After 1.2.1 Firmware update cannot tether with Aperture 3 and Canon 5D Mk3

I am now unable to tether my laptop with my Canon 5D Mk3 in Aperture 3.4.4 after I updated the firware on the camera. Aperture detects the camera but the capture button is greyed out. And when I press any buttons on the camera, it says it is busy. Note: I am able to tether camera and laptop using Lightroom 4.
Using:
MacBook Pro, Mac OS 10.8.3
Aperture 3.4.4
Canon 5D Mark III, Firmware 1.2.1

photogoga wrote:
Alright, just updated to OSX 10.8.4 and to aperture 3.4.5.
Tethering with 5d Mark III is working fine again.
Miracle of miracles!!! Works for me too.
Being able to use Image Capture for controlling my 5DIII also works
photogoga...Thanks for letting us know about these changes.
Jerry

Similar Messages

  • External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

    External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
    I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
    the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
    The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
    Please help.
    Thanks

    How is the hard drive formatted?
    Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
    (The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
    If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
    In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
    You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
    What do you see?

  • Went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.

    went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.mac

    OK. Now, you say you got this alert through App Store when trying to download Mavericks or after you downloaded it and were trying to install it? Which is the correct case?
    The error you are getting may sometimes occur when the computer has already been updated, but I don't know why you would be getting this message. I can only suggest that you take it in for service to find out why this is happening.

  • PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

    I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

    krystiefrommorayfield wrote:
    I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
    installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
    You connect your iPhone to iTunes through the Sync Process...
    See Here
    Syncing with iTunes
    From Here
    http://www.apple.com/support/iphone/syncing/
    http://www.apple.com/support/iphone/

  • TS3694 I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working great.

    How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.

    I appreciate the responses, however my initial post was too vague. I apologize and will explain.  The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video.  From every location the second gen out ran the new model on 3G signal, lol.  Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less. 
    The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long  for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support!  It is definetly highly rated.

  • HT4623 After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    Hello EvanClayton,
    Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.

  • I found a remote service running after the 10.10.3 update. ps -A|grep remote.  And I had remote management turned off in prefs.

    I found a remote service running after the 10.10.3 update.
    ps -A|grep remote. 
    And I had remote management turned off in prefs.
    I force quit the process with activity monitor.
    This looks as if it could be a problem.

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • Cannot print with Cannon LBP5000 and Timecapsule

    So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule.  Due to the CAPT Driver being bi-directional.  I do not accept this as a resolution and feel that Apple cannot simply push this aside.  My reason for that is this.
    I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
    I then decided to go wireless printing.  And bought a HP 2101nw print server for £30.  I could then print wirelessly - fab!
    I then decided to upgrade my MBP to Lion.  I then could no longer print on that machine. Air still fine - pants.
    I then had to (for other support reasons) upgrade my Air to Lion, to fix something else.  I could no longer print from their either - bugger.
    After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that.  I was told to discard that wireless print server for something compatible with Lion - cheers.
    I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
    If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device.  The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
    What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion. 

    Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
          From: Sara.Forsberg <[email protected]>
    To: Verla Adams <[email protected]>
    Sent: Thursday, April 16, 2015 7:28 PM
    Subject:  all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I updated iPhoto 4 with iPhoto 5 and lost all my photos!

    I updated iPhoto 4 with iPhoto 5 and lost all my FRICKIN photos! Anyone else have this problem? If I do a search for img_ I do get about 3800 photos, so they do still seem to exist in various locations with multiple duplicates and/or photos that are different but have the same name. I know if I try moving them all to one location I'll get the message "Do you want to replace?" many many times. Any suggestions?

    Mike
    This document
    http://docs.info.apple.com/article.html?artnum=107947
    will help recover the situation.
    Regards
    TD

  • Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

    Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
    == This happened ==
    A few times a week
    == Couple of weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • I have apple tv 5.21 and 4s phone with os 6.1.3 mirroring icon doesnt show i updated my itoons with my computer and phone i restored the apple tv  settings to factory and still no mirroring option my apple tv software is 5.2.1

    I have apple tv 5.21 and 4s phone with os 6.1.3 mirroring icon doesnt show i updated my itoons with my computer and phone i restored the apple tv  settings to factory and still no mirroring option my apple tv software is 5.2.1

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I have updated my firefox with 4.0 and since than firefox blocs every site I go to it so that I have to restart my computer. What is the problem?

    I have updated my firefox with 4.0. and since that I have problems. Namely, when I open some site firefox blocks it so I have to restart my computer. I don't have those problems with Explorer. Could U help me with this, because untill now I was very satisfied with firefox and would like to use it in the future.
    With kindest regards,
    Ljiljana Stevkovic

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • HT1752 Hello, I updated my MacBook with OS X and lost all my photos (about 7 years of photos) on iphoto (now empty). Are they completely lost or is there a way I can retrieve them from my computer?

    Hello, I updated my MacBook with OS X and lost all my photos (about 7 years of photos) on iphoto (now empty). Are they completely lost or is there a way I can retrieve them from my computer?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

Maybe you are looking for

  • Show the custom popup window on clicking the people name in sharepoint people search result

    Show the custom popup window on clicking the people name in sharepoint people search result We are doing the below code to open a popup but while clicking on name link its postback the page and not opening the popup in first click but opening in seco

  • LSMW: merging of two files

    Hello! I'm stilling working on the data migration of the material master. The information, which material belongs to which the plants, is located in a separated file. The other file contains all the information about the material. For this reason I h

  • Oracle 10.2 odbc on solaris

    Is odbc on solaris is supported with gcc 3.3.2... To be specific can I link libodbc.so with an application compiled using gcc? Looking for an alternative compatible construct than the following Discussion Forums » Database » Instant Client >> develop

  • My finder window is showing an external drive that doesn't exist.

    It is empty, but I can't eject it because it says it's in use, even though I have no applications open or other drives plugged in.  Does anyone know what this is and how I can get rid of it? Thanks.

  • Reset email for Apple ID not received

    Hi there, my brother has troubles with resetting his Apple ID password for iPad. When requesting for email reset everyhing look fine, but eventually email never comes. He uses his gmail email as primary mail for Apple ID. Did someone else have same p