Afptcpd will not start - status unused !

Hello!
I have just migrated my Data-Volumes to an OES2 SP3 Server.
Installing and configuring afp was working fine, but I am not able to startup the afptcpd.
I get this messeages in the log-file:
Jul 19 13:40:37 fssci openwbem: [1174452544]CMPI provider ifc: Library AFPServicesProvider should contain AFPServicesProvider_Create_InstanceMI
Jul 19 13:40:39 fssci openwbem: [1140881728]CMPI provider ifc: Library AFPConfigProvider should contain AFPConfigProvider_Create_InstanceMI
Jul 19 13:40:39 fssci openwbem: [1132489024]CMPI provider ifc: Library AFPVolumeProvider should contain AFPVolumeProvider_Create_InstanceMI
Jul 19 13:40:39 fssci openwbem: [1115703616]CMPI provider ifc: Library AFPContextProvider should contain AFPContextProvider_Create_InstanceMI
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has Diffie-Hellman exchange method set as UAM
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has maximum number of threads set to 32
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has max reconnect period set to 1440 minutes
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has support for ALL AFP versions (2.2, 3.0, 3.1) set
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has sharing-from-mac set to 'no'
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has all log set
Jul 19 13:47:36 fssci afptcpd[27569]: Setting Guest user name as - guest
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has AUDIT disabled
Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has export all volumes enabled
Jul 19 13:47:36 fssci afptcpd[27582]: [error] PID file does not exist [No such file or directory]
Jul 19 13:47:36 fssci afptcpd[27582]: PID [27582] file created successfully
Jul 19 13:47:36 fssci afptcpd[27582]: Core dump limit - unlimited
Jul 19 13:47:36 fssci afptcpd[27582]: MALLOC_CHECK_ value - 2
Jul 19 13:47:36 fssci afptcpd[27582]: Maximum open files - 50000
Jul 19 13:47:36 fssci afptcpd[27582]: [debug] GetLocaleFromConfigFile: Failed to get RC_LC_ALL configuration parameter value. Error - -1
Jul 19 13:47:36 fssci [NCPL]: Failed to initialize NetWare Cross Platform Client Library. Error - 4294967295 <0xffffffff>
Jul 19 13:47:36 fssci [NCPL]: [status] **** Entered AFPCleanup ****
Jul 19 13:47:36 fssci [NCPL]: [status] PID file removed successfully
Jul 19 13:47:36 fssci [NCPL]: [debug] Begin cleanup_bonjour
Jul 19 13:47:36 fssci [NCPL]: [debug] Finish cleanup_bonjour
Jul 19 13:47:36 fssci [NCPL]: [status] AFP Rebuilder thread Halted
Jul 19 13:47:36 fssci [NCPL]: [status] **** Exiting AFPCleanup ****
I have tried to stop avahi-daemon but this did not help anyway.
So do you have any idea how to fix this. What is the ploblem here????
Thanks ahead
Chris

On 19/07/2011 13:06, tiredsum wrote:
> I have just migrated my Data-Volumes to an OES2 SP3 Server.
> Installing and configuring afp was working fine, but I am not able to
> startup the afptcpd.
>
> I get this messeages in the log-file:
>
> -Jul 19 13:40:37 fssci openwbem: [1174452544]CMPI provider ifc: Library
> AFPServicesProvider should contain
> AFPServicesProvider_Create_InstanceMI
> Jul 19 13:40:39 fssci openwbem: [1140881728]CMPI provider ifc: Library
> AFPConfigProvider should contain AFPConfigProvider_Create_InstanceMI
> Jul 19 13:40:39 fssci openwbem: [1132489024]CMPI provider ifc: Library
> AFPVolumeProvider should contain AFPVolumeProvider_Create_InstanceMI
> Jul 19 13:40:39 fssci openwbem: [1115703616]CMPI provider ifc: Library
> AFPContextProvider should contain AFPContextProvider_Create_InstanceMI
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has
> Diffie-Hellman exchange method set as UAM
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has maximum
> number of threads set to 32
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has max
> reconnect period set to 1440 minutes
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has support
> for ALL AFP versions (2.2, 3.0, 3.1) set
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has
> sharing-from-mac set to 'no'
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has all log
> set
> Jul 19 13:47:36 fssci afptcpd[27569]: Setting Guest user name as -
> guest
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has AUDIT
> disabled
> Jul 19 13:47:36 fssci afptcpd[27569]: Configuration file has export all
> volumes enabled
> Jul 19 13:47:36 fssci afptcpd[27582]: [error] PID file does not exist
> [No such file or directory]
> Jul 19 13:47:36 fssci afptcpd[27582]: PID [27582] file created
> successfully
> Jul 19 13:47:36 fssci afptcpd[27582]: Core dump limit - unlimited
> Jul 19 13:47:36 fssci afptcpd[27582]: MALLOC_CHECK_ value - 2
> Jul 19 13:47:36 fssci afptcpd[27582]: Maximum open files - 50000
> Jul 19 13:47:36 fssci afptcpd[27582]: [debug] GetLocaleFromConfigFile:
> Failed to get RC_LC_ALL configuration parameter value. Error - -1
> Jul 19 13:47:36 fssci [NCPL]: Failed to initialize NetWare Cross
> Platform Client Library. Error - 4294967295<0xffffffff>
> Jul 19 13:47:36 fssci [NCPL]: [status] **** Entered AFPCleanup ****
> Jul 19 13:47:36 fssci [NCPL]: [status] PID file removed successfully
> Jul 19 13:47:36 fssci [NCPL]: [debug] Begin cleanup_bonjour
> Jul 19 13:47:36 fssci [NCPL]: [debug] Finish cleanup_bonjour
> Jul 19 13:47:36 fssci [NCPL]: [status] AFP Rebuilder thread Halted
> Jul 19 13:47:36 fssci [NCPL]: [status] **** Exiting AFPCleanup ****-
>
> I have tried to stop avahi-daemon but this did not help anyway.
> So do you have any idea how to fix this. What is the ploblem here????
I think the line of interest from the above output is:
Jul 19 13:47:36 fssci [NCPL]: Failed to initialize NetWare Cross
Platform Client Library. Error - 4294967295 <0xffffffff>
What does "rpm -q novell-xplatlib" return?
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Similar Messages

Firefox will not start and profile manager will not start

This has happened on two accounts on my laptop. I am running windows 7, 64 bit and firefox 18.0. Firefox had been running on this machine for several years without incident, but suddenly when I try to start firefox, it will not start. The little wait icon spins for about a second then disappears without starting firefox. Other browser will start and run. I reboot and when I click on the icon to start firefox nothing happens. I tried to start the profile manager as seen in the knowledge base, but nothing starts either. I switched to another account on this computer and firefox started and ran for about a week, until today where it just stopped working. I have not tried to reinstall firefox as the message boards say this will not help. Any ideas?

Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

Sql server will not start - Database 'model' cannot be opened. It is in the middle of a restore.

Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s      SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s      Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s      The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server      A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s      Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s     Starting up database 'model'.
2009-08-13 14:15:44.32 Server      Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server      Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server      Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server      Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server      Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server      Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s     Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
                                                 status
master
                                                       65544
tempdb
                                                       65544
model
                                                       65568
msdb
                                                  1073807368
SS_DBA_Dashboard
                                                  1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!

I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server      Error: 17058, Severity: 16, State: 1.
Server      initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server      (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server      All rights reserved.
2011-03-29 16:50:49.40 Server      Server process ID is 7292.
2011-03-29 16:50:49.40 Server      System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server      Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server      Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server      This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server      Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server      Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server      Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s      Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s      CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s      SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s      Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s     Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s      Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server      The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server      Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server      Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server      Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s     Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s     Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server      Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Mac crash; recovery will not start

Yesterday my Mac suddenly crashed into a screen with blue (and white) lines. It wouldn't respond to anything, so I powered it down and tried to boot again. However, it will not boot. It will show the Apple logo, request my password and after a while (with the Apple logo and the spinning wheel) it just shows a blank screen (grey), while the CPU fans are spinning like crazy.Sometimes will it not even get this far and stop doing anything before requesting the password. The guest mode has the same problem.
I basically tried everything to fix it; the recovery option will also show the blank grey screen but nothing else (even after 30 minutes); the internet recovery downloads fine and then pulls the same stunt, so even the recovery will not work. I've tried save mode, which cannot start up (Filevault is activated) and seems to end mid-way through. Sometimes the safe mode crashes immediately after the boot starts with a kernel panic (/sbin/launchd failed, errno 2); after resetting the NVRAM it won't panic.
I've checked the hardware (T startup option, full check), which al seems to be OK. SMART status from the harddrive looks OK (checked with DiskWarrior). Starting in single user mode sometimes gets me through the password request screen and allows me to check the hard drive (fsck -fy). This seems to change permissions, however, after a reboot or exit command, the problem persists and starting up in single user mode and performing the fsck -fy command again seems to fix some issues. When I enter the exit command in safe mode, it'll start up fine, but when the graphic user interface starts, it'll give me the grey screen again (so a blank screen, while the CPU fans are at full power).
Does anyone have any idea what I can do to fix this? Since even the recovery will not start (and neither will the internet recovery), I've got no clue what to do to fix this issue...

Your comment about the "blue and white lines" has me wondering. You say you have a fairly recent MacBook Pro, correct? If that is the case, you probably have a model which has both discrete and integrated GPUs. It is possible that your discrete GPU has failed, and whenever the OS is trying to switch to it is when your system just "hangs" (because the GPU has failed). It all works properly as long as it is on the integrated GPU, but when something causes it to switch it hits the bad GPU and locks.
I would suggest that you make an appointment at your nearest Apple Store to have the specialists at the Genius Bar take a look at it for you. If you are still under the 1 year warranty (or extended Apple Care if you purchased it) then any needed hardware repairs would be free, unless it is due to accidental damage such as a spill in the keyboard, etc.
If you don't have access to an Authorized Apple Service Center, and you do have access to another Mac, you could try making an external boot drive on the other Mac, then install the app "gfxCardStatus" on that MacOS instance (when booted from the external drive). While still booted from the external drive, use the gfxCardStatus app to force the Mac to only use the integrated GPU then shutdown and boot your "dead" Mac from that drive. If it boots and runs, now, try to change the external drive to force to use only the discrete GPU then see how your system boots. If your system, will fully boot using one or the other, then it seems that your problem is probably related to one of your GPUs. It could be a hardware failure, or it could be a corrupted driver. If your system won't boot from either GPU, then my guess about it being a GPU issue is probably wrong.

I Mac with 10.6.4 will not start dial keeps spinning?

I Mac 20" with 10.6.4 will not start dial below apple keeps spinning?

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

CSRadius service will not start

ACS 4.0 and Windows 2003 server.
The CSRadius service will not start automaticly, and after a reboot we have to start the service manually.
The evenlogs says this:
EventID:7000 Source: Service Control Manager.
The Open Procedure for service "CSRadius" in DLL "C:\Program Files\CiscoSecure ACS v4.0\bin\rad_mon.dll" failed. Performance data for this service will not be available. The Status code returned is the first DWORD in the attached data.
And then this one:
"The CSRadius service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion. "
Any suggestions ?
JF

Please read details about this bug,
If services start successfully manually, but not automatically.
CSCsb81671 : CSTacacs and CSRadius services fail to start with Windows 2003
Workaround is to get a file from TAC, and apply it on ACS.
Regards,
Prem

Homegroup Listener Service Will Not Start

The Homegroup Listener Service on one of my machines will not start. It
shows an error code of -2147467262 (0x80004002). Does anyone know what
might be causing this?

Hi,
Please try the following steps to troubleshoot the issue.
1. Leave HomeGroup completely
a. Click the Start Button, type "cmd" (without quotation marks), in the search result list, right click on Cmd.exe and select Run as administrator.
Note: If you are prompted for an administrator password or confirmation, type your password, or click Continue.
b. In the popup window, type the following commands and press Enter one by one:
Net stop p2pimsvc
c. Access t he following folder and clear all files inside:
C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
d. Click the Start Button, type "cmd" (without quotation marks), in the search result list, right click on Cmd.exe and select Run as administrator.
Net start p2pimsvc
After that, please check whether the service can be started or not. If not, please proceed to the next steps.
2. Verify the Server service and assure the status is started.
3. Replace the system file and registry key. Please copy the following files on another Windows 7 machine which HomeGroup Listener service can start normally and import them to the problematic one.
a. Locate the ListSvc.dll file under the folder C:\Windows\System32. Remove the old one and paste the new one.
b. Navigate the following registry key on another Windows 7 machine and export it. Then, please copy and import it on the problematic machine.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HomeGroupListener
If the issue persists after performing above suggestions, I suggest you run System File Checker (SFC) to verify whether any system file is corrupted.
Thanks,
Novak

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

IBook will not start up!

My iBook will not start up all the way. It gets to the gray apple screen and just spins.(3hrs) I tried everything. It will not start up with 10.3 CD or OS9. It will start up with nortons CD but you cant see the Hard Drive. Hardware test CD starts and every thing checks out fine. What to do. I hope its not its final day.

Paul,
Do you have OS X 10.3 installed on it?
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, and repair permissions on it.
See if you are able to do a little hard drive maintenance to helps things out.
If it won't start up in Safe Mode, you can try Single User Mode and fsck, but if Safe Mode won't do it for you, fsck may not, either.
Keep Norton far, far away from any hard drive with OS X installed on it. DiskDoctor is known as DiskDoctor Kevorkian around here. It finds non-existent "errors" and sets about "correcting," them, killing your hard drive in the process.
If none of Apple's own disk repair procedures work (Safe Mode, Disk Utility from the Install disc, or fsck), it may be wise to invest in DiskWarrior. It can often find your hard drive and repair it when Apple's own utilities cannot. DiskWarrior has saved my hard drive more than once.
Good luck.

Employee replications stuck in 'Not started' status.

Some of the Employee replication has been stuck in not started status.When you go to the edit mode and click on replicate and then save, the entries will be saved. But the status of the employee replication will be in not started status instead of successful or failed status.
The reason might be discrepancy in the secondary persistence. This lead to the fact that you got records by the query which seemed to be relevant, but in the original persistence they were already marked as irrelevant. From SAP end we trigger a reload of the secondary persistence and the issue will be solved.
Thanks.
Cryssal

Do you think there is an agent logged in and Not Ready, or do you think it's a hung session?
If you think it's a real login, reboot the PC.
If you think it's a hung session then you'll have to restart a service of two. I would just plan for a maintenance window and reboot the server along with your CUCM CTI Manager.
Good luck and happy troubleshooting!
Sent from Cisco Technical Support iPhone App

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60

Let me start with information on my T60:
OS information: Microsoft Windows XP
OS version: 5.10.2600 Service Pack 2
Processor: x86 Family 6 Model 14 Stepping 8
Memory: 3.135.856 kb
BIOS version: 2.09 (79ETC9WW)
Machine type-Model: 1951A47
I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
"This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
Here is what I found on Lenovo's support site on my type & model:
PC Card
Conforms to the PC Card Standard 95
Type II slot
Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
Have a look at these screen captures.
What should I do to solve my urgent problem!?
Message Edited by pbl_ibm on 10-09-2008 05:10 AM
Message Edited by pbl_ibm on 10-09-2008 07:27 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM

garytr23 wrote:
Sounds to me like a driver configuration problem. Maybe something bad happened during driver install. I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall. Reboot the computer. Have a go at it again. Also, test your pcmcia port functionality by finding and plugging in a different card. See if that works. It might need repair.
Message Edited by garytr23 on 10-09-2008 09:41 AM
The status right now is:
The PC Card reader works on my T60
If I use a Firewire PC Card it will not start - as described above (on T60)
The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
So what does a wise man do in this situation??
Please help me as I urgently need to know how to solve this serious issue!!
Have you got an idea? Can I import the video in another way??
Message Edited by perbuch on 10-12-2008 07:55 AM

MacBook pro, will not start up- drive begins

MacBook pro, will not start up- drive begins?

OK, then try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Since you can boot into safe mode successfully, I'm assuming the problem may be with a bad third-party extension or plug-in (such as a driver for third-party hardware or a bad Flash plug-in, for example.) It can also be a problem with a bad cache or preference file. If the above doesn't help then use a utility like Lion Cache Cleaner 6.0.5, Cocktail, TinkerTool Sys..., or OnyX to clean out user, system, and font caches.

Firefox will not start. Open profile manager. Delete old profile. Create new profile. Click start firefox. Firefox starts. Close firefox. Click start, "Mozilla Firefox", FireFox DOES NOT start. Help!?

Firefox will not start.
Run profilemanager and delete old profile - create new profile - click run firefox from profile manager and firefox opens.
Close firefox and try to reopen. Will not open. Follow above procedure again and foerefox opens until closed them will not open.
== This happened ==
Every time Firefox opened
== Last week ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8

Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

Afptcpd will not start - status unused !

Similar Messages

Maybe you are looking for