AFS - SD allocation/re-allocation run

Hi,
I need help with this specific scenario.We have the AFS solution in our system.
The scenario goes something like this:
Sales Order is created. The allocation run is run, stock is allocated for the requirement. The outbound delivery is created and the TO is created automatically and picked and confirmed automatically.
In case of short pick, the items are returned to bin and the delivery quantity is reduced. As far as i understand, after the delivery quantity is reduced in the delivery, we can no longer increase it as I get the message " Delivery qty > allocated stock qty / qty will be reduced"
In some cases, the user would like to increase the quantity in the delivery, after the delivery qty was deleted by mistake. (for example reduced the quantity of a wrong schedule line)
So I am looking for a solution, how to allocate stock back to the order/specific line item after the delivery has been created. Unless I allocate stock, I am not able to increase the delivery quantity. (Note: I seen this problem occur only in AFS, where once allocation is gone, delivery quantity cannot be increased.)
I have tried experimenting with the Arun Optimizer with no success.
Any solution to this problem ? Can anyone please guide me on this ?

Hi,
Sorry about the late reply.
My email id is :
[email protected]
Thanks a lot in advance,
Rajeevan

Similar Messages

AFS ARun: sales order not been selected for the allocation run.

Hi,
I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
For this process, I have set-up an Allocation type with
1. Requirement selection that does not exclude MTO/PTO orders
2. Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
Can someone suggest what I may have missed?
Regards,
PD

Hi Pankaj, I have same exact issue. How did you fix this ?
Thanks,
Mahesh

AFS User Exit for Allocation Run Sorting

Hi Gurus,
can you please help us in order to identify which BAPI or User Exit needs to be used to perform a custom sorting on AFS Allocation Run?
My aim is to perform a specific calculation on a single field of the requirement sorting table (/AFS/SOFN_V-SOFNA) during ARun processing..
Given a specific value of this field (that will be EDATU - confirmed delivery date) I want to assign a dynamic value based on a comparison with an external table, in order to determine whether EDATU belongs to range A, B or C
Any idea?
Thanks in advance for your help
Regards, Alessio

solved with the help of SAP note.

Afs-standard report for allocation run

hi,
is there any standard report available for list of allocation run to sales order (afs).if so kindly provide the details.
regards
muthuraman.d

Hi,
Before running payroll in production , We need to validate the data what user updated in IT 2010, if any standerd report is there plz let me know
sd

SAP AFS Allocation run

Hi all,
Please help me in the issue . How to do Allocation run based on Customer Group .
Thanks in advance

You could refer to the SAP help documentation which is http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
Hope this helps
Regards
Manthan.

SAP AFS SD AFS Allocation run based on Customer group

Hi all,
Please help me in the issue . How to do Allocation run based on Customer Group .
Thanks in advance

solved

Partial allocation against sale order during allocation run

Hi Experts..
How to do allocation run for partial quantity against to the particular AFS sale order while doing allocation run process in J3AT.
Example :
I have sale order stock 10 qty. but I want to do allocation run for 5 qty. So that I can make partial delivery for this 5 qty alone. So please suggest me how to do partial allocation run.
Thanks in advance
Regds
Prabakar

Hi,
You can try TCode V.00
This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
If this is not the one that you want, then perhaps you might have to develop one.
Thanks
Mukund S

Badi or user exit for allocation run (J3AT)

hi friends,
we r using the SAP AFS in that i need to put the sales order value check for F status material while saving the allocation run. for that i need the badi or user exit where i will get the values of all the F status mateial before i save the allocation run. so that i can perform the check on sales order values.
regards,
vicky.

Hello vicky
can you please tell me the note number that solved this problem, thanks.

Allocation Run Problem

Hi Experts,
I create Quation and sales order with 10 Qnty . when I am trying to do allocation run but qnty shwoing is 0 instead of 10
Stock is also availble in the system and i also check material is not reserved by T code- /N/AFS/MD04 .
Please guide me .
Regards
Jaspreet Singh

Since you did not provide any information about which release and support package of BPC you are using I would have to guess and say you need to apply SAP note 1456024 which is included part of BPC 7.0 NW SP08.
If that note is not applicable to your system, please come back with more details on the release information. Also, does any packages show a status or is the issue only with the run_allocation package?
Can you see the status files from UJFS or from SLG1?
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Cost centers to be blocked during allocation run

Dear All,
Can some one clarify me whether i have to block Cost centers (for users) while doing the Allocation run.
Thanks and Regards,
Gokul

hello
actually your question is not very much clear and necessity for the lock or block the cost centers.
Actually when you are creating cost center master, you can lock the secondary cost postings from the other costcenters while doing the distibution or assessement, if not done at the time of creation cost center master, you can lock the secondary cost postings at any time.
regards
madhav

AFS - Allocation Run Fill rate

Hi everyone,
When executing the J3AT tcode, i need to bring in a custom fill rate that will override the global setting for the Header Minimum Quota (screen field: J_3ASIMU_S-PERCT_K) for different Sales Organizations without using the ARun "release strategy" on the customer master or assigning a "Release" rule to Sales Orders.
I have reviewed OSS note 722823, but none of the described userexits appear to provide the desired functionality. Can anyone point me towards the correct user exit please?
Thanks.
Edited by: Rob Joubert on Apr 8, 2011 6:29 PM

You could refer to the SAP help documentation which is http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
Hope this helps
Regards
Manthan.

Badi or user exit for allocation run (Tcode-J3AT) on save button

hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.

solved with the help of SAP note.

Unable to do Allocation with Reference to Sales Order For SAP AFS

Dear Experts
                  Error is showing while doing Allocation for Sales Order .
                  Our Business Scenario is ( Sales Order ( VA01)- Allocation Run(J3AT) - Delivery (VL01N) - Invoice ( VF01).
                  Yesterday a user Created a sales Order & then did Allocation & allocation was successfully saved & started doing Delivery through VL01N , he entered Order No & did picking & as he hit enter in Post Goods Issue SAP automatically closed coz backup had started & it was around 8'o clock .
And today morning he didn't change Req delivery date for doing delivery but also he De-Allocated the allocation through TC - J4AB & did de-allocation & later changed Req delivery date / refreshed Sales Order & gone through J3AT For allocation but its showing following error while doing Allocation .
Material LCM.22.1586.0 locked by user ...............
Please give any suggestion if possible.
Thx In Advance
Kamlesh

Sorry for delay.
We got the solution by Our-self .
Articles were blocked due to system shut down without any indication. And then forwarded this to BASIS Team . They unblocked the user & hence problem got solved.
Kamlesh

Question on Allocations in Oracle Projects

Hello All ,
Please let me know how to transfer amount on one task to another within the same project using Project allocations.
If there are Multiple Projects present in the system how do we map that cost from a project goes into another task on the same Project . How do we establish a one to one relationship between the source and targets in this case?
Regards
DR.
Edited by: 933993 on Nov 2, 2012 5:14 AM

Hi
You should set up an Allocation Rule for each pair of project and tasks you want to transfer costs between.
Navigate to Project Costing > Allocations > Allocation Rules.
A) On the setup form enter a name to the allocation rule, Select Basis Method as Target % and spread Evenly.
Enter the expenditure organization, exepnditure type class and expenditure type for the EI resulting in the allocation run. Save.
B) Now open the Sources form - Under the Project Sources section select the amount type (raw or total burdened cost), then enter the first line of the source - there you list the projectt and task being the source. Save.
C) Open the Targets form. On the first line enter the project number (same as above), and the task number which you want to be the receiving task. On the % column enter 100%. Save.
D) At last go to the Offset form. There you may choose the offset method and the offset transaction attributes. Save.
Dina

Material Quantity Allocation

Scenario is like that:
Currently User allocates the product quantity in legacy system on different levels such as Sales Office, Sales Group etc for the customers. Now the user wants to enter the product quantity in SAP and based upon that user want to perform the analysis on the Product quantity and the billing quantity.
Example, User allocate the product quantity 100 PC of material A for the month of november 2009. Customer uplifts the material A quantity of 20 PC in the month of november 2009. Based on the exampled scenario user wants to analyze the figures i.e. Allocated quantity of product V/s billed quantity.
How can I achieve this ????????????????????????????
Please keep in mind that User allocates the product quantity on different levels such as Sales Office, Sales Group etc. Because in sales, the employee performance or sales office performance is calculated or examined based on the Target Sales V/s Billed Sales. I hope that this will clear my question.
Regards,

Sir,
this is the case with some selected material. for others i am able to create the order properly. some times stock is of only one box but it is allocating for 2 boxes while doing allocation run. how can it be? moreover the material for which am creating the sales order is new material that means not more stock available.
Thanks

AFS - SD allocation/re-allocation run

Similar Messages

Maybe you are looking for