After 10.4.6 upgrade Print causes programs to quit

After upgrading to 10.4.6 I can no longer print with either an HP1320 or Epson 1280. When selecting the print command in any application (Mail,Word,Text edit,Safari,Preview) I get a message that the application unexpectedly quit. I have the latest drivers for my printers, they are connected and show up in the USB bus and I have used the Reset Printing System comand and reselected the printers. They show up in the print utility with no problems. I have repaired permissions and run Disk Warrier as well.
There were no printing problems before upgrading to 10.4.6 from 10.3.9.
Any ideas what I can do next?
Here is the begining of the error message that occurs in each of the above mentioned applications when they fail:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000034
and here are my specs:
Model: PowerMac3,1, BootROM 3.2.4f1, 1 processors, PowerPC G4 (2.7), 400 MHz, 512 MB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 128 MB, SDRAM, PC100-322S
Memory Module: DIMM1/J22, 128 MB, SDRAM, PC100-222S
Memory Module: DIMM2/J23, 256 MB, SDRAM, PC133-333
Modem: V.90
Network Service: Internal Modem, PPP (PPPSerial), ppp0
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
Parallel ATA Device: IOMEGA ZIP 100 ATAPI
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: hp LaserJet 1320 series, Hewlett-Packard, Up to 12 Mb/sec, 500 mA
USB Device: USB Printer, EPSON, Up to 12 Mb/sec, 500 mA
FireWire Device: QBP-2 Bridge, QPS, Up to 400 Mb/sec
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec
G4 Mac OS X (10.4.6)

Please re-Update using the downloaded Combination updater. (Apple downloads)
If that doesn't help, the only other thing I can recommend is to resinstall OS X using the archive & install option in the installer.

Similar Messages

Trying to print causes programs to crash, HELP!

I have MacBook pro 2.2Gz 15.4" with 10.5.2 running. I recently returned home from university and am now using my laptop at home again. I needed to print a pdf from my computer on my mom's printer. I've had no problems doing this in the past, so I proceeded as normal; I opened it in Preview, I pressed print, clicked add printer, and found her shared printer on the list. Then the program crashed, giving me this error:
http://i30.tinypic.com/29lfybt.jpg
Now every single time I try to print from preview it crashes and gives me that error. I just tried printing from Camino, and it worked once, and then proceeded to crash the program every time. I tried from microsoft word, and it crashed too. I used spotlight to search for that plugin, as well as looked in my plugins folder, and I can't find anything.
HELP!

bump, can anyone help? I cant print anymore.

Adobe PDF printer causes programs to crash

Hi, one of my users is having trouble using her Adobe PDF printer. Sporadically whenever she prints to Adobe PDF it locks up the application that was trying to print and she has to force-quit. Any suggestions?

Hello AnasaziCannibal,
Thanks for posting!
Unfortunately, you've reached the Acrobat.com forums which
are specific to the Acrobat.com website and its set of hosted
services, and do not cover the Acrobat family of desktop products.
Here is a link to the Windows Acrobat forums for you. This
will be a much better place for your post!
http://www.adobeforums.com/webx/.ee6b2f2/
Thanks!
Pete

Leopard causing programs to quit

I have installed leopard on my iMac G5 1 gig memory, when we are using the computer we are getting programs like Safari, Mail iPhoto unexpectedly quitting (4-5 times per session), I have heard mention of third party installations, what might they be? and will they cause this,?

Same Problem
Specifically Happens Every Time I:
Go into iTunes with Cover Flow On
Select all of the Songs on an Album
Right (Crtl+) Click in the Selected Songs
Think...Think...Think
Spinning Color Pinwheel
CRASH!!!
My Config:
HD: 132.88 GB Free: 60.39 GB BOOTCAMP: 15.84 GB Total & Free
2 GHz Core Duo
2 GHz 522 MrZ DDR2 SDRAM
External Monitor
Oh Wait it Crashed AGAIN! While using system profiler and trying to paste information into safari.
It seems to happen very often when I try to use shortcut Keys.
Whell I better Post this Before Safari decides that it hates me.

PrintScreen() Function Causes EXE to QUIT

Hi -
We've been using the PrintScreen() function in a CALC icon to give the participant the ability to print a report that is displayed on the screen.
We've been able to successfully use it on a number of computers, with the challenge being that an 800x600 screen size prints small on an 8.5x11 inch piece of paper. In most cases, by changing the page settings on the printer, we can get it to fill the page (depending on the printer and available print setting options).
Here's the challenge:
At one site, clicking on the Print Screen button (which contains the CALC and the PrintScreen() funtion) brings up printer settings and in this case it appears the printer may not be set up correctly....the user changes to select a new default printer...and when returning to the Authorware file they click on the Print Screen button again and it quits the Authorware program.
It's my understanding that the PrintScreen() function will print to the default printer with the default settings.
In cases where we had no printers at all installed, we get an Authorware warning...but can continue fine and the program does not quit. (It just doesn't print which makes sense.)
Apparently, they were running the EXE file over a network, so I suggested they put it directly on the hard drive. They say that the program still quits even if it is run from the hard drive.
Any suggestions as to what would cause it to quit?
Here are my thoughts so far:
1. Could there be any virus protection software that is considering the attempt to 'PrintScreen' as something 'suspicious' and it's closing the file?
2. Does the default printer get stored in Authorware's memory somehow while it's running, and the process of trying to change the printer causes it to quit?
3. Is there a better way to try to provide a printed report from Authorware than the PrintScreen function?
Thanks -
Scott

I use this feature to jump to an HTML file that is provided with the course.
When it's time to print, I read in the HTML file with ReadExtFile.
In the HTML I have already embedded some text that is to be replaced at runtime, with some simple tagging, e.g.
Congratulations , you have completed the course with a passing score of %
In Authorware I use replace functions to replace the text with the actual values stored in Authorware, for e.g.
Html:=Replace("", userName)
Then I write the HTML file to the user's profile folder, and use JumpPrintReturn to print it.
The erase the HTML file.
HTH
Steve

All Adobe apps print slowly after 10.3.9 upgrade

I have a HP Deskjet 9800 printer and have been quite happy with it for months. However, after upgrading to OS 10.3.9, all of my Adobe applications (In-Design, Acrobat, Illustrator & PhotoShop) print VERY slowly, even when set to the "fast draft" option. Strangely, MS Word & Excel are unaffected. Too bad I rarely use those programs. I had hoped to print brochures and posters as needed for my work, so this problem is really cramping my style. I am connected to the printer by USB. I know there are some similar questions out there, but have not found many helpful answers. Hope you can help!

I assume that you repaired permissions after the update.
Sometimes re-applying the update will clear up issues. Try the combo updater.
http://www.apple.com/support/downloads/macosxupdate1039.html
Sometimes it helps to reinstall the applications that are having the problem.
I have 10.3.9 and Creative Suite and have no printing issues so I don't think it is a compatability issue.
The other consideration is a font issue. How are you managing the fonts on your system?

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again.

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1654
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1652
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Printing stopped working after 10.6.5 upgrade

Hi,
after 10.6.5 upgrade I cannot print.
I cannot access the printing preferences through System Preferences.
So I cannot remove the printer driver.
Printer is a Brother MFC-325C.
Printer is not connected to the mac, but I cannot still access the preferences.
Help? Ideas?
Thanx
Luca

I'm having a similar issue Luca with a client-site.
10.6.5 (by all counts, after auditing system changes) has simply cut the communication to the Epson 3800 and Epson 3880 they have. I am in the process of downloading the Xcode Tools, and then proceeding to rebuild CUPS 1.4.4 onto the system(s) to see if that forces a resolution.
There are known issues with 10.6.5 printing and CUPS 1.4.5 as of this moment in time. None of the known issues (as in, publically acknowledged by Apple) indicate corruption of the SysPref Pane for Printers nor the inability to print at all.
If CUPS 1.4.4 flash doesn't work, I shall restore from Time Machine.
Luca-
Your next step is to reset the prefpane, and then restore from backups.

HP Officejet 6500 can't print after 10.6.6 upgrade

I have a HP Officejet 6500 and can't print after 10.6.6 upgrade. Scan copy and fax are fine. I also cannot get the HP utility to recognize the device. Connected via USB.

Same issue via ethernet.
Can print installing as printer from system preferences, but the HP utility cannot recognize the device.
Message was edited by: Angelo77

TS1967 Hi .i can not update my program . I upgrade my iPad to ios6 and after that I can't update my program .i recive a massage about this account is not in store and you should switch to us store but I don't know how can I switch to us store .

Hi .i can not update my program . I upgrade my iPad to ios6 and after that I can't update my program .i recive a massage about this account is not in store and you should switch to us store but I don't know how can I switch to us store .

Change here:
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
You must have a verified billing address & be located in the country whose store you are trying to use.

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4. I want to know if I am going to have to upgrade all graphic programs right away after buying new computer. Thanks.

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4:)
I want to know if I am going to have to upgrade all graphic programs right away after buying new computer.
Trying to weigh ALL costs involved.
Thanks for any advice!!!

Anything you have that is powerpc code only will not run on a new machine. OS X 10.8 has no support for powerpc code (universal binary programs should be fine).
Other than that warning, without knowing exactly what programs you have, and what version you are on, it is hard to say whay will or will not migrate alright.
you might need to do some web searching and check apps at sites like roaringapps or on the programs Company web site.
http://roaringapps.com/apps:table

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

After EHP6 Upgarde Picking list print out is resulting format & overlapping issues

Hi All,
We have recently upgraded our system from ECC 6.0 to EHP6 .Now when user trying to print a Picking list document then Print out is overlapping with content .
But when we check the spool the Print Priview looks good but when trying to print the content is overlapping & observed the font size is chaned i.e. the content is displayed in Bold format .
But for those spools which were created before upgarde & when we give a print then Print out is fine. So some thing happend after upgrade that causing us the Print out problem .
we are using device type HPLJ4 & try to print Picking list output and it is causing problem.
Kindly provide your suggestions.
Thanks and regards,
Dilip

Hello Peng Wen,
Thanks for your reply and yes the issue got resolved . Actually we are using a custom device type ZHPLJ4 which is a copy of HPLJ4 . But as part of Upgrade ZHPLJ4 HELVE with scalablity is no longer supported. So we have removed the entry from SE73 as it even doesnt exist in HPLJ4 . Now it is working as expected.
Thanks a lot for your replay.
Thanks and regards,
Dilip

Reader 10.0.1 not closing after sending a file to print

Hi all,
We have an application that uses the windows file handlers for printing out a report. Since upgrading to Reader X 10.0.0 or to 10.0.1 (using group policy) from Reader 8 or 9 this feature doesnt work. After Reader Opens the file prints out but leaves the reader application sitting at the screen please select a file to open. This stops the next report from being printed out until the application is closed. This is the same if you right hand click on the file in windows and select print. FIle Prints but leaves the application open. Is there some magical IT trick to correct this?? I have turned of the protected at start up. The report prints fine so I dont think it is a font issue.
Clients are WIndows XP SP3 on Domain and fully patched according to WSUS last week.
Thanks in advance

I get a message saying it can't open the patch. I have tried everything
I can think of to remove and reinstall but can't remove because it can't open the patch

After 10.4.6 upgrade Print causes programs to quit

Similar Messages

Maybe you are looking for