workstation

Here is my problem, I have two machines running 10.3 when I click on go - connect to server and enter my server that I want to connect to it tells me it could not connect to the server becuase the username or password is incorrect. What file do I need to delete to reset the password someone has saved? By the way the other 18 machines in the room work just fine.

be sure to have every volumes unmounted
go and delete on the keychains, elements concerning the afp volume
this should resolve

Similar Messages

AFP Problem take 2

Ok, in a small network we have a xserver hosting all our network services including some AFP shares.
The problem is that, when i log into my superuser and/or any normal network users to administrate the server - it also mounts my primary network share. Should i happen to click that share, the server will hang infdefinitly.
After it hangs:
-All the network users crash, naturally.
-Looks like finder hangs too
-Server responds to PING
-It`s possible to SSH my way into the server when it hangs.
But, i can`t use ARD or physical access because of the spinning beachball of doom caused by the AFP problem.
How do i solve this?

I am having a similar problem. There seems to be a correlation with the amount of users connected and/or network traffic, and when a user/users is/are attempting a search. My guess is one or more users tries to search, it slows the connection, a few users try to access the server... and then it locks up. I haven't found a solution to the problem yet, but it may be due to my network switches. They are old and cranky and may not be able to handle all the traffic.
Intel Mac Mac OS X (10.4.8)

Deleting from AFP problems

Hi -
We import our photos leaving them in the current location, which happens to be on AFP volumes. Everything works well except deleting (not removing) images. It errors out & says the file can't be moved to the trash. I tried it accross different servers, including a Windows server running AFP, and always get the same result.
This is on a Mac.
This does not happen on SMB or NFS volumes.
Any help/Suggestions appreciated.

Okay..
The tables are set up the same.. I had some original relationships what I thought may have been the problem. I removed the relationships to no avail.. Unfortunately, I am using MS-Access and don't know much about it, but I don't know what else to check for. I removed the relationships and the table should not have any problems that my java code couldn't handle.. Any ideas on what i should do next?
Takizzle

Where's the problem??VMWARE workstation + win2003 + DB 10G (EM not working)

Please I need a real help in this , I have Installed Win 2003 Server On VMware Workstation with DB 10 G but the Enterprise Manager Give me Blank Homepage (no Login Interface) , Is this problem happend in Physical installation of Win 2003 sever ?? Is there is any options to be Enabled to let the EM work on Win 2003 server or it's work normally as win XP ,Vista ???
Help!!!!!!!!!!!!!!!!!!!!!!

Hi,
Assuming Windows OracleDBConsole(sid) service is up and running on your virtual machine, issue you are facing could be a browser setting. You should add https://hostname into trusted sites in Internet Explorer or have something similar done with Mozilla Firefox (if that is your prefered browser). After that you'll get a login screen.
Hope this helps.

Using afp problem

Hi, I have a problem connecting to my volume from the server. This just happened today after upgrading from Panther to Tiger. I have a applescript with this lines.
mount volume "afp://username:[email protected]/volume1"
mount volume "afp://username:[email protected]/volume2"
mount volume "afp://username:[email protected]/volume3"
mount volume "afp://username:[email protected]/volume4"
And this script I have it under the system preferences>accounts>Login items. When I start my computer it goes just to first line and gives me an error. "Disk some object wasn't found." So I close this error box then I manually double click on the script and NOW all my volumes get loaded. Does anybody out there now how I can fix this issue?
Thanks in advanced.
Mac OS X (10.4.4)

Hello jcc31
I don't know how to fix your applescript however you don't need to use a script to mount network volumes at login.
In Tiger you just mount your volumes then add them to your login items, drag and drop works. Then if you add your password to the keychain the first time these volumes are mounted the next time you login to your mac all the volumes are automatically mounted.

EA6500 - FTP access problem via Windows 7 workstation

I am using EA6500 and connected a Seagate hard drive for FTP server.
It can be accessed from XP workstation from outside (Browser & Filezilla) but windows 7.
Is there any members have encountered this problem before and got fixed now?
Would be glad if you can share your experience for how to fix it.

Here's what I would suggest:
If both computers are using the same FTP clients (FileZilla and Chrome Browser) but still XP only works, try to check and compare these settings:
User account (do they both have administrator access?)
Are they running on the same WORKGROUP?
Are they running on the same WORKGROUP? (since it was mentioned that they are connecting to corporate network)
In my opinion, since other devices are working, it is not with the router. You need to double check the settings on your Windows 7 and the fact that they cannot ping each other, that means that they do not belong to the same work group. You may try to leave the group, disable-antivirus-software. I've had the same experience before and I did some research about homegroup and it did work. just by disabling the anti-virus.

Os9.2.2 afp problem

Having trouble connecting to a Lacie Ethernet Disk from a Mac running OS 9.2.2.
No other networking issues with this station.Is there a patch or an upgrade to the afp software on OS9.

I am not an Apple employee, just a User like you who reads these forums. I answer many of the questions having to do with OS 9-era Networking and Printing.
I have never heard of such a patch from Apple.
If they are so convinced there is a patch, needed to make their equipment work properly, I am sure that they can provide you with a link to it. Asking for a Mac Specialist or a Supervisor can sometimes remind the first-line responders that they do not get Hazardous Duty Pay to deal with cases that are unusual or difficult. You may need to explain to them that if they cannot be more helpful, their equipment will go back in the box and on its way back to them.

NAS/Time Machine AFP problem

Since installing Lion, Time Machine won't play - I get this message now. Concerned that (a) cannot back up and (b) cannot access previous backups (saved on a NAS). Is there any way to roll back to Snow Leopard?
Thanks
M.

sgginc wrote:
I have a Synology 111.
There is an update.
Open the web page, go to Control Panels>DSM update.
It will tell you if there is anything.
Thanks ... Ken
Lucky you Ken. Unfurtunately, my NAS is a DS207+. Any Synology NAS ending in 07 is getting dropped. There was a recent DSM update that my NAS is not picking up for that reason. All those of us with -07 units can hope for is a hotfix. Otherwise, this may come down to either a) upgrading netatalk manually on the NAS (could be somewhat painful) por b) resorting to CIFS or SMB. I dont think CIFS is too bad but it does seem to get penalized big time with small reads/writes based on the benchmarks I have seen. AFP is much more efficient, longer time-outs, etc. so I would prefer to stick with it. Specially when that it is native to OSX.
For now, I am switching my scripts over to CIFS until Synology makes a decision... :-(

Problem install vmware workstation

I have problem to install vmware workstation, my log is
Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so:

DSpider wrote:
Out of curiosity, did you bother to google "Failed to load module canberra-gtk-module" ?
^ Search the forum with this.
i search in google.... but not found anything example
https://bbs.archlinux.org/viewtopic.php?id=120761
https://bugs.archlinux.org/task/23655
the module is installed but not recognized...
javier@cosmico:~ $ sudo find / -iname libcanberra-gtk-module.so
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/usr/lib/gtk-3.0/modules/libcanberra-gtk-module.so
/usr/lib32/gtk-2.0/modules/libcanberra-gtk-module.so
javier@cosmico:~ $

AFP Login slow from only one workstation

Have one OS-X 10.6.4 server and multiple 10.6.4 client machines on 192.168.xxx.xxx network. Logging in to the server via the Finder side-bar is quick from all machines except one. For that machine it can take 2 minutes but is ultimately successful. Since all logins are quick from other workstations it points to problem with this one workstation. Tried changing connection from ethernet to airport with same slowdown. Tried building a new workstation account and logging from that one, same results. It may be relevant that this server had an IP address change and the problem workstation was the only one that logged into it at the old IP address. Suggestions?

I am experiencing the same problem.
My server - 10.6.4 server on a mac mini - also had an IP and DNS change. The problem client has the domain name previously assigned to the server. I do not know if this is a cause. I have scoured the server for any remaining references to the old domain name but there appear to be none. Unlike your case, the problem client is not the only machine to have connected with the server under it's old name/ip (in fact it may never have done so), but no other clients are experiencing the problem.
The slow connect also manifests itself every time you attempt to relist the server shares in the 'shared' section of a finder window sidebar, even if one of the shares is connected. Listing the connected share via the 'devices' section of the sidebar is, however, immediate.
Any ideas where to look in the client logs for troubleshooting clues?

Problem with SATA hard discs and MSI motherboards (could it be the SATA cable)

I have two systems with a Seagate Barracuda 7200.10 ST3250620AS 250GB Serial ATA (3.0Gb/s)
hard disk.
One system has a P965 Neo and the other has a PN6 SLI motherboard.
I am having issues in that the OS seems to install properly but after a few days the users gets on hd type problems.
One users workstation the hard drive would not boot. Tried everything to get it to work from F8 but it would get stuck in the window flash screen with the bottom moving accross the screen.
The other just kept giving the user disk type errors with blue screens.
I since have replaced P965 mobos hd with a pata. Its only been running for a day not sure if that solved it.
The other machine I put the drive into another machine I was building and it found errors and fixed them and booted up. This same hd would not work at all in the prior system so I am RMAing that board. Even a PATA would not finish xp installation with that MOBO.
I am not sure but I have a feeling that the SATA cables may be the cause of this type of problem. These are SATA2 drives. I tend to think you have to use better quality drive cables when using these.
Those things are so flimsy as they are. I think some cables are better then others. Whos the idiot that designed those things?
MSI only gives you one sata cable. My dvd uses one as well.
Has anyone else had issues using the newer faster drives?
I build a lot of machines but have only been building SATA drives for the past 6 months. These are the first to use this seagate 16 mb drive. When SATA first came out I had these types of issues so avoided using them for over a year. Now I would like to continue using them. But these cables appear to have connection issues.

Its happening to two different computers with 2 alike drives. I have 2 other drives not even opened yet. It does appear to be a cable issue however, I don't think I will take the chance and keep the 2 unopened drives as that would be even more risky. I am already stuck with 2.
These drives seem to be very fast at least. But those cheap sata cables are not too comforting.

JDeveloper problem setting up a database connection

I am having some problem setting up a connection to my database. Before I say any more let me explain what I need. I need 2 database connections 1 to a 10g R3 database and one to an 8.0.5.
I do realize that JDeveloper will only connect back to 8.1.7 because of the JDBC version that is installed with it.
What I really need to know is "Is it possible to define and use 2 different versions of JDBC" I really don't want to move back to the version that works with both because I am afraid of what performance/benefits I will lose from the latest and greatest.
The latest version that I can determine will work with 8.0.5 is the last version for 9i.
Any Ideas would be helpful.
The reason for this situation is that I have a production database that I will have to keep up with until the full version of the system is complete so that is why I even care about 8.0.5.
Thanks alot for your time,
Thom

I have a similar problem and I would much appreciate any help in this matter.
I have a wireless network set at home with two computers connected to it:
My workstation called Home-ws and my laptop called Acer. I can access the d:\ drive of my workstation from my laptop without any problem.
On my workstation I installed the Oracle 10g product and on my laptop I installed Oracle SQL Developer. On SQL developer I am trying to create a connection to the Oracle server:
My settings are as below:
Connection name: orcl_system
User name: system
Password: ******
Host name: Home-ws
Port: 1521
SID: orcl
When I push test I am getting the following error message:
Status: Failure –Io exception: The Network Adapter could not establish the connection
Are there any special settings that should be made set up a wireless connection to my database?
Then I did the following things below:
1. I downloaded from oracle.com the instantclient-basic-win32-10.2.0.2-20060508.zip file and unzipped it in a folder called instantclient_10_2. There were a number of DLL and two jar files plus sqlplus.exe
2. I started sqlplus from that server
3. sqlplus failed with a similar error as sql developer.
4. I checked for tnsping. There is no tnsping such and exe on my laptop. I looks like I have to install the DLLs I downloaded them but there are no instructions about how to install them. Should I just copy them in system32 folder?
5. I looked for firewalls on my Home-ws workstation (where my oracle server is installed) and on my Acer laptop. The firewalls were activated. I added on exception called oracle for port 1521 on both computers and tried to connect again. I tried with both TCP and UDP options and it did not work in both cases.
I am out of ideas. Any help would be much appreciated.
Thank you in advance for your help.
Julian

10.4.6 update authentication problem

As I have read there are several who have had AFP problems after the 10.4.6 update. I was unable to access or start AFP after the update nor am I able to login over remote desktop. I tried removing my sharepoints as per the helpful suggestions but when removing my sharepoint which formerly hosted my user folders it asks me to authenticated to LDAPv3/127.0.0.1 as a domain administrator. I tried this to no avail using the proper name and password (I know becase WGM let me in just fine). I decided to demote to standalone using the dropdown in Server Admin then would remove the share but it is still asking me to authenticate. Luckily this is a test server and only had 3 accounts on it but can someone point me in the right direction?
To recap: AFP will not start or restart, Remote Desktop access gives me an authentication error with working pw, and I cannot remove a sharepoint from a non-existent directory

Turns out it was bad ram causing some of the trouble and trying to fix it only caused more of a mess.

AFP Disconnects

Hi,
I've connected my Macbook Pro to my apple TV via AFP, problem is AFP disconnects all the time. I can listen to 2 or 3 songs disconnect or watch 10 minutes of a movie and it disconnects.
Anyone came across this before and could offer me some assitance?
Thanks

How do you create the AFP connection?

Problem with login to Sharepoint

Hello,
I wonder if someone here could provide me some advise regarding the issue we have regarding sharepoint login.
Our user is trying to login to sharepoint site: https://onepoyry-my.sharepoint.com
Prior to this site, there is Microsoft login required (https://login.microsoftonline.com/login.srf?wa=wsignin1%2E0&rpsnv=4&ct=1429261257&rver=6%2E1%2E6206%2E0&wp=MBI&wreply=https%3A%2F%2Fonepoyry-my%2Esharepoint%2Ecom%2F_forms%2Fdefault%2Easpx%3Fapr%3D1%26loginasanotheruser%3Dtrue&lc=1029&id=500046)
After the login, user get following error, probably generated by sharepoint site:
That didn't work
External sharing is disabled for https://onepoyry-my.sharepoint.com
Issue type: Guest user is signing-in but external sharing is disabled
This problem occurs in our organization computers. User says the error does not occur when using private machine.
Thus we suspect some settings on our computers might be preventing correct access to https://onepoyry-my.sharepoint.com
Please, do you have any recommendation for us in this matter? Thank you in advance!

Thank you Anil for the hint. We will try to put focus on customers GPO to see whether the problem is there.
My initial understanding was that the error message comes from the sharepoint site itself, so I thought that it is sharepoint site admin who needs to change some settings to allow that "external sharing"
But I could not reach the site admin, furthermore customer says it works on private computers, so I started to think that the problem is with the workstations not with the sharepoint site.. So will look into that GPO as you suggested now

AFP problem in 10.3 workstation

Similar Messages

Maybe you are looking for