AFP stopped working!

Running an old macbook pro 10.5.8
I've been connecting to my work server (locally) via afp for 6 months... now it stopped working! took it on a business trip, used their internet, but did not change a thing! (still connecting DHCP). Using the same wire to connect (not wifi), my internet works, I can connect to the filemaker server... I've restarted and shut down several times.
The "connect to server" window pops up, I can enter in the appropriate IP and then it just hangs on "connecting to server"
After fifteen minutes I "cancel" and about 5 mins after that I get the login screen (I then log in and nothing happens).
It's not just this server! I can "see" other work computers and the exact same thing happens when connecting to those shared computers, so I know it's this macbook.
No software updates pending. Fixed permissions on the drive. No other drives connected.
Thank you in advance for the suggestions!!!!!

Hi,  in the old account, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Similar Messages

  • AFP stopped working on AEBS 2009-more...

    Hello,
    i have an Early 2009 AEBS which is updated on 7.4.2.
    I have wired connected a synology ds209+ which used for time machine and vault for itunes and iphoto. AFP enabled on both. Finder showed 2 disks, 1 TM and 1 (AFP).
    All of a sudden started to have problems of disconnection on file transfers.
    Eventually AFP disk dissapeared from finder, and TM disk when selected stalls finder.
    A look on Airport utility shows that nothing is connected on ethernet ports.
    But the DS209 works ok, it has IP and i can connect it through FTP, WebStation.
    Lights on AEBS are normal, green on front, ON at ethernet port.
    Also itunes finds the shared library but cannot transfer songs.
    I'm puzzled !!! any ideas ???
    Thanks

    Hi,  in the old account, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Users' AFP Passwords just stop working

    I have a new 10.5 server installed on a Mac Mini...
    Standard Config installed fine, I added some users and created some share points.
    Everything works fine for a while--then all of a sudden, my client computers are getting "access denied" trying to connect via AFP. Or more accurately, it says the username/password is incorrect. I tried rebooting the server, resetting the password, etc, but to no avail. And of course, nothing was changed to make this happen.
    I even did a fresh install, and same story--works fine at first, then just "stops working".
    I'm pretty sure I've uncovered a strange bug, just wanted to throw it out there to see if others had experienced it as well.
    Thanks.

    I am having the same issue. I wiped the old volume and installed 10.5 Server, updated to 10.5.1, imported my users and set up my share points.
    I went to log in a test user, and the server responded that the login was incorrect. I changed the password, no dice. Rebooted both the server and the client, and I was able to log in correctly and test the share points.
    A few minutes later, I attempted to re-authenticate, and got the same error. Your username or password are incorrect.....
    In my case, rebooting the XServe seems to clear it up, but only temporarily. Any thoughts that anyone might have would be very much appreciated.

  • Upgrade 10.3 to 10.4: Kerberos authentication stopped working

    Hello:
    I upgraded a G5 XServe from 10.3.9 to 10.4. It almost worked - ie: system booted again, all disks are visible, etc. But, trying to log on with a user in the OD hosted on that machine has stopped working... this happens when I try to mount a shared AFP volume, and also when logging on from a 10.4.8 client bound in Directory Access to that server. Logging on under the admin account at the console (over ARD in this case), or via ssh, works fine. I didn't think to try other accounts via that method, I will do this tomorrow morning local time and post a followup.
    Upon connecting to the server with Server Admin, a message told me that there were new services which needed kerberizing, and to go to Open Directory and click 'settings'. I did this, and also looked at the overview: netinfod was in local-only mode, while all the others were marked as "Running" (lookupd, slapd, Password Server, Kerberos). In the old 10.3.9 system (ie: where user authentication is working OK), all are marked as "Running".
    I clicked the "Kerberize" button, and entered a directory admin username and password as instructed. I think the process completed (unfortunately I didn't get a screenshot). Now, the kerberize button is gone.
    At various times when admin passwords were requested, I have to try several; the expected ones didn't always work. Eg: I thought the "diradmin" account was needed in one dialog, but I used the system "admin" account instead. (Sorry, didn't record proper details of those events).
    Forward and reverse DNS lookups with the host command work ok - they return the expected IP address.
    I looked through a bunch of logs (/var/log/*.log, /Library/Logs/.../*.log), and found a few lines with possible clues... these are shown further down.
    I have now tried updating to 10.4.8 (I'm not sure if I should have done it before kerberos was going again, but getting the system up to date does seem prudent). Errors are all exactly the same.
    Any hints or suggestions much appreciated! Here's some promising things I've found, which I'll be studying today. I hope to take the server down tomorrow morning again to try this stuff out...
    http://lists.apple.com/archives/macos-x-server/2006/Feb/msg01152.html
    http://lists.apple.com/archives/Client-management/2006/Sep/msg00013.html
    Thanks,
    Ralph
    /var/log/system.log:
    Mar 10 15:18:37 tararuas krb5kdc[84]: no sockets set up?
    AppleFileServiceAccess.log:
    IP 130.195.240.52 - - [10/Mar/2007:15:15:15 1200] "Logout test333" -5023 0 0
    IP 130.195.240.52 - - [10/Mar/2007:15:24:30 1200] "Logout ralphwahrlich" -5023 0 0
    FWIW, the AFP Reference gives error -5023 meaning thus: "UAM failed (the specified old password doesn’t match); no user is logged in yet for the specified session; authentication failed; password is incorrect."
    From slapconfig.log (slightly edited for brevity):
    slapconfig.log:
    2007-03-10 14:51:52 +1300 - slapconfig -migrateldapserver
    2007-03-10 14:51:52 +1300 - 1 Removing LDAP server from search policy
    2007-03-10 14:51:52 +1300 - 2 Data export
    2007-03-10 14:51:52 +1300 - command: /usr/sbin/oldslapcat -c -l /var/db/openldap/migration/backup.ldif
    2007-03-10 14:51:53 +1300 - Removed file at path /var/db/openldap/openldap-data/__db.001.
    2007-03-10 14:51:53 +1300 - Removed file at path /var/db/openldap/openldap-slurp/replication.log.lock.
    2007-03-10 14:51:53 +1300 - command: /usr/sbin/NeST -pwsrekey
    2007-03-10 14:51:55 +1300 - NeST command output:
    nothing found to load
    2007-03-10 14:51:55 +1300 - 3 Data import
    2007-03-10 14:51:55 +1300 - command: /usr/sbin/slapadd -c -l /tmp/backup11774.ldif
    2007-03-10 14:51:58 +1300 - 4 Updating LDAP configuration
    2007-03-10 14:51:59 +1300 - Starting LDAP server (slapd)
    2007-03-10 14:52:22 +1300 - 5 Updating data in LDAP
    2007-03-10 14:52:22 +1300 - command: /usr/bin/ldapdelete -c -x -H ldapi://%2Fvar%2Frun%2Fldapi cn=ldapreplicas,cn=config,dc=geo,dc=vuw,dc=ac,dc=nz cn=passwordserver,cn=config,dc=geo,dc=vuw,dc=ac,dc=nz cn=passwordserver_4AB32E0671171DC872A9D40CC42F9E07,cn=config,dc=geo,dc=vuw,dc=a c,dc=nz
    2007-03-10 14:52:22 +1300 - ldapdelete command output:
    ldap_bind: Can't contact LDAP server (-1)
    2007-03-10 14:52:22 +1300 - ldapdelete command failed with status 1
    2007-03-10 14:52:22 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
    2007-03-10 15:03:55 +1300 - slapconfig -setmacosxodpolicy
    2007-03-10 15:03:55 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
    2007-03-10 15:03:55 +1300 - ldapadd command output:
    ldap_modify: No such object (32)
    matched DN: cn=config,dc=geo,dc=vuw,dc=ac,dc=nz
    2007-03-10 15:03:55 +1300 - ldapadd command failed with status 32
    2007-03-10 15:04:13 +1300 - slapconfig -kerberize
    2007-03-10 15:04:13 +1300 - Error: Incorrect username or password. You must enter a directory domain administrator username and password.
    2007-03-10 15:05:25 +1300 - slapconfig -setmacosxodpolicy
    2007-03-10 15:05:25 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
    2007-03-10 15:05:25 +1300 - ldapadd command output:
    ldap_modify: No such object (32)
    matched DN: cn=config,dc=geo,dc=vuw,dc=ac,dc=nz
    2007-03-10 15:05:25 +1300 - ldapadd command failed with status 32
    2007-03-10 15:05:38 +1300 - slapconfig -kerberize
    2007-03-10 15:05:38 +1300 - Error: Incorrect username or password. You must enter a directory domain administrator username and password.
    2007-03-10 15:05:44 +1300 - slapconfig -kerberize
    2007-03-10 15:05:45 +1300 - Removed directory at path /var/db/krb5kdc.
    2007-03-10 15:05:45 +1300 - command: /sbin/kerberosautoconfig -r GEO.VUW.AC.NZ -m tararuas.geo.vuw.ac.nz -u -v 1
    2007-03-10 15:05:45 +1300 - kerberosautoconfig command failed with exception launch path not accessible
    2007-03-10 15:05:45 +1300 - command: /usr/sbin/kdcsetup -f /LDAPv3/127.0.0.1 -w -a admin -p ** -v 1 GEO.VUW.AC.NZ
    2007-03-10 15:05:47 +1300 - kdcsetup command output:
    Contacting the Directory Server
    Authenticating to the Directory Server
    Creating Kerberos directory
    Creating KDC Config File
    Creating Admin ACL File
    Creating Kerberos Master Key
    Creating Kerberos Database
    Creating Kerberos Admin user
    WARNING: no policy specified for [email protected]; defaulting to no policy
    Adding kerberos auth authority to admin user
    Creating keytab for the admin tools
    Adding KDC & kadmind to launchd
    Adding the new KDC into the KerberosClient config record
    AddKDCToConfig: KDC is already present in record
    Finished
    2007-03-10 15:05:47 +1300 - command: /usr/sbin/mkpassdb -kerberize
    Mac Mini G4 1.25GHz   Mac OS X (10.4.8)  

    Thanks heaps for your reply
    Yes, I did indeed use CDs.
    I followed the instructions at http://docs.info.apple.com/article.html?artnum=301909-en , but struck problems...
    Step 16:
    here's what I got after pressing CTRL-D:
    ldap_add: Server is unwilling to perform (53)
    additional info: no global superior knowledge
    I thought I'd press ahead anyway... and struck the next problem:
    Step 18:
    here's what I got when attempting to add a record in /AccessControls.. a dialog box that said this:
    Record type not mapped
    The record with type "AccessControls" is not mapped. Your should report this error to the administrator of your directory server.
    I found the following:
    http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c7od31.html
    step 8 on that page, bullet point starting with "To add a mapping for a record type ..." seems what I want, but have no idea which object class name to use.
    Not sure where to go next. I'm somewhat inclined to blow away the OD database, and rebuild it from a backup. I would do this...
    On the 10.3.9 system:
    - export the OD from WGM
    Go into 10.4.8, and:
    - in Server Admin, change OD to be standalone only
    - reboot
    - go back to Server Admin, change OD to be a OD master
    - import the records exported from the 10.3.9 system
    I will post another update tommorrow.

  • FTP has mysteriously stopped working

    For some reason, FTP has suddenly stopped working on my MacBook Pro. I've tried with Cyberduck, Firefox and Camino. I've tried rebooting, and I've tried restarting the modem and router (a Time Capsule).
    I know there's nothing wrong with the remote server, *because I can use FTP fine on my MacBook on the same wifi network.*
    With Firefox I get the error:
    +426 Transfer aborted. Data connection closed.+
    With Cyberduck I get the error:
    +Read timed out.+
    The full log for Cyberduck is:
    +220 ProFTPD 1.3.0a Server ready.+
    +USER tester+
    +331 Password required for tester.+
    +PASS ******+
    +230 User tester logged in.+
    FEAT
    211-Features:
    MDTM
    +REST STREAM+
    SIZE
    +AUTH TLS+
    PBSZ
    PROT
    +211 End+
    +CWD /+
    +250 CWD command successful+
    +TYPE I+
    +200 Type set to I+
    PASV
    +227 Entering Passive Mode (209,240,132,53,7,89).+
    +RETR FILE.zip+
    +150 Opening BINARY mode data connection for FILE.zip (36911497 bytes)+
    QUIT
    +220 ProFTPD 1.3.0a Server ready.+
    +USER tester+
    +331 Password required for tester.+
    +PASS ******+
    +230 User tester logged in.+
    FEAT
    211-Features:
    MDTM
    +REST STREAM+
    SIZE
    +AUTH TLS+
    PBSZ
    PROT
    +211 End+
    +CWD /+
    +250 CWD command successful+
    +TYPE I+
    +200 Type set to I+
    PASV
    +227 Entering Passive Mode (209,240,132,53,9,234).+
    +RETR FILE.zip+
    +150 Opening BINARY mode data connection for FILE.zip (36911497 bytes)+
    QUIT

    This might be way off base but today I couldn't connect between my MacPro and my MacBook over my wireless home network. I checked under sharing on the MacBook and for some reason the AFP option under file sharing was off. I didn't turn it off. I assume SL helpfully did it for me. I've noticed a few weird things like that happening. There's an FTP option in the same area. Maybe check that out.

  • Samba stopped working again after most recent security update

    This is not the first time that Samba has stopped working for me after applying an update to Mac OS X.
    I installed an update that 'Software Update' offered to me a day or two ago, and it has caused Samba to stop working again. I can't access the disks on my Powermac from any of my PCs (WinXP and Vista) again.
    I tried turning the firewall off. I tried turning SMB file sharing off and turning it back on. I tried disabling and enabling each of the users for SMB access. Still doesn't work.
    Under 'Sharing', I have 'File Sharing' enabled. Under its 'Options', I have 'Share files and folders using AFP' and 'Share files and folders using SMB' both enabled. I have my account enabled under 'Share files and folders using SMB'. I also tried disabling it and enabling it. Under Network setup, I have location 'Home' selected, because of previous problems with Samba not working if 'Automatic' was selected.
    Ideas?
    Thanks,
    Chris Shaker

    Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
    I managed to solve the stickies and TextEdit issues by removing Butler in the end.

  • Itunes wont open and gives me a message saying "Itunes has stopped working".  What can I do to fix this?

    I use windows vista and I have upgraded my itunes.  Now when I open it, it gives me a message saying "itunes has stopped working"  and then gives me a message saying it will notify me for a solution.  What can I do to fix this so it can open and not give me any more problems???

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • Since I installed a printer software Satellite L300 has stopped working

    Hello there!
    I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
    OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
    Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
    when i load it up it goes to Windows error recovery:
    'windows has failed to start.a recent hardware or software change might be the cause
    if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
    then it gives two options: Launch startup repair (recomended)
    start windows normally
    ==========
    -so i click launch startup repair (reccomended)
    -then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
    if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
    but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
    ========
    5 years ago Report Abuse
    Additional Details
    so i just click 'next'
    ========
    then i have 5 options:
    -startup repair
    -system restore
    -windows complete pc restore
    -windows memory diagnostic tool
    -command prompt
    ==========
    startup repair says it cannot manually fix any problems
    -system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
    -windows comple pc restore says i need to insert a backup disk which I dont have
    windows memory diagnostics tool says that windows is preventing this
    ============
    but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
    but i don't know where...i typed it in the command prompt but don't understand how to use it
    =========
    i also tried to click start windows normally but it won't work

    If the problem is installed software, start notebook in safe mode and try to start system restore from there.
    Please let me know which options are available. Can you roll back OS few days back?
    Are some restore points listed there?

  • Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

    AdapterDeviceID: 0x9712
    AdapterDriverVersion: 8.861.1.2000
    AdapterSubsysID: 164c103c
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
    AvailablePageFile: 13967405056
    AvailablePhysicalMemory: 6222434304
    AvailableVirtualMemory: 3783245824
    BIOS_Manufacturer: Hewlett-Packard
    BlockedDllList:
    BreakpadReserveAddress: 46661632
    BreakpadReserveSize: 41943040
    BuildID: 20141113143407
    CrashTime: 1417153956
    EMCheckCompatibility: true
    EventLoopNestingLevel: 1
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1416895140
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
    D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 175
    StartupTime: 1417153798
    SystemMemoryUsePercentage: 25
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 16630353920
    TotalPhysicalMemory: 8316153856
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
    Vendor: Mozilla
    Version: 33.1.1
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.
    AND:
    A plugin container for firefox has stopped working.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 33.1.1.5430
    Application Timestamp: 54656826
    Fault Module Name: mozalloc.dll
    Fault Module Version: 33.1.1.5430
    Fault Module Timestamp: 54654321
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7.  Message shows that iTunes has stopped working.  This happens every time.  I have updated iTunes Software.  Will not solve the problem.  What is wrong

    I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded.  When I click on the iTunes Store Box, Nothing happens except for a message that reads:
              iTunes has stopped working.
    The following items give me a choice, but no answer comes up.  The computer will shut down the website.
              "Check online for a solution and close the program"
              "Close the program."
    There is an item below the box that is selectable for View problem details.  When clicked a long list of items show up.  I have listed some of the problems as written, but I do not understand them.  I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version.  How can we go back and download an earlier version of iTunes?
         Here are some of the Problem Details:
         "Problem signature:  APPCRASH
         Application Name:     iTunes.exe
         Application Version:  11.0.1.12
         Application Timestamp:  50c8fc7e"

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • Can't get itunes.  I get the following message when I click on either the shortcut or the program.  It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

    When I click on the itunes shortcut or the program  I get the following message:
    ITunes has stopped working.  My two options are:  Windows can check on line for a solution to the problem or close the program. 
    It seems that my entire library is not there.  If I sync my ipod will it add it back into my library on the computer? 
    I've even tried installing again and nothing works.  Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
    Thanks

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Remove the extensions, redownload Safari, reload the extensions.
    http://www.apple.com/safari/download/
    And if you really want a better experience, use Firefox, tons more choices and possibilities there.
    Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
    https://addons.mozilla.org/en-US/firefox/addon/noscript/
    Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

  • ITunes 10.3.1 has stopped working in Windows 7 64bit

    I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit.  My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working.  I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work. 
    This is the information I have on the Problem Details:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.3.1.55
    Application Timestamp: 4deec351
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00000000
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

    Try copying the QTMovieWin.dll in the  c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

Maybe you are looking for

  • Suppressing Applet alerts when using java mail api

    Hi, Im using the following code to send email from my application. Im using JSF (tomahawk), Spring and hibernate in my application. I'm using spring email API classes to send email. This code works perfectly fine in the sense its parsing template and

  • Can I make the finder open my most recently used folder when opening a new window?

    Hello Community! When I open a new finder window I would like it to open the folder I worked in last (i.e. the one I saved sth to or opened sth from). I know I can go over "Go to" but is there a way to adjust the settings so that it opens automatical

  • Problem with setMaximumSize [JToggleButton]

    Hi to all. I have a little problem when I set Size of JToggleButton. I have a panel that is in a JSplitPane. This panel has GridLayout because I put into many JToggleButtons. I set PreferredSize, MinimumSize and MaximumSize. When application starts P

  • Already registered iCloud email address

    Hello, When I try to create an iCloud email address on my iPhone, it says it's already being used. But If I send an email to that address, I get a "Delivery Status Notification (Failure)" with the message "The error that the other server returned was

  • Creatednew event and put it in SWEC

    Hi, I created a new event for buss obj BUS2081 by extending it. I put this in SWEC and put the radio button on 'on create' but the event did not occur while creating the document but it occured while changing the document further i checked in SWED an