After 10.10.3 update I can no longer right click. Anyone else with this issue?
After updating to the latest software I am unable to right click on my magic mouse like before. Now I have to use control and click. Anyone else with this issue?
Did you check the settings in Mouse preferences?
Download and install the OS X Yosemite 10.10.3 Combo Update.
Similar Messages
-
after downloading ios 8.1.1, my apple apps no longer work. Anyone else seeing this?
It might fix corrupted apps, but now you have the Settings app freezing on you. At this point, I would close every app in the multitaski g display and then reset the iPad again in the manner in which Ralph described above.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close every app this way. If you have never done this before, it can take a few minutes to close them all if you have a bunch apps in the display.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Safari 5.0.6 repeatedly refreshing back a page - can't find anyone else with this issue.
I have already searched for this issue, and no one mentions anything quite like it. There are plenty of threads about refreshing problems, but not like the one I'm having.
For quite awhile now, the same problem has been occurring: I will be on a web page and suddenly safari will refresh and bounce back to a prior page - anything I was doing at the moment disappears (such as filling out a form, writing an email, etc) and I have to start from the beginning. Even things like what I'm typying right now could refresh and disappear at any moment - it's driving me nuts!
Has anyone else had this problem, or heard of it, and what was the recommended solution?
Thanks in advance for your help!Ok..
You can also try troubleshooting the Safari .plist (preferences)
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Quit then relaunch Safari to test. If that helped, move the .plist file to the Trash.
~ (Tilde) character represents your Home folder.
If it's not Extensions nor corrupted preferences, possibly a third party Safari addon.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues -
Installed the update. Can't get internet. Anyone else with similar problems
Can't get the wireless to work after uploading the update.
Nop am not haveing any Problems what so evere and I did a clean install of ios 6 and not a upgrade
Evere one is doing the upgrade and find out they are haveing a lot of problems. Then do a clean install from restoring. Your iPad or iPhone. -
I should note, I am using the latest version as of today, I am using the portable version, and I have a TON of addons, a list of which I can post if I have to. Any Ideas what could be causing this? I use the "Open link in a New Tab" option every single day. I don't want to have to hit some special button to do so like my current temporary workaround with tab mix plus, I miss the old method, the option is still there in the context menu, but it won't do a single thing ever :(. Also not working is "Open Link in This Tab" and "Open Link in Duplicated Tab" (Not that I ever use those ones so who give a F). "Open Links in New Tabs" Still works though, but not for single links, so its not an ideal workaround. I can't afford to simply reset the browser, my settings, my addons, everything would be gone. I could back it up with FEBE but then I would be right back where I started. :(
Guys, I should wrap this up and let you all know so this page may help those experiencing the Firebug Context Menu Glitch. It's messed up, that was one of my favourite programs :(. Now looking for a version that doesn't do that.
-
After upgrade to iphoto 11 edits take sooooo long to complete, anyone else having this problem?
Editing photos for a slide show, each photo seems to take forever to complete edit and go on to next photo. I don't
remember having this problem before the upgrade. Does anyone know what the cause could be?
ThanksAs a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.
Hello Sandylynn,
After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
People can't hear you during a phone
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.
ddmathias, I want to make sure all services are working correctly on your phone. What GPS services were you using before the update happened? What kind of issues are you having with the services? Do you get any kind of errors? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???
See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first. -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?
Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to do this, its freeware
2 restart the Mac; Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped. -
I recently updated to the newest version of Flash (17.0.0.134) and I have a MacBook Air, running OS X and I have Safari version 8.0.4. Ever since the update I can no longer select drop down menus or get Netflix to run properly. Has anyone else had this issue/know how to resolve it?
1. System Preferences > Flash Player > Advanced > Delete All
Press “Delete All” button under “Browsing Data and Settings”.
2. Install Adobe Flash Player.
System Preferences > Flash Player > Updates
Press the “Check Now” button.
http://get.adobe.com/flashplayer/
Download it and quit Safari from Safari menu in the menu bar.
Follow the prompts to install Adobe Flash Player. -
Since updating to FF 8 I can no longer use Multirow book marks, can anyone help with this issue?
Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/
Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/ -
After updating to IOS8, my iPad 2, which has both AT&T cellular and wifi, needs to be completely turned off and rebooted to get cellular service. Does anyone else have this issue ?
Hi Hi Steve Giusto,
If you are having issues with Xxx_state issue here_xxX, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
HT5137
Next, I would try restarting the iPhone -
HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
HT4137
Thanks for using Apple Support Communities.
Best,
Brett L ,
If you are having issues with your iPad not staying connected to cellular service, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPad -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPad as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
Flat File upload into Planning Book
Hi all, I want to upload the data into the Planning Book through "Upload Data" in Interactive Demand Planning. While saving data it is saving perfectly in .CSV file. While i made some changes in the Csv file and i have tried to load the data again in
-
Running OpenGL with freeglut 2.60 under Vista w/SP1 on an X200S, GLUT menus appear as solid black regions. Otherwise, the menus are fully functional. Freeglut was compiled on the X200S with Visual Studio 2008. The exact same code displays menus pro
-
MVP List #146 April 11, 2015 – April 17, 2015
The Verizon Community Forums Most Valuable Posting List is where we recognize the great work that you all, our community, continue to do each week in these forums. Even if you're not listed below, a huge THANK YOU to all of your contributions. If you
-
Using compressor for Studio Pro first then....
I wanted to get a jump on the rendering because the titles are not ready yet for the dvd and thought about using Compressor to go ahead and make the files like DSP does .Now if I do that, will DSP recompress those after importing them and will I have
-
Autonomous transaction performance
Hi, My trigger issues a ddl, so I had to do it in an autonomous transaction to avoid the problems with commits in triggers. Is there any performace consideration doing so? Does the DDL command execute slower in a trigger in an autonomous transaction